Radio masts and towers
Radio masts and towers are, typically, tall structures designed to support antennas (also known as aerials) for telecommunications and broadcasting, including television. They are among the tallest man-made structures. Similar structures include electricity pylons and towers for wind turbines.
Masts are sometimes named after the broadcasting organisations that use them, or after a nearby city or town.
The Warsaw Radio Mast was the world's tallest supported structure on land, but it collapsed in 1991, leaving the KVLY/KTHI-TV mast as the tallest.
In the case of a mast radiator or radiating tower, the whole mast or tower is itself the transmitting antenna.
Mast or tower?
The terms "mast" and "tower" are often used interchangeably. However, in structural engineering terms, a tower is a self-supporting or cantilevered structure, while a mast is held up by stays or guys. Broadcast engineers in the UK use the same terminology. In US broadcast engineering, a tower is an antenna structure attached to the ground, whereas a mast is a vertical antenna support mounted on some other structure (which itself may be a tower, a building, or a vehicle). Masts (to use the civil engineering terminology) tend to be cheaper to build but require an extended area surrounding them to accommodate the guy wires. Towers are more commonly used in cities where land is in short supply.
There are a few borderline designs that are partly free-standing and partly guyed, called additionally guyed towers. For example:
- The Gerbrandy tower consists of a self-supporting tower with a guyed mast on top.
- The few remaining Blaw-Knox towers do the opposite: they have a guyed lower section surmounted by a freestanding part.
- Zendstation Smilde, a tall tower with a guyed mast on top (guys go to ground)
- Torre de Collserola, a guyed tower with a guyed mast on top (tower portion is not free-standing)
Materials
Steel lattice
The steel lattice is the most widespread form of construction. It provides great strength, low weight and wind resistance, and economy in the use of materials. Lattices of triangular cross-section are most common, and square lattices are also widely used.
When built as a stayed mast, usually the whole mast is parallel-sided. One exception is the Blaw-Knox type.
When built as a tower, the structure may be parallel-sided or taper over part or all of its height. When constructed of several sections which taper exponentially with height, in the manner of the Eiffel Tower, the tower is said to be an Eiffelized one. The Crystal Palace tower in London is an example.
Tubular steel
Guyed masts are sometimes also constructed out of steel tubes. This construction type has the advantage that cables and other components can be protected from weather inside the tube and the structure may look more clean. These masts are mainly used for FM-/TV-broadcasting, but sometimes also as mast radiator. The big mast of Mühlacker transmitting station is a good example of this. A disadvantage of this mast type is that it is much more affected by winds than masts with open bodies. Several tubular guyed masts have collapsed. In the UK, the Emley Moor and Waltham TV stations masts collapsed in the 1960s. In Germany the Bielstein transmitter collapsed in 1985. Tubular masts were not built in all countries. In Germany, France, UK, Czech, Slovakia and the former Soviet Union, many tubular guyed masts were built, while there are nearly none in Poland or North America.
In several cities in Russia and Ukraine several tubular guyed masts with crossbars running from the mast structure to the guys were built in the 1960's. All these masts are exclusively used for FM and TV transmission and, except for the mast in Vinnytsia, are between 150 and 200 metres tall. The crossbars of these masts are equipped with a gangway that holds smaller antennas, though their main purpose is oscillation damping.
Reinforced concrete
Reinforced concrete towers are relatively expensive to build but provide a high degree of mechanical rigidity in strong winds. This can be important when antennas with narrow beamwidths are used, such as those used for microwave point-to-point links, and when the structure is to be occupied by people.
In the 1950s, AT&T built numerous concrete towers, more resembling silos than towers, for its first transcontinental microwave route. Many are still in use today.
In Germany and the Netherlands most towers constructed for point-to-point microwave links are built of reinforced concrete, while in the UK most are lattice towers.
Concrete towers can form prestigious landmarks, such as the CN Tower in Toronto. As well as accommodating technical staff, these buildings may have public areas such as observation decks or restaurants.
The Stuttgart TV tower was the first tower in the world to be built in reinforced concrete. It was designed in 1956 by the local civil engineer Fritz Leonhardt.
Fibreglass
Fibreglass poles are occasionally used for low-power non-directional beacons or medium-wave broadcast transmitters.
Wood
There are fewer wooden towers now than in the past. Many were built in the UK during World War II because of a shortage of steel. In Germany before World War II wooden towers were used at nearly all medium-wave transmission sites, but all of these towers have since been demolished, except for the Gliwice Radio Tower.
Ferryside Relay is an example of a TV relay transmitter using a wooden pole.
Other types of antenna supports and structures
Poles
Shorter masts may consist of a self-supporting or guyed wooden pole, similar to a telegraph pole. Sometimes self-supporting tubular galvanized steel poles are used: these may be termed monopoles.
Buildings
In some cases, it is possible to install transmitting antennas on the roofs of tall buildings. In North America, for instance, there are transmitting antennas on the Empire State Building, the Willis Tower ,and formerly on the World Trade Center towers. When the buildings collapsed, several local TV and radio stations were knocked off the air until backup transmitters could be put into service.[1] Such facilities also exist in Europe, particularly for portable radio services and low-power FM radio stations. In London, the BBC erected in 1936 a mast for broadcasting early television on one of the towers of a Victorian building, the Alexandra Palace. It is still in use.
Disguised cell-sites
Many people view bare cellphone towers as ugly and an intrusion into their neighbourhoods. Even though people increasingly depend upon cellular communications, they are opposed to the bare towers spoiling otherwise scenic views. Many companies offer to 'hide' cellphone towers in, or as, trees, church towers, flag poles, water tanks and other features.[2] There are many providers that offer these services as part of the normal tower installation and maintenance service. These are generally called "stealth towers" or "stealth installations" or "Concealed cell sites".
The level of detail and realism achieved by disguised cellphone towers is remarkably high; for example, such towers disguised as trees are nearly indistinguishable from the real thing, even for local wildlife (who additionally benefit from the artificial flora).[3] Such towers can be placed unobtrusively in national parks and other such protected places, such as towers disguised as cacti in Coronado National Forest.[4]
Even when disguised, however, such towers can create controversy; a tower doubling as a flagpole attracted controversy in 2004 in relation to the U.S. Presidential campaign of that year, and highlighted the sentiment that such disguises serve more to allow the installation of such towers in subterfuge away from public scrutiny rather than to serve towards the beautification of the landscape.[original research?][5]
The disguises, anyway, are more gentle on the landscape and a disguided cell site can be easily introduced into environments that require a low-impact visual outcome. Some of these disguises are made to look like some kind of trees (i.e. palm trees, pine trees, cypress..) or some rooftops structures or urban fornitures such as chimneys or panels. Here's a list of some disguises.
Pine Antenna Camouflage
The Austrian Pine cell tower is a kind of antenna is suited to be placed in an enviroment that is like the one on the Alps, in the Austrian region. It is designed in order to have a really low impact visual impact in between the trees of the kind European Black Pine.
The Maritime Pine Cell Tower is a kind of antenna that can be placed in a region where there are lots of Maritime Pines, and it has low impact on the visual landscape.
Palm Antenna Camouflage
The Date Palm Cell Tower is an antenna that can be placed in any enviroment that has those kind of trees (type Phoenix dactylifera) in it, and it has really low visual impact. The Coconut Palm Cell Tower is an antenna that resembles this kind of tree(type Cocos nucifera)and has really low visual impact. The Fan Palm Cell Tower is an antenna that is made to look like the type Chamaerops humilis and has really low visual impact.
Cypress Antenna Camouflage
The Cypress Cell Tower is a kind of antenna that resembles a Cypress member of the family Cupressaceae; it is suited to have really low visual impact in an area where this kind of tree is present.
Concealment Chimneys
In order to reduce enviromental impact in urban areas, there can be found a wide range of low environmental impact products, such as artificial chimneys, structures having variable heights from 6 to 12 meters, used to conceal one or more mobile telephone operators on the same station. The metallic structural part is formed by a steel pole divided into shafts, according to the total height of the structure. The frame dimensions vary according to that of the chimney and place of installation. The locking system allows to gain access inside of the chimney at various heights to facilitate maintenance operations. The hinges, to open the cladding panels, are of electromagnetic transparent materials. The standard chimney terminal is flat-shaped, but can also be supplied in different shapes, colour and size upon request. The materials used for the chimney terminals and concealment are of special plastics, free from metallic impurities and suitable to resist wind loads of over 160 Km/h and operating temperature ranges from – 40 and + 110 C°. It is possible to supply innumerable colours, with external surfaces similar to bricks, natural stone, etc
Concealment Paneling
The consistent number of roof tops antennas that crowd our cities often, from an environmental impact point of view, do not respect the areas in which they have been installed. There are roofmask panels that can be easily fixed to existing rooftop structures, giving them total restyling in reduced times and with contained costs. The materials used range from special cloth sheets, to fiberglass, to plastic and microperforated materials, with an infinite range of colours and reproducible images on the external surfaces.
Architecturally Concealed Sites
These kind of stuructures are an innovative answer to the problem of environmental impact of antenna supporting structures on buildings. Whichever type of technological infrastructure can, in fact, be harmoniously introduced into the urban network that surrounds it and even becoming a furnishing component. There are several models that can be found, spacing from an architectural structure that minimizes the visual impact in urban areas, to a telecommunications pole with a LCD display for advertising, weather forecasts, traffic information. On the other hand, the structure can acquire a greater visibility, instead of being unnoticed, transforming it into a true and proper piece of urban furniture; an exemple of such an object is the Mosaictower, an exemple of steel Telestyle structure completely covered by glass panels, each of which having Murano glass mosaic tile inserts, forming a true and proper ocean blue and green mosaic.
Telestyle
Telestyles are structures that can be considered urban forniture. These kind of elements can minimize the architectural and visual impact of cell sites, with a good design, new technologies and fuctionality. Telestyles don't disguise cell sites, but the make them a part of the urban landscape. In fact, these structures work as cell cites, but they also work as street lights, territory monitoring (security cameras, speed sensors/cameras for vehicles, etc.), environmental detecting (pollution measurement) and communication display (advertising, weather forecasts, traffic information, etc.). These kind of concealmets are the result of a great teamwork of several architects and design experts that brought to a new kind of architecturally blended cell towers.
Mast radiators
A mast radiator is a radio tower or mast in which the whole structure works as an antenna. It is used frequently as a transmitting antenna for long or medium wave broadcasting.
Structurally, the only difference is that a mast radiator may be supported on an insulator at its base. In the case of a tower, there will be one insulator supporting each leg.
Telescopic, pump-up and tiltover towers
A special form of the radio tower is the telescopic mast. These can be erected very quickly. Telescopic masts are used predominantly in setting up temporary radio links for reporting on major news events, and for temporary communications in emergencies. They are also used in tactical military networks. They can save money by needing to withstand high winds only when raised, and as such are widely used in amateur radio.
Telescopic masts consist of two or more concentric sections and come in two principal types:
- Pump-up masts are often used on vehicles, and are raised to their full height pneumatically or hydraulically. They are usually only strong enough to support fairly small antennas.
- Telescopic lattice masts are raised by means of a winch, which may be powered by hand or an electric motor. These tend to cater for greater heights and loads than the pump-up type. When retracted, the whole assembly can sometimes be lowered to a horizontal position by means of a second tiltover winch. This enables antennas to be fitted and adjusted at ground level before winching the mast up.
Balloons and kites
A tethered balloon or a kite can serve as a temporary support. It can carry an antenna or a wire (for VLF, LW or MW) up to an appropriate height. Such an arrangement is used occasionally by military agencies or radio amateurs. The American broadcasters TV Martí broadcast a television program to Cuba by means of such a balloon.
Other special structures
For two VLF transmitters wire antennas spun across deep valleys are used. The wires are supported by small masts or towers or rock anchors. See List of spans: Antenna spans across valleys. The same technique was also used at Criggion radio station.
For ELF transmitters ground dipole antennas are used. Such structures require no tall masts. They consist of two electrodes buried deep in the ground at least a few dozen kilometres apart. From the transmitter building to the electrodes, overhead feeder lines run. These lines look like power lines of the 10 kV level, and are installed on similar pylons.
Design features
Economic and aesthetic considerations
- The cost of a mast or tower is roughly proportional to the square of its height.[citation needed]
- A guyed mast is cheaper to build than a self-supporting tower of equal height.
- A guyed mast needs additional land to accommodate the guys, and is thus best suited to rural locations where land is relatively cheap. An unguyed tower will fit into a much smaller plot.
- A steel lattice tower is cheaper to build than a concrete tower of equal height.
- Two small towers may be less intrusive, visually, than one big one, especially if they look identical.
- Towers look less ugly if they and the antennas mounted on them appear symmetrical.
- Concrete towers can be built with aesthetic design - and they are, especially in Continental Europe. They are sometimes built in prominent places and include observation decks or restaurants.
Masts for HF/shortwave antennas
For transmissions in the shortwave range, there is little to be gained by raising the antenna more than a few wavelengths above ground level. Shortwave transmitters rarely use masts taller than about 100 metres.
Access for riggers
Because masts, towers and the antennas mounted on them require maintenance, access to the whole of the structure is necessary. Small structures are typically accessed with a ladder. Larger structures, which tend to require more frequent maintenance, may have stairs and sometimes a lift, also called a service elevator.
Aircraft warning features
Tall structures in excess of certain legislated heights are often equipped with aircraft warning lamps, usually red, to warn pilots of the structure's existence. In the past, ruggedized and under-run filament lamps were used to maximize the bulb life. Alternatively, neon lamps were used. Nowadays such lamps tend to use LED arrays.
Height requirements vary across states and countries, and may include additional rules such as requiring a white flashing strobe in the daytime and pulsating red fixtures at night. Structures over a certain height may also be required to be painted with contrasting color schemes such as white and orange or white and red to make them more visible against the sky.
Light pollution and nuisance lighting
In some countries where light pollution is a concern, tower heights may be restricted so as to reduce or eliminate the need for aircraft warning lights. For example in the United States the 1996 Telecommunications Act allows local jurisdictions to set maximum heights for towers, such as limiting tower height to below 200 feet and therefore not requiring aircraft illumination under U.S. Federal Communications Commission (FCC) rules. The limit is more commonly set to 190 or 180 feet to allow for masts extending above the tower.
Wind-induced oscillations
One problem with radio masts is the danger of wind-induced oscillations. This is particularly a concern with steel tube construction. One can reduce this by building cylindrical shock-mounts into the construction. One finds such shock-mounts, which look like cylinders thicker than the mast, for example, at the radio masts of DHO38 in Saterland. There are also constructions, which consist of a free-standing tower (usually from reinforced concrete), onto which a guyed radio mast is installed. The best known such construction is the Gerbrandy Tower in Lopik (the Netherlands). Further towers of this building method can be found near Smilde (the Netherlands) and Fernsehturm, Waldenburg, Baden-Württemberg, Germany).
Hazard to birds
Radio, television and cell towers have been documented to pose a hazard to birds. Reports have been issued documenting known bird fatalities and calling for research to find ways to minimize the hazard that communications towers can pose to birds.[6][7]
Catastrophic collapses
Law
Since June 2010, Telecom operators in the USA can erect new telecom masts or towers as the government has lifted the moratorium, which was earlier placed on the issuance of permits for the construction of telecommunication towers.[8]
See also
- Antenna (radio)
- Lattice tower (also lists radio towers built of wood)
- Mast radiator
- Targeting Towers
- Telecom Infrastructure Sharing
- Tower array
- Transmitter station
- Concealed cell sites
- Cell site
- Mobile cell sites
- Cell on wheels
- Base transceiver station
References
- ^ Some New York City TV and Radio Stations Off The Air After World Trade Center Collapse
- ^ CARC - UNC-Charlotte - Class 1000 Clean Room Facilities
- ^ Cell Phone Trees
- ^ Today
- ^ "Stealth towers".
- ^ Shire, Gavin G. (June 2000). "Communication Towers: A Deadly Hazard to Birds" (PDF). American Bird Conservancy. Earthjustice. Retrieved 2010-09-29.
{{cite web}}: Unknown parameter|coauthors=ignored (|author=suggested) (help) - ^ "Avian Collisions at Communication Towers - Sources of Information". U.S. Fish and Wildlife Service. June 1, 2009. Retrieved 2010-08-13.
- ^ "?".
Additional reading
- Sreevidya, S., and Subramanian, N., Aesthetic Appraisal to Antenna Towers, Journal of Architectural Engineering, American Society of Civil Engineers, Vol. 9, No. 3, September 2003, pp. 102–108
External links
- All US Towers over 200 feet, transmitting on certain frequencies, or have certain transmitters over a certain power, must be registered in the US. This is the online directory.
- The Transmission Gallery: Broadcast Transmission Sites in the UK
- The Transmission Gallery: Constructing Stayed Masts
- Scott Fybush, international tower photographer who has documented thousands of towers in his travels
- Tom Bosscher of Western Michigan's website on towers of Michigan
- Mike Fitzpatrick's NECRAT.COM tower based website contains tower pictures from New England, New York, and beyond.
- Turkish towers (in Turkish)
- Amateur Radio Tower construction project
- Displays over 12,000 80+ meter tall towers used in wind resource assessment
- French towers (in French)
- The Legal Landscape When a Tower Collapses
- Richard Moore's Anorak Zone Photo Gallery of UK TV and Radio transmission sites
- Mobile Phone Masts & Radio Base Station Planning UK
- Various Communication Masts &Towers in Atlanta GA. (U.S.)
- UK masts and towers at thebigtower.com
- Searchable map of all registered transmitters in Australia