Nissan Bluebird
Nissan Bluebird | |
---|---|
![]() Nissan Bluebird (U14) | |
Overview | |
Manufacturer | Nissan |
Production | 1957–2001 |
Body and chassis | |
Class | Mid-size car |
Body style | 2-door coupe 4-door hardtop/sedan/wagon |
Chronology | |
Successor | Nissan Primera (Europe) Nissan Pintara (Australia) Nissan Teana (Asia) Nissan Altima (Americas) |
The Nissan Bluebird is a medium-sized car launched in 1957. It has been Nissan's most internationally recognized sedan, in multiple body styles, and is known for its dependability and durability. The Bluebird's traditional competitor was the Toyota Corona from almost the very beginning of the product line. The Bluebird was originally developed to compete with the Corona, as the Corona was developed to continue offering a sedan used as a taxi since Toyota Crown was growing in size. Every generation of the Bluebird has been available as a taxi, duties that are shared with base level Nissan Cedrics.
It is one of the longest-running nameplates from a Japanese automaker. It spawned the 160J/710/Violet/Auster/Stanza line.
Export and foreign-built model names
Export versions were sold variously as the Datsun 510, Datsun 180B (with 160B and 200B versions) and the Datsun Bluebird. The Nissan Bluebird nameplate began appearing around 1982 as the Datsun marque was phased out in favour of Nissan.
From 1981 to 1985, Australia followed the Japanese convention by calling its car the Bluebird, and had a unique, facelifted rear-wheel-drive version for 1984 and 1985. That car was replaced in 1986 by the Nissan Pintara. It would be replaced by the successive Bluebird, also called Pintara, until 1992; then the range was brought in line with the Japanese model, for the U13 series from 1993 to 1997. In an unusual twist, brought about under the short lived Button Plan, the Pintara was also rebadged for Ford Australia as the Ford Corsair, reviving a Ford UK nameplate last used in the 1960s.
In the United States, the Bluebird was eventually sold as the Nissan Stanza. In 1992, the Stanza became the Nissan Altima. Currently, the Bluebird is not sold in North America; in 1998, the Altima was completely redesigned, becoming a model unique to the North American market.
The Bluebird sold in Europe between 1986 and 1990 was in fact a rebadged Nissan Auster—this was replaced by the Primera in Nissan's European line-up in 1990.
A six-cylinder version called the Maxima was released in the 1980s and became a separate model.
Historic vehicles
Datsun Type 11 | |
---|---|
Overview | |
Manufacturer | Datsun/Nissan |
Also called | Datsun Road Star |
Production |
|
Assembly | Japan: Yokohama Plant, Kanagawa-ku, Yokohama |
Designer | Noriyoshi Gotoh |
Body and chassis | |
Body style | phaeton, roadster, coupe, sedan, van |
Layout | FR layout |
Powertrain | |
Engine | 495 cc DAT side-valve I4 |
Transmission | 3 speed manual |
Dimensions | |
Wheelbase | 1,880 mm (74.0 in) |
Length | 2,710 mm (106.7 in) |
Width | 1,175 mm (46.3 in) |
Curb weight | 2,355 lb (1,068 kg) |
Chronology | |
Predecessor | Datson Type 10 |
Successor | Datsun Type 12 |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/42/Datsun_16_Sedan_1937.jpg/220px-Datsun_16_Sedan_1937.jpg)
Datsun Type 11
The 1932 Datsun Type 11 was a small car with a 495 cc, 10 HP side valve engine and a three speed transmission. [JSAE]. It was offered in several body styles, and DAT/Nissan sold 150 of the Type 11 in 1932. [JSAE] The Type 11 was only produced during the year 1932, as changes in the law allowed Nissan to sell a new model with a larger engine in 1933.
The DAT corporation had been producing cars since 1914 [Togo, pg. 11], but through the 1920s, much of their profitability depended on government subsidies of their large trucks [Togo, pg. 8]. A 1930 ministerial ordinance by the Japanese government declared that drivers' licenses would not be required for cars with engines up to 500 cc displacement, and that the purchase of these vehicles would be taxed at a lower rate. [Togo, pg. 12] DAT began to produce a small car for this market. The new car was called "Datson" (i.e. "Son of DAT")[1] and later "Datsun" to distinguish it from the full sized trucks and cars the company had produced in the past.
The Datsun Type 11 had the same engine displacement and external dimensions as an Austin Seven, and information about the British car was widely available within Japan. In October and November 1929, the chief engineer of Austin presented a paper in Tokyo called "The British Light Car". This paper is supposed to have provided detailed explanations and illustrations of many of the mechanical components of the Austin Seven.[1] The exact relationship between the two cars is, however, in dispute. Some authors say that it was a licensed copy of the Seven.Adrian Room Others insist it was a copy, but not an authorized one.Mills, Rinsey Herbert Austin was definitely concerned about the possibility of the Datsun infringing on his patents; he subsequently imported a 1935 Datsun to examine, but decided not to file a complaint. Some websites have pointed to this as evidence supporting the hypothesis that the Datsun was not a copy of the Austin.motorsnippets Other websites have pointed out that the decision to not press charges might have been because that by then the Datsun designs had begun to differ from those of the Austin.Rat Dat
Datsun Type 12
Datsun Type 12 | |
---|---|
Overview | |
Production |
|
Assembly |
|
Body and chassis | |
Body style | Phaeton, roadster, sedan |
Layout | FR layout |
Powertrain | |
Engine | 747 cc DAT side-valve I4 |
Transmission | 3-speed manual |
Dimensions | |
Wheelbase | 1,880 mm (74.0 in) |
Length | 2,710 mm (106.7 in) |
Width | 1,175 mm (46.3 in) |
Curb weight | 400 kg (882 lb) |
Chronology | |
Predecessor | Datsun Type 11 |
Successor | Datsun Type 13 |
The 1933 Datsun Type 12 was a small car produced by the Nissan corporation. The name Datsun was used by DAT for their line of small cars. After the DAT corporation was absorbed into Nissan, these cars continued to be produced, and the original model name was maintained. The Type 12 was basically similar to the earlier 1932 Type 11, but had a larger engine.
Japanese laws at that time did not require a license to drive automobiles with small-displacement engines. DAT/Nissan produced the Datsun Type 11 as their entry into this market. The original limitation for this class of vehicles was 500 cc displacement engines, but that was changed to 750 cc in 1933. Nissan responded to this change by producing a larger engine, and gave the more powerful car a new name, the Type 12.
Datsun 110 series
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/75/1956_Datsun_Model_112_01.jpg/220px-1956_Datsun_Model_112_01.jpg)
The first post-war four door sedan built by Nissan was called the Datsun 110 series. This model also bore the Convar model name in marketing. It was introduced to Japan within a month of the introduction of the Toyota Crown RS series, and was smaller than the Prince Sedan introduced earlier in 1952 and the Subaru 1500 introduced in 1955. Sedans built in Japan during the 1950s were introduced to serve as taxis, and introduced mass production vehicles, as opposed to earlier vehicles made using a slower hand-made process.
The Datsun 110 series used the Nissan D10 type engine based on an original (albeit Austin inspired) design from before World War II. The engine is a water-cooled inline-four cylinder with two crankshaft bearings, side intake and exhaust valves, a displacement of 860cc and with 25 PS (18 kW) 4000 rpm. Aside from not using the name, the A110 is the direct forerunner of the modern Bluebird line. Incremental changes were denoted by 112 and 113 codes – the 111 designation was skipped. The last model, introduced in June 1956, received an all-new, developed in-house gearbox. The earlier 110 and 112 had been using the four-speed, floor-mounted transmission from the Austin A40 Somerset (then built under license by Nissan), but the new 113 received a column-shifted four-speed unit which narrowly allowed seating for three in front. The new unit was also 10 kilograms (22 lb) lighter than the Austin one.[2] Both units received synchronization on the top three gears only, as was the norm for the time.
The 110 series was available as a sedan or as the rare W110/112/113 station wagon, which had a horizontally split tail gate. There was also a K110 listed, a two-door cabrio coach version. Based on the 110 was the stronger duty 120 series (intended for commercial usage), also available as a two-door delivery van, as a double cab truck, or as a two-seater pickup truck – part of the Datsun truck lineage. The 110 series' body was manufactured by Nissan Motor Kantō, using steel from Mitsubishi Heavy Industries.
Datsun 210/211 series
Datsun 1000 (210) | |
---|---|
Overview | |
Production | October 1957 – July 1959 |
Assembly | Japan: Nissan Shatai, Hiratsuka, Kanagawa |
Body and chassis | |
Class | compact |
Body style |
|
Layout | FR layout |
Related | Datsun Sports S211 Datsun Truck 220 |
Powertrain | |
Engine | |
Transmission | 4-speed manual |
Dimensions | |
Wheelbase | 2,220 mm (87 in) |
Length | 3,860 mm (152 in) |
Width | 1,466 mm (57.7 in) |
Height | 1,535 mm (60.4 in) |
Curb weight | 925 kg (2,039 lb) max |
Although Nissan's own materials indicate that the Bluebird name emerged in 1959, some records show that the name first adorned a 988 cc, 34 PS (25 kW) four-door sedan in 1957, which was part of the company's 110/210 series. Its engine was based on an Austin design, as Nissan had been building the Austin A50 Cambridge under licence in the 1950s.
The 210 was known for doubling Nissan's production at the time and was the first Nissan to be exported to the United States. In some markets, this model was exported as the Datsun 1000. It was the first passenger car to be built in Taiwan, by the fledgling Yue Loong works, as the 1960 YLN 701 Bluebird.[3]
The 210 established an early reputation for reliability, with two of them winning the 1000 cc class in the 1958 Australia Mobilgas Rally.
The 210 had succeeded the similar 110 series, sold as a two- and four-door sedan and offered from 1955 to 1957. The Datsun 114 was introduced in October 1957 as a low cost option to the 210 (the 114 used the 210's body except for the grille and exterior trim combined with the old 25 PS "D10" engine). Another low cost alternative was the Datsun 115 (lower specification version of the 211) and was similar to the 114 with the exception of a bigger rear window and slightly redesigned front turn signals. The same engine was used, but thanks to some improvements it now produced 27 PS (20 kW) and was called the "B-1" engine instead.[4] Small engine displacements were used to keep the vehicle affordable, as the Japanese Government began to impose an annual road tax to help develop and maintain a national transportation infrastructure in 1950.
Subsequent models included the 211 (October 1958) which featured cosmetic changes, including twin taillights, a larger rear window, and chrome trim that extended to the rear fender. Power was increased somewhat, now up to 37 PS (27 kW) at 4600 rpm. For export markets, mainly the United States and Australia, there was also a bigger engined version available. "P211" in internal parlance, it was marketed simply as the "Datsun 1200". It has the "E" engine which produces 48 PS (35 kW) at 4800 rpm. There was also the 220-series of small trucks based on the 210.
![]() |
310/311/312 series
310 | |
---|---|
Overview | |
Also called |
|
Production | August 1959–1963 |
Assembly | Japan: Nissan Shatai, Hiratsuka, Kanagawa New Zealand: Auckland |
Body and chassis | |
Body style |
|
Layout | FR layout |
Related | Datsun Truck 320 Datsun Fairlady SP310 Nissan Cedric 30 Nissan Silvia CSP311 |
Powertrain | |
Engine | |
Transmission | 3-speed manual (fully synchronized for 1961) |
Dimensions | |
Wheelbase | 2,280 mm (90 in) |
Length | 3,915 mm (154.1 in) |
Width | 1,496 mm (58.9 in) |
Height | 1,470 mm (58 in) |
Curb weight | 900 kg (2,000 lb) |
The Datsun Bluebird which debuted in August 1959 was an all-new car, and was available in Japan at the dealership sales channel Nissan Bluebird Store. The 310 series had a 1 L engine from the 210 model. The 310 was built from 1960–1963. There were three models built: 310 (1960), 311 (1961), and 312 (1962–1963). In Taiwan it also replaced the 701 and was known as Yue Loong Bluebird 704. The Datsun 312 was also sold in Korea. The 310 series was also built in South Africa at a factory in Rosslyn Pretoria in CKD form during 1962 and 1963. The model was also sold in New Zealand and was one of the first Japanese models available there, beginning in May 1962.[5]
In July 1960, a five-door station wagon was added (WP310). The P310 was powered by the 1.2L Nissan E engine. A smaller engine version (simply called "310") was powered by the 1.0L Nissan C engine. The P311 and P312 (powered by the 60 hp 1.2L Nissan E-1 engine) also had smaller engined versions ("311" and "312") that were powered by the 45 hp 1.0L Nissan C-1 engine. The 310 and 311 were equipped with a 3-speed manual transmission (fully synchronized for the 311 and 312). The station wagon was also available for the 311 and 312. The 312 was also available in a deluxe version (DP312). A trim model called the "Fancy Deluxe" (model code DP312-L) was marketed for the female driver; it featured a pale yellow exterior, pale yellow/grey interior, high heel shoe holder under the dash, a vanity mirror on the back of the driver's side sun visor, a turn signal relay that played music, curtains, automatic clutch, and bigger mirrors. By February 1961, a 1.2 L overhead-valve engine (codenamed E-1) became an option on a higher-trim DX model.
Styling tended to mimic larger American cars. A very small number did make it to the United States. This generation of Bluebird became one of the first Japanese cars to be sold in significant numbers in Europe, after Finland fully opened its doors to automobile imports in mid-1962. 700 were brought in, and by the time the 410-series had arrived, Datsun had passed SAAB and Triumph in registrations. Although not very fast, the sturdy Datsun was well-suited to the rugged Finnish roads of the time.[6]
-
Datsun Bluebird sedan (310)
-
Datsun Bluebird station wagon (WP312)
410/411 series
Datsun Bluebird 410 | |
---|---|
![]() | |
Overview | |
Also called | Tan Chong 410 Yue Loong YLN-705B |
Production | September 1963–1967 |
Assembly |
|
Body and chassis | |
Body style |
|
Layout | FR layout |
Powertrain | |
Engine | |
Transmission |
|
Dimensions | |
Wheelbase | 2,380 mm (94 in) |
Length | 3,995 mm (157.3 in) |
Width | 1,490 mm (59 in) |
Height | 1,415 mm (55.7 in) |
Curb weight | 915 kg (2,017 lb) |
In September 1963, Nissan brought the Bluebird up-to-date with boxier styling (by Pininfarina), resembling European designs, particularly the Lancia Fulvia. The 410 was built from 1964–1967. The appearance appears to have had an influence on Nissan's first V8-powered Nissan President in 1965, and the Nissan Sunny in 1966.
This generation Bluebird was introduced in time for the 1964 Summer Olympics as Nissan wanted to offer an all new, modern appearance in time for the games.
Two basic models were built: 410 (1964–1965) with a combination rear lamp set consisting of round and rectangular lenses, and 411 (1965–1967), which featured the same combination rear lamp set as the earlier 410 through 1966, changing to higher mounted rectangular tail light sets for 1967. On both, the rear direction indicators were red or amber, according to market – New Zealand, which allows either, took the 410 with both and the 411 with red only. This Bluebird was one of the first Japanese car lines assembled in New Zealand, initially imported under a tariff/duty arrangement allowing 300 cars a year (the so-called '300 Club') with CKD kits built up by Motor Holdings at Mount Wellington in Auckland. The 410 series sedan and station wagon plus a light delivery van was assembled in South Africa at a factory in Rosslyn Pretoria. These cars were all in CKD format.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b7/Datsun_Bluebird_410_rear.jpg/220px-Datsun_Bluebird_410_rear.jpg)
A sporting model, the Bluebird SS, was launched in Japan in March 1964, with a tuned 1.2 L engine. The SS was originally available only in a four-door configuration (MTK), but a two-door (RTK) joined about a year later. Two versions of the SS were built: the DP410-MTK/RTK and the DP411-MTK/RTK. The DP410 was powered by a 71 hp (53 kW) version of the 1.2 L Nissan E-1 engine. The 78 PS (57 kW) double-carburetted version of the J13 powered the DP411. All SS models were equipped with a four-speed manual transmission.
Initially, only a four-door sedan and five-door station wagon were in the range, but a two-door was added in September 1964. The two-door SS was launched in February 1965. The 410 and 411 were also available in a deluxe version (DP410 and DP411). A "Fancy Deluxe" version was also available in the home market. A DP411 SSS was entered in motor sport by the Datsun factory in South Africa and was used as test car for Nissan Japan. A Datsun DP411 SSS was also entered in the 1964 Monte Carlo rally, where it was driven by a South African called Ewold van Bergen.
To minimize production costs for export, the windshield wipers used a pattern where the wipers started in the center and wiped towards the edge of the windshield, instead of from the passenger side towards the driver.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/9/99/Datsun_1600_Wagon_%28410%29.jpg/220px-Datsun_1600_Wagon_%28410%29.jpg)
In May 1965 the base engine was enlarged to a downtuned version of the 1.3 L unit already used in the 411-series SS, now with a single (twin-barrel) carb and developing 67 PS (49 kW) at 5,200 rpm. The transmission remained a three-speed.[8] The SS was downtuned somewhat, now with 72 PS (53 kW) but still with the four-speed unit.[8] More excitingly, a twin-carb 1.6 L SSS model was launched the same month, with no less than 90 PS (66 kW).[9] This begat a line of famous Nissans in Japan, with the Bluebird SSS a mainstay of the range until its deletion in 2001.
As usual, a pickup truck version was developed and sold in parallel. For some reason it broke with the earlier standard of simply changing the second digit of the chassis code to a "2", instead labelling it the 520. The commercial-use 520 further marked the divergence of Datsun's Bluebird and truck lines as it continued to be available until 1972. Later versions received a modernized front end, similar to the contemporary 510 Bluebird.
In the United States, only the four-door sedan and wagon were offered; the two-door was never available. The 1.6 litre, featuring the same R16 engine as the SP(L)311 Roadster, was only available in 1967. The 1.2 and 1.3 410 and 411 series' had a manual gearbox, while the 1.6 litre was available as either a manual or automatic. The cars were labeled DATSUN, with no mention of Bluebird either on the car or in the owner's manual.
In Taiwan the Bluebird 410 was built and sold as the Yue Loong YLN-705B.
510 series
Datsun Bluebird 510 | |
---|---|
![]() | |
Overview | |
Also called | Datsun 510 Datsun 1600 Tan Chong 510 Yue Loong YLN-706 |
Production | 1967–1972 |
Assembly | Japan: Yokosuka, Kanagawa (Oppama plant) Australia: Clayton, Victoria[10][11][12] New Zealand: Thames |
Body and chassis | |
Body style | 2/4-door sedan 2-door coupé 5-door station wagon |
Layout | FR layout |
Related | Datsun Truck 520 |
Powertrain | |
Engine | 1.3 L L13 I4[13] 1.6 L L16 I4[13] |
Transmission | 4 speed manual all-synchromesh[14] |
Dimensions | |
Wheelbase | 2,416 mm (95.1 in)[13] |
Length | 4,120 mm (162.2 in)[13] |
Width | 1,560 mm (61.4 in)[13] |
Height | 1,402 mm (55.2 in)[13] |
Launched in August 1967, it was one of the most comprehensive Bluebird ranges in terms of body styles: a two-door sedan, a four-door sedan, a five-door station wagon, and a two-door coupé (added in November 1968). The "510" still enjoys considerable fame in the U.S.
Like its predecessors, the 510 Bluebird line was imported into New Zealand, this time as a single 1.6-litre, four-speed manual Deluxe model, assembled from CKD kits by Campbell Industries (later Toyota New Zealand Thames assembly plant). Local content included glass, radiator, upholstery, carpet, paint, wiring and numerous other items. A few automatic and twin carburettor SSS versions were imported built-up from Japan, primarily for buyers who had access to funds overseas and could utilise the country's 'no remittance' new car purchase scheme to avoid lengthy waiting lists.
The trim designation "SS" was changed to "SSS" as General Motors was already using the term for performance branded Chevrolet products called the Super Sport starting in 1961.
The P510 sedan and coupé were built in South Africa [Pretoria] from 1969 to 1974 and had the L16 engine, available as 1600 SSS (twin carbs) and as the single carbed 1600 DeLuxe. An automatic gearbox model was also available for the DeLuxe range. The factory also made two versions of the two-door coupé. They were a 1600GL and a 1800GL. The 1600GL had a single carburetor or twin carbs and 1800 cc cars had twin carbs. The 1600 SSS was also used in motorsport as test cars for Nissan Japan. The cars were used in numerous motorsport rallies by Ewold van Bergen from Pretoria, South Africa, who was a test engineer for Nissan Japan.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c6/1968_Datsun_Bluebird_wgn.jpg/220px-1968_Datsun_Bluebird_wgn.jpg)
610 series
610 | |
---|---|
![]() Inline-six Datsun Bluebird Coupé (G610) | |
Overview | |
Also called | Datsun 160B/180B Datsun 610[15] |
Production | 1971–1976 1972–1977 (Australia) |
Assembly | Japan: Yokosuka, Kanagawa (Oppama Plant) Australia: Clayton, Victoria[11][12] New Zealand: Thames (Campbell Industries); Porirua (Todd Motors) |
Body and chassis | |
Body style | 4-door sedan 2-door coupé 5-door station wagon |
Layout | FR layout |
Related | Datsun Truck 620 |
Powertrain | |
Engine | 1595 cc L16 I4 1770 cc L18 I4 1952 cc L20B I4 (U.S.)[16] 1998 cc L20/L20A I6 (G610) |
Transmission | 4-speed manual 5-speed manual 3-speed automatic |
Dimensions | |
Wheelbase |
|
Length |
|
Width | 1,600 mm (63 in) |
Height | 1,415 mm (55.7 in) |
Curb weight | 1,035 kg (2,282 lb) |
The 610 series was launched in Japan in August 1971 and was badged as the Datsun Bluebird-U. The meaning behind the U suffix is "User Oriented", to signify the higher comfort levels than what the 510 predecessor could muster.[17] A domestic advertising campaign used the catch-line "Bluebird U – Up You!", and was short-lived due to the innuendo. The 610 was one of the first Nissan products to adopt a popular styling appearance, called "coke bottle" which appeared internationally during the 1960s and 1970s, an appearance shared with the larger Nissan Cedric, as both vehicles were available at Japanese Nissan dealerships called Nissan Bluebird Store.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/ee/1972_Datsun_180B_%28P610%29_Deluxe_sedan_%2820651657636%29.jpg/220px-1972_Datsun_180B_%28P610%29_Deluxe_sedan_%2820651657636%29.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/19/1977_Datsun_180B_%2810899901566%29.jpg/220px-1977_Datsun_180B_%2810899901566%29.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/40/1974_Datsun_180B_%28P610%29_SSS_coupe_%2819055363101%29.jpg/220px-1974_Datsun_180B_%28P610%29_SSS_coupe_%2819055363101%29.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/9/9b/1976_Datsun_180B_%28P610%29_GL_sedan_%282011-01-05%29.jpg/220px-1976_Datsun_180B_%28P610%29_GL_sedan_%282011-01-05%29.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/e8/1975_Datsun_180B_%28P610%29_GX_station_wagon_%2825722031675%29.jpg/220px-1975_Datsun_180B_%28P610%29_GX_station_wagon_%2825722031675%29.jpg)
For the Japanese domestic market, the 610 was pitted against the second generation Toyota Corona Mark II. Also in Japan, the 610 was initially sold alongside the 510 but eventually replaced the 510. 610's were available as a four-door, two-door hardtop (HT), and a five-door wagon. Trim levels in Japan were GL (Grand Luxe), SSS (Super Sports Sedan), DX (Deluxe) or STD (Standard). It borrowed its suspension and drive train from the outgoing 510, with some modifications. Likewise, the 610 four-door and two-door retained the class-leading, independent rear trailing arm design, while the wagon reused the rear live axle with leaf springs from the 510 wagon.
Whether four or six-cylinder models, all 610's were equipped with Nissan's L-series inline engines. In many export markets, including UK, Europe, and Australia, the 610 was badged as the 160B or 180B with respect to particular engine displacement. The Bluebird name also often appeared in advertising and in brochures. In the UK the popularity of the 160B/180B/180B SSS Coupe range further strengthened Datsun's position as the leading Japanese importer. As a result of Japanese Government passage of emission control regulations, Nissan introduced their emissions technology in 1975, using a badge that said "Nissan NAPS" (Nissan Anti Pollution System) on vehicles thus equipped. Most 610s worldwide came equipped with either a four-speed manual or a three-speed automatic transmission, but a five-speed manual transmission was available in the Japanese and Australian markets.
As with the 510, the SSS trim included miscellaneous sport options and a higher output engine with twin-Hitachi carburetors. A Japan-only SSS-E model was equipped with Bosch electronic fuel injection, and so was one of the first, mass-produced Nissan vehicles to be sold without a carburetor. Another 610 never exported was the inline-six U-2000 GT and U-2000 GTX (nicknamed "shark-nose" in Japanese), which shows some visual similarities to the Pontiac GTO and Oldsmobile Cutlass. Called the G610, it came with a stretched front end to accommodate the longer engine and featured a different grill and other aesthetic modifications. This model was not available as a wagon. The most powerful GTX-E received fuel injection and 130 PS (96 kW).[18]
The 610 Bluebird received a facelift in 1974, with prominent turn signals mounted on the front corners and with a more squared off grille, along with other changes. This means that the 610 was available with three different front ends: original, facelift, and the "shark-nose" six-cylinder front. A minor upgrade to the front suspension (offset strut tops) for the 610 led to slightly improved handling before the introduction of the 810. Japanese market vehicles with engines identified as 2.0 litre obligated Japanese owners to pay more annual road tax, which added to their exclusivity.
- Australia
In Australia, Datsun released the locally-produced 180B in October 1972[19] as a four-door sedan in Deluxe and GL trims, and a two-door SSS coupe.[20] The engine fitted was the 1.8-liter L18 engine paired to a four-speed manual or three-speed automatic transmission; Datsun upgraded the SSS to a five-speed manual in 1975.[20] Over the base Deluxe, GL models added: vinyl roof, radio with separate speaker, upgraded interior upholstery and trim, cut-pile interior carpeting, chrome exhaust extension, rear mounted GL badge, and whitewall tyres.[21] In early 1974, wrap-around front indicators, new tail-lights and cabin trim changes heralded a range-wide facelift, while a fully imported (not locally manufactured) luxury GX sedan arrived in November 1974.[20] The GX model could only be differentiated on the exterior by its grille, wipers and badges, although the interior gained luxuries such as cloth inserts for the vinyl upholstery and a three-way adjustable driving seat (fore/aft, recline, thigh support).[22] A GX wagon followed in June 1975, followed by a minor trim and grille facelift in 1976.[20] The 180B proved popular right to its discontinuation in October 1977, when the P810 200B range arrived in Australia.[20]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f0/Datsun_610_%28US%29.jpg/220px-Datsun_610_%28US%29.jpg)
- North America
In the United States and Canada, the car was sold simply as the "Datsun 610". The four-door sedans, a two-door hardtop coupé, and a five-door station wagon were available. For 1973 and 1974, North America was the only market outside Japan to have its 610 HT models equipped with the unique, six-bulb tail lights that covered the entire rear panel, requiring the license plate to be mounted below the rear bumper. All 610's received the larger 2.0-liter L20B engine as did the Datsun 710, although with only 97 hp (72 kW) (SAE Net); this is less than what was claimed for a Japanese market 1.6.[16] California-spec cars have 94 hp (70 kW). The federal/Canadian version took leaded fuel and depended on an EGR system for pollution control, while the California cars have a catalytic converter and require unleaded gasoline. Gross horsepower ratings are 110 and 107 respectively.[23][24]
Until the 1977 introduction of the six-cylinder 810, the 610 was Datsun's largest car sold in North America.
- New Zealand
New Zealand market cars initially were a single 1.8-litre 180B sedan, again with four-speed manual transmission and assembled from CKD kits under contract by Campbell's. A three-speed automatic – using a transmission made by Nissan Japan subsidiary JATCO – was later added as a factory option. Relaxed restrictions on car assembly kit imports and increasing affluence in NZ meant Campbell's, which also assembled Toyota, Renault, Rambler, Hino, Isuzu and Peugeot models over the years, could not meet demand so Nissan-Datsun (NZ) contracted Chrysler/Mitsubishi importer Todd Motors to assemble additional manual 180Bs at its Porirua factory alongside the Chrysler Valiant, Hunter, Avenger and Alpine model ranges and Mitsubishi Lancer sedan and Colt Galant coupe. The Todd-built cars gave Datsun dealers a new range of paint colours all different from those Campbell's offered.
- Racing history
A 610 four-door participated in the 1972 and 1973 East African Safari Rally. Bob Sharp drove his 610 HT race car to second place overall in the American SCCA B Sedan Championship for 1973 and 1974. The same car achieved a first place for the 1976 SCCA B-Sedan Championship but with Elliot Forbes-Robinson driving.
710 series
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/7b/Nissan_Violet_710.jpg/220px-Nissan_Violet_710.jpg)
Shortly after the introduction of the 610, Nissan launched a new line of slightly smaller cars January 1973 utilizing parts and styling cues from the 610. This new line of cars was sold in various markets as the Datsun 140J/160J, Datsun Violet, or Datsun 710. In Japan, it was exclusive to Nissan Cherry Store Japanese dealerships as a larger companion to the smaller Nissan Cherry, thereby giving Nissan the opportunity to sell a Bluebird-sized vehicle at a different sales channel. The use of the 710 name was a source of confusion because it implied that the model was either a larger, upscale version of the 610 (it was the opposite) or a newer model in the Bluebird line. This car was also built in South Africa during 1973 to 1978 at the Rosslyn Datsun plant in the form of a 160U deluxe and SSS and 180U deluxe and SSS. As the Bluebirds traditional cross-town rival, the Toyota Corona split into a new model called the Toyota Carina, the Violet appeared just under three years after the Carina did.
810 series
810 | |
---|---|
1979 Datsun Bluebird 1.8 GL Sedan (810 series) | |
Overview | |
Also called | Datsun 160B[25] Datsun 180B[25] Datsun 200B[26] Datsun 810[27] |
Production | 1976–1979 |
Assembly | Japan: Oppama Plant, Yokosuka, Kanagawa Australia: Clayton, Victoria[27] |
Body and chassis | |
Body style | 4-door saloon/sedan 2-door coupé 5-door wagon/van |
Layout | FR layout |
Powertrain | |
Engine | |
Transmission | |
Dimensions | |
Wheelbase |
|
Length | 4,260 mm (167.7 in)[14] |
Width | 1,631 mm (64.2 in)[14] |
Height | 1,389 mm (54.7 in)[14] |
Curb weight | 1,084 kg (2,390 lb)[14] |
The 810 was introduced in July 1976. Engine options were carried over but a 1.4 L was reintroduced in August 1978. Styling was an evolution of the 610's, with slightly squared off features but retaining a slight "coke bottle" shape. No two-door sedan was available, but the four-door sedan, two-door hardtop coupé (SSS Coupe) and five-door station wagon were offered.
The Bluebird 810 was sold in export markets as the Datsun 160B, Datsun 180B, Datsun 200B and Datsun 810.[27] Australian magazine Wheels called the 200B 'a 180B with 20 more mistakes.' In Japan the range gradually received upgraded motors which could pass the 1978 emissions standards; these models carry 811 series chassis numbers, with Japanese market vehicles were installed with a NAPS badge on the rear deckled that identified emission control technology having been installed. This process began in October 1977 and continued until August 1978. This meant replacing the earlier L-series engines with the new crossflow Z engines, based on the L.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f4/810Bluebird2d.jpg/220px-810Bluebird2d.jpg)
In Japan there continued to be a six-cylinder version of the Bluebird available. As before, this received a longer wheelbase and nose, while retaining the rear end of the regular Bluebird range. In August 1978 the Bluebird G4 was introduced (PD811), a 1.8 litre four-cylinder model fitted with the long-nose bodywork.[28]
Europe (160B/180B)
At this time, with several UK auto-producers losing market share, Datsun had grabbed the headlines as the UK's leading car importer. The magazine Autocar road tested a 180B Bluebird and recorded a top speed of 101 mph (162 km/h) along with a 0–60 mph (0 – 96 km/h) time of 13.6 seconds.[14] The Datsun's overall fuel consumption for the test was 27.7 mpg (10.2 l/100 km).[14] For all three of these performance measurements, it was marginally better than the Ford Cortina 1600 GL which continued to dominate this sector in the UK, but both cars were beaten for speed and acceleration (though not for fuel economy) by the relatively crude Morris Marina 1.8HL.[14] It was probably more significant that the Bluebird had a manufacturer's recommended retail price, including sales taxes, of £2950 as against £3263 for the Ford and £3315 for the Morris.[14] The testers found the car matched the competition in most respects, though the brakes were criticised for being "not up to current standards".[14]
In Europe, the 160B claimed 81 PS (60 kW), while the larger-engined 180B had 88 PS (65 kW) to offer. The sporting SSS model had to make do with a very modest power increase; two more horsepower for 90 PS (66 kW).
Australia (200B)
Introduced in October 1977 in Australia,[29] the first 200B's were all fully imported in sedan, station wagon and coupe forms, the latter retaining the SSS badge. In January 1978 local assembly began for the sedan, followed shortly by the wagon. The sedan trim levels were GL and GX. While the coupe remained a hardtop, Datsun added an opera window in the rear pillar. The coupe was discontinued in Australia in 1979. The engine used is a larger version of the L series engine from the preceding 180B. Dubbed the L20B its capacity was increased to 1952 cc, making it good for 72 kW (97 hp).
Almost immediately the 200B became Australia's top selling four-cylinder car, a position it held until it was displaced by the Mitsubishi Sigma. Its popularity however remained strong right through the production run, family buyers appreciative of the plentiful interior room and standard features. It may have been somewhat conservatively styled, but the effort Nissan had put into the engineering of the car made it reliable and tough, qualities most Australians rated higher than a more advanced design.
Only the early fully imported 200B sedans and coupes retained the independent rear suspension from the 180B, locally assembled 200B sedans instead switched to coil springs with trailing arms, while the wagon had a live axle in the rear with leaf springs. Seen as a giant step backwards, the reason for the change was certainly not a cost-cutting measure, but simply the need for Nissan to reach an 85% local content quota that the then Federal Government demanded of Australian car manufacturers. However, in practice the live rear axle, being an Australian development, proved to actually benefit the car's overall handling dynamics.
The biggest downside to the 200B was the noise the driver would have to endure. The 2-litre overhead cam engine could be very loud when pushed up through the rev range, and to make matters worse there was always plenty of drive line vibration. These issues prompted an exhaustive correction programme to be undertaken by the parent company in Japan, and thankfully later models were somewhat improved.
A sportier version of the 200B sedan was released in June 1978. The new SX featured a revised grille, front spoiler, alloy wheels, revised door and seat trim (striped seat inserts) and tachometer, while the suspension was altered to improve handling. The colours available for this model were simply blue, white or red, and the only transmission available was a 4-speed floor shift. Significantly the SX was a unique model to Australia, the added input from Nissan's Australian design engineers signified a step away from just assembling cars. This in turn led to the locally built Datsuns, and later Nissans, being re-engineered to better suit Australian conditions, with many components being sourced locally a tradition that would continue right up until 1992, when Nissan ceased local manufacture.
In October 1979, the 200B was revised with a new grille, bumpers, seats, trim, and dashboard. The seats were a unique Australian design for the locally built cars. This facelift was penned by Paul Beranger, a former Holden designer – years later he would style the 2006 Toyota Aurion.
In 1980, a limited edition 200B Aspen GL sedan was released featuring distinctive shadow tone paint available in green, blue, or grey. The 200B was discontinued in May 1981, replaced by the Datsun Bluebird. Australian comedy band, Tripod, have written a song about the 200B, called "200B."[30]
New Zealand (160B/180B/200B)
This model was also released to New Zealand in 1977, assembled CKD in 4-door sedan and 5-door wagon forms. A coupe model was also released, imported built-up from Japan. Unlike the Australian models the sedans used the independent rear suspension system of the Japanese specification models. This Bluebird was the first to be assembled in Nissan New Zealand's own brand-new assembly plant at Wiri, South Auckland. For the first two years of assembly the cars were fitted with a 1.8 litre unit, hence they used the 180B nameplate. Automatic transmission was optional for both. Nissan also added its first luxury ZX version with this generation – features included velour upholstery, 'luxury' cut-pile carpet sourced locally and tinted glass. There was also, for the first time in Kiwi assembly, a wagon variant with mid-range trim and equipment.
During 1979 a number of changes were made on the car, namely an engine enlargement to 2.0 (leading to a renaming of the car to 200B), and a mild facelift, using new dual rectangular headlights and a new grille. Due to New Zealand's favour for smaller engined models, a 1.6 litre 160B variant was also introduced.
Production of the New Zealand 160/200B continued until late 1980, when it was replaced by the Datsun Bluebird (910).
North America (810)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/22/1977_Datsun_810_Wagon.jpg/220px-1977_Datsun_810_Wagon.jpg)
In North America, Datsun marketed the 810 series Bluebird sold as the Datsun 810 from February 1977 to 1980—the direct ancestor of the long running Datsun/Nissan Maxima range. The Datsun 810 model line began with the six-cylinder Nissan Bluebird 2000G6 sold in Japan. With a longer nose than the regular Bluebird, to accommodate a longer inline-six engine, it was powered by two versions of the SOHC L-series I6 engine: a 2.0 L displacement for the Japanese market and a 2.4 L24E unit (as found in the Datsun 240Z) for the US market. The Bluebird G6 used a carburetor for the base model and fuel injection for the sporty version. The 2.0 L engine was good for 122 PS JIS (90 kW), while the bigger American engine could reach 125 hp SAE (93 kW). The sport version channeled power through a four-speed manual transmission for the sedan and wagon, five-speed transmission for the coupe. These cars were rear-wheel drive and had a semi-trailing arm rear suspension. The station wagon variant, only sold in North America, had a rear live axle for load carrying reasons. Some fuel injected versions had automatic transmissions.
The 2-door coupé version was introduced in North America in January 1979 for the 1979 model year.[31] Around the same time, the 810 received an exterior refresh. The coupé version was never available in second generation 810/Maximas. The new Datsun 280ZX did not share much of the 810's chassis as thought, though the 810 was not available with that Z car's larger 2.8 L engine. The first use of the "Maxima" name happened on a domestic Japanese market luxury version of the Stanza, in August 1977.[32]
910 series
910 | |
---|---|
![]() | |
Overview | |
Production | 1979–1993[33] |
Assembly | Japan: Yokosuka, Kanagawa (Oppama Plant) Australia: Clayton, Victoria[34] |
Body and chassis | |
Body style | 4-door sedan[33] 5-door station wagon[33] 2-door coupé[33] |
Layout | FR layout[33] |
The Bluebird 910, which was the last rear wheel drive Bluebird, featured simple clean-cut lines, unlike the "Coke Bottle" styling of its predecessor.[35] It did however retain the same engine range, the same MacPherson strut suspension and the same 99-inch (2,500 mm) wheelbase as the 810.[35] Starting with this generation, in Japan the Bluebird returned to offering only four-cylinder vehicles, and the six-cylinder Bluebird was replaced by the Nissan Skyline based Nissan Leopard. Bluebirds of this generation were renowned for reliability but rusted away in salted areas long before the engine gave trouble. Nissan realigned with the Japanese Stanza/Auster/Violet sedans which were assigned to individual Japanese Nissan dealerships.
This car was also assembled in Australia, in South Africa, in Taiwan, and in New Zealand. This generation was also the basis of the North American Datsun/Nissan 810 Maxima starting in 1980.
In Europe, the Bluebird was joined in 1981 by the similar-sized Stanza, which gave Nissan buyers the alternative option of front-wheel drive and a hatchback body style for the first time, as front-wheel drive hatchbacks were by now overtaking rear-wheel drive saloons in popularity.
U11 series
U11 | |
---|---|
![]() Bluebird SSS-XG hardtop | |
Overview | |
Also called | Tan Chong Bluebird Yue Loong Bluebird 921/923 |
Production |
|
Assembly | Japan: Yokosuka, Kanagawa (Oppama Plant) New Zealand: Auckland[27] |
Body and chassis | |
Body style | 4-door saloon/sedan 4-door hardtop sedan 5-door wagon/estate |
Layout | FF layout |
Related | Nissan Stanza T12 |
Powertrain | |
Engine |
|
Transmission | 4/5-speed manual 3/4-speed automatic |
Dimensions | |
Wheelbase | 2,550 mm (100 in) |
Length | 4,360–4,500 mm (172–177 in) |
Width | 1,690 mm (67 in) |
Height | 1,370–1,430 mm (54–56 in) |
Curb weight | 1,080–1,215 kg (2,381–2,679 lb) |
Chronology | |
Successor | Nissan Avenir (wagon) |
The Bluebird switched to front-wheel drive in October 1983 but retained the boxy styling of its predecessor. At the time, Nissan's design chief believed this method of styling would remain popular. Even though every panel was changed and most details were considerably smoother, the drag coefficient remained a fairly high 0.39.[36]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/32/1987_Nissan_Bluebird_2.0_ZX-E_%2814334547702%29.jpg/220px-1987_Nissan_Bluebird_2.0_ZX-E_%2814334547702%29.jpg)
The range was offered in four-door sedan, four-door hardtop, and five-door station wagon forms. The coupé was deleted, and the hardtop sedan is rarely seen outside Japan.
This model was offered in Europe for only two years before Nissan began building the Auster as the Bluebird at its newly-opened plant in the UK in 1986. Certain Bluebird models (diesels and station wagons) continued to be offered alongside the T12 "Bluebird" in some markets. As usual, the Bluebird received ample standard equipment in European markets. In some markets, the petrol 2.0 was only available coupled to an automatic gearbox.[37]
Although the U11 sedans were replaced for the 1988 model year, the station wagon continued to be built until 1990. The six-cylinder Maxima also continued to be built (without the "Bluebird" portion of the name from May 1987) until October 1988, when an all-new Maxima appeared. Most of the wagons sold in Japan were to commercial vehicle specifications, but a plusher Wagon was also offered. The "Bluebird Wagon SSS Turbo Wingroad" had a 120 PS (88 kW) 1.8-liter inline-four.[38] It was the first car to receive the "Wingroad" name, in September 1987. The wagons/vans were built until May 1990, when they were replaced by the Nissan Avenir (Primera wagon in most export markets).
The range was available with 1.6, 1.8 and 2.0 L petrol engines, with the 1.8-litre four available with an optional turbocharger. The VG20ET V6 was offered for the first time in Japan in 1984, in a model with an extended front end, called the Bluebird Maxima. This 2 litre V6 was available naturally aspirated or as an intercooled turbo. The U11 Maxima featured a larger 3.0L VG30E. There were also naturally aspirated or turbocharged 2 litre diesels. Counterintuitively, the turbodiesel had better gas mileage in standardized test cycles, presumably due to it being less stressed – as long as one did not take full advantage of its better performance.[37]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/2d/1986_Nissan_Bluebird_Wagon_2.0_GL_01.jpg/220px-1986_Nissan_Bluebird_Wagon_2.0_GL_01.jpg)
Australia made do with the 910 series, which was facelifted in 1985. New Zealand marketing for the U11 proclaimed the vehicle as the 'Widetrack Bluebird', to differentiate it from its very similar-looking predecessor. Several Wiri-assembled models including a wagon were offered with 1.6 (base) or two-litre carburettor engines. The alloy head castings all had an unused location for a second spark plug per cylinder, as twin-plug, fuel-injected versions of the same engines were used in certain markets (US, Japan, Scandinavia) with stricter emission laws.
In the United Kingdom, the following versions were offered:
- 1.8 DX (1984–86)
- 2.0 GL/GL estate/SGL (1984–86)
- 1.8 Turbo ZX (1984–86)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b1/Yue_Loong_Bluebird_923SD_T9-956_20150411.jpg/220px-Yue_Loong_Bluebird_923SD_T9-956_20150411.jpg)
The U11 was sold as the Yue Loong Bluebird 921 / 923 in Taiwan.
T12/T72 series
Nissan Bluebird T12/T72 | |
---|---|
![]() |
The T12 and the later T72 Nissan Bluebird, is in fact a third generation Auster, rebadged and sold in Europe.
The T12 was introduced in Europe in 1985 as a replacement for the U11 Bluebird. From July 1986, the T12 was assembled from parts shipped in from Japan, at Washington, England. The saloon versions (four door) were available first and the hatchback (five door) became available in January 1987.
U12 series
U12 | |
---|---|
Overview | |
Also called | Nissan Stanza (North America) Ford Corsair (AUS) Nissan Pintara (AUS) Tan Chong Bluebird Yue Loong Bluebird 941 |
Production | 1987–1992 |
Assembly | Japan: Yokosuka, Kanagawa (Oppama Plant) |
Body and chassis | |
Body style | |
Layout | |
Related | Nissan Avenir |
Powertrain | |
Engine | |
Transmission |
|
Dimensions | |
Wheelbase | 100.4 in (2,550 mm) |
Length | 1990–91: 4.57 m (179.9 in) 1992: 4.59 m (180.7 in) |
Width | 1.70 m (66.9 in) |
Height | 1.37 m (54.1 in) |
Nissan replaced the boxy U11 in September 1987 with the U12 series, offered in four-door sedan and four-door hardtop body types.[39] It was designed to have a rounded appearance in comparison to the previous generation. The hardtop sedan was later fitted with a center "B" pillar structure to increase body stiffness. The top level car was the V6 VG20ET "Bluebird Maxima" station wagon from the previous generation U11 series and was still in production at the introduction of this generation.
The various grade configurations included the traditional "SSS" (SSS / twincam SSS / twincam SSS-X). In addition to the SSS series, the Bluebird wagon was replaced by the Nissan Avenir, and the sedans (LE / SE Saloon / XE Sedan / Super-select) were also available. The entry level 1600LE (five-speed manual transmission) started out at ¥ 1,198,000 to the top level Twin Cam Turbo 1800 cc offered on the SSS Attesa Limited (four-speed automatic) starting at ¥ 2,998,000 in sedan, and Hard Top bodystyles and boasted a wide variety of equipment and different combinations and grades. At the time of introduction, there was also the limited production SSS-R model, with lowered weight and a special high-power engine as well as oversized extra headlamps and racing livery.[39] The Bluebird U12 appeared around the same time as the Subaru Legacy.
Innovations for the U12 included the introduction of Nissan's mechanical four-wheel-drive system, called ATTESA and the ever popular SR20DET engine was introduced in the series 2 (HNU12) bluebirds (89–91). With the Maxima having been spun off into its own range, U12 Bluebirds were all four-cylinder models, with either a 1.6, 1.8 or 2.0 L petrol engine and also the option of an LD20 2.0l diesel. The sports and luxury versions came with a factory viscous LSD. Nissan made a turbocharged Bluebird from 1987 to 1990 named the RNU12, using the 1809 cc DOHC CA18DET that was sold in Japan and New Zealand. It also used ATTESA.
This model was sold as the Nissan Pintara in Australia, replacing a larger Skyline-based model, from 1989 to 1993. There, it had been codenamed ‘Project Matilda’,[40] leading the press to speculate it was a car developed uniquely for Australia—which was not the case. In Japan, a four-door sedan and four-door hardtop were offered, although Nissan of Australia did create a five-door Pintara 'Superhatch' model that was sold as the Bluebird in some export markets, including New Zealand. It was marketed as the 'Bluebird Aussie' in Japan, selling complete with a fluffy little koala, Aussie flag under the clock and other small touches.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/e5/1989_Nissan_Bluebird_1.8_XE_Saloon_HT.jpg/220px-1989_Nissan_Bluebird_1.8_XE_Saloon_HT.jpg)
Australian models came with the CA20E SOHC 2.0l EFI and KA24E SOHC 2.4l EFI motors. Sadly for Nissan Australia, Project Matilda was not the success it had hoped, even with a twin built for Ford Australia called the Corsair, which was even less successful. This led to the collapse of Nissan’s Australian manufacturing operations in the early 1990s. Most of the early Bluebirds of this generation sold in New Zealand were again assembled locally from CKD kits, as had been the case with almost all NZ-bound cars since the first generation in the early 1960s. The Japanese-made, NZ-assembled cars were replaced by Australian made U12 sedans at 'facelift' time though the Kiwi-built wagon, a body variant not made in Australia, carried on.[citation needed] NZ trim levels included SGS and ZX; like rival Toyota Australia, Nissan Australia, which ceased local manufacturing in 1994, was willing to build uniquely specified and badged models for its trans-Tasman customer.
The U12 was also sold in North America as the Nissan Stanza.
Trim levels of the Australian U12 Pintara were as follows: GLi: 2.0L manual 5 speed, high mounted brake light, AM/FM radio cassette Executive: 2.0L auto 4 speed, as above plus, power steering, remote boot release T: 2.4L manual or auto, as above plus 4 wheel disc brakes, tacho, split fold rear seat Ti: 2.4L manual or auto, as above plus limited slip differential, cruise control, climate control, central locking, electric windows, graphic equaliser, fog lamps, alloy wheels TRX: 2.4L manual or auto, as above plus sports seats, sports suspension, body kit, alarm, 6Jx14" alloy wheels (all other models have 5.5Jx14" wheels) Note: All models were available as a 4-door sedan and 5-door hatch, except the TRX, which was only available as a 4-door sedan. Note 2: The Corsair was available as a GL (CA20) and Ghia (KA24, and similar features as the Ti).
U13 series
U13 | |
---|---|
![]() | |
Overview | |
Production | 1991–1997 |
Assembly | Japan: Yokosuka, Kanagawa (Oppama Plant) |
Body and chassis | |
Body style | 4-door sedan 4-door hardtop |
Layout | |
Related | Nissan Altima U13 |
Powertrain | |
Engine | 1.6 L-DOHC-I4 (GA16DS), 97 PS 1.8 L-DOHC-I4 (SR18DE), 125 PS 2.0 L-DOHC-I4 (SR20DE), 145 PS 2.0 L DOHC Turbo-I4 (SR20DET), 210 PS 2.4 L-DOHC-I4 (KA24DE),112 KW 2.0 L OHC Diesel-I4, 76 PS |
Transmission | 5-speed manual transmission 4-speed automatic |
Dimensions | |
Wheelbase | 2,620 mm (103.1 in) |
Length | 4,585 mm (180.5 in) |
Width | 1,695 mm (66.7 in) |
Height | 1,405 mm (55.3 in) |
Curb weight | 1,070–1,370 kg (2,360–3,020 lb) |
The U13 series was launched in Japan in September 1991 as a four-door sedan and four-door hardtop. The two models were visually distinct: the four-door sedan had curves where its U12 predecessor had edges, while the hardtop, called the Nissan Bluebird ARX, had more traditional styling. The Bluebird wagon was replaced by the new Nissan Avenir. This series replaced the Stanza/Auster/Violet platform expansion that enabeled Nissan to sell a Bluebird-sized product at Nissan's Japanese dealership network, as the economic effects of the collapse of the Japanese asset price bubble began to unfold in Japan.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/42/1995-1997_Nissan_Bluebird_%28U13_S2%29_LX_sedan_01.jpg/220px-1995-1997_Nissan_Bluebird_%28U13_S2%29_LX_sedan_01.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f7/Nissan_U13_Bluebird_SSS_ATTESA.jpg/220px-Nissan_U13_Bluebird_SSS_ATTESA.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/ed/1991_Nissan_Bluebird_01.jpg/220px-1991_Nissan_Bluebird_01.jpg)
Several Japanese models included an All Wheel Drive version (ATTESA). The engines used in the Japanese models ranged greatly in capacity and type. The SSS Attesa LTD model used a "redtop" SR20DET (154 kW/206 hp). This was a similar engine/drivetrain package to the Pulsar GTi-R (169 kW). It had only a single throttle body as opposed the GTi-R multiple throttle body, smaller bearings, hydraulic rather than solid lifters, and a smaller turbo. The GTi-R had a large top mount intercooler, while the SSS ATTESA LTD had a smaller front mount intercooler. The Bluebird SSS was set apart from the North American Altima in that not only having the SR20DET and AWD Attesa as an option, it also had power folding retracting mirrors (some heated) and a rear wiper if equipped with a spoiler.
The Australian delivered U13 Bluebird was released in late 1993 and terminated in 1997. Series 1 ran from 1993 until 1995 while Series 2 ran from 1995 to 1997. Series 2 saw the addition of a driver's airbag, revised grille styling, and a seat belt warning light. The Series 1 LX model came equipped with cruise control standard but strangely it was an option on the Series 2.
The Australian U13 Bluebirds were available in three different models, LX—the base model but very well equipped, Ti—the luxury model, and the SSS—the sports model. Compared to the LX, the Ti had climate control, a sunroof, woodgrain styling, and gear selector display on the instrument cluster (automatic models only). while comparing the LX to the SSS, the SSS had a HUD (heads-up display—digital speedo on windscreen), climate control, fog lights, ski-port, woodgrain styling, and gear selector display on the instrument cluster (automatic models only). Despite there being a sports model (SSS), the LX was the fastest of the Australian models due to having the least weight. The engine used in the Australian and US U13 models was the KA24DE (112 kW, 210 Nm of torque).
The U13 Bluebird was introduced in New Zealand in early 1993, and was produced at Nissan's assembly plant in South Auckland from CKD packs imported from Japan until 1997, when it was replaced by the Primera. The model came in for lots of praise for its handling roadholding, with some models benefitting from the Attesa's passively steered rear wheels.[41] New Zealand models were; S (base model, not available until later), SE (mid-spec), SES (sport) and SEL (luxury). Several versions of the sedan, including the first local Bluebird to have standard factory-fitted air conditioning (automatic climate control in this case) and optional locally supplied leather upholstery. At launch, some local motoring writers criticised Nissan NZ's decision to fit luxury equipment items instead of airbags in top versions but the company insisted there was not yet sufficient retail or fleet buyer demand.
The US-built U13 (Nissan Altima) was released in 1993 and was similar to the Australian U13.
EQ7200 series
Nissan Motor signed an agreement with Dongfeng Motor Co. of China, to build the Bluebird there in the early 2000s. It was the U13 model that was chosen, and is sold there as the Nissan Bluebird.
Yulon Motor, the Taiwan-based automaker, developed this variant of the U13, called the EQ7200-II series, in 2001. This featured a U13 central section but heavily revised front and rear ends. However, the centre of the car remains the same, and the 2,620-millimetre (103 in) wheelbase is retained. No mention of the Taiwanese connection was made in advertising in mainland China.
The EQ7200-II was built until 2003, when it was replaced by a revised EQ7200-III model.
The car is considerably longer at 4,664 millimetres (183.6 in), as opposed to the original U13's 4,585 millimetres (180.5 in).
These Chinese models used a Chinese built SR20DE.
U14 series
U14 | |
---|---|
![]() | |
Overview | |
Production | 1996–2001 |
Assembly | Japan: Yokosuka, Kanagawa (Oppama Plant) |
Body and chassis | |
Body style | 4-door sedan |
Layout | FF & 4WD |
Powertrain | |
Engine | 1.8 L-DOHC-I4 (SR18DE), 125 PS 2.0 L-DOHC-I4 (SR20DE), 145–150 PS 2.0 L-DOHC-I4 (SR20VE), 190–205 PS 2.0 L OHC Diesel-I4 (CD20E), 76 PS 1.8 L-DOHC-I4 (QG18DE) |
Transmission | 5 speed manual 4 speed automatic CVT automatic |
Dimensions | |
Wheelbase | 2,600 mm (102.4 in) |
Length | 4,565 mm (179.7 in) |
Width | 1,695 mm (66.7 in) |
Height | 1,395 mm (54.9 in) |
Curb weight | 1,140–1,330 kilograms (2,510–2,930 lb) |
Nissan switched to boxy styling for the final U14 Bluebird for January 1996. The American Altima developed into a completely separate line of cars, with new L-series chassis codes. But in its home market of Japan – also the only market it was sold new in – the Bluebird was targeted more at buyers who favoured the formality of larger Japanese sedans. To fit in with a lower bracket in Japanese taxation legislation, the U14 retained a 1,700 mm (66.9 in) width.
Only a four-door sedan was offered. The hardtop and the option of a 1.6 L engine were removed. Engine choices were either the SR18(DE) or SR20(DE) with available all-wheel-drive (ATTESA) versions. The Nissan Hyper CVT automatic transmission was available in this generation along with standard four-speed automatic, five-speed manual, or as an all-wheel-drive with a five-speed manual. Some models had a 1973 cc diesel CD20E engine. Models offered include the standard LeGrand, luxury Eprise and sports-oriented SSS, though SSS no longer referred to a truly sporting model in the range.
The Nissan Bluebird ended production in Japan in 2001 and was replaced by Nissan Maxima, Nissan Teana, and Nissan Altima internationally, and the Nissan Bluebird Sylphy in Japan. It was a popular export to Russia, Africa and New Zealand.
Notes and references
- ^ a b Madeley, p. 22
- ^ Bent, Alan. "1956 Datsun 113 Model". Earlydatsun.com. Retrieved 3 June 2014.
- ^ "Company History". Yulon Motors. Retrieved 1 February 2011.
- ^ Bent, Alan. "1959 Datsun 115 Model". Earlydatsun.com. Retrieved 3 June 2014.
- ^ Webster, Mark (2002), Assembly: New Zealand Car Production 1921–98, Birkenhead, Auckland, New Zealand: Reed, p. 78, ISBN 0-7900-0846-7
- ^ Motor's "Finnish correspondent" (12 October 1964). "Japanese Datsuns in Europe". Motor.
{{cite journal}}
:|author=
has generic name (help) - ^ Nissan Manufacturers in Australia Retrieved on 11 April 2012
- ^ a b Quattroruote Speciale: Tutte le Auto del Mondo 1967 (in Italian). Milano: Editoriale Domus S.p.A. February 1967. p. 195.
- ^ Tutte le Auto del Mondo 1967, p. 196
- ^ Davis, Pedr; Davis, Tony (1990). Volvo downunder: A Swedish success story. Blakehurst, New South Wales: Marque. p. 76. ISBN 0-947079-14-9.
- ^ a b Britten, Tim (31 July 2012). "From The Classifieds: 1971 Datsun 1600 GL". Carsales. Retrieved 29 September 2015.
- ^ a b "Datsun rises again". Carsales. 21 March 2012. Retrieved 29 September 2015.
- ^ a b c d e f "OHC is the fashion: Japan's Datsun Bluebird in latest form as 1300 and 1600". Autocar. 127 (nbr 3747): Pages 25–26. 7 December 1967.
- ^ a b c d e f g h i j "Autotest: Datsun 180B Bluebird". Autocar. 147 (4217): 36–40. 3 September 1977.
Completely new body, with larger windows and improved visibility for Datsun's mid-range car. Average performance coupled with excellent economy and cheapest petrol. Handling improved at expense of ride, now almost harsh. Brakes not up to current standards
- ^ "Datsun 610 Hardtop", brochure, Canada, 1973, retrieved 20 January 2013
- ^ a b World Cars 1976. Bronxville, NY: L'Editrice dell'Automobile LEA/Herald Books. 1976. p. 376. ISBN 0-910714-08-8.
- ^ "自動車ガイドブック: Japanese motor vehicles guide book 1973/1974" (in Japanese). 20. Japan: Japan Automobile Manufacturers Association. 30 October 1973: 123.
{{cite journal}}
: Cite journal requires|journal=
(help) - ^ World Cars 1976, p. 377
- ^ "Nissan Bluebird – Used Car Research". GoAuto. Retrieved 28 September 2015.
- ^ a b c d e "Nissan Bluebird (P610 180B (Mk4 Bluebird))". GoAuto. Retrieved 28 September 2015.
- ^ New Datsun 180B GL, Deluxe and SSS (PDF). Nissan Australia. May 1974. 7729.5.74. Retrieved 28 September 2015.
- ^ Loon, A. J. van (April 1975). "The GX... It's better with air" (PDF). Wheels. Sydney: 36–41, 88–89. Retrieved 28 September 2015.
- ^ Datsun saves again in '75 (National Sales Training), 1974, p. 19
- ^ Datsun: La voiture maximum (catalog) (in French), Nissan Automobile Company (Canada) Ltd., 30 August 1975, p. 13, 99999-01099. 100M EP
{{citation}}
: Unknown parameter|trans_title=
ignored (|trans-title=
suggested) (help) - ^ a b Graham Robson, A-Z of Cars of the 1970s, Bay View Books, 1990, page 49
- ^ Datsun 200B brochure Retrieved on 14 August 2011
- ^ a b c d Nissan Bluebird (810) Retrieved on 14 August 2011
- ^ "自動車ガイドブック [Japanese Motor Vehicles Guide Book]" (in Japanese). 25. Japan: Japan Automobile Manufacturers Association. 10 October 1978: 112. 0053-780025-3400.
{{cite journal}}
: Cite journal requires|journal=
(help) - ^ "Datsun 200B technical specifications". Unique Cars & Parts.
- ^ "Box Set Lyrics – 05 – 200B". Members.optusnet.com.au. Retrieved 6 December 2010.
- ^ Lamm, Michael (January 1981). "and the new Datsun 810". Popular Mechanics. 155 (1). New York City: 85, 87, 118.
The coupe, introduced in January 1979, has been discontinued, but the four-door sedan and wagon remain.
- ^ "検索結果: 1979年 ニッサン スタンザ 4door 1800 Maxma X-E (sic)". Gazoo.com (in Japanese). Toyota Motor Corporation. Retrieved 10 February 2012.
{{cite web}}
: Unknown parameter|trans_title=
ignored (|trans-title=
suggested) (help) - ^ a b c d e Nissan Bluebird (910) Retrieved from www.autocade.net on 11 April 2011
- ^ Tony Davis, Aussie Cars, 1987, page 163.
- ^ a b Martin Lewis, A-Z of Cars of the 1980s, 1994, page 102
- ^ "Nissan Bluebird: L'habit ne fait pas le moine". Le Moniteur de l'Automobile (in French). 35 (793). Brussels, Belgium: Editions Auto-Magazine: 16. 19 April 1984.
{{cite journal}}
: Unknown parameter|trans_title=
ignored (|trans-title=
suggested) (help) - ^ a b Le Moniteur de l'Automobile (no. 793), p. 18
- ^ 自動車ガイドブック (in Japanese), vol. 34, Japan: Japan Automobile Manufacturers Association, 28 October 1987, p. 153, 0053-870034-3400
{{citation}}
: Unknown parameter|trans_title=
ignored (|trans-title=
suggested) (help) - ^ a b 別冊CG: 自動車アーカイヴ 80年代の日本 (in Japanese). Tokyo: Nigensha. 2007. p. 112. ISBN 978-4-544-91018-6.
{{cite book}}
: Unknown parameter|trans_title=
ignored (|trans-title=
suggested) (help) - ^ Information, Opportunism and Economic Coordination, Peter E. Earl, Edward Elgar Publishing, 2002, page 28
- ^ Anderson, Donn, ed. (April 1993). "High flying Bluebird". New Zealand Car. Vol. 7, no. 6. Auckland: Accent Publishing Cnr. pp. 48–50. ISSN 0113-0196.
- Nissan Heritage Collection
- Ken Togo's paper Infant Industry Policy: A Case of Japanese Automobile Industry Before 1945
- Japanese Society of Automotive Engineers (JSAE)
- Madeley, Christopher (July 2005), "Kaishinsha, DAT, Nissan and the British Motor Vehicle Industry" (PDF), International and Japanese Studies Symposium: The Automobile in Japan, London, UK: London School of Economics and Political Science, No. IS/05/494
External links
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- Drive.com.au Nissan Bluebird Review
- Japanese Imports Safety Recalls
- RatDat.com – paint colors, sales brochures, and model names
- http://www.earlydatsun.com/index.html
- "1932 Datsun 11". Early Datsun Homepage. Retrieved 22 August 2010.
- "1933 Datsun 12". Early Datsun Homepage. Retrieved 23 August 2010.