Operating system

A layer structure showing where the Operating System is located on generally used software systems on desktops

An operating system (commonly abbreviated to either OS or O/S) is an interface between hardware and applications; it is responsible for the management and coordination of activities and the sharing of the limited resources of the computer. The operating system acts as a host for applications that are run on the machine. As a host, one of the purposes of an operating system is to handle the details of the operation of the hardware. This relieves application programs from having to manage these details and makes it easier to write applications. Almost all computers, including handheld computers, desktop computers, supercomputers, and even video game consoles, use an operating system of some type. Some of the oldest models may however use an embedded operating system, that may be contained on a compact disk or other data storage device.

Operating systems offer a number of services to application programs and users. Applications access these services through application programming interfaces (APIs) or system calls. By invoking these interfaces, the application can request a service from the operating system, pass parameters, and receive the results of the operation. Users may also interact with the operating system with some kind of software user interface (UI) like typing commands by using command line interface (CLI) or using a graphical user interface (GUI, commonly pronounced “gooey”). For hand-held and desktop computers, the user interface is generally considered part of the operating system. On large multi-user systems like Unix and Unix-like systems, the user interface is generally implemented as an application program that runs outside the operating system. (Whether the user interface should be included as part of the operating system is a point of contention.)

Common contemporary operating systems include Microsoft Windows, Mac OS, Linux, BSD and Solaris. Microsoft Windows has a significant majority of market share in the desktop and notebook computer markets, while servers generally run on Linux or other Unix-like systems. Embedded device markets are split amongst several operating systems.

Program execution

Main article: Process (computing)

The operating system acts as an interface between an application and the hardware. The user interacts with the hardware from "the other side". The operating system is a set of services which simplifies development of applications. Executing a program involves the creation of a process by the operating system. The kernel creates a process by assigning memory and other resources, establishing a priority for the process (in multi-tasking systems), loading program code into memory, and executing the program. The program then interacts with the user and/or other devices performing its intended function.

Interrupts

Main article: interrupt

Interrupts are central to operating systems as they provide an efficient way for the operating system to interact and react to its environment. The alternative is to have the operating system "watch" the various sources of input for events that require action -- not a good use of CPU resources. Interrupt-based programming is directly supported by most CPUs. Interrupts provide a computer with a way of automatically running specific code in response to events. Even very basic computers support hardware interrupts, and allow the programmer to specify code which may be run when that event takes place.

When an interrupt is received the computer's hardware automatically suspends whatever program is currently running, saves its status, and runs computer code previously associated with the interrupt. This is analogous to placing a bookmark in a book when someone is interrupted by a phone call and then taking the call. In modern operating systems interrupts are handled by the operating system's kernel. Interrupts may come from either the computer's hardware or from the running program.

When a hardware device triggers an interrupt the operating system's kernel decides how to deal with this event, generally by running some processing code. How much code gets run depends on the priority of the interrupt (for example: a person usually responds to a smoke detector alarm before answering the phone). The processing of hardware interrupts is a task that is usually delegated to software called device drivers, which may be either part of the operating system's kernel, part of another program, or both. Device drivers may then relay information to a running program by various means.

A program may also trigger an interrupt to the operating system. If a program wishes to access hardware for example, it may interrupt the operating system's kernel, which causes control to be passed back to the kernel. The kernel will then process the request. If a program wishes additional resources (or wishes to shed resources) such as memory, it will trigger an interrupt to get the kernel's attention.

Protected mode and supervisor mode

Main article: Protected mode

Main article: Supervisor mode

Modern CPUs support something called dual mode operation. CPUs with this capability use two modes: protected mode and supervisor mode, which allow certain CPU functions to be controlled and affected only by the operating system kernel. Here, protected mode does not refer specifically to the 80286 (Intel's x86 16-bit microprocessor) CPU feature, although its protected mode is very similar to it. CPUs might have other modes similar to 80286 protected mode as well, such as the virtual 8086 mode of the 80386 (Intel's x86 32-bit microprocessor or i386).

However, the term is used here more generally in operating system theory to refer to all modes which limit the capabilities of programs running in that mode, providing things like virtual memory addressing and limiting access to hardware in a manner determined by a program running in supervisor mode. Similar modes have existed in supercomputers, minicomputers, and mainframes as they are essential to fully supporting UNIX-like multi-user operating systems.

When a computer first starts up, it is automatically running in supervisor mode. The first few programs to run on the computer, being the BIOS, bootloader and the operating system have unlimited access to hardware - and this is required because, by definition, initializing a protected environment can only be done outside of one. However, when the operating system passes control to another program, it can place the CPU into protected mode.

In protected mode, programs may have access to a more limited set of the CPU's instructions. A user program may leave protected mode only by triggering an interrupt, causing control to be passed back to the kernel. In this way the operating system can maintain exclusive control over things like access to hardware and memory.

The term "protected mode resource" generally refers to one or more CPU registers, which contain information that the running program isn't allowed to alter. Attempts to alter these resources generally causes a switch to supervisor mode, where the operating system can deal with the illegal operation the program was attempting (for example, by killing the program).

Memory management

Main article: memory protection

Among other things, a multiprogramming operating system kernel must be responsible for managing all system memory which is currently in use by programs. This ensures that a program does not interfere with memory already used by another program. Since programs time share, each program must have independent access to memory.

Cooperative memory management, used by many early operating systems assumes that all programs make voluntary use of the kernel's memory manager, and do not exceed their allocated memory. This system of memory management is almost never seen anymore, since programs often contain bugs which can cause them to exceed their allocated memory. If a program fails it may cause memory used by one or more other programs to be affected or overwritten. Malicious programs, or viruses may purposefully alter another program's memory or may affect the operation of the operating system itself. With cooperative memory management it takes only one misbehaved program to crash the system.

Memory protection enables the kernel to limit a process' access to the computer's memory. Various methods of memory protection exist, including memory segmentation and paging. All methods require some level of hardware support (such as the 80286 MMU) which doesn't exist in all computers.

In both segmentation and paging, certain protected mode registers specify to the CPU what memory address it should allow a running program to access. Attempts to access other addresses will trigger an interrupt which will cause the CPU to re-enter supervisor mode, placing the kernel in charge. This is called a segmentation violation or Seg-V for short, and since it is both difficult to assign a meaningful result to such an operation, and because it is usually a sign of a misbehaving program, the kernel will generally resort to terminating the offending program, and will report the error.

Windows 3.1-Me had some level of memory protection, but programs could easily circumvent the need to use it. Under Windows 9x all MS-DOS applications ran in supervisor mode, giving them almost unlimited control over the computer. A general protection fault would be produced indicating a segmentation violation had occurred, however the system would often crash anyway.

In most Linux systems, part of the hard disk is reserved for virtual memory when the Operating system is being installed on the system. This part is known as swap space. Windows systems use a swap file instead of a partition.

Virtual memory

The use of virtual memory addressing (such as paging or segmentation) means that the kernel can choose what memory each program may use at any given time, allowing the operating system to use the same memory locations for multiple tasks.

If a program tries to access memory that isn't in its current range of accessible memory, but nonetheless has been allocated to it, the kernel will be interrupted in the same way as it would if the program were to exceed its allocated memory. (See section on memory management.) Under UNIX this kind of interrupt is referred to as a page fault.

When the kernel detects a page fault it will generally adjust the virtual memory range of the program which triggered it, granting it access to the memory requested. This gives the kernel discretionary power over where a particular application's memory is stored, or even whether or not it has actually been allocated yet.

In modern operating systems, application memory which is accessed less frequently can be temporarily stored on disk or other media to make that space available for use by other programs. This is called swapping, as an area of memory can be used by multiple programs, and what that memory area contains can be swapped or exchanged on demand.

Further information: Page fault

Multitasking

Main article: Computer multitasking

Main article: Process management (computing)

Multitasking refers to the running of multiple independent computer programs on the same computer, giving the appearance that it is performing the tasks at the same time. Since most computers can do at most one or two things at one time, this is generally done via time sharing, which means that each program uses a share of the computer's time to execute.

An operating system kernel contains a piece of software called a scheduler which determines how much time each program will spend executing, and in which order execution control should be passed to programs. Control is passed to a process by the kernel, which allows the program access to the CPU and memory. At a later time control is returned to the kernel through some mechanism, so that another program may be allowed to use the CPU. This so-called passing of control between the kernel and applications is called a context switch.

An early model which governed the allocation of time to programs was called cooperative multitasking. In this model, when control is passed to a program by the kernel, it may execute for as long as it wants before explicitly returning control to the kernel. This means that a malicious or malfunctioning program may not only prevent any other programs from using the CPU, but it can hang the entire system if it enters an infinite loop.

The philosophy governing preemptive multitasking is that of ensuring that all programs are given regular time on the CPU. This implies that all programs must be limited in how much time they are allowed to spend on the CPU without being interrupted. To accomplish this, modern operating system kernels make use of a timed interrupt. A protected mode timer is set by the kernel which triggers a return to supervisor mode after the specified time has elapsed. (See above sections on Interrupts and Dual Mode Operation.)

On many single user operating systems cooperative multitasking is perfectly adequate, as home computers generally run a small number of well tested programs. Windows NT was the first version of Microsoft Windows which enforced preemptive multitasking, but it didn't reach the home user market until Windows XP, (since Windows NT was targeted at professionals.)

Further information: Context switch

Further information: Preemptive multitasking

Further information: Cooperative multitasking

Disk access and file systems

Main article: Virtual file system

Access to files stored on disks is a central feature of all operating systems. Computers store data on disks using files, which are structured in specific ways in order to allow for faster access, higher reliability, and to make better use out of the drive's available space. The specific way in which files are stored on a disk is called a file system, and enables files to have names and attributes. It also allows them to be stored in a hierarchy of directories or folders arranged in a directory tree.

Early operating systems generally supported a single type of disk drive and only one kind of file system. Early file systems were limited in their capacity, speed, and in the kinds of file names and directory structures they could use. These limitations often reflected limitations in the operating systems they were designed for, making it very difficult for an operating system to support more than one file system.

While many simpler operating systems support a limited range of options for accessing storage systems, operating systems like UNIX and Linux support a technology known as a virtual file system or VFS. An operating system like UNIX supports a wide array of storage devices, regardless of their design or file systems to be accessed through a common application programming interface (API). This makes it unnecessary for programs to have any knowledge about the device they are accessing. A VFS allows the operating system to provide programs with access to an unlimited number of devices with an infinite variety of file systems installed on them through the use of specific device drivers and file system drivers.

A connected storage device such as a hard drive is accessed through a device driver. The device driver understands the specific language of the drive and is able to translate that language into a standard language used by the operating system to access all disk drives. On UNIX this is the language of block devices.

When the kernel has an appropriate device driver in place, it can then access the contents of the disk drive in raw format, which may contain one or more file systems. A file system driver is used to translate the commands used to access each specific file system into a standard set of commands that the operating system can use to talk to all file systems. Programs can then deal with these file systems on the basis of filenames, and directories/folders, contained within a hierarchical structure. They can create, delete, open, and close files, as well as gather various information about them, including access permissions, size, free space, and creation and modification dates.

Various differences between file systems make supporting all file systems difficult. Allowed characters in file names, case sensitivity, and the presence of various kinds of file attributes makes the implementation of a single interface for every file system a daunting task. Operating systems tend to recommend the use of (and so support natively) file systems specifically designed for them; for example, NTFS in Windows and ext3 and ReiserFS in Linux. However, in practice, third party drives are usually available to give support for the most widely used filesystems in most general-purpose operating systems (for example, NTFS is available in Linux through NTFS-3g, and ext2/3 and ReiserFS are available in Windows through FS-driver and rfstool).

Device drivers

Main article: Device driver

A device driver is a specific type of computer software developed to allow interaction with hardware devices. Typically this constitutes an interface for communicating with the device, through the specific computer bus or communications subsystem that the hardware is connected to, providing commands to and/or receiving data from the device, and on the other end, the requisite interfaces to the operating system and software applications. It is a specialized hardware-dependent computer program which is also operating system specific that enables another program, typically an operating system or applications software package or computer program running under the operating system kernel, to interact transparently with a hardware device, and usually provides the requisite interrupt handling necessary for any necessary asynchronous time-dependent hardware interfacing needs.

The key design goal of device drivers is abstraction. Every model of hardware (even within the same class of device) is different. Newer models also are released by manufacturers that provide more reliable or better performance and these newer models are often controlled differently. Computers and their operating systems cannot be expected to know how to control every device, both now and in the future. To solve this problem, OSes essentially dictate how every type of device should be controlled. The function of the device driver is then to translate these OS mandated function calls into device specific calls. In theory a new device, which is controlled in a new manner, should function correctly if a suitable driver is available. This new driver will ensure that the device appears to operate as usual from the operating systems' point of view for any person.

Networking

Main article: Computer network

Currently most operating systems support a variety of networking protocols, hardware, and applications for using them. This means that computers running dissimilar operating systems can participate in a common network for sharing resources such as computing, files, printers, and scanners using either wired or wireless connections. Networks can essentially allow a computer's operating system to access the resources of a remote computer to support the same functions as it could if those resources were connected directly to the local computer. This includes everything from simple communication, to using networked file systems or even sharing another computer's graphics or sound hardware. Some network services allow the resources of a computer to be accessed transparently, such as SSH which allows networked users direct access to a computer's command line interface.

Client/server networking involves a program on a computer somewhere which connects via a network to another computer, called a server. Servers, usually running UNIX or Linux, offer (or host) various services to other network computers and users. These services are usually provided through ports or numbered access points beyond the server's network address. Each port number is usually associated with a maximum of one running program, which is responsible for handling requests to that port. A daemon, being a user program, can in turn access the local hardware resources of that computer by passing requests to the operating system kernel.

Many operating systems support one or more vendor-specific or open networking protocols as well, for example, SNA on IBM systems, DECnet on systems from Digital Equipment Corporation, and Microsoft-specific protocols (SMB) on Windows. Specific protocols for specific tasks may also be supported such as NFS for file access. Protocols like ESound, or esd can be easily extended over the network to provide sound from local applications, on a remote system's sound hardware.

Security

Main article: computer security

A computer being secure depends on a number of technologies working properly. A modern operating system provides access to a number of resources, which are available to software running on the system, and to external devices like networks via the kernel.

The operating system must be capable of distinguishing between requests which should be allowed to be processed, and others which should not be processed. While some systems may simply distinguish between "privileged" and "non-privileged", systems commonly have a form of requester identity, such as a user name. To establish identity there may be a process of authentication. Often a username must be quoted, and each username may have a password. Other methods of authentication, such as magnetic cards or biometric data, might be used instead. In some cases, especially connections from the network, resources may be accessed with no authentication at all (such as reading files over a network share).

In addition to the allow/disallow model of security, a system with a high level of security will also offer auditing options. These would allow tracking of requests for access to resources (such as, "who has been reading this file?"). Internal security, or security from an already running program is only possible if all possibly harmful requests must be carried out through interrupts to the operating system kernel. If programs can directly access hardware and resources, they cannot be secured.

External security involves a request from outside the computer, such as a login at a connected console or some kind of network connection. External requests are often passed through device drivers to the operating system's kernel, where they can be passed onto applications, or carried out directly. Security of operating systems has long been a concern because of highly sensitive data held on computers, both of a commercial and military nature. The United States Government Department of Defense (DoD) created the Trusted Computer System Evaluation Criteria (TCSEC) which is a standard that sets basic requirements for assessing the effectiveness of security. This became of vital importance to operating system makers, because the TCSEC was used to evaluate, classify and select computer systems being considered for the processing, storage and retrieval of sensitive or classified information.

Network services include offerings such as file sharing, print services, email, web sites, and file transfer protocols (FTP), most of which can have compromised security. At the front line of security are hardware devices known as firewalls or intrusion detection/prevention systems. At the operating system level, there are a number of software firewalls available, as well as intrusion detection/prevention systems. Most modern operating systems include a software firewall, which is enabled by default. A software firewall can be configured to allow or deny network traffic to or from a service or application running on the operating system. Therefore, one can install and be running an insecure service, such as Telnet or FTP, and not have to be threatened by a security breach because the firewall would deny all traffic trying to connect to the service on that port.

An alternative strategy, and the only sandbox strategy available in systems that do not meet the Popek and Goldberg virtualization requirements, is the operating system not running user programs as native code, but instead either emulates a processor or provides a host for a p-code based system such as Java.

Internal security is especially relevant for multi-user systems; it allows each user of the system to have private files that the other users cannot tamper with or read. Internal security is also vital if auditing is to be of any use, since a program can potentially bypass the operating system, inclusive of bypassing auditing.

Example: Microsoft Windows

While the Windows 9x series offered the option of having profiles for multiple users, they had no concept of access privileges, and did not allow concurrent access; and so were not true multi-user operating systems. In addition, they implemented only partial memory protection. They were accordingly widely criticised for lack of security.

The Windows NT series of operating systems, by contrast, are true multi-user, and implement absolute memory protection. However, a lot of the advantages of being a true multi-user operating system were nullified by the fact that, prior to Windows Vista, the first user account created during the setup process was an administrator account, which was also the default for new accounts. Though Windows XP did have limited accounts, the majority of home users did not change to an account type with fewer rights – partially due to the number of programs which unnecessarily required administrator rights – and so most home users ran as administrator all the time.

Windows Vista changes this by introducing a privilege elevation system called User Account Control. When logging in as a standard user, a logon session is created and a token containing only the most basic privileges is assigned. In this way, the new logon session is incapable of making changes that would affect the entire system. When logging in as a user in the Administrators group, two separate tokens are assigned. The first token contains all privileges typically awarded to an administrator, and the second is a restricted token similar to what a standard user would receive. User applications, including the Windows Shell, are then started with the restricted token, resulting in a reduced privilege environment even under an Administrator account. When an application requests higher privileges or "Run as administrator" is clicked, UAC will prompt for confirmation and, if consent is given (including administrator credentials if the account requesting the elevation is not a member of the administrators group), start the process using the unrestricted token.

Example: Linux/Unix

Linux and UNIX both have two tier security, which limits any system-wide changes to the root user, a special user account on all UNIX-like systems. While the root user has virtually unlimited permission to affect system changes, programs running as a regular user are limited in where they can save files, what hardware they can access, etc. In many systems, a user's memory usage, their selection of available programs, their total disk usage or quota, available range of programs' priority settings, and other functions can also be locked down. This provides the user with plenty of freedom to do what needs done, without being able to put any part of the system in jeopardy (barring accidental triggering of system-level bugs) or make sweeping, system-wide changes. The user's settings are stored in an area of the computer's file system called the user's home directory, which is also provided as a location where the user may store their work, similar to My Documents on a Windows system. Should a user have to install software or make system-wide changes, they must become the root user temporarily, usually with the su or sudo command, which is answered with the computer's root password when prompted. Some systems (such as Ubuntu and its derivatives) are configured by default to allow select users to run programs as the root user via the sudo command, using the user's own password for authentication instead of the system's root password. One is sometimes said to "go root" when elevating oneself to root access.

For more information on the differences between the Linux su/sudo approach and Vista's User Account Control, see Comparison of privilege authorization features.

File system support in modern operating systems

Support for file systems is highly varied among modern operating systems although there are several common file systems which almost all operating systems include support and drivers for.

Solaris

The SUN Microsystems Solaris Operating System in earlier releases defaulted to (non-journaled or non-logging) UFS for bootable and supplementary file systems. Solaris (as most Operating Systems based upon Open Standards and/or Open Source) defaulted to, supported, and extended UFS.

Support for other file systems and significant enhancements were added over time, including Veritas Software Corp. (Journaling) VxFS, SUN Microsystems (Clustering) QFS, SUN Microsystems (Journaling) UFS, and SUN Microsystems (open source, poolable, 128 bit compressible, and error-correcting) ZFS.

Kernel extensions were added to Solaris to allow for bootable Veritas VxFS operation. Logging or Journaling was added to UFS in SUN's Solaris 7. Releases of Solaris 10, Solaris Express, OpenSolaris, and other Open Source variants of Solaris Operating System later supported bootable ZFS.

Logical Volume Management allows for spanning a file system across multiple devices for the purpose of adding redundancy, capacity, and/or throughput. Legacy environments in Solaris may use Solaris Volume Manager (formerly known as Solstice DiskSuite.) Multiple operating systems (including Solaris) may use Veritas Volume Manager. Modern Solaris based Operating Systems eclipse the need for Volume Management through leveraging virtual storage pools in ZFS.

Linux

Many Linux distributions support some or all of ext2, ext3, ext4, ReiserFS, Reiser4, JFS , XFS , GFS, GFS2, OCFS, OCFS2, and NILFS. The ext file systems, namely ext2, ext3 and ext4 are based on the original Linux file system. Others have been developed by companies to meet their specific needs, hobbyists, or adapted from UNIX, Microsoft Windows, and other operating systems. Linux has full support for XFS and JFS, along with FAT (the MS-DOS file system), and HFS which is the primary file system for the Macintosh.

In recent years support for Microsoft Windows NT's NTFS file system has appeared in Linux, and is now comparable to the support available for other native UNIX file systems. ISO 9660 and UDF are supported which are standard file systems used on CDs, DVDs, and BluRay discs. It is possible to install Linux on the majority of these file systems. Unlike other operating systems, Linux and UNIX allow any file system to be used regardless of the media it is stored on, whether it is a hard drive, CD or DVD, or even contained within a file located on another file system.

Microsoft Windows

Microsoft Windows currently supports NTFS and FAT file systems, along with network file systems shared from other computers, and the ISO 9660 and UDF filesystems used for CDs, DVDs, and other optical discs such as BluRay. Under Windows each file system is usually limited in application to certain media, for example CDs must use ISO 9660 or UDF, and as of Windows Vista, NTFS is the only file system which the operating system can be installed on. Windows Embedded CE 6.0, Windows Vista Service Pack 1, and Windows Server 2008 support ExFAT, a file system more suitable for flash drives.I run this bitch by Candcae Parker.

Mac OS X

Mac OS X supports HFS+ with journaling as its primary file system. It is derived from the Hierarchical File System of the earlier Mac OS. Mac OS X has facilities to read and write FAT, NTFS (only read, although an open-source cross plataform implementation known as NTFS 3G provides read-write support to Microsoft Windows NTFS file system for Mac OS X users.), UDF, and other file systems, but cannot be installed to them. Due to its UNIX heritage Mac OS X now supports virtually all the file systems supported by the UNIX VFS. Recently Apple Inc. started work on porting Sun Microsystem's ZFS filesystem to Mac OS X and preliminary support is already available in Mac OS X 10.5.

Special-purpose file systems

FAT file systems are commonly found on floppy disks, flash memory cards, digital cameras, and many other portable devices because of their relative simplicity. Performance of FAT compares poorly to most other file systems as it uses overly simplistic data structures, making file operations time-consuming, and makes poor use of disk space in situations where many small files are present. ISO 9660 and Universal Disk Format are two common formats that target Compact Discs and DVDs. Mount Rainier is a newer extension to UDF supported by Linux 2.6 kernels and Windows Vista that facilitates rewriting to DVDs in the same fashion as has been possible with floppy disks.

Journalized file systems

File systems may provide journaling, which provides safe recovery in the event of a system crash. A journaled file system writes some information twice: first to the journal, which is a log of file system operations, then to its proper place in the ordinary file system. Journaling is handled by the file system driver, and keeps track of each operation taking place that changes the contents of the disk. In the event of a crash, the system can recover to a consistent state by replaying a portion of the journal. Many UNIX file systems provide journaling including ReiserFS, JFS, and Ext3.

In contrast, non-journaled file systems typically need to be examined in their entirety by a utility such as fsck or chkdsk for any inconsistencies after an unclean shutdown. Soft updates is an alternative to journaling that avoids the redundant writes by carefully ordering the update operations. Log-structured file systems and ZFS also differ from traditional journaled file systems in that they avoid inconsistencies by always writing new copies of the data, eschewing in-place updates.

Graphical user interfaces

Most modern computer systems support graphical user interfaces (GUI), and often include them. In some computer systems, such as the original implementations of Microsoft Windows and the Mac OS, the GUI is integrated into the kernel.

While technically a graphical user interface is not an operating system service, incorporating support for one into the operating system kernel can allow the GUI to be more responsive by reducing the number of context switches required for the GUI to perform its output functions. Other operating systems are modular, separating the graphics subsystem from the kernel and the Operating System. In the 1980s UNIX, VMS and many others had operating systems that were built this way. Linux and Mac OS X are also built this way. Modern releases of Microsoft Windows such as Windows Vista implement a graphics subsystem that is mostly in user-space, however versions between Windows NT 4.0 and Windows Server 2003's graphics drawing routines exist mostly in kernel space. Windows 9x had very little distinction between the interface and the kernel.

Many computer operating systems allow the user to install or create any user interface they desire. The X Window System in conjunction with GNOME or KDE is a commonly-found setup on most Unix and Unix-like (BSD, Linux, Minix) systems. A number of Windows shell replacements have been released for Microsoft Windows, which offer alternatives to the included Windows shell, but the shell itself cannot be separated from Windows.

Numerous Unix-based GUIs have existed over time, most derived from X11. Competition among the various vendors of Unix (HP, IBM, Sun) led to much fragmentation, though an effort to standardize in the 1990s to COSE and CDE failed for the most part due to various reasons, eventually eclipsed by the widespread adoption of GNOME and KDE. Prior to open source-based toolkits and desktop environments, Motif was the prevalent toolkit/desktop combination (and was the basis upon which CDE was developed).

Graphical user interfaces evolve over time. For example, Windows has modified its user interface almost every time a new major version of Windows is released, and the Mac OS GUI changed dramatically with the introduction of Mac OS X in 2001.

History

Main article: History of operating systems

The first computers did not have operating systems. By the early 1960s, commercial computer vendors were supplying quite extensive tools for streamlining the development, scheduling, and execution of jobs on batch processing systems. Examples were produced by UNIVAC and Control Data Corporation, amongst others.

The operating systems originally deployed on mainframes, and, much later, the original microcomputer operating systems, only supported one program at a time, requiring only a very basic scheduler. Each program was in complete control of the machine while it was running. Multitasking (timesharing) first came to mainframes in the 1960s.

In 1969-70, UNIX first appeared on the PDP-7 and later the PDP-11. It soon became capable of providing cross-platform time sharing using preemptive multitasking, advanced memory management, memory protection, and a host of other advanced features. UNIX soon gained popularity as an operating system for mainframes and minicomputers alike.

MS-DOS provided many operating system like features, such as disk access. However, many DOS programs bypassed it entirely and ran directly on hardware. IBM's version, PC DOS, ran on IBM microcomputers, including the IBM PC and the IBM PC XT, and MS-DOS came into widespread use on clones of these machines.

IBM PC compatibles could also run Microsoft Xenix, a UNIX-like operating system from the early 1980s. Xenix was heavily marketed by Microsoft as a multi-user alternative to its single user MS-DOS operating system. The CPUs of these personal computers could not facilitate kernel memory protection or provide dual mode operation, so Microsoft Xenix relied on cooperative multitasking and had no protected memory.

The 80286-based IBM PC AT was the first IBM compatible personal computer capable of using dual mode operation, and providing memory protection. However, the adoption of these features by software vendors was delayed due to numerous bugs in their implementation on the 286, and were only widely accepted with the release of the Intel 80386.

Classic Mac OS, and Microsoft Windows 1.0-3.11 supported only cooperative multitasking (Windows 95, 98, & ME supported preemptive multitasking only when running 32-bit applications, but ran legacy 16-bit applications using cooperative multitasking), and were very limited in their abilities to take advantage of protected memory. Application programs running on these operating systems must yield CPU time to the scheduler when they are not using it, either by default, or by calling a function.

Windows NT's underlying operating system kernel which was a designed by essentially the same team as Digital Equipment Corporation's VMS, a UNIX-like operating system which provided protected mode operation for all user programs, kernel memory protection, preemptive multi-tasking, virtual file system support, and a host of other features.

Classic AmigaOS and versions of Microsoft Windows from Windows 1.0 through Windows Me did not properly track resources allocated by processes at runtime. If a process had to be terminated, the resources might not be freed up for new programs until the machine was restarted.

The AmigaOS did have preemptive multitasking.

Mainframes

Through the 1960s, many major features were pioneered in the field of operating systems. The development of the IBM System/360 produced a family of mainframe computers available in widely differing capacities and price points, for which a single operating system OS/360 was planned (rather than developing ad-hoc programs for every individual model). This concept of a single OS spanning an entire product line was crucial for the success of System/360 and, in fact, IBM`s current mainframe operating systems are distant descendants of this original system; applications written for the OS/360 can still be run on modern machines. In the mid-70's, the MVS, the descendant of OS/360 offered the first implementation of using RAM as a transparent cache for disk resident data.

OS/360 also pioneered a number of concepts that, in some cases, are still not seen outside of the mainframe arena. For instance, in OS/360, when a program is started, the operating system keeps track of all of the system resources that are used including storage, locks, data files, and so on. When the process is terminated for any reason, all of these resources are re-claimed by the operating system. An alternative CP-67 system started a whole line of operating systems focused on the concept of virtual machines.

Control Data Corporation developed the SCOPE operating system in the 1960s, for batch processing. In cooperation with the University of Minnesota, the KRONOS and later the NOS operating systems were developed during the 1970s, which supported simultaneous batch and timesharing use. Like many commercial timesharing systems, its interface was an extension of the Dartmouth BASIC operating systems, one of the pioneering efforts in timesharing and programming languages. In the late 1970s, Control Data and the University of Illinois developed the PLATO operating system, which used plasma panel displays and long-distance time sharing networks. Plato was remarkably innovative for its time, featuring real-time chat, and multi-user graphical games.

Burroughs Corporation introduced the B5000 in 1961 with the MCP, (Master Control Program) operating system. The B5000 was a stack machine designed to exclusively support high-level languages with no machine language or assembler, and indeed the MCP was the first OS to be written exclusively in a high-level language – ESPOL, a dialect of ALGOL. MCP also introduced many other ground-breaking innovations, such as being the first commercial implementation of virtual memory. MCP is still in use today in the Unisys ClearPath/MCP line of computers.

UNIVAC, the first commercial computer manufacturer, produced a series of EXEC operating systems. Like all early main-frame systems, this was a batch-oriented system that managed magnetic drums, disks, card readers and line printers. In the 1970s, UNIVAC produced the Real-Time Basic (RTB) system to support large-scale time sharing, also patterned after the Dartmouth BASIC system.

General Electric and MIT developed General Electric Comprehensive Operating Supervisor (GECOS), which introduced the concept of ringed security privilege levels. After acquisition by Honeywell it was renamed to General Comprehensive Operating System (GCOS).

Digital Equipment Corporation developed many operating systems for its various computer lines, including TOPS-10 and TOPS-20 time sharing systems for the 36-bit PDP-10 class systems. Prior to the widespread use of UNIX, TOPS-10 was a particularly popular system in universities, and in the early ARPANET community.

In the late 1960s through the late 1970s, several hardware capabilities evolved that allowed similar or ported software to run on more than one system. Early systems had utilized microprogramming to implement features on their systems in order to permit different underlying architecture to appear to be the same as others in a series. In fact most 360's after the 360/40 (except the 360/165 and 360/168) were microprogrammed implementations. But soon other means of achieving application compatibility were proven to be more significant.

The enormous investment in software for these systems made since 1960s caused most of the original computer manufacturers to continue to develop compatible operating systems along with the hardware. The notable supported mainframe operating systems include:

• Burroughs MCP – B5000,1961 to Unisys Clearpath/MCP, present.
• IBM OS/360 – IBM System/360, 1966 to IBM z/OS, present.
• IBM CP-67 – IBM System/360, 1967 to IBM z/VM, present.
• UNIVAC EXEC 8 – UNIVAC 1108, 1964, to Unisys Clearpath IX, present.

Microcomputers

The first microcomputers did not have the capacity or need for the elaborate operating systems that had been developed for mainframes and minis; minimalistic operating systems were developed, often loaded from ROM and known as Monitors. One notable early disk-based operating system was CP/M, which was supported on many early microcomputers and was closely imitated in MS-DOS, which became wildly popular as the operating system chosen for the IBM PC (IBM's version of it was called IBM DOS or PC DOS), its successors making Microsoft one of the world's most profitable companies. In the 80's Apple Computer Inc. (now Apple Inc.) abandoned its popular Apple II series of microcomputers to introduce the Apple Macintosh computer with an innovative Graphical User Interface (GUI) to the Mac OS.

The introduction of the Intel 80386 CPU chip with 32-bit architecture and paging capabilities, provided personal computers with the ability to run multitasking operating systems like those of earlier minicomputers and mainframes. Microsoft responded to this progress by hiring Dave Cutler, who had developed the VMS operating system for Digital Equipment Corporation. He would lead the development of the Windows NT operating system, which continues to serve as the basis for Microsoft's operating systems line. Steve Jobs, a co-founder of Apple Inc., started NeXT Computer Inc., which developed the Unix-like NEXTSTEP operating system. NEXTSTEP would later be acquired by Apple Inc. and used, along with code from FreeBSD as the core of Mac OS X.

Minix, an academic teaching tool which could be run on early PCs, would inspire another reimplementation of Unix, called Linux. Started by computer student Linus Torvalds with cooperation from volunteers over the internet, developed a kernel which was combined with the tools from the GNU Project. The Berkeley Software Distribution, known as BSD, is the UNIX derivative distributed by the University of California, Berkeley, starting in the 1970s. Freely distributed and ported to many minicomputers, it eventually also gained a following for use on PCs, mainly as FreeBSD, NetBSD and OpenBSD.

Examples

Microsoft Windows

The Microsoft Windows family of operating systems originated as an add-on to the older MS-DOS operating system for the IBM PC. Modern versions are based on the newer Windows NT kernel that was originally intended for OS/2. Windows runs on x86, x86-64 and Itanium processors. Earlier versions also ran on the DEC Alpha, MIPS, Fairchild (later Intergraph) Clipper and PowerPC architectures (some work was done to port it to the SPARC architecture).

As of June 2008, Microsoft Windows holds a large amount of the worldwide desktop market share. Windows is also used on servers, supporting applications such as web servers and database servers. In recent years, Microsoft has spent significant marketing and research & development money to demonstrate that Windows is capable of running any enterprise application, which has resulted in consistent price/performance records (see the TPC) and significant acceptance in the enterprise market.

The most widely used version of the Microsoft Windows family is Windows XP, released on October 25, 2001.

In November 2006, after more than five years of development work, Microsoft released Windows Vista, a major new operating system version of Microsoft Windows family which contains a large number of new features and architectural changes. Chief amongst these are a new user interface and visual style called Windows Aero, a number of new security features such as User Account Control, and few new multimedia applications such as Windows DVD Maker. A server variant based on the same kernel, Windows Server 2008, was released in early 2008.

Windows 7 is currently under development; Microsoft has stated that it intends to scope its development to a three-year timeline, placing its release sometime after mid-2009.

Plan 9

Ken Thompson, Dennis Ritchie and Douglas McIlroy at Bell Labs designed and developed the C programming language to build the operating system Unix. Programmers at Bell Labs went on to develop Plan 9 and Inferno, which were engineered for modern distributed environments. Plan 9 was designed from the start to be a networked operating system, and had graphics built-in, unlike Unix, which added these features to the design later. Plan 9 has yet to become as popular as Unix derivatives, but it has an expanding community of developers. It is currently released under the Lucent Public License. Inferno was sold to Vita Nuova Holdings and has been released under a GPL/MIT license.

Unix and Unix-like operating systems

Ken Thompson wrote B, mainly based on BCPL, which he used to write Unix, based on his experience in the MULTICS project. B was replaced by C, and Unix developed into a large, complex family of inter-related operating systems which have been influential in every modern operating system (see History).

The Unix-like family is a diverse group of operating systems, with several major sub-categories including System V, BSD, and Linux. The name "UNIX" is a trademark of The Open Group which licenses it for use with any operating system that has been shown to conform to their definitions. "Unix-like" is commonly used to refer to the large set of operating systems which resemble the original Unix.

Unix-like systems run on a wide variety of machine architectures. They are used heavily for servers in business, as well as workstations in academic and engineering environments. Free software Unix variants, such as GNU, Linux and BSD, are popular in these areas.

Market share statistics for freely available operating systems are usually inaccurate since most free operating systems are not purchased, making usage under-represented. On the other hand, market share statistics based on total downloads of free operating systems are often inflated, as there is no economic disincentive to acquire multiple operating systems so users can download multiple systems, test them, and decide which they like best.

Some Unix variants like HP's HP-UX and IBM's AIX are designed to run only on that vendor's hardware. Others, such as Solaris, can run on multiple types of hardware, including x86 servers and PCs. Apple's Mac OS X, a hybrid kernel-based BSD variant derived from NeXTSTEP, Mach, and FreeBSD, has replaced Apple's earlier (non-Unix) Mac OS.

Unix interoperability was sought by establishing the POSIX standard. The POSIX standard can be applied to any operating system, although it was originally created for various Unix variants.

Mac OS X

Mac OS X is a line of proprietary, graphical operating systems developed, marketed, and sold by Apple Inc., the latest of which is pre-loaded on all currently shipping Macintosh computers. Mac OS X is the successor to the original Mac OS, which had been Apple's primary operating system since 1984. Unlike its predecessor, Mac OS X is a UNIX operating system built on technology that had been developed at NeXT through the second half of the 1980s and up until Apple purchased the company in early 1997.

The operating system was first released in 1999 as Mac OS X Server 1.0, with a desktop-oriented version (Mac OS X v10.0) following in March 2001. Since then, five more distinct "end-user" and "server" editions of Mac OS X have been released, the most recent being Mac OS X v10.5, which was first made available in October 2007. Releases of Mac OS X are named after big cats; Mac OS X v10.5 is usually referred to by Apple and users as "Leopard".

The server edition, Mac OS X Server, is architecturally identical to its desktop counterpart but usually runs on Apple's line of Macintosh server hardware. Mac OS X Server includes workgroup management and administration software tools that provide simplified access to key network services, including a mail transfer agent, a Samba server, an LDAP server, a domain name server, and others.

Real-time operating systems

Main article: real-time operating system

A real-time operating system (RTOS) is a multitasking operating system intended for applications with fixed deadlines (real-time computing). Such applications include some small embedded systems, automobile engine controllers, industrial robots, spacecraft, industrial control, and some large-scale computing systems.

An early example of a large-scale real-time operating system was Transaction Processing Facility developed by American Airlines and IBM for the Sabre Airline Reservations System.

Embedded systems

Main article: list of operating systems § Microcontroller, Real-time

Embedded systems use a variety of dedicated operating systems. In some cases, the "operating system" software is directly linked to the application to produce a monolithic special-purpose program. In the simplest embedded systems, there is no distinction between the OS and the application.

Embedded systems that have fixed deadlines use a real-time operating system such as VxWorks, eCos, QNX, MontaVista Linux and RTLinux.

Some embedded systems use operating systems such as Symbian OS, Palm OS, Windows CE, BSD, and Linux, although such operating systems do not support real-time computing.

Windows CE shares similar APIs to desktop Windows but shares none of desktop Windows' codebase.

Hobby development

Operating system development, or OSDev for short, as a hobby has a large cult-like following. As such, operating systems, such as Linux, have derived from hobby operating system projects. The design and implementation of an operating system requires skill and determination, and the term can cover anything from a basic "Hello World" boot loader to a fully featured kernel. One classical example of this is the Minix Operating System—an OS that was designed by A.S. Tanenbaum as a teaching tool but was heavily used by hobbyists before Linux eclipsed it in popularity.

Other

Older operating systems which are still used in niche markets include OS/2 from IBM; Mac OS, the non-Unix precursor to Apple's Mac OS X; BeOS; XTS-300. Some, most notably AmigaOS and RISC OS, continue to be developed as minority platforms for enthusiast communities and specialist applications. OpenVMS formerly from DEC, is still under active development by Hewlett-Packard.

Research and development of new operating systems continues. GNU Hurd is designed to be backwards compatible with Unix, but with enhanced functionality and a microkernel architecture. Singularity is a project at Microsoft Research to develop an operating system with better memory protection based on the.Net managed code model. Systems development follows the same model used by other Software development, which involves maintainers, version control "trees", forks, "patches", and specifications. From the AT&T-Berkeley lawsuit the new unencumbered systems were based on 4.4BSD which forked as FreeBSD and NetBSD efforts to replace missing code after the Unix wars. Recent forks include DragonFly BSD and Darwin from BSD Unix.

Kernel Preemption

In recent years concerns have arisen because of long latencies often associated with some kernel run-times, sometimes on the order of 100ms or more in systems with monolithic kernels. These latencies often produce noticeable slowness in desktop systems, and can prevent operating systems from performing time-sensitive operations such as audio recording and some communications.

Modern operating systems extend the concepts of application preemption to device drivers and kernel code, so that the operating system has preemptive control over internal run-times as well. Under Windows Vista, the introduction of the Windows Display Driver Model (WDDM) accomplishes this for display drivers, and in Linux, the preemptable kernel model introduced in version 2.6 allows all device drivers and some other parts of kernel code to take advantage of preemptive multi-tasking.

Under Windows prior to Windows Vista and Linux prior to version 2.6 all driver execution was co-operative, meaning that if a driver entered an infinite loop it would freeze the system.

See also

• Computer systems architecture
• Disk operating system
• Kernel (computer science)
• List of important publications in computer science#Operating systems
• Object-oriented operating system
• Orthogonal persistence
• Process management (computing)
• System call
• System image
• Trusted operating system

References

• Auslander, Marc A. (1981). "The evolution of the MVS Operating System". IBM J. Research & Development. {{cite journal}}: Cite has empty unknown parameter: |1= (help); Cite journal requires |journal= (help); Unknown parameter |coauthors= ignored (|author= suggested) (help) http://www.research.ibm.com/journal/rd/255/auslander.pdf
• Deitel, Harvey M. Operating Systems. Pearson/Prentice Hall. ISBN 978-0-13-092641-8. {{cite book}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)
• Bic, Lubomur F. (2003). Operating Systems. Pearson: Prentice Hall. {{cite book}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)
• Stallings (2005). Operating Systems, Internals and Design Principles. Pearson: Prentice Hall.
• Silberschatz, Avi (2008). Operating Systems Concepts. John Wiley & Sons. ISBN 0-470-12872-0. {{cite book}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)

External links

• Template:Dmoz
• Multics History and the history of operating systems
• How Stuff Works - Operating Systems
• Operating Systems Reviews
• DynaOS - Description of a conceptual Distributed Operating System
• How to choose the right operating system
• Operating System Documentation Project
• Google Directory for Operating System