Jump to content

Black Mill, Whitstable

Coordinates: 51°20′46.5″N 1°1′20″E / 51.346250°N 1.02222°E / 51.346250; 1.02222
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Monkbot (talk | contribs) at 09:09, 14 September 2019 (Millers: Task 16: replaced (1×) / removed (0×) deprecated |dead-url= and |deadurl= with |url-status=;). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Black Mill, Whitstable
Map
Origin
Grid referenceTR 105 652
Coordinates51°20′46.5″N 1°1′20″E / 51.346250°N 1.02222°E / 51.346250; 1.02222
Year built1815
Information
PurposeCorn mill
TypeSmock mill
StoreysFour-storey smock
Base storeysSingle-storey base
Smock sidesEight-sided
No. of sailsFour
Type of sailsPatent sails
WindshaftCast iron
WindingFantail
Fantail bladesSix blades
No. of pairs of millstonesThree pairs

Black Mill, or Borstal Hill Mill is a smock mill in Whitstable, Kent, England that was built in 1815. It is now a part of a private residence at the end of Millers Court.

History

Black Mill was built in 1815. A mill that previously stood on the site was marked on Bowen's map of 1736. The mill had been painted white when built, but was tarred in 1885, thus gaining its name of Black Mill. Trinity House had to be notified, as the mill was a navigational landmark for sailors. The mill last worked circa 1905 and in 1928 was converted into a studio by the artist Laurence Irving, the grandson of Sir Henry Irving.[1] The mill was later converted into a motel.[2] The converted tower still contains the major milling machinery, and externally bears stocks and a dummy fantail.

Description

Black mill is a four-storey smock mill on a single-storey brick base. There was a stage at first-floor level. It had four patent sails carried on a cast-iron windshaft. The Brake wheel survives. This drove a cast-iron Wallower mounted on a wooden Upright Shaft. The Great Spur Wheel also survives. The mill drove three pairs of millstones overdrift. It was winded by a fantail.[2]

Millers

  • Lawes & Carr 1839 - 1845
  • William Carr 1845
  • Jonathan Rye
  • Henry Somerford 1860 - 1866
  • James Callingham 1866 -
  • Callingham Bros. - 1899
  • George & William Dawking 1899 - 1905

References for above:-[1][2][3]

See also

References

  1. ^ a b Coles Finch, William (1933). Watermills and Windmills. London: C W Daniel Company. p. 301.
  2. ^ a b c West, Jenny (1973). The Windmills of Kent. London: Charles Skilton Ltd. pp. 77–80. ISBN 0284-98534-1.
  3. ^ "Directory of Kent Mill People". The Mills Archive Trust. Archived from the original on 2009-04-16. Retrieved 2008-04-19.

Further reading