Jump to content

GWR 4900 Class

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by SovalValtos (talk | contribs) at 13:16, 18 August 2016 (Undid revision 735069128 by Moylesy98 (talk)unsourced assertion. Please provide a source). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

GWR 4900 Class
Preserved 4953 Pitchford Hall
Type and origin
Power typeSteam
DesignerCharles Collett
BuilderGWR Swindon Works
Build date1928–1943
Total produced258 (4901 Adderley Hall-6958 Oxburgh Hall)
RebuilderGWR Swindon Works
Rebuild date1924
Number rebuilt1 (4900 Saint Martin)
Specifications
Configuration:
 • Whyte4-6-0
 • UIC2'Ch
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Leading dia.3 ft 0 in (0.914 m)
Driver dia.6 ft 0 in (1.829 m)
Minimum curve8 chains (528 ft; 161 m) normal,
7 chains (462 ft; 141 m) slow
Length63 ft 0+14 in (19.21 m) over buffers
Width8 ft 11+14 in (2.724 m)
Height13 ft 3+14 in (4.045 m)
Axle load18 long tons 19 cwt (42,400 lb or 19.3 t)
(21.2 short tons)
Adhesive weight57 long tons 0 cwt (127,700 lb or 57.9 t)
(63.8 short tons)
Loco weight75 long tons 0 cwt (168,000 lb or 76.2 t)
(84.0 short tons)
Tender weight46 long tons 14 cwt (104,600 lb or 47.4 t)
(52.3 short tons)
Fuel typeCoal
Water cap.3,500 imp gal (16,000 L; 4,200 US gal) -
4,000 imp gal (18,000 L; 4,800 US gal)
Firebox:
 • Grate area27.07 square feet (2.515 m2)
Boiler pressure225 lbf/in2 (1,550 kPa; 15.8 kgf/cm2)
Heating surface:
 • Firebox154.78 square feet (14.380 m2)
 • Tubes and flues1,686.60 square feet (156.690 m2)
Superheater:
 • Heating area262.62 square feet (24.398 m2)
CylindersTwo, outside
Cylinder size18.5 in × 30 in (470 mm × 762 mm)
Performance figures
Tractive effort27,275 lbf (121,330 N)
Career
OperatorsGWR » BR
Power classGWR: D,
BR: 5MT
Numbers4900–4999, 5900–5999, 6900–6958
Official nameHall
Axle load classGWR: Red
Withdrawn1941 (4911 Bowden Hall), 1959–1965 (remainder)
Preserved4920, 4930, 4936, 4942, 4953, 4965, 4979, 5900, 5952, 5967, 5972
DispositionTen (was eleven) preserved or extant, remainder scrapped

The Great Western Railway (GWR) 4900 Class or Hall Class is a class of 4-6-0 mixed traffic steam locomotives designed by Charles Collett. A total of 259 were built, numbered 4900–4999, 5900–5999 and 6900–6958. The LMS Stanier Class 5 4-6-0 and LNER Thompson Class B1 both drew heavily on design features of the Hall Class. After nationalisation in 1948, British Railways gave them the power classification 5MT.

Background

By the end of 1923 the GWR was well served with express passenger locomotives of the Saint and Star classes and had recently introduced the Castle Class. However the mixed traffic 2-6-0 locomotives of the 4300 Class were beginning to struggle with the increasing loads. George Jackson Churchward had recognised this with the introduction of the 4700 class 2-8-0 with 5 ft 8 in (1.727 m) driving wheels, intended for express goods and relief passenger trains. However, Collett preferred the idea of a Saint Class with smaller wheels to undertake these duties as this would provide a leading bogie. He therefore rebuilt number 2925 Saint Martin with 6 ft (1.829 m) driving wheels.[1]

Prototype

The prototype of the new class was rebuilt in 1924 and the cylinders were realigned in relation to the driving axle and a more modern 'Castle'-type cab was fitted. Saint Martin emerged from Swindon in 1924 and embarked on three years of trials. During this period Collett introduced other modifications such a changing the pitch of the taper boiler and adding outside steam pipes.

Production

After extensive trials during 1925-1927, Collett was satisfied with the performance of his prototype, subject to minor amendments and placed an order for eighty more with Swindon works (Lot 254) in 1928. The prototype was renumbered 4900 in December 1928 and the new locomotives were numbered 4901-80 and appeared at regular intervals until February 1930.[2]They were named after English and Welsh country houses with 'Hall' in their titles and so became known as the 'Hall Class'.

They differed little from the prototype; the bogie wheel diameter had been reduced by two inches from 3 ft 2 in (0.965 m) to 3 ft 0 in (0.914 m) and the valve setting amended to give an increased travel of 7.5 in (191 mm). The overall weight of the locomotive had increased by 2 long tons 10 cwt (5,600 lb or 2.5 t) to 75 long tons 0 cwt (168,000 lb or 76.2 t) but a tractive effort of 27,275 lbf (121.33 kN) compared favourably with the 24,935 lbf (110.92 kN) of the 'Saint'. The original locomotives were built with Churchward 3,500 imp gal (16,000 L; 4,200 US gal) tenders but after 4958 Collett's larger 4,000 imp gal (18,000 L; 4,800 US gal) types became standard although a few later locomotives were fitted with smaller tenders if these were available as they entered service.[3]

The first fourteen examples were despatched to the arduous proving grounds of the Cornish main line. They were so successful here and elsewhere on the GWR system that by the time the first production batch had been completed a further twenty were on order (Lot 268, 4981-99 and 5900). Further orders followed throughout the 1930s and early 1940s. By 1935, 150 were in service and the 259th and last Hall, No. 6958 Oxburgh Hall, was delivered in 1943. Thereafter further deliveries were of the '6959 Modified Hall' class.

Performance

As indicated by their continuing production, the Hall class proved to be very successful in a variety of different roles, although barred from several cross-country and branch lines because of their red weight classification. According to Peter Herring, 'they were the first true mixed traffic locomotives, and as such precursors of the Stanier 'Black Five', Thompson B1 and BR Standard 5MT 4-6-0.'[4] (This may have been true as far as 4-6-0 types were concerned but there were several successful 2-6-0 ‘mixed traffic’ types on the GWR and other British railways before them,[5] - not least the GWR 4300 Class they were designed to replace. [6])

Modified Hall Class

Main article GWR 6959 Class

Although the GWR had been at the forefront of British locomotive development between 1900 and 1930, the 1930s saw a degree of complacency at Swindon reflected in the fact that the design had largely originated in the 1900s and had not fundamentally changed since the mid 1920s.[7] Collett was replaced by F.W. Hawksworth in 1941 who created a modified version of the design, known as the Modified Hall Class. These remained in production under British Railways until 1950, by which time there were a further seventy-one locomotives.

Accidents and incidents

  • On 30 April 1941, Locomotive No. 4911 Bowden Hall took a direct hit during a bombing raid on the Keyham area of Plymouth and was later broken up.[8] The locomotive had stopped at a signal box because of an air raid, and the crew survived by sheltering under the steps of the signal box.[9] No. 4911 was one of two GWR locomotives damaged beyond repair in Britain during World War II. The other was GWR 1854 Class No. 1729. On the same day, the locomotive's relative, 4936 Kinlet Hall, accidentally ran into a bomb crater in that area and was severely damaged, but it was repaired into service and eventually acquired by the Woodham Brothers in the early 1960s. [10]
  • On 13 February 1961, Locomotive No. 6949 Haberfield Hall was in collision with a freight train that was being shunted at Baschurch, Shropshire due to a signalman's error. Three people were killed and two were injured.[11]
  • On 25 August 1962, a passenger train stopped at Torquay, Devon due to the failure of the locomotive hauling it. Locomotive No. 4932 Hatherton Hall was hauling a passenger train that overran signals and was in a rear-end collision with it. Twenty-three people were injured.[12]

Withdrawal

All but one of the original Collett Halls entered British Railways service in 1948, the exception being No. 4911 Bowden Hall. Official withdrawals began in 1959 with the prototype Saint Martin. Its accumulated mileage, both in its original form and rebuilt form, was a remarkable 2,092,500 miles. Further withdrawals of the production series took place during the 1960s and the class was extinct by 1965.

Preservation

By 1965 the last Hall had been withdrawn from the Western Region without a single one entering the National Collection. Eleven examples of the Hall class have survived to preservation, seven of which have run in preservation. Of the engines which haven't yet operated in preservation, 4942 Maindy Hall is being "regressed" back to a GWR Saint Class, 4979 Wootton Hall is undergoing restoration at The Ribble Steam Railway with work currently focusing on the engines tender, 5952 Cogan Hall is awaiting restoration at The Llangollen Railway with a small number of parts being used in the construction of 6880 Betton Grange & 5967 Bickmarsh Hall is undergoing restoration at The Northampton & Lamport Railway.

Of the remaining seven halls which have run in preservation, six have been operated on the main line: 4930 Hagley Hall, 4936 Kinlet Hall, 4953 Pitchford Hall, 4965 Rood Ashton Hall, 5900 Hinderton Hall and 5972 Olton Hall. 5972 Olton Hall has gained fame as the locomotive used in the Harry Potter film series.

4936 Kinlet Hall and 4965 Rood Ashton Hall are main line certified.[citation needed]

Number Name Image Built Withdrawn Base Status Notes
4920 Dumbleton Hall March 1929 December 1965 South Devon Railway Static display, awaiting overhaul.
4930 Hagley Hall May 1929 December 1963 Severn Valley Railway Undergoing overhaul.
4936 Kinlet Hall June 1929 January 1964 West Somerset Railway Operational, main line certified Main line Ticket (2011 - 2018). It will be withdrawn for overhaul at the end of the 2016 running season due to issues with its firebox, but will be returning to the main line.[citation needed]
4942 Maindy Hall July 1929 December 1963 Didcot Railway Centre Undergoing Reconfiguration Currently being 'regressed' back to a GWR Saint Class.
4953 Pitchford Hall August 1929 May 1963 Epping Ongar Railway. Undergoing Overhaul Boiler ticket expired August 2013
4965 Rood Ashton Hall November 1930 March 1962 Tyseley Locomotive Works. Operational, main line certified First Hall class to leave Woodham Brothers scrapyard, Barry. Main line Ticket (2009 - 2016).
4979 Wootton Hall February 1930 December 1963 Ribble Steam Railway Undergoing Restoration. Owned by Furness Railway Trust and was moved to Preston on 27 October 2014. Undergoing restoration inside the FRT's shed with the tender being restored first and then the loco getting restored to working order.
5900 Hinderton Hall March 1931 December 1963 Didcot Railway Centre, Static display, awaiting overhaul.
5952 Cogan Hall December 1935 June 1964 Llangollen Railway, Spares Donor. Some parts being used for 6880 Betton Grange, but might be restored to working order.[citation needed]
5967 Bickmarsh Hall March 1937 June 1964 Northampton & Lamport Railway Undergoing restoration.
5972 Olton Hall April 1937 December 1963 Carnforth MPD, Static Display Famed for hauling the The Hogwarts Express in the Harry Potter films, carrying Hogwarts Castle nameplates. Main line certification expired 29 August 2014. Currently on display at Warner Bros. Studios, Leavesden near Watford for a minimum of two years

References

  1. ^ le Fleming, H.M. (November 1960) [1953]. White, D.E. (ed.). The Locomotives of the Great Western Railway, part eight: Modern Passenger Classes (2nd ed.). Kenilworth: RCTS. pp. H29.
  2. ^ le Fleming, H.M. (November 1960) [1953]. White, D.E. (ed.). The Locomotives of the Great Western Railway, part eight: Modern Passenger Classes (2nd ed.). Kenilworth: RCTS. pp. H29.
  3. ^ le Fleming, H.M. (November 1960) [1953]. White, D.E. (ed.). The Locomotives of the Great Western Railway, part eight: Modern Passenger Classes (2nd ed.). Kenilworth: RCTS. pp. H30.
  4. ^ Herring, Peter (2004). Classic British Steam Locomotives. Wigston: Abbeydale Press. p. 118. ISBN 1 86147 138 6.
  5. ^ Casserley, H.C. (1960). The Historic Locomotive Pocket Book. London: Batsford. p. 217, 222.
  6. ^ Casserley, H.C. (1961). Locomotives of British Railways. London: Spring Books. p. 28.
  7. ^ Herring (2004), p.158.
  8. ^ Riley, R.C. (1966). Great Western Album. Shepperton: Ian Allan. p. 90. ISBN 0 7110 0073 5.
  9. ^ Bryan, Tim (1995). The Great Western at War 1939-1945 (1 ed.). Yeovil, Somerset, UK: Patrick Stephens. p. 94. ISBN 1-85260-479-4. OCLC 60238810.
  10. ^ Stewart-David, David; Wood, Peter (2 July 2014). "The role of railways in the Second World War". The Railway Magazine. 160 (1, 360). Horncastle, Lincs, UK: Mortons Media: 50. ISSN 0033-8923.
  11. ^ Earnshaw, Alan (1991). Trains in Trouble: Vol. 7. Penryn: Atlantic Books. p. 39. ISBN 0-906899-50-8.
  12. ^ Earnshaw, Alan (1993). Trains in Trouble: Vol. 8. Penryn: Atlantic Books. pp. Front cover, 3. ISBN 0-906899-52-4.
  • Haresnape, Brian (1978). Collett & Hawksworth Locomotives, A Pictorial History. Ian Allan Ltd. ISBN 0-7110-0869-8.
  • Whitehurst, Brian (1973). Great Western Engines, Names, Numbers, Types and Classes (1940 to Preservation). Oxford, UK: Oxford Publishing Company. pp. 42–44, 53–55, 62–63. 103, 144. ISBN 978-0-9028-8821-0. OCLC 815661.