Mack Trucks
File:Mack Trucks logo.png | |
Company type | Subsidiary of AB Volvo since 2001 |
---|---|
Industry | Manufacturing |
Founded | 1900 |
Headquarters | Greensboro, North Carolina United States |
Key people | Dennis Slagle (CEO) [1] |
Products | Trucks |
Number of employees | 5,037 (2005) |
Parent | AB Volvo |
Website | www.macktrucks.com |
Mack Trucks is a truck-manufacturing company. A wholly owned subsidiary of Renault Véhicules Industriels since 1990, Mack Trucks is currently a subsidiary of AB Volvo. The company's headquarters are located in Greensboro, North Carolina. On September 3, 2009, the 3 month transition from their headquarters in Allentown, Pennsylvania, to Greensboro was completed.[2]
Operations
Currently, the company's primary manufacturing facilities are located at the Macungie Assembly Operations plant in Lower Macungie Township, Pennsylvania, and at their New River Valley Assembly Operations in Dublin, Virginia. Mack Trucks is a top producer in the vocational, on-road-vehicle market, Class 8 through Class 13. It is also the most popular manufacturer of heavy-duty off-road trucks in America. The company's distinctive logo, a chrome-plated (sometimes gold-plated) bulldog, can be found on the front of almost all Mack trucks. A Mack truck with a gold plated bulldog indicates that the entire truck is made of Mack components. Trucks with another manufacturer's transmission, engine, rear axles or suspension are given the chrome plated bulldog.
Mack trucks have been sold in 45 countries. The Macungie, Pennsylvania, manufacturing plant, located close to its abandoned Allentown corporate headquarters, produces the Mack Granite, LE, and MR models, including the construction and refuse series products. In Dublin, Virginia, the Pinnacle and CH highway models are made at the New River Valley assembly plant. Engines, the Maxitorque ES T300 series transmissions, the TC-15 transfer cases, and rear engine power take-offs are designed and manufactured in Hagerstown, Maryland, which, according to local historians, was the original factory location.
Parts for Mack’s right-hand-drive vehicles are produced in Brisbane, Queensland, Australia, for worldwide distribution. Assembly for South America is done at Mack de Venezuela C.A., in Caracas, Venezuela. The Venezuela operation is a complete knock down (CKD) facility. Components are shipped from the United States to Caracas, and the plant then does final assembly.
In addition to its Macungie manufacturing facility, Mack also has a remanufacturing center in Middletown, Pennsylvania where it takes used parts and refurbishes them for resale/reuse.
2008 restructuring plan
On August 14, 2008, Mack Trucks announced a major restructuring plan that includes:[3]
- Relocation of Mack's head office, product development, most support functions, and purchasing functions to Greensboro, North Carolina in 2009. Mack's parent, Volvo Trucks, already has its North American base in Greensboro.
- Assembly of all produced Mack highway vehicles in Macungie, Pennsylvania from 2008.
- Mack's testing facility in Allentown, Pennsylvania, will be converted into a "customer demonstration/reception center" in 2010.
- Restructuring the parts distribution network by 2010.
- Now delayed to 1st quarter 2011
- As of November 2009, assembly of Mack Highway product will shift to the Macungie Manufacturing Division. 100% of Mack's product will be produced in Macungie.
History
Corporation timeline
This is a timeline of Mack Trucks history. Most of the information is taken from the Mack History page at MackTrucks.com, unless otherwise noted.[4]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/2c/NYC_Transit_Authority_Mack_C-49_6259.jpg/220px-NYC_Transit_Authority_Mack_C-49_6259.jpg)
- 1890: John M. Mack gets a job at Fallesen & Berry, a carriage and wagon company in Brooklyn, New York.
- 1893: Mack and his brother, Augustus F. Mack, buy the company John worked for.
- 1894: A third Mack brother, William C. Mack, joins his brothers in the company's operations. The Macks try working with steam powered and electric motor cars.
- 1900s: Inspired by Orville and Wilbur Wright, Willis Carrier and Henry Ford's inventions, John Mack has a vision, dreaming about producing heavy duty trucks and engines.
- 1900: The Macks open their first bus manufacturing plant. The Mack bus, ordered by a sightseeing company, is delivered.
- 1902: The Mack Brothers Company established in New York.
- 1904: The company introduces the name Manhattan on its products.
- 1905: Allentown selected as the home of main manufacturing operations, and headquarters. A fourth Mack brother, Joseph Mack, becomes a stockholder. Mack begins to make rail cars and locomotives.
- 1910: The Manhattan name changed; from now on, the trucks are known as Mack Trucks. Charles Mack, a fifth Mack brother, joins the company.
- 1911: The Saurer Motor Truck Company, headed by C.P. Coleman, had the rights to manufacture and sell heavy trucks under the Saurer brand name at its plant in Plainfield, New Jersey. On September 23, 1911, the Saurer Motor Truck Company merged with the Mack Brothers Motor Car Company of Allentown, headed by J. M. Mack, to form the International Motor Truck Company (IMTC). IMTC would continue to make and sell trucks using the Saurer name until 1918. The capitalization of IMTC was $2.6 million total ($1.6m for Saurer, or 61.5%, and $1.0m for Mack Brothers).[5]
- 1912: Brothers John and Joseph Mack leave.
- 1919: The United States Army conducts a transcontinental project using Mack Trucks to study the need for national highway systems.
- 1922: The company name is changed to Mack Trucks, Inc. The bulldog is accepted as the company's corporate symbol.
- 1924: Jack Mack dies in a car crash in Weatherly, Pennsylvania.
- 1932: While recuperating from an operation, Alfred Fellows Masury, Mack's Chief Engineer, carved the first bulldog hood ornament. Masury applied for and received a patent for his design; that Bulldog design has adorned Mack trucks ever since!
- 1933: Mack Trucks helps in the building of many American structures, including the Hoover Dam.
- 1956: Mack Trucks, Inc. buys Brockway Motor Company. (Brockway ceases in 1977)
- 1966: Mack begins production at its assembly plant in Oakville, Ontario, Canada. The facility closed in 1993.
- 1967: Mack Trucks becomes a part of the Signal Oil and Gas Company. Later that year Signal changes its name to The Signal Companies, Inc.
- 1970: Mack moves into its new Allentown world headquarters.
- 1979: Renault buys 10% of Mack Trucks, Inc.
- 1982: Renault increases ownership stake to 20%, Signal lowers its stake to 10%.
- 1983: Mack Trucks conducts an IPO and issues 15.7 million shares of common stock. Renault increases holdings to 40%, while Signal reduces its stake to 10.3%.
- 1987: Renault reorganizes; Renault Véhicules Industriels buys Renault's Mack shares.
- 1990: Mack Trucks become a wholly owned subsidiary of Renault Véhicules Industriels
- 2001: Mack together with Renault Véhicules Industriels becomes part of Volvo AB of Sweden, the parent company Renault S. A. receives a 20% stake in the combined company. (In 2002 Renault Véhicules Industriels changes its name to Renault Trucks.)
- 2006: Mack has a record sale year.
- 2008: Mack announces relocation of corporate headquarters to Greensboro, North Carolina.[3]
Market, model and products timeline
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/cc/1920s_Mack_AC_truck.jpg/250px-1920s_Mack_AC_truck.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/64/Mack-wrecker-1941.jpg/250px-Mack-wrecker-1941.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/9/9f/MtWilsonGlass-1917.jpg/250px-MtWilsonGlass-1917.jpg)
This is a timeline of Mack Trucks history. Most of the information is taken from the Mack History page at MackTrucks.com, unless otherwise noted.[4]
- 1909: A junior model 1-1/2 ton truck is introduced.
- 1910: Mack delivers the first motorized hook and ladder firetruck used by the city of Morristown, New Jersey.
- 1914: The Mack ABs are introduced.
- 1916: The Mack ACs are introduced. Ultimately, over 40,000 of these models are sold.
- World War I: Mack delivers over 6,000 trucks, both to the United States and Britain's military. A legend surfaces that British soldiers would call for Mack Bulldogs to be sent when facing adversity.
- 1918: Mack becomes the first manufacturer to apply air cleaners and oil filters to their trucks.
- 1920: Mack Trucks are the first with power brakes on their trucks.
- 1922: Mack introduces first truck with drive shaft instead of chain 1922 Model AB
- 1922: International Motors Company develops gasoline-driven passenger railcar for the New York, New Haven and Hartford Railroad. A standard passenger railcar on top of a standard motor truck chassis, seating between 36 to 50 passengers, at a cost of $16,500. The car operates in a ten-mile (16 km) stretch between New Haven, and Derby, Connecticut.[6]
- 1927: Mack's BJ and BB models built.
- 1932: The Bulldog starts to travel on the hoods of Mack trucks.
- 1936: The Mack E series introduced. Mack Jr trucks introduced.
- 1938: Mack trucks is the first company to produce its own heavy-duty diesel engines.
- World War II: Mack trucks were used by the military in various capacities, and the company built many heavy-duty trucks to help the allied forces win the day. From 1941 to 1945, the combined armed forces of the United States, Great Britain, France, and Canada took delivery of 35,096 total vehicles. The combat "N Series" (NB, NJU, NM, NO, NR, etc.) accounted for 26,965 of the total. Commercial type vehicles including: trucks, off-highway, fire-trucks, trailers, and buses, accounted for the rest. A total of 2,053 NO models alone were produced from 1940 to 1945. The 6x6 7-yard/2-ton NO was the most important specifically military model, and could be used as a transport or tractor for the 155 mm Long Tom field gun. Mack also built over 2600 power trains for tanks. The Allentown bus plant (5C) built Vultee PBY Catalina flying boats as well as components for the BT-13 Valiant Trainer and B-24 Liberator Bombers. More than 700 NJU (5-to-6 ton 4x4) models were in the hands of the U.S. Army by 1942. In 1939 & 1940 the French and British received several hundred NR4 and EXBU models.
- 1950: The Mack A Model series of trucks is introduced, produced until 1953.
- 1953: The Mack B Model series of trucks is introduced. 127,786 produced until 1966.
- 1955: The D Model low cab forward city delivery truck entered the market. Access to the engine compartment was possible by the Verti-lift cab. The cab lifted straight up hydraulically, guided by a forklift style mast behind the cab. Two styles of D Models were produced, the first styling had a square grille and no dress up trim. It was produced in 1955 and early 1956. The second styling included a styled grille, cab rear corner windows and stylish emblems and trim. The second styling was built from mid 1956 until the end of the D Model in 1958. A total of 832 D Model Mack Trucks were produced from 1955 until 1958.
- 1956: City of Hamilton, Bermuda buys first diesel-power fire truck (B85F).
- 1959: The first aluminum rivetted construction COE (cab-over-engine) family of trucks is introduced: The G Model which had a short production due to a striking resemblance to the Kenworth COE and Mack having the F Model ready for production.[citation needed] A total of 2181 G Model Mack Trucks were produced from 1959 until 1962.
- 1962: The Second of the COE (cab-over-engine) family of trucks is introduced: The F Model all steel sleeper (FL) or non sleeper (F) is the first of this family of models for Mack.
- 1965: Mack releases the Super Pumper System, to be used by the New York City fire department. It would help put out 2,200 fires.
- 1965: The R Model Series introduced, to replace the B Model Series.
- 1966: The RL (for R-Western) model built at Hayward, California until 1981.
- 1969: Mack patents the cab air suspension.
- 1975: Macungie plant opens, build the Cruise-Liner series until 1983.
- 1977: Super-Liner introduced, production runs for 15-years until 1993.
- 1978: Introduction of the low-cab-forward urban MC/MR series.
- 1979: Medium-duty model Mid-Liner introduced, built by Renault Véhicules Industriels in France
- 1982: Production of the MH Ultra-Liner model begins.
- 1988: Mack introduces the CH series for highway applications.
- 1989: E7 engine replaces E6 engine
- 1990: The R Model was in production until 1990. The RB and RD remained in production after that until being replaced by the Granite.
- 1994: Mack introduces the LE (low entry) refuse vehicle.
- 1998: Electronic Unit Pump (EUP) replaces electronic fuel injection pump
- 1999: A new premium highway tractor is introduced: the "Vision by Mack".
- 2001: Medium-duty Freedom series introduced (built by Renault Trucks in France like its predecessor, the Mid-Liner series).
- 2001: Mack redesigns R Series dash with new gauges and buttons and door padding.
- 2001: Granite series for construction applications introduced.
- 2003: Mack pulls out of the medium-duty market and discontinues the Freedom series.
- 2005: Mack stops producing the DM model, the last Mack that used the R-Model cab, the RB was also discontinued at the beginning of 2005. In some countries the DM is the most popular truck for construction use.
- 2006: Introduction of Pinnacle highway vehicle it is which was the replacement for the Vision highway product.
- 2007: A new product line is introduced to include Models LEU and MRU amongst others.
- 2007: Introduction of US07 compliant engines in all of its trucks.[citation needed]
- 2008: In March Titan was introduced. A HD duty model with the 16-liter big-block MP10, the largest ever 6-cylinder engine from Mack, with 515, 565, and 605 horsepower (451 kW) models.[7][8]
- 2010: In October Mack announced that a version of its Terrapro Cabover would run on natural gas using a Cummins Westport engine.[9]
Products
Current models
North America
- Construction Series:
- Granite
- Granite Axle Back
- TerraPro Cabover
- Granite
- Heavy Duty:
- Highway Series:
- Pinnacle:
- Pinnacle Sleepers
- Pinnacle Axle Forward
- Pinnacle DayCab
- Pinnacle Rawhide
- Smartway
- Pinnacle:
- Refuse Series:
- TerraPro Cabover
- TerraPro Low Entry
- Granite Axle Back
- Granite
- Military:
- Granite Armored Line Haul
Australia, New Zealand and South Africa
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/36/Mack_Granite_02.jpg/220px-Mack_Granite_02.jpg)
- List of current models produced for the Australian, New Zealand, and South African market at the Wacol, Queensland factory.[12][13]
- Granite
- Metro-Liner
- Super-Liner
- Titan
- Trident
- Trident Axle Forward
- Trident Axle Back
- TerraPro (Overseas order through Mack Trucks Australia)
- TerraPro Cabover
- TerraPro Low Entry
Fire apparatus products
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/58/Mack_Engine_343_FDNY_jeh.jpg/220px-Mack_Engine_343_FDNY_jeh.jpg)
Mack Trucks produced fire apparatuses from 1911 until 1990.[14] Despite the abrupt shutdown of their production, many have been refurbished and still serve with fire departments throughout the world.
Some examples of Mack fire apparatus:
- MC611F12 pumper
- MR686P aerial trucks
- MR686S 90' Bronto aerial truck
- MR690S 100 aerial truck
- MR688P pumper
- MS Midliner pumper
- CF-611 series cab-forward apparatus
- CF-700 series attack engine
R/RB, U, RD, DM models
Mack started to produce the R and U Model in the early 1960s for highway use, and the RD and DM Models for construction use. The 4 models featured the same cab; the U and DM had the cab offset to the left, and the early RD and DM had 3-piece steel hoods. They later had 1-piece hoods, the RD had a new hood, and the DM the U hood. In the late 1980s, the R and U Models were discontinued and the RB was introduced, mostly for severe-duty applications. The hood was modified slightly for the model RB.
2004 was the last year for the RD, and 2005 for the RB and DM. The DM was the last model to use this cab style, and was the last model of this family to be produced. As a replacement for the construction models, Mack started to offer the Granite, Granite Bridge-Formula and Granite Axle-back, which feature a centered cab, which is not offset like the DM.
Also this model is serving in the Mexican Army as a Troop and Utility Truck in Configuration 6X6 OR 6X4
Maxidyne engine
In the early 1960s, Mack Truck's executive vice president of product and engineering, Walter May, developed the Maxidyne high-torque rise engine. The engine was first available in the 1968 model year trucks. This was an industry-changing event. The Maxidyne allowed a heavy Class 8 truck to be operated with a 5 speed (Maxitorque) transmission. Previously, heavy trucks were typically equipped with 10 or more gears.
Other products
- MP engine series
Trademark
The company's trademark is the Bulldog. Mack trucks earned this nickname in 1917, during World War I, when the British government purchased the Mack AC model to supply its front lines with troops, food and equipment. British soldiers dubbed the truck the "Bulldog Mack", because they said it had "the tenacity of a bulldog." Its pugnacious, blunt-nosed hood, coupled with its incredible durability, reminded the soldiers of the tenacious qualities of their country's mascot, the British Bulldog.[15][16]
The logo was first used in 1921 for the AB chain drive models and made the official corporate logo in 1922.[17]
Leadership
This is a list of the highest ranking executive officer of Mack Trucks since its inception:
Mack leader | Dates of service |
---|---|
John M. Mack | 1900 to 1905 and 1909 to October 17, 1911 |
Otto Mears | April 29, 1905, to January 9, 1906 |
Jacob Sulzbach | January 9, 1906, to January 8, 1907 |
Thomas Rush | January 8, 1907, to December 8, 1908 |
Charles P. Coleman | October 17, 1911, to June 13, 1913 |
John Calder | June to October 1913 |
Vernon Munroe | October 22, 1913, to May 23, 1917 |
Alfred J. Brosseau | May 15, 1917, to September 24, 1936 |
Emil C. Fink | January 28, 1937, to January 1, 1943 |
Charles T. Ruhf | August 5, 1943, to June 6, 1949 |
Edwin D. Bransome | June 6, 1949, to January 11, 1955 |
Peter O. Peterson | January 11, 1955, to December 31, 1958 |
Christian A. Johnson | 1958 to 1962 (acting President) |
Nicholas Dykstra | July 20, 1961, to September 1, 1962 |
C. Rhoades McBride | September 7, 1962, to January 6, 1965 |
Zenon C.R. Hansen | January 7, 1965, to January 28, 1972 |
Henry J. Nave | January 28, 1972, to January 1, 1976 |
Alfred W. Pelletier | January 1, 1976, to July 21, 1980 |
John B. Curcio | July 21, 1980, to 1989 |
Ralph Reins | 1989 to 1990 |
Elios Pascual | 1990 to 1995 |
Pierre Jocou | March 1, 1995, to November 29, 1996 |
Michel Gigou | December 1, 1996, to July 1, 2001 |
Paul Vikner | July 1, 2001, to April 1, 2008 |
Dennis Slagle | April 1, 2008 to present |
Notable appearances in media
A Mack Titan 10-wheeler tank truck will be the vehicle mode for Megatron in Transformers: Dark of the Moon.
See also
References
- ^ Press Release: "Slagle Named Mack President & CEO". - Mack Trucks. - January 15, 2008
- ^ Barron, Richard M. (2009-09-04). "Mack Moves South: Bulldog in Tow". Retrieved 2009-09-04.
- ^ a b News/Events: Mack Plans Restructuring to Increase Competitiveness, Secure Long-Term Leadership Position. - News Releases 2008. - Mack Trucks. - August 14, 2008. - Retrieved: 2008-08-15
- ^ a b Mack History - Mack Trucks.com Official Website
- ^ "Motor Truck Merger". - New York Times. - September 23, 1911. - p.15. - Retrieved: 2008-06-16
- ^ "Railroads Cut Off Short Branch Lines". - New York Times. - January 15, 1922. - p.102
- ^ "Mack to Launch its Biggest Model -- TITAN": Bulldog. - 2008-Volume 1. - p.9. - (Adobe Acrobat *.PDF document). - Retrieved: 2008-06-02
- ^ Product Brochure: Titan. - Mack Trucks. - (Adobe Acrobat *.PDF document). - Retrieved: 2008-06-02
- ^ "Mack unveils natural gas-powered truck". News & Record. 2010-10-26. Retrieved 2010-10-27.
- ^ Mack Bulldog Line. - Mack Trucks. - (Adobe Acrobat *.PDF document). - Retrieved: 2008-06-08
- ^ Products. - Mack Trucks. - Retrieved: 2008-06-08
- ^ New Breed Range. - Mack Trucks Australia. - Retrieved: 2008-06-08
- ^ Hill, Liezel. - "Volvo, Mack team up for SA market". - Engineering News. - July 27, 2005. - Retrieved: 2008-06-08
- ^ "Cape Cod Fire Department:Mack Fire Apparatus". Retrieved 2006-10-04.
- ^ History: 1910-1919. - Mack Trucks. - Retrieved: 2008-06-08
- ^ "Mack Trucks, Inc. Company Overview". - Volvo Group. - (Adobe Acrobat *.PDF document). - Retrieved: 2006-10-31
- ^ History: 1920-1929. - Mack Trucks. - Retrieved: 2008-06-08
External links
- Allentown, Pennsylvania
- Bus manufacturers
- Companies based in Pennsylvania
- Companies established in 1900
- Emergency services equipment makers
- Emergency vehicles
- Mack Trucks
- Motor vehicle manufacturers of the United States
- Trucking industry in the United States
- Truck manufacturers
- Volvo
- Former components of the Dow Jones Industrial Average