British Rail Class 376

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Edgepedia (talk | contribs) at 16:40, 16 March 2010 ({{noreferences}}). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

British Rail Class 376 "Electrostar"
File:Class376interior.jpg
The interior of a Class 376

The Class 376 Suburban Electrostar is a model of electric multiple-unit passenger train manufactured by Bombardier Transportation. It is part of the Electrostar family, which are the most common EMUs introduced since the privatisation of British Rail. The units were ordered by Connex South Eastern, introduced by South Eastern Trains, and are now operated by Southeastern.

Design

It is a derivative of the Class 375 Electrostar designed specifically for use on the high-volume metro routes running south-east from London, England. The changes are mostly focussed on increasing the trains’ capacity and decreasing the time they must spend stopped in station. The Class 376’s doors are wider to allow more passengers to board at once, and are metro-style sliding doors which are faster and more reliable than the Class 375’s plug doors, although they do not provide as much insulation for heating and cooling purposes. Also, no air conditioning is provided, with hopper style windows available for ventilation. In order to provide more standing room, the trains also have fewer seats, more handrails, and no on-board toilets (South Eastern promised to provide additional facilities in their stations to compensate) and are limited to 57 minutes on any single passenger journey as a result.

Class 376 units are five carriages long, and unlike the Class 375, have full-width cabs instead of gangways at the ends of the train; it is therefore not possible to walk between two coupled Class 376 units. The cab front is also smooth and ‘step free’ to reduce the problem of ‘train surfing’ in South London.

Like all new trains in the United Kingdom using third-rail power, one carriage in each unit has a recess in its roof where a pantograph could be fitted, so as to allow for future conversion to overhead AC power.

Although all units are DC only, the class is numbered in the 3xx series normally used for AC and dual-voltage units.

Routes

All Class 376 trains were allocated to Slade Green, but due to the high volume of work at Slade Green, these trains now go to Ramsgate for routine maintenance. They are most commonly seen on routes between London and Dartford, London and Hayes, and London and Orpington.

Fleet details

Class Operator No. Built Year Built Cars per Set Unit nos.
Class 376/0 Southeastern 36 2004-05 5 376001 - 376036

See also

External links