Jump to content

Henry Fleuss

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by GreenC bot (talk | contribs) at 20:58, 1 November 2022 (Rescued 1 archive link; remove 1 citation per WP:USURPURL and WP:JUDI. Wayback Medic 2.5). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Henry Albert Fleuss
Born(1851-06-13)June 13, 1851
DiedJanuary 6, 1933(1933-01-06) (aged 81)
Occupations
  • Engineer
  • diver

Henry Albert Fleuss (13 June 1851 – 6 January 1933)[1] was a pioneering diving engineer, and Master Diver for Siebe, Gorman & Co. of London.

Fleuss was born in Marlborough, Wiltshire in 1851.[2]

In 1878 he was granted a patent which improved rebreathers. His apparatus consisted of a rubber mask connected to a breathing bag, with (estimated) 50-60% O2 supplied from a copper tank and CO2 scrubbed by rope yarn soaked in a solution of caustic potash, the system giving a duration of about three hours.[2][3] Fleuss tested his device in 1879 by spending an hour submerged in a water tank, then one week later by diving to a depth of 5.5m in open water, upon which occasion he was slightly injured when his assistants abruptly pulled him to the surface.

Fleuss's apparatus was first used under operational conditions in November 1880 by Alexander Lambert, lead diver of the Severn Tunnel construction project. Trained by Fleuss, he was able to close a submerged sluice door in the tunnel which had defeated the best efforts of hard hat divers due to the danger of their air supply hoses becoming fouled on submerged debris, and the strong water currents in the workings.[2]

The same apparatus was later used several times to rescue mine workers in flooded workings.

Some time before the First World War, the Fleuss-Davis independent breathing set for hardhat divers appeared. This device consisted of two 10-cubic-foot (280 L) tanks, one each for compressed air and oxygen. The gases were mixed in a manifold between the two tanks and the diver's mouthpiece. The manufacturer claimed success of this unit to depths of 66 feet.[2]

Fleuss also invented the Fleuss vacuum pump, which was a double action Guericke type pump which delivers an almost constant suction. It uses a cylinder divided in halves: as one half of the cylinder is filled with air, the other half is evacuating air to the atmosphere by one stroke of the pump. The next stroke reverses this action, producing the constant flow.

He died 6 January 1933 at Thorndon Cross, Okehampton, aged 81.[4]

References

  1. ^ "Henry Albert Fleuss". International Scuba Diving Hall of Fame. Archived from the original on 27 March 2019. Retrieved 12 August 2019.
  2. ^ a b c d Davis, RH (1955). Deep Diving and Submarine Operations (6th ed.). Tolworth, Surbiton, Surrey: Siebe Gorman & Company Ltd. p. 693.
  3. ^ Quick, D. (1970). "A History Of Closed Circuit Oxygen Underwater Breathing Apparatus". Royal Australian Navy, School of Underwater Medicine. RANSUM-1-70. Archived from the original on 9 May 2008. Retrieved 3 March 2009.{{cite journal}}: CS1 maint: unfit URL (link)
  4. ^ "Deaths". Western Times. No. 33319. 13 January 1933. p. 4. Retrieved 12 August 2019 – via British Newspaper Archive.