Pratt & Whitney PW1000G
|National origin||United States|
|Manufacturer||Pratt & Whitney|
|Major applications||Airbus A220 |
Airbus A320neo family
Embraer E-Jets E2
|Program cost||$10 billion|
|Unit cost||$12 million|
The Pratt & Whitney PW1000G is a high-bypass geared turbofan engine family, currently selected as the exclusive engine for the Airbus A220, Mitsubishi SpaceJet, and Embraer's second generation E-Jets, and as an option on the Irkut MC-21 and Airbus A320neo. The project was previously known as the Geared Turbofan (GTF), and originally the Advanced Technology Fan Integrator (ATFI). The engine is expected to deliver reductions in fuel use and ground noise when used in next-generation aircraft. The PW1000G engine first entered commercial use in January 2016 with Lufthansa's first commercial Airbus A320neo flight.
- 1 Development
- 2 Design
- 3 Operational history
- 4 Applications
- 5 Specifications
- 6 See also
- 7 Notes
- 8 References
- 9 External links
In Summer 1993 Pratt & Whitney started to test its 53,000 lbf (240 kN) ADP demonstrator at the NASA Ames wind tunnel with a 4:1, 40,000 hp (30,000 kW) gearbox. Its 118.2 in (300 cm) fan with 18 reversing pitch composite blades had a 15:1 bypass ratio. It was to cut fuel consumption by 6–7%, emissions by 15% and generate less noise due to lower fan tip speed of 950 ft/s (290 m/s) down from 1,400 ft/s (430 m/s) in conventional 5:1 bypass turbofans. Limited by weight and drag, this was mitigated by using 40% composites by weight up from 15% otherwise. Pratt was planning to run in 1994 a flight weight 60,000 hp (45,000 kW) gearbox for 75,000 lbf (330 kN) of thrust.
P&W first attempted to build a geared turbofan starting around 1998, with the PW8000,, targeted for the 25,000–35,000 lbf (110–160 kN) range. This essentially was an upgrade of the existing PW6000 that replaced the fan section with a gearing system and new single-stage fan, and aimed for 8–10% lower operating costs, or $600,000 per aircraft annually.
It had an 11:1 bypass ratio (twice the V2500), a 40:1 overall pressure ratio, and 13 stages instead of 22 in the V2500 for similar thrusts. Preliminary development was to end by June 1, the first test for 10 months later and certification 20 months after for $400 million. Pratt had tested gearboxes for 950 hours for $350 million in the previous decade and aimed for 99.5% efficiency. The ADP gearbox was 30% more powerful and the reversing pitch fan was not retained for the PW8000. Pratt was to control 60% of the program, shared with IAE partners MTU and FiatAvio but not Rolls-Royce, but possibly Volvo and MHI.
Its LP turbine ran at 9,160 rpm, reduced by 3:1 for a 3,250 rpm fan having a 1,050 ft/s (320 m/s) blade tip speed down from 1,400 ft/s (430 m/s), dropping noise to 30 EPNdB cumulated below Stage 3 requirements. The 76–79 in (190–200 cm) fan had 20 titanium blades, and moved 1,369 lb (621 kg) of air per second in climb. The conventional 3-stage LP compressor was followed by a 5-stage, 12:1 HP compressor fitted with 700 blades inspired by the military ATEGG program's low aspect-ratio airfoils. A floatwall/TALON combustor was followed by a single stage HP turbine and a counter rotating 3-stage LP turbine with 400 blades, both CFD optimized. The gearbox could handle 50 hp/lb (82 kW/kg). Eight engines would have been used for certification.
After several years of development the PW8000 essentially disappeared.
Soon afterwards the ATFI project appeared, using a PW308 core but with a new gearbox and a single-stage fan. It had its first run on March 16, 2001. This led to the Geared Turbofan (GTF) program, which was based around a newly designed core jointly developed with German MTU Aero Engines.
In addition to the geared turbofan, the initial designs included a variable-area fan nozzle (VAFN), which allows improvements in propulsive efficiency across a range of the flight envelope. However, the VAFN has since been dropped from production designs due to high system weight.
In July 2008, the GTF was renamed PW1000G, the first in a new line of "PurePower" engines. Pratt & Whitney claims the PW1000G is 16% more fuel efficient than current engines used on regional jets and single-aisle jets, as well as being up to 75% quieter.
The engine was first tested on the Pratt & Whitney Boeing 747SP, then since October 14, 2008 on an Airbus A340-600 in Toulouse on the number two pylon. Testing of the CSeries bound PW1524G model began in October 2010. The PW1500G engine successfully achieved Transport Canada type certification on February 20, 2013. The A320 engine, the PW1100G, had made its first static engine test run on 1 November 2012,  and was first tested on the 747SP on 15 May 2013.
The first flight test on one of its intended production airframes, the Bombardier CSeries (Airbus A220), was on September 16, 2013. The first flight of the Airbus A320neo followed on September 25, 2014. The PW1100G engine successfully achieved FAA type certification on December 19, 2014. The fourth variant of the engine, the PW1900G, first flew on November 3, 2015 from Mirabel in Canada fitted to the Boeing 747SP test aircraft.
At the start of its production in 2016, each GTF was costing PW $10m to build, more than the sale price, but should become less than $2m per engine. MTU provides the first four stages of the high-pressure compressor, the low-pressure turbine and other components. In October 2016, MTU started to deliver the engine assembled on its line to Airbus.
In November 2016, Pratt had fixed the issue of engine start time and wanted to deliver 150 powerplants by the year-end, 50 fewer than originally planned. This was because of low yield of fan blades when less than one-third were passing inspection at the start of the year compared to 75% success for the latest. 350–400 engine deliveries were targeted for 2017. Fuel-burn performance was 16% better than the IAE V2500 baseline, on target, and even 18% better in best cases.
The troubled introduction made customers choose the CFM LEAP which won 396 plane orders compared to 39 from January through early August 2017 to power the A320neo: 46% of the GTF-powered A320neos were out of service for at least one week in July 2017 compared with just 9% of those using the LEAP, while its market share fell from 45% to 40% in 2016 but 1,523 planes (29%) were still undecided and Pratt have an 8,000 engine orderbook including 1,000 non-Airbus planes.
On 24 October 2017, a 99.8% dispatch reliability was attained and Pratt remained on track to deliver 350 to 400 engines in 2017, as 254 have been delivered including 120 in the third quarter, but 12–15% were diverted for spares as the carbon air seal and combustor liners were wearing out quickly, requiring engine removals to change the part. P&W expects to deliver over 2,500 GTFs from 2018 to 2020, more than 10,000 engines by 2025.
After 15 PW1200Gs for the Mitsubishi MRJ development were built in Mirabel and Middletown, Mitsubishi Heavy Industries started final assembly in Nagoya in mid 2018 for the MRJ 2020 introduction. Icing, thermal environment, stall, drainage, performance, operability and other development tests were completed. MHI manufactures the combustor and high-pressure turbine disks.
Ultra high-bypass version
In 2010, Pratt & Whitney launched the development of an ultra high-bypass version, with a ratio significantly higher than the PW1100G's 12.2:1 for the A320neo, to improve fuel consumption by 20% compared to a CFM56-7 and reduce noise relative to the FAA's Stage 4 by 25 dB. In 2012, wind tunnel tests were completed on an earlier version of the fan and in 2015, 275h of testing were completed on a fan rig. More than 175h of ground testing of key components were completed in October 2017, on a shorter duct inlet, a part of the nacelle and a fan with lower-pressure ratio blades, significantly fewer than the 20 blades of the PW1100G. The US FAA Continuous Lower Energy, Emissions and Noise (CLEEN) program sponsors the tests, with its technologies to be validated in a flight test campaign. It could power the Boeing New Midsize Airplane in the mid-2020s and Airbus' response, and would compete against the Rolls-Royce UltraFan and a CFM LEAP higher-thrust version.
By putting a 3:1 gearbox between the fan and the low-pressure spool, each spins at its optimal speed: 4,000–5,000 RPM for the fan and 12,000–15,000 RPM for the spool, the high-pressure spool spinning at more than 20,000 RPM. The 30,000 hp gearbox is designed as a lifetime item with no scheduled maintenance other than changing oil. The A320 PW1100G fan has 20 blades, down from 36 in the CFM56-5B.
As the higher bypass ratio and gear leverage a higher propulsive efficiency, there is less need for a high performance engine core than the CFM LEAP, leaving a larger fuel burn gain margin of 5–7% over the next decade, averaging 1% per year combined with gear ratio tweaks. It has up to 25,000 cycles LLPs, 25% better than others at 20,000 cycles, reducing maintenance costs, and the fan gear has no limit.
The first delivery to a commercial operator, an A320neo to Lufthansa, occurred on January 20, 2016. As of early August 2017, Pratt was supporting 75 aircraft: 59 Airbus A320neos with PW1100Gs and 16 Airbus A220s with PW1500Gs. In January 2018, it reached 500,000 flight hours on a fleet of 135 aircraft flown by 21 operators. Due to teething problems, overall losses on the GTF program rose to $1.2 billion.
In May 2018, after receiving and operating five A320neos, Spirit Airlines confirms a fuel burn reduction better than the 15% promised, perhaps by 1%–2%. Air Lease Corporation's A320neos deliveries are 11 months late but its executive chairman Steven Udvar-Hazy believes 12–18 months will be needed to get back to normal.
The first delivery was to Lufthansa instead of Qatar Airways due to rotor bow, or thermal bowing, due to asymmetrical cooling after shut-down on the previous flight. Differences in temperature across the shaft section supporting the rotor lead to different thermal deformation of the shaft material, causing the rotor axis to bend; this results in an offset between the center of gravity of the bowed rotor and the bearing axis, causing a slight imbalance and potentially reducing the tight clearance between the rotor blade tips and the compressor wall. All production standard engines now feature a damper on the third and fourth shaft bearings to help stiffen the shaft and data from engines in service and under accelerated testing is expected to gradually reduce engine start times. According to P&W President Bob Leduc, "by the time we get to June (2016), it will be down to 200 seconds for start time and by the time we get to December (2016) we will be down to 150 seconds for start time".
In an earnings briefing on 26 July the CEO of Pratt & Whitney's parent company United Technologies Gregory Hayes stated when asked about the start up issues on the PW1100G-JM; "On the technical stuff, I would tell you it is in the rearview mirror. The start time with the software drops have been pretty well addressed". Airbus group chief Tom Enders said while releasing Airbus's 2016 first half financial results that the first upgraded "golden engine" would be delivered to Lufthansa in early August 2016.
Initially, the PW1000G start up sequence took about seven minutes, compared to one to two and a half minute startups on the similar CFM56 and IAE V2500 engines; hardware fixes and software upgrades decreased the time required by a little over a minute, and cooling down both engines at the same time saved slightly over two minutes, for a total reduction of three and a half minutes. These modifications were included on new-build engines, as well as retrofitting existing units. Pratt & Whitney continued to improve start up times, with fuel-nozzle modifications and oil filling procedure changes expected to save another minute when introduced by the end of 2017.
To create a better seal and reduce cooling time by 1 min, a cubic boron nitride coating was applied to the 11 integrally bladed rotors tips: the A321neo production engines start times will be similar to the V2500.
As IndiGo and Go Air operate in humid, hot, polluted and salty environment, 42 engines were prematurely removed from those companies' aircraft by 24 February, with more to come and after certain warnings, mandatory checks, and possible repairs are due after only three flight hours instead of ten : 28 engine removals were due to an air seal leakage in the third bearing, allowing metal particles to enter the oil system, triggering detectors. Pratt & Whitney discovered these issues in 2015 and revised the design in 2016 after the 160th engine with improved bearing compartments and damping for the third and fourth bearings to offset the rotor-bow, with the repairs retrofitted on-wing after testing at Airbus and Pratt. Boosting durability of the third bearing compartment air seal, the upgraded carbon seal package was certified on April 12 and can be retrofited over a typical night stop.
Thirteen engine removals were due to borescope inspections revealing blocked cooling holes in combustion chamber panels, apparently due to saltier air, and Pratt & Whitney developed and tested a more durable combustor design to address a tone problem, with the fix to be introduced in September. Spirit Airlines reported that the bleed air system froze shut on occasion due to cold temperatures on four of its five A320neos, a problem also experienced by IndiGo, leading Spirit to impose a 30,000 feet (9,100 m) ceiling on their aircraft. To avoid troubles with the P&W1100G engines, JetBlue Airways switched its first three Airbus A321neos in 2018 to A321ceos, deferring delivery of its first A321neos to 2019 among its order for 60.
In 2017, IndiGo had to ground seven planes, two in May, four in June and one in July after, their engines out of service, waiting for upgrades: a lack of spare parts—grounding also All Nippon Airways and Hong Kong Express Airways A320s—has been compounded by a new Indian tax on goods and services impeding imports. With removals without sufficient spare engines available, the airline had to ground as many as nine jets on some days, operations disruptions are understood by Pratt & Whitney which struggles to fix glitches and sent compensation while design changes could take a year and sorting out the issue one and a half years. Indigo had to replace 69 engines from mid 2016 till early 2018.
Knife edge seal
In February 2018, after in-flight failures of PW1100G with its high pressure compressor aft hub modified – apparently problems of its knife edge seal, the EASA and Airbus grounded some A320neo family aircraft until they are fitted with spares. Later, Airbus decided to stop accepting additional PW1100G engines for A320neo aircraft. Despite the part failure that could hold up engine deliveries to Airbus until April, P&W reaffirmed its 2018 delivery goal of doubling its 2017 rate of 374 engines as nearly 100 engines delivered to Airbus are problematic, including 43 in service.
To solve the issue, a revised configuration with a mature and approved design will be released from early March engine deliveries. The EASA and FAA imposed flying A320neos with mixed engines and forbid ETOPS, but the Indian DGCA went further and grounded all A320neo with an affected engine. The design flaw will cost Pratt & Whitney $50 million to resolve. P&W will replace the seals in the 55 engines delivered to Airbus and in the 43 in-service GTFs, as the target of 750 deliveries in 2018 seems more remote.
By September 2018, the A320neo's PW1100Gs were experiencing increasing engine vibrations, sometimes before 1,000 flight hours and mostly at high power settings in the climb phase, requiring an early engine change. Lufthansa's A320neos were grounded 254 days since first delivery, 13 times worse than for its A320ceos, 78% of the time due to engine issues as 14 unplanned engine changes were made. In September 2018 its A320neos utilization was half of its A320ceos. By the end of November, Airbus planned to explain the root cause and give an in-depth analysis by the end of 2018. Pratt & Whitney stated the A220's and Embraer E2's PW1500G/PW1900Gs are free from the issue and that less than 2% of PW1100Gs are affected while 182 GTF-powered A320/A321neos have been delivered.
By October 2018 about 10 P&W-powered A320neos were typically grounded for repairs at any given time. On 21 January 2019 an IndiGo flight returned to the airport shortly after takeoff after the pilot observed high vibration in one of its PW1100G-JM engines.[importance?]
Pratt & Whitney has reduced life limits on PW1500G (installed on the Airbus A220) and PW1900G (installed on Embraer E190/E195-E20) high-pressure compressor front hubs after corrosion was discovered during routine engine overhaul. This corrosion reduces the low-cycle fatigue capability and may lead to cracking before the component reaches its life limit.
- Airbus A320neo: PW1100G
- Irkut MC-21: PW1400G
- Airbus A220: PW1500G (exclusive)
- Embraer E-Jet E2 family : PW1700G & PW1900G  (exclusive)
- Mitsubishi Regional Jet: PW1200G (exclusive)
|Fan Diameter||81 in (206 cm), 20 blades||73 in (185 cm), 18 blades||56 in (142 cm), 18 blades|
|Static Thrust||24,000–35,000 lbf
|Compressor||Axial flow, 1 geared fan, 3 stage LPC, 8 stage HPC||same except 2 stage LPC|
|Combustor||Talon-X Lean-Burn Combustor|
|Turbine||Axial flow, 2-stage HP, 3-stage LP|
|Application||A320neo family||Irkut MC-21||A220 family||E-Jets E2 190/195||E-Jets E2 175||MRJ70/90|
|Service entry||January 2016||2019||15 July 2016||2018||2021||2020|
|Type Certificate Data sheet|
|Length[a]||3.401 m / 133.898 in||3.184 m / 125.4 in||113.5 in (2.88 m)|
|fan case diameter||2.224 m (87.566 in)||2.006 m / 79.0 in||62 in (1.6 m)|
|weight||2857.6 kg (6300 lb)||2177 kg (4800 lb)||3,800 lb (1,700 kg)|
|Takeoff thrust||30/33G: 147.28 kN / 33,110 lbf
27G: 120.43 kN / 27,075 lbf
24/22G: 107.82 kN / 24,240 lbf
|19G: 87.96 kN / 19,775 lbf
21G: 97.73 kN / 21,970 lbf
24/25G: 108.54 kN / 24,400 lbf
|19G: 92.79 kN / 20,860 lbf
21G: 100.31 kN / 22,550 lbf
22/23G: 105.93 kN / 23,815 lbf
|Thrust-to-weight ratio||3.85 – 5.26||5.01||4.12 – 5.08||4.35 – 4.96||5.05|
- CFM International LEAP
- under development
- geared turbofan
- fan spinner face to aft flange
- Guy Norris (Jun 2, 2017). "Boeing's NMA Poses Propulsion Puzzle For Engine Makers". Aviation Week & Space Technology.
- "JetBlue Picks Pratt Over CFM for Engines Valued at $1.03 Billion". Bloomberg. December 15, 2011.
- Spaeth, Andreas (25 January 2016). "Onboard Lufthansa's First Airbus A320neo Flight – Airways Magazine".
- "Pratt & Whitney starts new ADP test phase". Aviation Week. July 26, 1993. p. 40.
- Bill Sweetman and Oliver Sutton (June 1, 1998). "Pratt & Whitney's surprise leap". Interavia Business & Technology. Highbeam Research. Archived from the original on October 19, 2012.
- "Pratt & Whitney's next leap in engine technology". Aerospace Engineering Magazine Online. SAE International. 1998. Top 15 Technology Innovations. Archived from the original on 2011-11-29.
- "Products". International Aero Engines.
- "Pratt & Whitney Launches Geared Turbofan Engine". Aviation Week. Feb 23, 1998. p. 32.
- "Geared-turbofan engine design targets cost, complexity". Aviation Week. Feb 23, 1998. p. 34.
- Robert Luedeman (April 17, 2006). "The Short Life and Untimely Demise of the PW8000". The Dougloid Papers.[self-published source?]
- "P&W readies for CSeries "third knob" engine testing". Flight Global. 23 February 2011.
- "Farnborough '08: Pratt & Whitney Launches PurePower Engine Family". Aero-News Network. Jul 14, 2008.
- Peter Coy (October 15, 2015). "The Little Gear That Could Reshape the Jet Engine". Bloomberg.
- "Airbus-owned A340 flies P&W geared turbofan engine". Flight Global. October 14, 2008.
- "Pratt & Whitney geared PW1524G testing underway". Flight Global. October 30, 2010.
- "Transport Canada Certifies Pratt & Whitney PurePower® PW1500G Engine for Bombardier CSeries Aircraft" (Press release). Bombardier. February 13, 2013.
- "PurePower® PW1100G-JM Engine" (PDF) (Press release). Pratt and Whitney. May 15, 2017.
- "IN FOCUS: Pratt completes first flight of PW1100G engine". Flight Global. 3 June 2013.
- "Bombardier's CSeries Aircraft Completes Historic First Flight" (Press release). Bombardier. September 16, 2013.
- "A320neo Completes First Flight". Aviation Week. Sep 25, 2014.
- "FAA Certifies PurePower® Engine for A320neo Aircraft" (Press release). Pratt & Whitney. December 19, 2014.
- "P&W launches engine flight test campaign for new Embraer jets". Flight International. 3 November 2015. p. 12.
- "Pontifications: GTF faces steep learning curve on costs". Leeham News. June 13, 2016.
- "MTU formally opens A320neo engine line". Flight Global. 21 October 2016.
- Guy Norris (Nov 28, 2016). "Pratt Sees Busy Year-End As It Targets GTF Catch-Up". Aviation Week & Space Technology.
- Rick Clough (22 Aug 2017). "Pratt's $10 Billion Jet Engine Lags GE by 10-to-1 on New Orders". Bloomberg.
- Stephen Trimble (24 Oct 2017). "P&W speeds up GTF deliveries, but considers new design changes". Flightglobal.
- Chris Kjelgaard (March 16, 2018). "Pratt & Whitney Details GTF Recovery Schedule". AIN.
- Mavis Toh (3 July 2018). "apanese assembly of PW1200G underway in Nagoya". Flightglobal.
- Stephen Trimble (13 Oct 2017). "New tests move P&W closer to ultra-high bypass GTF". Flightglobal.
- "Bjorn's Corner: Engine architectures". Leeham News. 4 March 2016.
- Tim Wuerfel (May 26, 2017). "Flying The A321neo: Technology Upgrades Under The Skin". Aviation Week & Space Technology.
- Ernest S. Arvai (May 31, 2017). "An Update: GTF Engine from Pratt & Whitney". AirInsight.
- Bernie Baldwin (Sep 7, 2018). "Profitability Is Aim Of Crossover Jets' Better Maintainability". Aviation Week & Space Technology.
- "Airbus Delivers A320neo to Lufthansa". Wall street journal. January 20, 2016.
- Sean Broderick (Aug 31, 2017). "Issues With Newest Engines Provide Early MRO-Proving Opportunities". Aviation Week Network.
- Joe Anselmo (Jan 11, 2018). "GTF Reaches 500,000 Service Hours". Aviation Week Network.
- Guy Norris (Mar 19, 2018). "Pratt: GTF-Powered A320neos To Be Fixed By End Of April". Aviation Week Network.
- "GTF better, says one airline; engine OEMs need 12–18 months to solve issues, says lessor". Leeham News. May 16, 2018.
- "New P&W President Has 'Nothing To Hide' On GTF Starter Issue". Aviation Week. 16 February 2016.
- Thomson Reuters StreetEvents (July 26, 2016). "Edited Transcript of UTX earnings conference call or presentation 26-Jul-16". Yahoo Finance.
- "Airbus: Delivery of P&W 'golden' A320neo engine imminent". Flight Global. 27 July 2016.
- Jens Flottau and Guy Norris (Mar 24, 2017). "Airlines Praise Airbus A320neo Performance, But Engine Issues Remain". Aviation Week & Space Technology.
- Mike Gerzanics (26 May 2017). "Flight test: A321neo stretches its legs". Flight Global.
- Guy Norris (Apr 20, 2017). "Pratt & Whitney begins A320neo engine seal upgrade". Air Transport World. Aviation Week.
- Benjamin Bearup (10 April 2017). "Report: Spirit A320neo Fleet Suffering PW1000G Engine Challenges". Airways Magazine.
- "JetBlue switches A321neos as Pratt troubles persist". Flight Global. 25 Apr 2017.
- Anurag Kotoky , Rick Clough , and Benjamin D Katz (13 Jul 2017). "Pratt Engine Fixes Prompt IndiGo to Ground Seven Airbus Planes". bloomberg.CS1 maint: Multiple names: authors list (link)
- Anurag Kotoky (31 Jul 2017). "Pratt's Woes With Engines Spur Compensation to Biggest User". bloomberg.
- Anurag Kotoky (11 Feb 2018). "IndiGo Says Has Made 69 Pratt Engine Replacements in 18 Months". Bloomberg.
- Stephen Trimble (9 Feb 2018). "In-flight failures prompt emergency call for P&W-powered A320neos". Flightglobal.
- Jens Flottau and Aaron Karp (February 10, 2018). "Airbus stops accepting PW1100G engines for A320neo aircraft". Air Transport World. Retrieved 2018-02-11.
- Stephen Trimble (16 Feb 2018). "P&W reaffirms 2018 GTF delivery goal despite part failure". Flightglobal.
- "Pratt & Whitney Implements Solution to PW1100G-JM" (Press release). Pratt & Whitney. Feb 21, 2018.
- Bjorn Fehrm (March 14, 2018). "Pratt & Whitney's Indian trouble". Leeham.
- Stephen Trimble (16 March 2018). "Fixing faulty GTF seal to cost $50 million: P&W". Flightglobal.
- Jens Flottau (Sep 6, 2018). "A320neo Engine Vibration Issue Hits Lufthansa Ops". Aviation Week Network.
- Michael Gubisch (11 Sep 2018). "A320neo operators affected by PW1100G vibration issue". Flightglobal.
- "Engine vibrations unsatisfactory" (PDF). New Zealand aviation news. 2018.
- "IndiGo flight returns to base after 'high vibration' in Pratt & Whitney engine". Reuters. Jan 22, 2019.
- "Airbus A220 and Embraer E2 operators are being advised of cycle limit amendments to the high-pressure compressor hub on their Pratt & Whitney engines". Flightglobal. 4 June 2019.
- Jon Ostrower (30 Nov 2010). "Airbus set to launch A320 NEO". flight international.
- "Airbus offers new fuel saving engine options for A320 Family" (Press release). Airbus. 1 December 2010.
- Mary Kirby (13 Apr 2010). "P&W seals deal to begin design on GTF for Russia's MS-21". flight international.
- "PurePower PW1000G Engine". utc.com.
- "PurePower PW1700G & PW1900G Engines" (PDF). Pratt & Whitney.
- Ernest S. Arvai (February 6, 2013). "Embraer Launches E-Jet RE: Assessing the Impact". airinsight.com.
- "Pratt & Whitney Launches Geared Turbofan Engine with Mitsubishi Regional Jet" (Press release). Pratt & Whitney. 9 Oct 2007.
- Stephen Trimble (9 Oct 2007). "Pratt & Whitney Geared Turbofan engine selected to power Mitsubishi Regional Jet". Flight international.
- "Russia will start the production of Sukhoi SuperJet NG in 2019–2020". ruaviation.com. 2 August 2013.
- "Fokker 120 specifications". Rekkof Aircraft.
- "PW1000G". MTU.
- "Pratt & Whitney Unveils Higher Thrust PurePower Engine" (Press release). Pratt & Whitney. 20 May 2014.
- "PurePower PW1500G Engine" (PDF). Pratt & Whitney.
- Ernest S. Arvai (October 2, 2012). "Technical Analysis: The Core of the PW1000G Geared Turbo-Fan". AirInsight.
- "Type Certificate data sheet for PW1100G-JM Series Engines" (PDF). EASA. 15 Sep 2018.
- "Type Certificate data sheet IM.E.090 for PW1500G Series Engines" (PDF). EASA. 27 February 2018.
- "Type Certificate data sheet E00094EN" (PDF). FAA. 15 May 2017.
|Wikimedia Commons has media related to Pratt & Whitney PW1000G.|
- Official website
- Rob Coppinger (9 Oct 2007). "MTU Aero Engines designs high-speed turbine for P&W's GTF geared turbofan". Flightglobal.
- Jessica Shapiro (Jun 19, 2008). "Green Technology: Jets Gear up to Fly Greener". Machine Design. Penton. Pratt & Whitney’s geared turbofan program is set to take to the skies with innovations ranging from reduction gearing to low-emission combustion cycles.
- Jon Ostrower (18 Aug 2008). "First phase of GTF flight testing complete". Flightglobal.
- "Pratt & Whitney's Geared Turbofan Growth Plan". Aviation Week & Space Technology. Jul 1, 2013. Tests suggest A320NEO engines will deliver on promises, but who will win in the long term?.
- "Pratt and Whitney PW1100G Geared Turbofan Engine". The Flying Engineer. 8 Jul 2013.
- Stephen Trimble (29 June 2018). "FAA directive calls for part changes on 189 PW1100G engines". flightglobal.
- Stephen Trimble (6 July 2018). "Analysis: P&W details revised geared turbofan recovery path". flightglobal.
- Gregory Polek (July 11, 2018). "Pratt & Whitney Heeds Hard Lessons Learned on GTF". AIN online.