Movable type: Difference between revisions
m Reverted edits by 166.102.136.7 to last version by Alexnia (HG) |
|||
Line 12: | Line 12: | ||
[[Image:Tetradrachm 5th century BC athens detail.jpg|right|thumb|162px|Movable type traces its origins to the punches used to make [[coin]]s: the reverse face of a [[Tetradrachm]] [[Ancient Greek coinage|Greek coin]] from [[Athens]], 5th century BC, featuring letters and the owl symbol of [[Athena]].]] |
[[Image:Tetradrachm 5th century BC athens detail.jpg|right|thumb|162px|Movable type traces its origins to the punches used to make [[coin]]s: the reverse face of a [[Tetradrachm]] [[Ancient Greek coinage|Greek coin]] from [[Athens]], 5th century BC, featuring letters and the owl symbol of [[Athena]].]] |
||
The technique of imprinting multiple copies of [[symbol]]s or [[glyph]]s with a master ''type'' punch made of hard metal first developed in [[mint (coin)|coining]] around [[3000 BC]] in [[Sumer|ancient Sumer]]. Bars or [[ingot]]s of [[precious metal]] were imprinted with a distinctive stamped design; the act of stamping the ingots certified them as currency by the power of the authority symbolized by the type image. These metal punch types can be seen as precursors of the letter punches adapted in later millennia to printing with movable metal type. |
The technique of imprinting multiple copies of [[symbol]]s or [[glyph]]s with a master ''type'' punch made of hard metal first developed in [[mint (coin)|coining]] around [[3000 BC]] in [[Sumer|ancient Sumer]]. Bars or [[ingot]]s of [[precious metal]] were imprinted with a distinctive stamped design; the act of stamping the ingots certified them as currency by the power of the authority symbolized by the type image. These metal punch types can be seen as precursors of the letter punches adapted in later millennia to printing with movable metal type. |
||
hahahahahahahahahahahahahaha kale was here and he fucked your page up!!!! |
|||
By [[650s BC|650 BC]] the ancient Greeks were using larger diameter punches to imprint small page images onto [[coin]]s and [[token coin|tokens]]. [[Cylinder seal]]s were a related form of early typography capable of printing small page designs in relief (''[[cameo]]'') on wax or clay—a miniature forerunner of [[rotogravure|rotogravure printing]] used by wealthy individuals to seal and certify documents. |
By [[650s BC|650 BC]] the ancient Greeks were using larger diameter punches to imprint small page images onto [[coin]]s and [[token coin|tokens]]. [[Cylinder seal]]s were a related form of early typography capable of printing small page designs in relief (''[[cameo]]'') on wax or clay—a miniature forerunner of [[rotogravure|rotogravure printing]] used by wealthy individuals to seal and certify documents. |
Revision as of 16:37, 2 September 2008
Part of a series on the |
History of printing |
---|
![]() |
Movable type is the system of printing and typography using movable components to reproduce the elements of a document (usually individual letters or punctuation). The first known movable type system was invented in China by Bi Sheng out of ceramic between 1041 and 1048 AD. Metal movable type was first invented in Korea during the Goryeo Dynasty (around 1230). Neither movable type system was widely used, probably because of the enormous amount of labour involved in manipulating the thousands of ceramic tablets, or in the case of Korea, metal tablets, required by the use of Chinese characters.
Around 1450, Johannes Gutenberg introduced what is generally regarded as an independent invention of movable type in Europe (see printing press), along with innovations in casting the type based on a matrix and hand mould. Gutenberg was the first to create his type pieces from an alloy of lead, tin and antimony—the same components still used today.[1]
Compared to woodblock printing, movable type pagesetting was quicker and more durable for alphabetic scripts. The metal type pieces were more durable and the lettering was more uniform, leading to typography and fonts. The high quality and relatively low price of the Gutenberg Bible (1455) established the superiority of movable type, and printing presses rapidly spread across Europe, leading up to the Renaissance, and later all around the world. Today, practically all movable type printing ultimately derives from Gutenberg's movable type printing, which is often regarded as the most important invention of the second millennium.[2]
Precursors to movable type
Letterpunch
![](http://upload.wikimedia.org/wikipedia/en/7/7f/Tetradrachm_5th_century_BC_athens_detail.jpg)
The technique of imprinting multiple copies of symbols or glyphs with a master type punch made of hard metal first developed in coining around 3000 BC in ancient Sumer. Bars or ingots of precious metal were imprinted with a distinctive stamped design; the act of stamping the ingots certified them as currency by the power of the authority symbolized by the type image. These metal punch types can be seen as precursors of the letter punches adapted in later millennia to printing with movable metal type.
hahahahahahahahahahahahahaha kale was here and he fucked your page up!!!!
By 650 BC the ancient Greeks were using larger diameter punches to imprint small page images onto coins and tokens. Cylinder seals were a related form of early typography capable of printing small page designs in relief (cameo) on wax or clay—a miniature forerunner of rotogravure printing used by wealthy individuals to seal and certify documents.
The artists who made the first coin punches were in effect the first typographers and type designers. Their designs, including glyphs and words, were stylized with a degree of skill that could not be mistaken for common handiwork—salient and very specific types designed to be reproduced ad infinitum. Unlike the first typefaces used to print books in the 13th century, coin types were neither combined or printed with ink on paper, but "published" in metal—a more durable medium—and survived in substantial numbers. As the portable face of ruling authority, coins were a compact form of standardized knowledge issued in large editions, an early mass medium that stabilized trade and civilization throughout the Mediterranean world of antiquity.
The Phaistos Disc
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/3d/PhaistosDiskLarge.jpg/220px-PhaistosDiskLarge.jpg)
The enigmatic Minoan Phaistos Disc (1800–1600 BC) has been considered by one scholar as an early example of a body of text being reproduced with reusable characters: it may have been produced by pressing pre-formed hieroglyphic "seals" into the soft clay. A few authors even view the disc as technically meeting all definitional criteria to represent an early, if not the earliest incidence of movable type printing.[3][4] Recently it has been alleged by Dr. Jerome Eisenberg that the disk is a forgery.[5]
Metal block printing
A unique type of block printing (tarsh in Arabic) was developed in Arabic Egypt during the 9th-10th centuries: print blocks made from metals such as tin, lead and cast iron, as well as stone, glass and clay. The first printed amulets were also developed there, and were printed with Arabic calligraphy using metal block printing. This technique, however, appears to have had very little influence outside of the Muslim world, since metal and other non-wooden forms of block printing were unknown in China, which later developed metal movable type printing instead. Though Europe adopted woodblock printing from the Muslim world, the technique of metal block printing was also unknown in Europe. Block printing later went out of use in Islamic Central Asia after movable type printing was introduced from China.[6]
History of movable type
Prior to the development of metal movable type, most printing was done using blocks carved from wood. Woodblock printing was used extensively in East Asia, and created the world's first print culture.
Wooden movable type
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/64/Yuan_dynasty_woodblock.jpg/180px-Yuan_dynasty_woodblock.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/16/Chinese_movable_type_1313-ce.png/180px-Chinese_movable_type_1313-ce.png)
Wooden movable type was first developed around 1040 AD by Bi Sheng (990–1051), as described by the Chinese scholar Shen Kuo (1031–1095), but was abandoned in favour of clay moveable types due to uneveness of the moveable wooden type after soaked in ink, also due to the presence of wood grains.[7] In 1298, Wang Zhen, a governmental official of Jingde, Anhui province, China, re-invented a method of making moveable wooden types. He made more than 30,000 wooden movable types and printed 100 copies of Records of Jingde County (旌德县志), a book of more than 60,000 Chinese characters. Soon afterwards, he summarized his invention in his book A method of making moveable wooden types for printing books. Although the wooden type was more durable under the mechanical rigors of handling, repeated printing wore the character faces down, and the types could only be replaced by carving new pieces. This system was later enhanced by pressing wooden blocks into sand and casting metal types from the depression in copper, bronze, iron or tin.[8] The set of wafer-like metal stamp types could be assembled to form pages, inked, and page impressions taken from rubbings on cloth or paper.[8]
A particular difficulty posed the logistical problems of handling the several thousand characters whose command is required for full literacy in Chinese language. In spite of these shortcomings, wooden movable types were used continually in China. Even as late as 1733, a 2300 page volume, 《武英殿聚珍版丛书》, was printed with the system on order of the Yongzheng Emperor.
Ceramic movable type
The first known movable type system for printing was created in China around 1040 AD by Bi Sheng (990–1051).[8] Bi Sheng's type was made of baked clay. As described by the Chinese scholar Shen Kuo (1031–1095):
- When he wished to print, he took an iron frame and set it on the iron plate. In this he placed the types, set close together. When the frame was full, the whole made one solid block of type. He then placed it near the fire to warm it. When the paste [at the back] was slightly melted, he took a smooth board and pressed it over the surface, so that the block of type became as even as a whetstone.
- For each character there were several types, and for certain common characters there were twenty or more types each, in order to be prepared for the repetition of characters on the same page. When the characters were not in use he had them arranged with paper labels, one label for each rhyme-group, and kept them in wooden cases.[9]
- If one were to print only two or three copies, this method would be neither simple nor easy. But for printing hundreds or thousands of copies, it was marvelously quick. As a rule he kept two forms going. While the impression was being made from the one form, the type was being put in place on the other. When the printing of the one form was finished, the other was then ready. In this way the two forms alternated and the printing was done with great rapidity.[10]
In 1193, Zhou Bida, an officer of Southern Song Dynasty, made a set of clay movable type method according to the method described by Shen Kuo in his Dream Pool Essays, and printed his book Notes of The Jade Hall 《玉堂杂记》.[11]
As late as 1844 there were still books printed in China with clay moveable types.[12] However, Bi Sheng's fragile clay types were not practical for large-scale printing.[13]
Metal movable type in Korea
![](http://upload.wikimedia.org/wikipedia/commons/thumb/9/9f/Korean_book-Jikji-Selected_Teachings_of_Buddhist_Sages_and_Seon_Masters-1377.jpg/220px-Korean_book-Jikji-Selected_Teachings_of_Buddhist_Sages_and_Seon_Masters-1377.jpg)
Transition from wood type to metal type occurred ca. 1230 AD during the Goryeo Dynasty of Korea and is credited to Choe Yun-ui. A set of ritual books, Sangjeong Gogeum Yemun were printed with the movable metal type in 1234.[14][15] Examples of this metal type are on display in the Asian Reading Room of the Library of Congress in Washington, D.C.[16] The oldest extant movable metal print book is the Jikji, printed in Korea in 1377.[17]
The techniques for bronze casting, used at the time for making coins (as well as bells and statues) were adapted to making metal type. The following description of the Korean font casting process was recorded by the Joseon dynasty scholar Song Hyon (15th c.):
- At first, one cuts letters in beech wood. One fills a trough level with fine sandy [clay] of the reed-growing seashore. Wood-cut letters are pressed into the sand, then the impressions become negative and form letters [molds]. At this step, placing one trough together with another, one pours the molten bronze down into an opening. The fluid flows in, filling these negative molds, one by one becoming type. Lastly, one scrapes and files off the irregularities, and piles them up to be arranged.[14]
A potential solution to the linguistic and cultural bottleneck that held back movable type in Korea for two hundred years appeared in the early 15th century—a generation before Gutenberg would begin working on his own movable type invention in Europe—when King Sejong devised a simplified alphabet of 24 characters (hangul) for use by the common people, which could have made the typecasting and compositing process more feasible. But Sejong's brilliant creation did not receive the attention it deserved. Adoption of the new alphabet was stifled by the inertia of Korea's cultural elite, who were "...appalled at the idea of losing Chinese, the badge of their elitism."[8]
Proliferation of movable type was also obstructed by a "Confucian prohibition on the commercialization of printing" restricted the distribution of books produced using the new method to the government.[18] The technique was restricted to use by the royal foundry for official state publications only, where the focus was on reprinting Chinese classics lost in 1126 when Korea's libraries and palaces had perished in a conflict between dynasties.[18]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f4/Removeable_type_book.jpg/200px-Removeable_type_book.jpg)
Metal Movable type elsewhere in Asia
During the Mongol Empire (1206–1405), printing using movable type spread from China to Central Asia. The Uyghurs of Central Asia used movable type, their script type adopted from the Mongol language, some with Chinese words printed between the pages, a strong evidence that the books were printed in China.[19]
In the 1298 book Zao Huozi Yinshufa (造活字印书法/造活字印書法) of the Chinese official Wang Zhen, there is mention of tin movable type, but this was largely experimental.[20] It was not until the In Ming Dynasty (1368–1644 AD) that metal movable type was successfully employed, and invented separately from Korea. Successful use of metal movable type in China was first employed by Hua Sui in 1490 AD with his bronze type.[21]
In 1574 the massive 1000 volume encyclopedia Imperial Readings of the Taiping Era 《太平御览》/《太平御覧》 were printed with bronze moveable type.
In1725,the Qing Dynasty government made 250,000 bronze movable type characters and printed 64 sets of the encyclopedic Gujin Tushu Jicheng Complete Collection of Illustrations and Writings from the Earliest to Current Times 《古今图书集成》/《古今圖書集成》. Each set consisted of 5040 volumes, making a total of 322,560 volumes printed using movable type.
Metal movable type in Europe
Johannes Gutenberg of Mainz is acknowledged as the first to invent a metal movable type printing system in Europe. Gutenberg was a goldsmith familiar with techniques of cutting punches for making coins from moulds. Between 1436 and 1450 he developed hardware and techniques for casting letters from matrices using a device called the hand mould.[22] Gutenberg's key invention and contribution to movable type printing in Europe, the hand mould was the first practical means of making cheap copies of letterpunches in the vast quantities needed to print complete books, making the movable type printing process a viable enterprise.
Gutenberg and his associates developed oil-based inks ideally suited to printing with a press on paper, and the first Latin typefaces. His method of casting type may have been different from the hand mould used in subsequent decades. Detailed analysis of the type used in his 42-line Bible has revealed irregularities in some of the characters that cannot be attributed to ink spread or type wear under the pressure of the press. Scholars conjecture that the type pieces may have been cast from a series of matrices made with a series of individual stroke punches, producing many different versions of the same glyph.[23] It has also been suggested that the method used by Gutenberg involved using a single punch to make a mould, but the mould was such that the process of taking the type out disturbed the casting, creating variants and anomalies, and that the punch-matrix system came into use possibly around the 1470s.[24] This raises the possibility that the development of movable type in the West may have been progressive rather than a single innovation.[25]
Gutenberg's movable type printing system spread rapidly across Europe, from the single Mainz press in 1457 to 110 presses by 1480, of which 50 were in Italy. Venice quickly became the center of typographic and printing activity. Significant were the contributions of Nicolas Jenson, Francesco Griffo, Aldus Manutius, and other printers of late 15th-century Europe. Despite some conjectures (see[14]), there is no evidence that movable type from the East ever reached Europe.
Type-founding
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/8b/Long_S-I_Garamond_sort_001.png/180px-Long_S-I_Garamond_sort_001.png)
Type-founding as practiced in Europe and the west consists of three stages.
Punchcutting: If the glyph design includes enclosed spaces (counters), a counterpunch is made. The counter shapes are transferred in relief (cameo) onto the end of a rectangular bar of mild steel using a specialized engraving tool called a graver. The finished counterpunch is hardened by heating and quenching (tempering), or exposure to a cyanide solution (case hardening).
The counterpunch is then struck against the end of a similar rectangular steel bar—the letterpunch—to impress the counter shapes as recessed spaces (intaglio). The outer profile of the glyph is completed by scraping away with a graver the material outside the counter spaces, leaving only the stroke or lines of the glyph. Progress toward the finished design is checked by successive smoke proofs; temporal prints made from a thin coating of carbon deposited on the punch surface by a candle flame. The finished letterpunch is finally hardened to withstand the rigors of reproduction by striking.
One counterpunch and one letterpunch are produced for every letter or glyph making up a complete font.
Matrix: The letterpunch is used to strike a blank die of soft metal to make a negative letter mould, called a matrix.
Casting: The matrix is inserted into the bottom of a device called a hand mould. The mould is clamped shut and molten type metal alloy consisting mostly of lead and tin, with a small amount of antimony for hardening, is poured into a cavity from the top. When the type metal has sufficiently cooled the mould is unlocked and a rectangular block approximately 4 centimeters long, called a sort, extracted. Excess casting on the end of the sort, called the tang, is later removed to make the sort the precise height required for printing, known as "type height", approximately 0.918 inches.
Typesetting
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/ae/Metal_movable_type.jpg/300px-Metal_movable_type.jpg)
Modern, factory-produced moveable type was available in the late 19th century. It was held in the printing shop in a job case, a drawer about 2 inches high, a yard wide, and about two feet deep, with many small compartments for the various letters and ligatures. The most popular and accepted of the job case designs was the California Job Case, which took its name from the Pacific coast location of the foundries that made the case popular.[26]
Regardless of who actually invented the case, in order to make his typesetting more efficient, the inventor arranged the compartments according to the letters' frequency of use. The more frequent letters (t, n, e, i, o, r) are arranged in a rough circle directly in front of the typesetter, while the less-frequently used letters and characters are further away. The arrangement of the letters in the California Job Case became so popular and commonly adopted that a skilled typesetter could "read" the text set by another typesetter, just by watching the positions of the compartments where the typesetter reached for his letters.
ffi | fl | 5m | 4m | ' | k | e | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | $ | £ | K- | Æ | Œ | æ | œ | |||
j | b | c | d | i | s | f | g | ff | 9 | A | B | C | D | E | F | G | ||||||||
? | fi | 0 | H | I | K | L | M | N | O | |||||||||||||||
! | l | m | n | h | o | y | p | w | , | en qd | em qd | |||||||||||||
z | P | Q | R | S | T | V | W | |||||||||||||||||
x | v | u | t | 3-em spaces | a | r | ; | : | quads | |||||||||||||||
q | . | - | X | Y | Z | J | U | & | ffl | |||||||||||||||
The California Job Case |
The California Job Case has three sections, with the rightmost sections containing capital letters in alphabetic order except for the "J" and "U", moved to the lowest line to help avoid confusing them with "I" and "V" respectively. The lower case letters and punctuation marks are in the left and center sections, with the numbers 1 to 8 at the top of the center section, while the ligatures (combined letters, such as "ff", "fi", "æ" etc.) are in various locations about the exterior.
In addition to placing the most commonly used letters in setting text in a given language in the easiest positions for the typeseter to get to, the characters' boxes varied in size depending upon the frequency of usage of the character. Thus for English the "e" box is the largest while the "j", "k", "q", "x", and "z" boxes are the smallest.
Prior to the adoption of the California Job Case, the capital letters were stored in a separate drawer or case that was located above the case that held the other letters; this is why capital letters are called "upper case" characters while the non-capitals are "lower case".
Other large compartments in the California Job Case held spacers, which are blocks of blank type used to separate words and fill out a line of type, such as em and en quads (quadrats, or spaces. A quadrat is a block of type whose face is lower than the printing letters so that it does not itself print.). An em space was the width of a capital letter "M" – as wide as it was high – while an en space referred to a space half the width of its height (usually the dimensions for a capital "N").
Individual letters are assembled into words and lines of text with the aid of a composing stick, and the whole assembly is tightly bound together to make up a page image called a forme, where all letter faces are exactly the same height to form a flat surface of type. The forme is mounted on a printing press, a thin coating of viscous ink is applied and impressions made on paper under great pressure in the press. "Sorts" is the term given to special characters not freely available in the typical type case, such as the "@" mark, etc.
See also
- History of western typography
- Type foundry
- Typesetting
- Odhecaton — the first sheet music printed with movable type
References
- ^ Encyclopaedia Britannica. Retrieved November 27 2006, from Encyclopaedia Britannica Ultimate Reference Suite DVD—entry 'printing'
- ^ In 1997, Time Life magazine picked Gutenberg's invention to be the most important of the second millennium. In 1999, the A&E Network voted Johannes Gutenberg "Man of the Millennium". See also 1,000 Years, 1,000 People: Ranking The Men and Women Who Shaped The Millennium which was composed by four prominent US journalists in 1998.
- ^ Herbert E. Brekle, "Das typographische Prinzip", Gutenberg-Jahrbuch, Vol. 72 (1997), pp.58–63 (60f.)
- ^ C.Michael Hogan, Knossos Fieldnotes, The Modern Antiquarian (2007)
- ^ Alberge, Dalya (2008-07-12). "Phaistos Disc declared as fake by scholar". Times Online. Retrieved 2008-09-01.
- ^ Richard W. Bulliet (1987), "Medieval Arabic Tarsh: A Forgotten Chapter in the History of Printing", Journal of the American Oriental Society 107 (3), p. 427-438.
- ^ Shen Kua: Dream Pool Essay
- ^ a b c d Man, John The Gutenberg Revolution:The story of a genius that changed the world (c) 2002 Headline Book Publishing, a division of Hodder Headline, London. ISBN 0-7472-4504-5. A detailed examination of Gutenberg's life and invention, interwoven with the underlying social and religious upheaval of Medieval Europe on the eve of the Renaissance.
- ^
Tsien, Tsuen-Hsuin (1985). "part one, vol.5". In Joseph Needham, Science and Civilisation in China, (ed.). Paper and Printing. Cambridge: Cambridge University Press.
{{cite book}}
: CS1 maint: extra punctuation (link) CS1 maint: multiple names: editors list (link) - ^ volume 5 part 1 201
- ^ Xu Yinong Moveable Type Books (徐忆农 活字本) ISBN 7806437959
- ^ ibid
- ^ Sohn, Pow-Key, "Early Korean Printing," Journal of the American Oriental Society, Vol. 79, No. 2 (Apr.–Jun., 1959), pp.96–103 (100)
- ^ a b c Thomas Christensen (2007). "Did East Asian Printing Traditions Influence the European Renaissance?". Arts of Asia Magazine (to appear). Retrieved 2006-10-18.
- ^ Sohn, Pow-Key (1993). "Printing Since the 8th Century in Korea". Koreana. 7 (2): 4–9.
{{cite journal}}
: Unknown parameter|month=
ignored (help) - ^ World Treasures of the Library of Congress. Retrieved 26 December 2006.
- ^ Michael Twyman, The British Library Guide to Printing: History and Techniques, London: The British Library, 1998 online
- ^ a b Burke
- ^ Chinese Paper and Printing, A Cultural History, by Tsien, Tsuen-Hsuin
- ^ 近世又铸锡作字,以铁条贯之(rendering:In the modern times, there's melten Tin Movable type, and linked them with iron bar,Zao Huozi Yinshufa(造活字印书法)
- ^ Needham, Volume 5, Part 1, 212.
- ^ Meggs, Philip B. A History of Graphic Design. John Wiley & Sons, Inc. 1998. (pp 58–69) ISBN 0-471-291-98-6
- ^
Agüera y Arcas, Blaise (2002). "Computational analytical bibliography". Proceedings Bibliopolis Conference The future history of the book. The Hague (Netherlands): Koninklijke Bibliotheek.
{{cite conference}}
: Unknown parameter|booktitle=
ignored (|book-title=
suggested) (help); Unknown parameter|coauthors=
ignored (|author=
suggested) (help); Unknown parameter|month=
ignored (help) - ^ "What Did Gutenberg Invent?—Discovery". BBC / Open University. 2006. Retrieved 2006-10-25.
- ^ James L. Adams (1991). Flying Buttresses, Entropy and O-Rings: the World of an Engineer. Harvard University Press.
- ^ http://www.amateurpress.org/bundle/camp194.htm National Amateur Press Association, Monthly Bundle Sample, Campane 194, The California Typecase by Lewis A. Pryor (EDITED)
Literature
- Nesbitt, Alexander The History and Technique of Lettering (c) 1957, Dover Publications, Inc. ISBN 0486402819 , Library of Congress Catalogue Card Number: 57-13116. The Dover edition is an abridged and corrected republication of the work originally published in 1950 by Prentice-Hall, Inc. under the title Lettering: The History and Technique of Lettering as Design.
- The classic manual of hand-press technology is
- Moxon, Joseph (1683–84), Mechanick Exercises on the Whole Art of Printing (ed. Herbert Davies & Harry Carter. New York: Dover Publications, 1962, reprint ed.)
External links