Jump to content

Google Authenticator

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 31.11.130.35 (talk) at 15:05, 6 November 2022 (Undid revision 1119400473 by Grace Vio (talk)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Google Authenticator
Developer(s)Google
Initial releaseSeptember 20, 2010; 14 years ago (2010-09-20)[1]
Stable release
Android7.0 / 28 August 2024; 2 months ago (2024-08-28)[2][3]
iOS4.2.1 / 26 June 2024; 4 months ago (2024-06-26)[4]
Repositorygithub.com/google/google-authenticator
Written in
Operating systemAndroid, iOS, BlackBerry OS
PlatformMobile
LicenseProprietary freeware (some versions were under Apache License 2.0)

Google Authenticator is a software-based authenticator by Google that implements two-step verification services using the Time-based One-time Password Algorithm (TOTP; specified in RFC 6238) and HMAC-based One-time Password algorithm (HOTP; specified in RFC 4226), for authenticating users of software applications.[5]

When logging into a site supporting Authenticator (including Google services) or using Authenticator-supporting third-party applications such as password managers or file hosting services, Authenticator generates a six- to eight-digit one-time password which users must enter in addition to their usual login details.

Google provides Android,[6] BlackBerry, and iOS[7] versions of Authenticator.

An official open-source fork of the Android app is available on GitHub.[8] However, this fork has not been updated since 2020. Likewise, for old versions of the Google Authenticator apps for iOS and BlackBerry, the source code is also freely available. Yet this source code, too, has not been updated in years.[9]

Current releases of the software are proprietary freeware.[10]

Typical use case

To use Authenticator, the app is first installed on a smartphone. It must be set up for each site with which it is to be used: the site provides a shared secret key to the user over a secure channel, to be stored in the Authenticator app. This secret key will be used for all future logins to the site.

To log into a site or service that uses two-factor authentication and supports Authenticator, the user provides a username and password to the site. The site then computes (but does not display) the required six-digit one-time password and asks the user to enter it. The user runs the Authenticator app, which independently computes and displays the same password, which the user types in, authenticating their identity.[citation needed]

With this kind of two-factor authentication, mere knowledge of username and password is insufficient to break into a user's account - the attacker also needs knowledge of the shared secret key, or physical access to the device running the Authenticator app. An alternative route of attack is a man-in-the-middle attack: if the computer used for the login process is compromised by a trojan, then username, password, and the one-time password can be captured by the trojan, which then can initiate its own login session to the site, or monitor and modify the communication between the user and the site.[citation needed]

Technical description

During setup, the service provider generates an 80-bit secret key for each user (whereas RFC 4226 §4 requires 128 bits and recommends 160 bits).[11] This is transferred to the Authenticator app as a 16, 26 or 32 character base32 string, or as a QR code.

Subsequently, when the user opens the Authenticator app, it calculates an HMAC-SHA1 hash value using this secret key. The message can be:

  • the number of 30-second periods since the Unix epoch (TOTP); or
  • a counter that is incremented with each new code (HOTP).

A portion of the HMAC is extracted and displayed to the user as a six digit code.

Source code license

The Google Authenticator app for Android was originally open source, but later became proprietary.[10] Google made earlier source for their Authenticator app available on its GitHub repository; the associated development page stated:

"This open source project allows you to download the code that powered version 2.21 of the application. Subsequent versions contain Google-specific workflows that are not part of the project."[12]

The latest open-source release was in 2020.[8]

Following Google Authenticator ceasing to be open source, a free-software clone was created, predominantly a fresh rewrite but including some code from the original. The currently-maintained fork of this clone is called FreeOTP+.

See also

References

  1. ^ "Google Is Making Your Account Vastly More Secure With Two-Step Authentication - TechCrunch". TechCrunch. 2010-09-20. Retrieved 2016-03-12.
  2. ^ "Google Authenticator". Google Play. Retrieved 2024-08-30.
  3. ^ "Google Authenticator 7.0". APKMirror. 2024-08-28. Retrieved 2024-08-30.
  4. ^ "Google Authenticator". App Store. Retrieved 2024-08-30.
  5. ^ "GitHub - google/google-authenticator: Open source version of Google Authenticator (except the Android app)". GitHub. 18 May 2022. These implementations support the HMAC-Based One-time Password (HOTP) algorithm specified in RFC 4226 and the Time-based One-time Password (TOTP) algorithm specified in RFC 6238.
  6. ^ "Google Authenticator - Apps on Google Play".
  7. ^ "Google Authenticator". App Store.
  8. ^ a b "google/google-authenticator-android: Open source fork of the Google Authenticator Android app". GitHub. 16 May 2022.
  9. ^ "google-authenticator/mobile at master · google/google-authenticator". GitHub.
  10. ^ a b Willis, Nathan (22 January 2014)."FreeOTP multi-factor authentication". LWN.net. Retrieved 10 August 2015.
  11. ^ "RFC 4226 - HOTP: An HMAC-Based One-Time Password Algorithm". Tools.ietf.org. 2005-02-15. Retrieved 2019-03-25.
  12. ^ "google-authenticator - Two-step verification - Google Project Hosting". 18 May 2022.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Google_Authenticator&oldid=1120351283"