Bellingham railway station

Not to be confused with the former Bellingham North Tyne railway station in Northumberland, Billingham railway station in Billingham, County Durham, or Bellingham station in Bellingham, Washington, United States.

Bellingham
Southbound view of the station in May 2011
Bellingham Location of Bellingham in Greater London
Location	Bellingham
Local authority	London Borough of Lewisham
Managed by	Thameslink
Station code(s)	BGM
DfT category	E
Number of platforms	2
Fare zone	3
National Rail annual entry and exit
2014–15	0.796 million
2015–16	0.809 million
2016–17	0.781 million
2017–18	0.800 million
2018–19	0.809 million
Key dates
1 July 1892	Opened
Other information
External links	Departures Facilities
Coordinates	51.43278°N 0.01944°W / 51.43278; -0.01944
London transport portal

Bellingham railway station is in the London Borough of Lewisham in south London. It is in Travelcard Zone 3, and the station and all trains are operated by Thameslink. The station buildings lie on Randlesdown Road in Bellingham; the platforms are below street level.

The station, which lies on what today is known as the Catford Loop, was opened on 1 July 1892. It is 8 miles 73 chains (14.3 km) measured from London Victoria.

Services

Off-peak, all trains at Bellingham are operated by Thameslink. The off peak service in trains per hour is:

• 2 tph to London Blackfriars
• 2 tph to Kentish Town (during the peak hours, these trains continue to Luton)
• 2 tph to Orpington
• 2 tph to Sevenoaks via Swanley

During the morning peak, there are also 3 trains to London Victoria operated by Southeastern.

Preceding station	National Rail			Following station
Catford		Thameslink Catford loop line		Beckenham Hill
Crofton Park		Southeastern Bromley South line Morning Peak Only		Bromley South