Jump to content

Buckminsterfullerene

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 64.92.18.135 (talk) at 02:28, 20 March 2017 (→History). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

This article is about the molecule. For other uses, see Buckyball (disambiguation).
Buckminsterfullerene
Names
IUPAC name
(C60-Ih)[5,6]fullerene
Other names
Buckyball; Fullerene-C60; [60]fullerene
Identifiers
3D model (JSmol)
5901022
ChEBI
ChemSpider
ECHA InfoCard 100.156.884 Edit this at Wikidata
  • InChI=1S/C60/c1-2-5-6-3(1)8-12-10-4(1)9-11-7(2)17-21-13(5)23-24-14(6)22-18(8)28-20(12)30-26-16(10)15(9)25-29-19(11)27(17)37-41-31(21)33(23)43-44-34(24)32(22)42-38(28)48-40(30)46-36(26)35(25)45-39(29)47(37)55-49(41)51(43)57-52(44)50(42)56(48)59-54(46)53(45)58(55)60(57)59 checkY
    Key: XMWRBQBLMFGWIX-UHFFFAOYSA-N checkY
  • InChI=1/C60/c1-2-5-6-3(1)8-12-10-4(1)9-11-7(2)17-21-13(5)23-24-14(6)22-18(8)28-20(12)30-26-16(10)15(9)25-29-19(11)27(17)37-41-31(21)33(23)43-44-34(24)32(22)42-38(28)48-40(30)46-36(26)35(25)45-39(29)47(37)55-49(41)51(43)57-52(44)50(42)56(48)59-54(46)53(45)58(55)60(57)59
    Key: XMWRBQBLMFGWIX-UHFFFAOYAU
  • InChI=1S/C60/c1-2-5-6-3(1)8-12-10-4(1)9-11-7(2)17-21-13(5)23-24-14(6)22-18(8)28-20(12)30-26-16(10)15(9)25-29-19(11)27(17)37-41-31(21)33(23)43-44-34(24)32(22)42-38(28)48-40(30)46-36(26)35(25)45-39(29)47(37)55-49(41)51(43)57-52(44)50(42)56(48)59-54(46)53(45)58(55)60(57)59
    Key: XMWRBQBLMFGWIX-UHFFFAOYSA-N
  • c12c3c4c5c1c6c7c8c2c9c1c3c2c3c4c4c%10c5c5c6c6c7c7c%11c8c9c8c9c1c2c1c2c3c4c3c4c%10c5c5c6c6c7c7c%11c8c8c9c1c1c2c3c2c4c5c6c3c7c8c1c23
Properties
C60
Molar mass 720.660 g·mol−1
Appearance Dark needle-like crystals
Density 1.65 g/cm3
Melting point sublimates at ~ 600 °C (1,112 °F; 873 K)[1]
insoluble in water
Structure
Face-centered cubic, cF1924
Fm3m, No. 225
a = 1.4154 nm
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)
Part of a series of articles on
Nanomaterials
Carbon nanotubes
Fullerenes
Other nanoparticles
Nanostructured materials

Buckminsterfullerene (or bucky-ball) is a spherical fullerene molecule with the formula C60. It has a cage-like fused-ring structure (truncated icosahedron) which resembles a soccer ball (football), made of twenty hexagons and twelve pentagons, with a carbon atom at each vertex of each polygon and a bond along each polygon edge.

It was first generated in 1985 by Harold Kroto, James R. Heath, Sean O'Brien, Robert Curl, and Richard Smalley at Rice University.[2] Kroto, Curl and Smalley were awarded the 1996 Nobel Prize in Chemistry for their roles in the discovery of buckminsterfullerene and the related class of molecules, the fullerenes. The name is a reference to Buckminster Fuller, as C60 resembles his trademark geodesic domes. Buckminsterfullerene is the most common naturally occurring fullerene molecule, as it can be found in small quantities in soot.[3][4] Solid and gaseous forms of the molecule have been detected in deep space.[5]

Buckminsterfullerene is one of the largest objects to have been shown to exhibit wave–particle duality; as stated in the theory every object exhibits this behavior.[6][7] Its discovery led to the exploration of a new field of chemistry, involving the study of fullerenes.

Etymology

Buckminsterfullerene derives from the name of the noted futurist and inventor Buckminster Fuller. One of his designs of a geodesic dome structure bears great resemblance to C60; as a result, the discoverers of the allotrope named the newfound molecule after him. The general public, however, sometimes refers to buckminsterfullerene, and even Fuller's dome structure, as buckyballs.[8]

History

Main article: Fullerene

The structure associated with fullerenes was described by Leonardo da Vinci.[9] Albrecht Dürer also reproduced a similar icosahedron containing 12 pentagonal and 20 hexagonal faces but there are no clear documentations of this.[10][11]

Discovery

Many soccer balls have the same shape as buckminsterfullerene, C60.

Theoretical predictions of buckyball molecules appeared in the late 1960s – early 1970s,[12][13] but they went largely unnoticed. In the early 1970s, the chemistry of unsaturated carbon configurations was studied by a group at the University of Sussex, led by Harry Kroto and David Walton. In the 1980s a technique was developed by Richard Smalley and Robert Curl at Rice University, Texas to isolate these substances. They used laser vaporization of a suitable target to produce clusters of atoms. Kroto realized that by using a graphite target,[14] any carbon chains formed could be studied. Another interesting fact is that, at the same time, astrophysicists were working along with spectroscopists to study infrared emissions from giant red carbon stars.[11][15][16] Smalley and team were able to use a laser vaporization technique to create carbon clusters which could potentially emit infrared at the same wavelength as had been emitted by the red carbon star.[11][17] Hence, the inspiration came to Smalley and team to use the laser technique on graphite to create the first fullerene molecule.

C60 was discovered in 1985 by Robert Curl, Harold Kroto and Richard Smalley. Using laser evaporation of graphite they found Cn clusters (where n>20 and even) of which the most common were C60 and C70. A solid rotating graphite disk was used as the surface from which carbon was vaporized using a laser beam creating hot plasma that was then passed through a stream of high-density helium gas.[18] The carbon species were subsequently cooled and ionized resulting in the formation of clusters. Clusters ranged in molecular masses but Kroto and Smalley found predominance in a C60 cluster that could be enhanced further by letting the plasma react longer.[3, 6] They also discovered that the C60 molecule formed a cage-like structure, a regular truncated icosahedron.[11][18]

For this discovery they were awarded the 1996 Nobel Prize in Chemistry. The discovery of buckyballs was surprising, as the scientists aimed the experiment at producing carbon plasmas to replicate and characterize unidentified interstellar matter. Mass spectrometry analysis of the product indicated the formation of spheroidal carbon molecules.[12]

The experimental evidence, a strong peak at 720 atomic mass units, indicated that a carbon molecule with 60 carbon atoms was forming, but provided no structural information. The research group concluded after reactivity experiments, that the most likely structure was a spheroidal molecule. The idea was quickly rationalized as the basis of an icosahedral symmetry closed cage structure. Kroto mentioned geodesic dome structures of the noted futurist and inventor Buckminster Fuller as influences in the naming of this particular substance as buckminsterfullerene.[12]

Synthesis

High-vacuum electrolysis of a C60-fullerene derivative. Slow diffusion into the anode (right side) yields the characteristic purple color of pure C60.

In 1989 physicists Wolfgang Krätschmer, Konstantinos Fostiropoulos, and Donald R. Huffman observed unusual optical absorptions in thin films of carbon dust (soot). The soot had been generated by an arc-process between two graphite electrodes in a helium atmosphere where the electrode material evaporates and condenses forming soot in the quenching atmosphere. Among other features, the IR spectra of the soot showed four discrete bands in close agreement to those proposed for C60.[19][20]
Another paper on the characterization and verification of the molecular structure followed on in the same year (1990) from their thin film experiments, and detailed also the extraction of an evaporable as well as benzene soluble material from the arc-generated soot. This extract had TEM and X-ray crystal analysis consistent with arrays of spherical C60 molecules, approximately 1.0 nm in van der Waals diameter[21] as well as the expected molecular mass of 720 u for C60 (and 840 u for C70) in their mass spectra.[22] The method was simple and efficient to prepare the material in gram amounts per day (1990) which has boosted the fullerene research and is even today applied for the industrial production of fullerenes.

Alternatively, soot is produced by laser ablation of graphite or pyrolysis of aromatic hydrocarbons. Fullerenes are extracted from the soot using a multistep procedure. First, the soot is dissolved in appropriate organic solvents. This step yields a solution containing up to 75% of C60, as well as other fullerenes. These fractions are separated using chromatography.[23] Generally, the fullerenes are dissolved in hydrocarbon or halogenated hydrocarbon and separated using alumina columns.[24]

Further developments

The versatility of fullerene molecules has led to a large amount of research exploring their properties. One interesting property is the relatively large volume of the internal space of the molecule. Atoms of different elements may be placed inside the molecular cage formed by the carbon atoms.[25]

Beam-experiments conducted between 1985 and 1990 provided more evidence for the stability of C60 while supporting the closed-cage structural theory and predicting some of the bulk properties such a molecule would have. Around this time, intense theoretical group theory activity also predicted that C60 should have only four IR-active vibrational bands, on account of its icosahedral symmetry.[21]

In 2012 a toxicity study by Tarek Baati and Fathi Moussa from the University of Paris, showed that C60 dissolved in olive oil was not toxic to rodents.[26] In a video interview with Professor Fathi Moussa regarding the study, further information was provided regarding the toxicity study, and the method of action whereby the lifespan of the rodents was increased by 90% relative to controls when the animals were dosed with C60 olive oil.[27]

Properties

Molecule

The structure of a buckminsterfullerene is a truncated icosahedron with 60 vertices and 32 faces (20 hexagons and 12 pentagons where no pentagons share a vertex) with a carbon atom at the vertices of each polygon and a bond along each polygon edge. The van der Waals diameter of a C
60 molecule is about 1.01 nanometers (nm). The nucleus to nucleus diameter of a C
60 molecule is about 0.71 nm. The C
60 molecule has two bond lengths. The 6:6 ring bonds (between two hexagons) can be considered "double bonds" and are shorter than the 6:5 bonds (between a hexagon and a pentagon). Its average bond length is 0.14 nm. Each carbon atom in the structure is bonded covalently with 3 others.[28]

The C
60 molecule is extremely stable,[29] withstanding high temperatures and high pressures. The exposed surface of the structure can selectively react with other species while maintaining the spherical geometry.[30] Atoms and small molecules can be trapped within the molecule without reacting.

C
60 undergoes six reversible, one-electron reductions to C6−
60, but oxidation is irreversible. The first reduction needs ≈1.0 V (Fc/Fc+
), showing that C60 is a moderately effective electron acceptor. C
60 tends to avoid having double bonds in the pentagonal rings, which makes electron delocalization poor, and results in C
60 not being "superaromatic". C60 behaves very much like an electron deficient alkene and readily reacts with electron rich species.[21]

A carbon atom in the C
60 molecule can be substituted by a nitrogen or boron atom yielding a C
59N or C59B respectively.[31]

Orthogonal projections
Centered by Vertex Edge
5–6 		Edge
6–6 		Face
Hexagon 		Face
Pentagon
Image
Projective
symmetry 		[2] [2] [2] [6] [10]

Solution

C60 solution
Solubility of C60[32][33][34]
Solvent Solubility
(mg/mL)
1-chloronaphthalene 51
1-methylnaphthalene 33
1,2-dichlorobenzene 24
1,2,4-trimethylbenzene 18
tetrahydronaphthalene 16
carbon disulfide 8
1,2,3-tribromopropane 8
xylene 5
bromoform 5
cumene 4
toluene 3
benzene 1.5
carbon tetrachloride 0.447
chloroform 0.25
n-hexane 0.046
cyclohexane 0.035
tetrahydrofuran 0.006
acetonitrile 0.004
methanol 0.00004
water 1.3 × 10−11
pentane 0.004
octane 0.025
isooctane 0.026
decane 0.070
dodecane 0.091
tetradecane 0.126
dioxane 0.0041
mesitylene 0.997
dichloromethane 0.254
Optical absorption spectrum of C
60 solution, showing reduced absorption for the blue (~450 nm) and red (~700 nm) light that results in the purple color.

Fullerenes are sparingly soluble in aromatic solvents such as toluene and carbon disulfide, but insoluble in water. Solutions of pure C60 have a deep purple color which leaves a brown residue upon evaporation. The reason for this color change is the relatively narrow energy width of the band of molecular levels responsible for green light absorption by individual C60 molecules. Thus individual molecules transmit some blue and red light resulting in a purple color. Upon drying, intermolecular interaction results in the overlap and broadening of the energy bands, thereby eliminating the blue light transmittance and causing the purple to brown color change.[35]

C
60 crystallises with some solvents in the lattice ("solvates"). For example, crystallization of C60 in benzene solution yields triclinic crystals with the formula C60·4C6H6. Like other solvates, this one readily releases benzene to give the usual fcc C60. Millimeter-sized crystals of C60 and C
70 can be grown from solution both for solvates and for pure fullerenes.[36][37]

Solid

C60 solid
C
60 crystal structure

In solid buckminsterfullerene, the molecules C60 stick together via the van der Waals forces in the fcc (face-centered cubic) motif. At low temperatures the individual molecules are locked against rotation. Upon heating, they start rotating at about −20 °C. This results in a first-order phase transition to a fcc structure and a small, yet abrupt increase in the lattice constant from 1.411 to 1.4154 nm.[38]

C
60 solid is as soft as graphite, but when compressed to less than 70% of its volume it transforms into a superhard form of diamond (see aggregated diamond nanorod). C
60 films and solution have strong non-linear optical properties; in particular, their optical absorption increases with light intensity (saturable absorption).

C
60 forms a brownish solid with an optical absorption threshold at ≈1.6 eV.[39] It is an n-type semiconductor with a low activation energy of 0.1–0.3 eV; this conductivity is attributed to intrinsic or oxygen-related defects.[40] Fcc C60 contains voids at its octahedral and tetrahedral sites which are sufficient large (0.6 and 0.2 nm respectively) to accommodate impurity atoms. When alkali metals are doped into these voids, C60 converts from a semiconductor into a conductor or even superconductor.[38][41]

Band structure and superconductivity

Cs3C60 crystal structure

In 1991, Haddon et al.[42] found that intercalation of alkali-metal atoms in solid C60 leads to metallic behavior.[43] In 1991, it was revealed that potassium-doped C60 becomes superconducting at 18 K.[44] This was the highest transition temperature for a molecular superconductor. Since then, superconductivity has been reported in fullerene doped with various other alkali metals.[45][46] It has been shown that the superconducting transition temperature in alkaline-metal-doped fullerene increases with the unit-cell volume V.[47][48] As caesium forms the largest alkali ion, caesium-doped fullerene is an important material in this family. Recently, superconductivity at 38 K has been reported in bulk Cs3C60,[49] but only under applied pressure. The highest superconducting transition temperature of 33 K at ambient pressure is reported for Cs2RbC60.[50]

The increase of transition temperature with the unit-cell volume had been believed to be evidence for the BCS mechanism of C60 solid superconductivity, because inter C60 separation can be related to an increase in the density of states on the Fermi level, N(εF). Therefore, there have been many efforts to increase the interfullerene separation, in particular, intercalating neutral molecules into the A3C60 lattice to increase the interfullerene spacing while the valence of C60 is kept unchanged. However, this ammoniation technique has revealed a new aspect of fullerene intercalation compounds: the Mott transition and the correlation between the orientation/orbital order of C60 molecules and the magnetic structure.[51]

Electronic structure of C60 under "ideal" spherical (left) and "real" icosahedral symmetry (right).

The C60 molecules compose a solid of weakly bound molecules. The fullerites are therefore molecular solids, in which the molecular properties still survive. The discrete levels of a free C60 molecule are only weakly broadened in the solid, which leads to a set of essentially nonoverlapping bands with a narrow width of about 0.5 eV.[43] For an undoped C60 solid, the 5-fold hu band is the HOMO level, and the 3-fold t1u band is the empty LUMO level, and this system is a band insulator. But when the C60 solid is doped with metal atoms, the metal atoms give electrons to the t1u band or the upper 3-fold t1g band.[52] This partial electron occupation of the band may lead to metallic behavior. However, A4C60 is an insulator, although the t1u band is only partially filled and it should be a metal according to band theory.[53] This unpredicted behavior may be explained by the Jahn–Teller effect, where spontaneous deformations of high-symmetry molecules induce the splitting of degenerate levels to gain the electronic energy. The Jahn–Teller type electron-phonon interaction is strong enough in C60 solids to destroy the band picture for particular valence states.[51]

A narrow band or strongly correlated electronic system and degenerated ground states are important points to understand in explaining superconductivity in fullerene solids. When the inter-electron repulsion U is greater than the bandwidth, an insulating localized electron ground state is produced in the simple Mott–Hubbard model. This explains the absence of superconductivity at ambient pressure in caesium-doped C60 solids.[49] Electron-correlation-driven localization of the t1u electrons exceeds the critical value, leading to the Mott insulator. The application of high pressure decreases the interfullerene spacing, therefore caesium-doped C60 solids turn to metallic and superconducting.

A fully developed theory of C60 solids superconductivity is still lacking, but it has been widely accepted that strong electronic correlations and the Jahn–Teller electron–phonon coupling[54] produce local electron-pairings that show a high transition temperature close to the insulator–metal transition.[55]

Chemical reactions and properties

Hydrogenation

C60 exhibits a small degree of aromatic character, but it still reflects localized double and single C–C bond characters. Therefore, C60 can undergo addition with hydrogen to give polyhydrofullerenes. C60 also undergoes Birch reduction. For example, C60 reacts with lithium in liquid ammonia, followed by tert-butanol to give a mixture of polyhydrofullerenes such as C60H18, C60H32, C60H36, with C60H32 being the dominating product. This mixture of polyhydrofullerenes can be re-oxidized by 2,3-dichloro-5,6-dicyano-1,4-benzoquinone to give C60 again.

Selective hydrogenation method exists. Reaction of C60 with 9,9′,10,10′-dihydroanthracene under the same conditions, depending on the time of reaction, gives C60H32 and C60H18 respectively and selectively.[56]

C60 can be hydrogenated,[57] suggesting that a modified buckminsterfullerene called organometallic buckyballs (OBBs) could become a vehicle for "high density, room temperature, ambient pressure storage of hydrogen". These OBBs are created by binding atoms of a transition metal (TM) to C60 or C48B12 and then binding many hydrogen atoms to this TM atom, dispersing them evenly throughout the inside of the organometallic buckyball. The study found that the theoretical amount of H2 that can be retrieved from the OBB at ambient pressure approaches 9 wt %, a mass fraction that has been designated as optimal for hydrogen fuel by the U.S. Department of Energy.

Halogenation

Addition of fluorine, chlorine, and bromine occurs for C60.

Fluorine atoms are small enough for a 1,2-addition, while Cl2 and Br2 add to remote C atoms due to steric factors. For example, in C60Br8 and C60Br24, the Br atoms are in 1,3- or 1,4-positions with respect to each other.

Under various conditions a vast number of halogenated derivatives of C60 can be produced, some with extraordinary selectivity on one or two isomers over the other possible ones.

Addition of fluorine and chlorine usually results in a flattening of the C60 framework into a drum-shaped molecule.[56]

Addition of oxygen atoms

Solutions of C60 can be oxygenated to the epoxide C60O. Ozonation of C60 in 1,2-xylene at 257K gives an intermediate ozonide C60O3, which can be decomposed into 2 forms of C60O. Decomposition of C60O3 at 296 K gives the epoxide, but photolysis gives a product in which the O atom bridges a 5,6-edige.[56]

Cycloadditions

The Diels–Alder reaction is commonly employed to functionalize C60. Reaction of C60 with appropriate substituted diene gives the corresponding adduct.

The Diels–Alder reaction between C60 and 3,6-diaryl-1,2,4,5-tetrazines affords C62. The C62 has the structure in which a four-membered ring is surrounded by four six-membered rings.

A C62 derivative [C62(C6H4-4-Me)2] synthesized from C60 and 3,6-bis(4-methylphenyl)-3,6-dihydro-1,2,4,5-tetrazine

The C60 molecules can also be coupled through a [2+2] cycloaddition, giving the dumbbell-shaped compound C120. The coupling is achieved by high-speed vibrating milling of C60 with a catalytic amount of KCN. The reaction is reversible as C120 dissociates back to two C60 molecules when heated at 450 K (177 °C; 350 °F). Under high pressure and temperature, repeated [2+2] cycloaddition between C60 results in a polymerized fullerene chains and networks. These polymers remain stable at ambient pressure and temperature once formed, and have remarkably interesting electronic and magnetic properties, such as being ferromagnetic above room temperature.[56]

Free radical reactions

Reactions of C60 with free radicals readily occur. When C60 is mixed with a disulfide RSSR, the radical C60SR• forms spontaneously upon irradiation of the mixture.

Stability of the radical species C60Y• depends largely on steric factors of Y. When tert-butyl halide is photolyzed and allowed to react with C60, a reversible inter-cage C–C bond is formed:[56]

Cyclopropanation (Bingel reaction)

Cyclopropanation (the Bingel reaction) is another common method for functionalizing C60. Cyclopropanation of C60 mostly occurs at the junction of 2 hexagons due to steric factors.

The first cyclopropanation was carried out by treating the β-bromomalonate with C60 in the presence of a base. Cyclopropanation also occur readily with diazomethanes. For example, diphenyldiazomethane reacts readily with C60 to give the compound C61Ph2.[56] Phenyl-C61-butyric acid methyl ester derivative prepared through cyclopropanation has been studied for use in organic solar cells.

Redox reactions – C60 anions and cations

The LUMO in C60 is triply degenerate, with the HOMO–LUMO separation relatively small. This small gap suggests that reduction of C60 should occur at mild potentials leading to fulleride anions, [C60]n− (n = 1–6). The midpoint potentials of 1-electron reduction of buckminsterfullerene and its anions is given in the table below:

Reduction potential of C60 at 213 K
Half-reaction E° (V)
C60 + e− ⇌ C−
60		 −0.169
C−
60 + e− ⇌ C2−
60		 −0.599
C2−
60 + e− ⇌ C3−
60		 −1.129
C3−
60 + e− ⇌ C4−
60		 −1.579
C4−
60 + e− ⇌ C5−
60		 −2.069
C5−
60 + e− ⇌ C6−
60		 −2.479

C60 forms a variety of charge-transfer complexes, for example with tetrakis(dimethylamino)ethylene:

C60 + C2(NMe2)4 → [C2(NMe2)4]+[C60]−

This salt exhibits ferromagnetism at 16 K.

The paramagnetic fulleride ion [C60]2− has been isolated as the [K(crypt-222)]+ salt. It is synthesized by treating C60 with metallic potassium in the presence of 2.2.2-cryptand. The most common fulleride ion, however, is [C60]3−. Alkali metal salts of this trianion are superconducting. In M3C60 (M = Na, K, Rb), the M+ ions occupy the interstitial holes in a lattice composed of ccp lattice composed of nearly spherical C60 anions. In Cs3C60, the cages are arranged in a bcc lattice.

Critical temperatures (Tc) of the fulleride salts M3C60
Salt Tc (K)
Na3C60 (non-superconducting)
K3C60 18
Rb3C60 28
Cs3C60 40

C60 oxidizes with difficulty. Three reversible oxidation processes have been observed by using cyclic voltammetry with ultra-dry methylene chloride and a supporting electrolyte with extremely high oxidation resistance and low nucleophilicity, such as [nBu4N] [AsF6].[56]

Reduction potentials of C60 oxidation at low temperatures
Half-reaction E° (V)
C60 ⇌ C+
60		 +1.27
C+
60 ⇌ C2+
60		 +1.71
C2+
60 ⇌ C3+
60		 +2.14

Which the [C60]2+ ion is very unstable, and the third process can be studied only at low temperatures.

The redox potentials of C60 can be modified supramolecularly. A dibenzo-18-crown-6 derivative of C60 has been made, featuring a voltage sensor device, with the reversible binding of K+ ion causing an anodic shift of 90mV of the first C60 reduction.

Metal complexes

Main article: Fullerene ligand

C60 forms complexes akin to the more common alkenes. Complexes have been reported molybdenum, tungsten, platinum, palladium, iridium, and titanium. The pentacarbonyl species are produced by photochemical reactions.

M(CO)6 + C60 → M(η2-C60)(CO)5 + CO (M = Mo, W)

In the case of platinum complex, the labile ethylene ligand is the leaving group in a thermal reaction:

Pt(η2-C2H4)(PPh3)2 + C60 → Pt(η2-C60)(PPh3)2 + C2H4

Titanocene complexes have also been reported:

(η5-Cp)2Ti(η2-(CH3)3SiC≡CSi(CH3)3) + C60 → (η5-Cp)2Ti(η2-C60) + (CH3)3SiC≡CSi(CH3)3

Coordinatively unsaturated precursors, such as Vaska's complex, for adducts with C60:

trans-Ir(CO)Cl(PPh3)2 + C60 → Ir(CO)Cl(η2-C60)(PPh3)2

One such iridium complex, [Ir(η2-C60)(CO)Cl(Ph2CH2C6H4OCH2Ph)2] has been prepared where the metal center projects two electron-rich 'arms' that embrace the C60 guest.[58]

Endohedral fullerenes

Main articles: Endohedral fullerene and Endohedral hydrogen fullerene

Metal atoms or certain small molecules such as H2 and noble gas can be encapsulated inside the C60 cage. These endohedral fullerenes are usually synthesized by doping in the metal atoms in an arc reactor or by laser evaporation. These methods gives low yields of endohedral fullerenes, and a better method involves the opening of the cage, packing in the atoms or molecules, and closing the opening using certain organic reactions. This method, however, is still immature and only a few species have been synthesized this way.[59]

Endohedral fullerenes show distinct and intriguing chemical properties that can be completely different from the encapsulated atom or molecule, as well as the fullerene itself. The encapsulated atoms have been shown to perform circular motions inside the C60 cage, and its motion has been followed by using NMR spectroscopy.[58]

Applications

No application of C60 has been commercialized. In the medical field, elements such as helium (that can be detected in minute quantities) can be used as chemical tracers in impregnated buckyballs.

Water-soluble derivatives of C60 were discovered to exert an inhibition on the three isoforms of nitric oxide synthase, with slightly different potencies.[60]

The optical absorption properties of C60 match solar spectrum in a way that suggests that C60-based films could be useful for photovoltaic applications. Because of its high electronic affinity [61] it is one of the most common electron acceptors used in donor/acceptor based solar cells. Conversion efficiencies up to 5.7% have been reported in C60–polymer cells.[62]

References

  1. ^ Eiji Ōsawa (2002). Perspectives of fullerene nanotechnology. Springer. pp. 275–. ISBN 978-0-7923-7174-8. Retrieved 26 December 2011.
  2. ^ Kroto, H. W.; Heath, J. R.; O'Brien, S. C.; Curl, R. F.; Smalley, R. E. (1985). "C60: Buckminsterfullerene". Nature. 318 (6042): 162–163. Bibcode:1985Natur.318..162K. doi:10.1038/318162a0.
  3. ^ Howard, Jack B.; McKinnon, J. Thomas; Makarovsky, Yakov; Lafleur, Arthur L.; Johnson, M. Elaine (1991). "Fullerenes C60 and C70 in flames". Nature. 352 (6331): 139–41. Bibcode:1991Natur.352..139H. doi:10.1038/352139a0. PMID 2067575.
  4. ^ Howard, J; Lafleur, A; Makarovsky, Y; Mitra, S; Pope, C; Yadav, T (1992). "Fullerenes synthesis in combustion". Carbon. 30 (8): 1183–1201. doi:10.1016/0008-6223(92)90061-Z.
  5. ^ Staff (22 February 2012). "Tiny 'Soccer Ball' Space Molecules Could Equal 10,000 Mount Everests". Space.com. Retrieved 23 February 2012.
  6. ^ Wave–particle duality
  7. ^ Arndt, Markus; Nairz, Olaf; Vos-Andreae, Julian; Keller, Claudia; Van Der Zouw, Gerbrand; Zeilinger, Anton (1999). "Wave–particle duality of C60". Nature. 401 (6754): 680–2. Bibcode:1999Natur.401..680A. doi:10.1038/44348. PMID 18494170.
  8. ^ The AZo Journal of Materials Online. AZoM™.com. "Buckminsterfullerene." 2006. Retrieved Jan 4. 2011.
  9. ^ Saffaro, L. (1992). "Cosmoids, Fullerenes and continuous polygons". In Taliani, C.; Ruani, G.; Zamboni, R. (eds.). Proceedings of the First Italian Workshop on Fullerenes: States and Perspectives. Vol. 2. Singapore: World Scientific. p. 55. ISBN 9810210825.
  10. ^ Durer, A. (1471–1528). "German artist who made an early model of a regular truncated icosahedron".
  11. ^ a b c d Dresselhaus, M. S.; Dresselhaus, G.; Eklund, P. C. (1996). Science of fullerenes and carbon nanotubes. San Diego, CA: Academic Press. ISBN 012-221820-5.
  12. ^ a b c Katz, 363
  13. ^ Osawa, E. (1970). Kagaku (Kyoto) (in Japanese). 25: 854
  14. ^ Katz, 368
  15. ^ Herbig, E. (1975). "The diffuse interstellar bands. IV - the region 4400-6850 A". Astrophys. J. 196: 129. Bibcode:1975ApJ...196..129H. doi:10.1086/153400.
  16. ^ Leger, A.; d'Hendecourt, L.; Verstraete, L.; Schmidt, W. (1988). "Remarkable candidates for the carrier of the diffuse interstellar bands: C60+ and other polyhedral carbon ions". Astron. Astrophys. 203: 145. Bibcode:1988A&A...203..145L.
  17. ^ Dietz, T. G.; Duncan, M. A.; Powers, D. E.; Smalley, R. E. (1981). "Laser production of supersonic metal cluster beams". J. Chem. Phys. 74 (11): 6511. Bibcode:1981JChPh..74.6511D. doi:10.1063/1.440991.
  18. ^ a b Kroto, H. W.; Health, J. R.; O'Brien, S. C.; Curl, R. F.; Smalley, R. E. (1985). "C60: Buckminsterfullerene". Nature. 318 (6042). London: 162–163. Bibcode:1985Natur.318..162K. doi:10.1038/318162a0.
  19. ^ Conference proceedings of "Dusty Objects in the Universe", page 89–93, "Search for the UV and IR spectra of C60 in laboratory-produced carbon dust"
  20. ^ The infrared and ultraviolet absorption spectra of laboratory-produced carbon dust: evidence for the presence of the C60 molecule
  21. ^ a b c Buckminsterfullerene, C60. University of Bristol. Chm.bris.ac.uk (1996-10-13). Retrieved on 2011-12-25.
  22. ^ Solid C60 – a new form of carbon.
  23. ^ Katz, 369–370
  24. ^ Shriver and Atkins. Inorganic Chemistry (Fifth Edition). W. H. Freeman and Company, New York, 2010, pp 356.
  25. ^ Properties of Buckminsterfullerene. Ming Kai College, Hong Kong
  26. ^ Baati, Tarek; Moussa, Fathi (June 2012). "The prolongation of the lifespan of rats by repeated oral administration of [60]fullerene". Biomaterials. 33 (19): 4936–4946. doi:10.1016/j.biomaterials.2012.03.036. PMID 22498298.
  27. ^ Moussa, Loera (Director) (8 October 2012). Full Interview With Professor Fathi Moussa (Television production). Paris: Loera, C60.NET.
  28. ^ Katz, 364
  29. ^ A. Karton; B. Chan; K. Raghavachari; L. Radom (2013). "Evaluation of the heats of formation of corannulene and C60 by means of high-level theoretical procedures". Journal of Physical Chemistry A. 117 (8): 1834–1842. doi:10.1021/jp312585r. {{cite journal}}: Unknown parameter |last-author-amp= ignored (|name-list-style= suggested) (help)
  30. ^ Buckminsterfullerene and Buckyballs – Definition, Discovery, Structure, Production, Properties and A. AZoM.com. July 15, 2006
  31. ^ Katz, 374
  32. ^ Beck, Mihály T.; Mándi, Géza (1997). "Solubility of C60". Fullerenes, Nanotubes and Carbon Nanostructures. 5 (2): 291–310. doi:10.1080/15363839708011993.
  33. ^ Bezmel'nitsyn, V.N.; Eletskii, A.V.; Okun', M.V. (1998). "Fullerenes in solutions". Physics-Uspekhi. 41 (11): 1091–1114. Bibcode:1998PhyU...41.1091B. doi:10.1070/PU1998v041n11ABEH000502.
  34. ^ Ruoff, R. S.; Tse, Doris S.; Malhotra, Ripudaman; Lorents, Donald C. (1993). "Solubility of fullerene (C60) in a variety of solvents". Journal of Physical Chemistry. 97 (13): 3379–3383. doi:10.1021/j100115a049.
  35. ^ M. S. Dresselhaus; G. Dresselhaus; P. C. Eklund (20 February 1996). Science of fullerenes and carbon nanotubes. Academic Press. pp. 437–. ISBN 978-0-12-221820-0. Retrieved 26 December 2011.
  36. ^ Talyzin, A.V. (1997). "Phase Transition C60−C60*4C6H6 in Liquid Benzene". Journal of Physical Chemistry B. 101 (47): 9679–9681. doi:10.1021/jp9720303.
  37. ^ Talyzin, A.V.; Engström, I. (1998). "C70 in Benzene, Hexane, and Toluene Solutions". Journal of Physical Chemistry B. 102 (34): 6477–6481. doi:10.1021/jp9815255.
  38. ^ a b Katz, 372
  39. ^ Katz, 361
  40. ^ Katz, 379
  41. ^ Katz, 381
  42. ^ Haddon, R. C.; Hebard, A. F.; Rosseinsky, M. J.; Murphy, D. W.; Duclos, S. J.; Lyons, K. B.; Miller, B.; Rosamilia, J. M.; Fleming, R. M.; Kortan, A. R.; Glarum, S. H.; Makhija, A. V.; Muller, A. J.; Eick, R. H.; Zahurak, S. M.; Tycko, R.; Dabbagh, G.; Thiel, F. A. (1991). "Conducting films of C60 and C70 by alkali-metal doping". Nature. 350 (6316): 320–322. Bibcode:1991Natur.350..320H. doi:10.1038/350320a0.
  43. ^ a b Gunnarsson, O. (1997). "Superconductivity in fullerides". Reviews of Modern Physics. 69 (2): 575–606. arXiv:cond-mat/9611150. Bibcode:1997RvMP...69..575G. doi:10.1103/RevModPhys.69.575.
  44. ^ Hebard, A. F.; Rosseinsky, M. J.; Haddon, R. C.; Murphy, D. W.; Glarum, S. H.; Palstra, T. T. M.; Ramirez, A. P.; Kortan, A. R. (1991). "Superconductivity at 18 K in potassium-doped C60". Nature. 350 (6319): 600–601. Bibcode:1991Natur.350..600H. doi:10.1038/350600a0.
  45. ^ Rosseinsky, M.; Ramirez, A.; Glarum, S.; Murphy, D.; Haddon, R.; Hebard, A.; Palstra, T.; Kortan, A.; Zahurak, S.; Makhija, A. (1991). "Superconductivity at 28 K in RbxC60". Physical Review Letters. 66 (21): 2830–2832. Bibcode:1991PhRvL..66.2830R. doi:10.1103/PhysRevLett.66.2830. PMID 10043627.
  46. ^ Chen, C.-C.; Kelty, S. P.; Lieber, C. M. (1991). "(RbxK1−x)3C60 Superconductors: Formation of a Continuous Series of Solid Solutions". Science. 253 (5022): 886–8. Bibcode:1991Sci...253..886C. doi:10.1126/science.253.5022.886. PMID 17751824.
  47. ^ Zhou, O.; Zhu, Q.; Fischer, J. E.; Coustel, N.; Vaughan, G. B. M.; Heiney, P. A.; McCauley, J. P.; Smith, A. B. (1992). "Compressibility of M3C60 Fullerene Superconductors: Relation Between Tc and Lattice Parameter". Science. 255 (5046): 833–5. Bibcode:1992Sci...255..833Z. doi:10.1126/science.255.5046.833. PMID 17756430.
  48. ^ Brown, Craig; Takenobu, Taishi; Kordatos, Konstantinos; Prassides, Kosmas; Iwasa, Yoshihiro; Tanigaki, Katsumi (1999). "Pressure dependence of superconductivity in the Na2Rb0.5Cs0.5C60 fulleride". Physical Review B. 59 (6): 4439–4444. Bibcode:1999PhRvB..59.4439B. doi:10.1103/PhysRevB.59.4439.
  49. ^ a b Ganin, Alexey Y.; Takabayashi, Yasuhiro; Khimyak, Yaroslav Z.; Margadonna, Serena; Tamai, Anna; Rosseinsky, Matthew J.; Prassides, Kosmas (2008). "Bulk superconductivity at 38 K in a molecular system". Nature Materials. 7 (5): 367–71. Bibcode:2008NatMa...7..367G. doi:10.1038/nmat2179. PMID 18425134.
  50. ^ Tanigaki, K.; Ebbesen, T. W.; Saito, S.; Mizuki, J.; Tsai, J. S.; Kubo, Y.; Kuroshima, S. (1991). "Superconductivity at 33 K in CsxRbyC60". Nature. 352 (6332): 222–223. Bibcode:1991Natur.352..222T. doi:10.1038/352222a0.
  51. ^ a b Iwasa, Y; Takenobu, T (2003). "Superconductivity, Mott Hubbard states, and molecular orbital order in intercalated fullerides". Journal of Physics: Condensed Matter. 15 (13): R495. Bibcode:2003JPCM...15R.495I. doi:10.1088/0953-8984/15/13/202.
  52. ^ Erwin, Steven; Pederson, Mark (1991). "Electronic structure of crystalline K6C60". Physical Review Letters. 67 (12): 1610–1613. Bibcode:1991PhRvL..67.1610E. doi:10.1103/PhysRevLett.67.1610.
  53. ^ Erwin, Steven; Pederson, Mark (1993). "Electronic structure of superconducting Ba6C60". Physical Review B. 47 (21): 14657–14660. arXiv:cond-mat/9301006. Bibcode:1993PhRvB..4714657E. doi:10.1103/PhysRevB.47.14657.
  54. ^ Han, J.; Gunnarsson, O.; Crespi, V. (2003). "Strong Superconductivity with Local Jahn–Teller Phonons in C60 Solids". Physical Review Letters. 90 (16): 167006. Bibcode:2003PhRvL..90p7006H. doi:10.1103/PhysRevLett.90.167006. PMID 12731998.
  55. ^ Capone, M.; Fabrizio, M; Castellani, C; Tosatti, E (2002). "Strongly Correlated Superconductivity". Science. 296 (5577): 2364–6. arXiv:cond-mat/0207058. Bibcode:2002Sci...296.2364C. doi:10.1126/science.1071122. PMID 12089436.
  56. ^ a b c d e f g Catherine E. Housecroft; Alan G. Sharpe (2008). "Chapter 14: The group 14 elements". Inorganic Chemistry (3rd ed.). Pearson. ISBN 978-0-13-175553-6.
  57. ^ Zhao, Yufeng; Kim, Yong-Hyun; Dillon, A. C.; Heben, M. J.; Zhang, S. B. (22 April 2005). "Hydrogen Storage in Novel Organometallic Buckyballs" (PDF). Physical Review Letters. 94 (15): 155504. Bibcode:2005PhRvL..94o5504Z. doi:10.1103/PhysRevLett.94.155504. PMID 15904160. Retrieved 24 September 2012.
  58. ^ a b Jonathan W. Steed; Jerry L. Atwood (2009). Supramolecular Chemistry (2nd ed.). Wiley. ISBN 978-0-470-51233-3. {{cite book}}: Unknown parameter |lastauthoramp= ignored (|name-list-style= suggested) (help)
  59. ^ Antonio Rodríguez-Fortea, Alan L. Balch, Josep M. Poblet "Endohedral metallofullerenes: a unique host–guest association" Chem. Soc. Rev., 2011, vol. 40, pp. 3551–3563. doi:10.1039/C0CS00225A
  60. ^ Alexandru D.P. Papoiu: Inhibition of nitric oxide synthase by water-soluble derivatives of C60. PhD dissertation, Rutgers University, 2004 https://catalog.libraries.rutgers.edu/vufind/Record/5055711
  61. ^ Ryuichi, Mitsumoto (1998). "Electronic Structures and Chemical Bonding of Fluorinated Fullerenes Studied". J. Phys. Chem. A. 102 (3): 552–560. doi:10.1021/jp972863t.
  62. ^ Katz, 385 ff.

Bibliography

Further reading

Retrieved from "https://en.wikipedia.org/w/index.php?title=Buckminsterfullerene&oldid=771190207"