Jump to content

Antimony tetroxide

From Wikipedia, the free encyclopedia
(Redirected from Diantimony tetroxide)
Antimony tetroxide

α-Sb2O4

β-Sb2O4

  Sb   O
Names
IUPAC name
antimony(III,V) oxide
Identifiers
ECHA InfoCard 100.014.161 Edit this at Wikidata
UNII
Properties
SbO2; Sb2O4
Molar mass 153.7588; 307.5176 g/mol
Appearance white solid
Density 6.64 g/cm3 (orthorhombic form) [1]
Melting point > 930 °C (1,710 °F; 1,200 K) (decomposes)
Boiling point decomposes
insoluble
2.0
Structure
orthorhombic
Hazards
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
2
1
0
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 0.5 mg/m3 (as Sb)[2]
REL (Recommended)
TWA 0.5 mg/m3 (as Sb)[2]
Related compounds
Related compounds
Antimony trioxide
Antimony pentoxide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Antimony tetroxide is an inorganic compound with the formula Sb2O4. This material, which exists as the mineral cervantite,[3] is white but reversibly yellows upon heating. The material, with empirical formula SbO2, is called antimony tetroxide to signify the presence of two kinds of Sb centers.[4]

Formation and structure

[edit]

The material forms when Sb2O3 is heated in air:[5]

Sb2O3 + 0.5 O2 → Sb2O4 ΔH = −187 kJ/mol

At 800 °C, antimony(V) oxide loses oxygen to give the same material:

Sb2O5 → Sb2O4 + 0.5 O2 ΔH = −64 kJ/mol

The material is mixed valence, containing both Sb(V) and Sb(III) centers. Two polymorphs are known, one orthorhombic (shown in the infobox) and one monoclinic.[1] Both forms feature octahedral Sb(V) centers arranged in sheets with distorted Sb(III) centers bound to four oxides.

References

[edit]
  1. ^ a b Amador, J.; Puebla, E. Gutierrez; Monge, M. A.; Rasines, I.; Valero, C. Ruiz (1988). "Diantimony Tetraoxides Revisited". Inorganic Chemistry. 27 (8): 1367–1370. doi:10.1021/ic00281a011.
  2. ^ a b NIOSH Pocket Guide to Chemical Hazards. "#0036". National Institute for Occupational Safety and Health (NIOSH).
  3. ^ "Cervantite". Webminerals. Retrieved 2009-06-06.
  4. ^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 576. ISBN 978-0-08-037941-8.
  5. ^ Holleman, A. F.; Wiberg, E. "Inorganic Chemistry" Academic Press: San Diego, 2001. ISBN 0-12-352651-5.