|This article needs additional citations for verification. (July 2015)|
Bi-directional text is text containing text in both text directionalities, both right-to-left (RTL or dextrosinistral) and left-to-right (LTR or sinistrodextral). It generally involves text containing different types of alphabets, but may also refer to boustrophedon, which is changing text directionality in each row.
Some writing systems of the world, notably the Arabic and Hebrew scripts, and derived systems such as the Persian, Urdu, and Yiddish scripts, are written in a form known as right-to-left (RTL), in which writing begins at the right-hand side of a page and concludes at the left-hand side. This is different from the left-to-right (LTR) direction used by most languages in the world. When LTR text is mixed with RTL in the same paragraph, each type of text is written in its own direction, which is known as bi-directional text. This can get rather complex when multiple levels of quotation are used.
Many computer programs fail to display bi-directional text correctly. For example, the Hebrew name Sarah (שרה) is spelled: sin (ש) (which appears rightmost), then resh (ר), and finally heh (ה) (which should appear leftmost). (הרש)
Note: Some web browsers may display the Hebrew text in this article in the opposite direction.
- 1 Bidirectional script support
- 2 Unicode bidi support
- 3 Scripts using bi-directional text
- 4 See also
- 5 References
- 6 External links
Bidirectional script support
Bidirectional script support is the capability of a computer system to correctly display bi-directional text. The term is often shortened to "BiDi" or "bidi".
Early computer installations were designed only to support a single writing system, typically for left-to-right scripts based on the Latin alphabet only. Adding new character sets and character encodings enabled a number of other left-to-right scripts to be supported, but did not easily support right-to-left scripts such as Arabic or Hebrew, and mixing the two was not practical. Right-to-left scripts were introduced through encodings like ISO/IEC 8859-6 and ISO/IEC 8859-8, storing the letters (usually) in writing and reading order. It is possible to simply flip the left-to-right display order to a right-to-left display order, but doing this sacrifices the ability to correctly display left-to-right scripts. With bidirectional script support, it is possible to mix scripts from different scripts on the same page, regardless of writing direction.
In particular, the Unicode standard provides foundations for complete BiDi support, with detailed rules as to how mixtures of left-to-right and right-to-left scripts are to be encoded and displayed.
Unicode bidi support
 The Unicode standard calls for characters to be ordered 'logically', i.e. in the sequence they are intended to be interpreted, as opposed to 'visually', the sequence they appear. This distinction is relevant for bidi support because at any bidi transition, the visual presentation ceases to be the 'logical' one. Thus, in order to offer bidi support, Unicode prescribes an algorithm for how to convert the logical sequence of characters into the correct visual presentation. For this purpose, the Unicode encoding standard divides all its characters into one of four types: 'strong', 'weak', 'neutral', and 'explicit formatting'.
Strong characters are those with definite directionality. Examples of this type of character include most alphabetic characters, syllabic characters, Han ideographs, non-European or non-Arabic digits, and punctuation characters that are specific to only those scripts.
Weak characters are those with vague directionality. Examples of this type of character include European digits, Eastern Arabic-Indic digits, arithmetic symbols, and currency symbols. Punctuation symbols that are common to many scripts, such as the colon, comma, full-stop, and the no-break-space also fall within this category.
 Unless a directional override is present numbers are always encoded (and entered) big-endian, and the numerals rendered LTR. The weak directionality only applies to the placement of the number in its entirety.
Neutral characters have directionality indeterminable without context. Examples include paragraph separators, tabs, and most other whitespace characters.
Explicit formatting characters, also referred to as "directional formatting characters", are special Unicode sequences that direct the unicode algorithm to modify its default behavior. These characters are subdivided into "marks", "embeddings", "isolates", and "overrides". Their effects continue until the occurrence of either a paragraph separator, or a "pop" character.
If a "weak" character is followed by another "weak" character, the algorithm will look at the first neighbouring "strong" character. Sometimes this leads to unintentional display errors. These errors are corrected or prevented with "pseudo-strong" characters. Such Unicode control characters are called marks. The mark (U+200E left-to-right mark (HTML
‎ · LRM) or U+200F right-to-left mark (HTML
‏ · RLM)) is to be inserted into a location to make an enclosed weak character inherit its writing direction.
For example, to correctly display the U+2122 ™ trade mark sign for an English name brand (LTR) in an Arabic (RTL) passage, an LRM mark is inserted after the trademark symbol if the symbol is not followed by LTR text. If the LRM mark is not added, the weak character ™ will be neighbored by a strong LTR character and a strong RTL character. Hence, in an RTL context, it will be considered to be RTL, and displayed in an incorrect order.
The "embedding" directional formatting characters are the classical Unicode method of explicit formatting, and as of Unicode 6.3, are being discouraged in favor of "isolates". An "embedding" signals that a piece of text is to be treated as directionally distinct. The text within the scope of the embedding formatting characters is not independent of the surrounding text. Also, Characters within an embedding can affect the ordering of characters outside. Unicode 6.3 recognized that directional embeddings usually have too strong an effect on their surroundings and are thus unnecessarily difficult to use.
The "isolate" directional formatting characters signal that a piece of text is to be treated as directionally isolated from its surroundings. As of Unicode 6.3, these are the formatting characters that are being encouraged in new documents – once target platforms are known to support them. These formatting characters were introduced after it became apparent that directional embeddings usually have too strong an effect on their surroundings and are thus unnecessarily difficult to use. Unlike the legacy 'embedding' directional formatting characters, 'isolate' characters have no effect on the ordering of the text outside their scope. Isolates can be nested, and may be placed within embeddings and overrides.
The "override" directional formatting characters allow for special cases, such as for part numbers (e.g. to force a part number made of mixed English, digits and Hebrew letters to be written from right to left), and are recommended avoided wherever possible. As is true of the other directional formatting characters, "overrides" can be nested one inside another, and in embeddings and isolates.
The "pop" directional formatting characters terminate the scope of the most recent "embedding", "override", or "isolate".
In the algorithm, each sequence of concatenated strong characters is called a "run". A "weak" character that is located between two "strong" characters with the same orientation will inherit their orientation. A "weak" character that is located between two "strong" characters with a different writing direction, will inherit the main context's writing direction (in an LTR document the character will become LTR, in an RTL document, it will become RTL).
Table of possible BiDi-types
|Bidirectional character type (Unicode character property Bidi_Class)|
effect, or Explicit
|Directionality||General scope||Bidi_Control character|
|L||Left-to-Right||Strong||L-to-R||Most alphabetic and syllabic characters, Han ideographs, non-European or non-Arabic digits, LRM character, ...||U+200E left-to-right mark (HTML
|R||Right-to-Left||Strong||R-to-L||Hebrew alphabet and related punctuation, RLM character||U+200F right-to-left mark (HTML
|AL||Right-to-Left Arabic||Strong||R-to-L||Arabic, Thaana and Syriac alphabets, and most punctuation specific to those scripts||U+061C arabic letter mark (HTML
|EN||European Number||Weak||European digits, Eastern Arabic-Indic digits, ...|
|ES||European Separator||Weak||plus sign, minus sign, ...|
|ET||European Number Terminator||Weak||degree sign, currency symbols, ...|
|AN||Arabic Number||Weak||Arabic-Indic digits, Arabic decimal and thousands separators, ...|
|CS||Common Number Separator||Weak||colon, comma, full stop, no-break space, ...|
|NSM||Nonspacing Mark||Weak||Characters in General Categories Mark, nonspacing and Mark, enclosing (Mn, Me)|
|BN||Boundary Neutral||Weak||Default ignorables, non-characters, control characters other than those explicitly given other types|
|B||Paragraph Separator||Neutral||paragraph separator, appropriate Newline Functions, higher-level protocol paragraph determination|
|WS||Whitespace||Neutral||space, figure space, line separator, form feed, General Punctuation block spaces||This set is smaller than Unicode whitespace list|
|ON||Other Neutrals||Neutral||All other characters, including object replacement character|
|LRE||Left-to-Right Embedding||Explicit||L-to-R||LRE character only||U+202A left-to-right embedding (HTML
|LRO||Left-to-Right Override||Explicit||L-to-R||LRO character only||U+202D left-to-right override (HTML
|RLE||Right-to-Left Embedding||Explicit||R-to-L||RLE character only||U+202B right-to-left embedding (HTML
|RLO||Right-to-Left Override||Explicit||R-to-L||RLO character only||U+202E right-to-left override (HTML
|Pop Directional Format||Explicit||PDF character only||U+202C pop directional formatting (HTML
|LRI||Left-to-Right Isolate||Explicit||L-to-R||LRI character only||U+2066 left-to-right isolate (HTML
|RLI||Right-to-Left Isolate||Explicit||R-to-L||RLI character only||U+2067 right-to-left isolate (HTML
|FSI||First Strong Isolate||Explicit||FSI character only||U+2068 first strong isolate (HTML
|PDI||Pop Directional Isolate||Explicit||PDI character only||U+2069 pop directional isolate (HTML
Scripts using bi-directional text
Chinese characters can be written in either direction as well as vertically (top to bottom then right to left), especially in signs (such as plaques), but the orientation of the individual characters is never changed. This can often be seen on tour buses in China, where the company name customarily runs from the front of the vehicle to its rear — that is, from right to left on the right side of the bus, and from left to right on the left side of the bus. English texts on the right side of the vehicle are also quite commonly written in reverse order. (See pictures of tour bus and post vehicle below.)
On the right side of this Hainan Airlines aircraft, the text runs from right to left ( 空 航 南 海 ).
Boustrophedon is a writing style found in ancient Greek inscriptions and in Hungarian runes. This method of writing alternates direction, and usually reverses the individual characters, on each successive line.
- Internationalization and localization
- Horizontal and vertical writing in East Asian scripts
- Writing system#Directionality (section on directionality)
- Combining Cyrillic Millions
- Transformation of text
|This article needs additional citations for verification. (July 2015)|
- Unicode Standards Annex #9 The Bidirectional Algorithm
- W3C guidelines on authoring techniques for bi-directional text - includes examples and good explanations
- GNU FriBidi A free implementation of the Unicode bidirectional algorithm
- ICU International Components for Unicode contains an implementation of the bidirectional algorithm — along with other internationalization services
- UCData: "Pretty Good Bidi Algorithm Library" A small and fast bidirectional reordering algorithm that works pretty good, but not necessarily compliant to the Unicode algorithm
- Bidirectional Scripts in Desktop Software Working group for supporting BiDi in Free Software. Contains several links to readings and implementation regarding BiDi in computer systems.
- Another Wiki about BiDi
- Bidirectional text - Examples and practical advice
- .Net BiDi Implementation
- A freely available rather final version of Israeli standard 5194 - bidirectional text editing
- Consequences of BiDi in Quran pages ~~
- Work in progress on new version of Bidi editing standard + reference implementation
- Series of articles about pitfalls of BiDi programming