List of Intel processors
This generational and chronological list of Intel microprocessors attempts to present all of Intel's processors from the pioneering 4-bit 4004 (1971) to the present high-end offerings, the 64-bit Itanium 2 (2002) and Intel Core 2 and Xeon 5100 and 7100 series processors (2006). Concise technical data are given for each product.
The 4-bit processors
Intel 4004: first single-chip microprocessor
- Introduced November 15, 1971
- Clock speed 740 kHz[1]
- 0.06 MIPS
- Bus Width 4 bits (multiplexed address/data due to limited pins)
- PMOS
- Number of Transistors 2,300 at 10 µm
- Addressable Memory 640 bytes
- Program Memory 4 KB
- One of the earliest Commercial Microprocessors (cf. Four Phase Systems AL1, F14 CADC)
- Originally designed to be used in Busicom calculator
MCS-4 Family:
- 4004-CPU
- 4001-ROM & 4Bit Port
- 4002-RAM & 4Bit Port
- 4003-10Bit Shift Registr
- 4008-Memory+I/O Interface
- 4009-Memory+I/O Interface
- Introduced 4th Qtr, 1974
- Clock speed of 500 kHz to 740 kHz using 4 to 5.185 MHz crystals
- 0.06 MIPS
- Bus Width 4 bits (multiplexed address/data due to limited pins)
- PMOS
- Number of Transistors 3,000 at 10 µm
- Addressable Memory 640 bytes
- Program Memory 8 KB
- Interrupts
- Enhanced version of 4004
MCS-40 Family:
- 4040-CPU
- 4101-1024-bit (256 x 4) Static RAM w/Separate I/O
- 4201-4 MHz Clock Generator
- 4207/4209/4211-General Purpose Byte I/O Port
- 4265-Programmable General Purpose I/O Device
- 4269-Programmable Keyboard Display Device
- 4289-Standard Memory Interface for MCS-4/40
- 4308-8192-bit (1024 x 8) ROM w/ 4-bit I/O Ports
- 4316-16384-bit (2048 x 8) Static ROM
- 4702-2048-bit (256 x 8) EPROM
- 4801-5.185 MHz Clock Generator Crystal for 4004/4201A or 4040/4201A
The 8-bit processors
- Introduced April 1, 1972
- Clock speed 500 kHz (8008-1: 800 kHz)
- 0.05 MIPS
- Bus Width 8 bits (multiplexed address/data due to limited pins)
- PMOS
- Number of Transistors 3,500 at 10 µm
- Addressable memory 16 KB
- Typical in dumb terminals, general calculators, bottling machines
- Developed in tandem with 4004
- Originally intended for use in the Datapoint 2200 terminal
- Introduced April 1, 1974
- 0.64 MIPS
- Bus Width 8 bits data, 16 bits address
- NMOS
- Addressable memory 64 KB
- 10X the performance of the 8008
- Used in the Altair 8800, Traffic light controller, cruise missile
- Required six support chips versus 20 for the 8008
- Introduced March 1976
- Clock speed 5 MHz
- 0.37 MIPS
- Bus Width 8 bits data, 16 bits address
- Number of Transistors 6,500 at 3 µm
- Assembly language downwards compatible with 8080.
- Used in Toledo scale. Also was used as a computer peripheral controller - modems, harddisks, etc...
- CMOS 80C85 in Mars Sojourner, Radio Shack Model 100 portable.
- High level of integration, operating for the first time on a single 5 volt power supply, from 12 volts previously. Also featured two serial I/O connection,3 maskable interrupts,1 Non-maskable,1 programmable,status,DMA.
MCS-85 Family:
- 8085-CPU
- 8155-RAM+ 3 I/O Ports+Timer
- 8156-RAM+ 3 I/O Ports+Timer
- 8185-SRAM
- 8202-Dynamic RAM Controller
- 8203-Dynamic RAM Controller
- 8205-1 Of 8 Binary Decoder
- 8206-Error Detection & Correction Unit
- 8207-DRAM Controller
- 8210-TTL To MOS Shifter & High Voltage Clock Driver
- 8212-8 Bit I/O Port
- 8216-4 Bit Parallel Bidirectional Bus Driver
- 8218/8219-Bus Controller
- 8222-Dynamic RAM Refresh Controller
- 8226-4 Bit Parallel Bidirectional Bus Driver
- 8231-Arithmetic Processing Unit
- 8232-Floating Point Processor
- 8237-DMA Controller
- 8251-Communication Controller
- 8253-Programmable Interval Timer
- 8254-Programmable Interval Timer
- 8255-Programmable Peripheral Interface
- 8256-Multifunction Support Controller
- 8257-DMA Controller
- 8259-Programmable Interrupt Controller
- 8271-Programmable Floppy Disk Controller
- 8272-Single/Double Density Floppy Disk Controller
- 8273-Programmable HDLC/SDLC Protocol Controller
- 8274-Multi-Protocol Serial Controller
- 8275-CRT Controller
- 8276-Small System CRT Controller
- 8278-Programmable KeyBoard Interface
- 8279-KeyBoard/Display Controller
- 8282-8-bit Non-Inverting Latch with Output Buffer
- 8283-8-bit Inverting Latch with Output Buffer
- 8291-GPIB Talker/Listener
- 8292-GPIB Controller
- 8293-GPIB Transceiver
- 8294-Data Encryption/Decryption Unit+1 O/P Port
- 8295-Dot Matrix Printer Controller
- 8296-GPIB Transceiver
- 8297-GPIB Transceiver
- 8355-16,384-bit (2048 x 8) ROM with I/O
- 8604-4096-bit (512 x 8) PROM
- 8702-2K-bit (265 x 8 ) PROM
- 8755-EPROM+2 I/O Ports
The bit-slice processor
3000 Family
Introduced 3rd Qtr, 1974 Members of the family
- 3001-Microcontrol Unit
- 3002-2-bit Arithmetic Logic Unit slice
- 3003-Look-ahead Carry Generator
- 3205-High-Speed 6-bit Latch
- 3207-Quad Bipolar-to-MOS Level Shifter and Driver
- 3208-Hex Sense Amp and Latch for MOS Memories
- 3210-TTL-to-MOS Level Shifter and High Voltage Clock Driver
- 3211-ECL-to-MOS Level Shifter and High Voltage Clock Driver
- 3212-Multimode Latch Buffer
- 3214-Interrupt Control Unit
- 3216/3226-Parallel,Inverting Bi-Directional Bus Driver
- 3222-Refresh Controller for 4K NMOS DRAMs
- 3232-Address Multiplexer and Refresh Counter for 4K DRAMs
- 3235-Quad Bipolar-to-MOS Driver
- 3242-Address Multiplexer and Refresh Counter for 16K DRAMs
- 3245-Quad Bipolar TTL-to-MOS Level Shifter and Driver for 4K
- 3246-Quad Bipolar ECL-to-MOS Level Shifter and Driver for 4K
- 3404-High-Speed 6-bit Latch
- 3408-Hex Sense Amp and Latch for MOS Memories
Bus Width 2-n bits data/address (depending on number of slices used)
Signal Processor
2900 Family
- 2910-PCM CODEC – µ LAW
- 2911-PCM CODEC – A LAW
- 2912-PCM Line Filters
- 2920-Signal Processor
Digital Clocks Processor
5000 Family
These devices are CMOS technology.
- 5101-1024-bit (256 x 4) Static RAM
- 5201/5202-LCD Decoder-Driver
- 5204-Time Seconds/Date LCD Decoder-Driver
- 5234-Quad CMOS-to-MOS Level Shifter and Driver for 4K NMOS RAMs
- 5235-Quad CMOS TTL-to-MOS Level Shifter and Driver for 4K NMOS
- 5244-Quad CCD Clock Driver
- 5801-Low Power Oscillator-Divider
- 5810-Single Chip LCD Time/Seconds/Date Watch Circuit
Old Memory
1xxx Family
These devices are PMOS technology.
- 1101-256-bit (256 x 1) Static RAM
- 1102-1024-bit (1024 x 1) Dynamic RAM
- 1103-1024-bit (1024 x 1) Dynamic RAM
- 1402-1024-bit (256 x 4) Dynamic Shift Register
- 1403-1024-bit (256 x 4) Dynamic Shift Register
- 1404-1024-bit (256 x 4) Dynamic Shift Register
- 1405-512-bit (512 x 1) Dynamic Recirculating Shift Register
- 1406-200-bit (100 x 2) Dynamic Shift Register
- 1407-200-bit (100 x 2) Dynamic Shift Register (20 KΩ output)
- 1506-200-bit (100 x 2) Dynamic Shift Register
- 1507-200-bit (100 x 2) Dynamic Shift Register (20 KΩ output)
- 1602-2048-bit (256 x 8) Static PROM
- 1702-2048-bit (256 x 8) Static UVEPROM
- S714-2048-bit (256 x 8) Static PROM
2xxx Family
These devices are NMOS technology.
- 2101-1024-bit (256 x 4) Static RAM w/Separate I/O
- 2102-1024-bit (1024 x 1) Static RAM w/Separate I/O
- 2104-4096-bit (4096 x 1) Dynamic RAM
- 2105-1024-bit (1024 x 1) Dynamic RAM
- 2107-4096-bit (4096 x 1) Dynamic RAM
- 2108-8192-bit (8192 x 1) Dynamic RAM
- 2109-8192-bit (8192 x 1) Dynamic RAM
- 2111-1024-bit (256 x 4) Static RAM w/Common I/O
- 2112-1024-bit (256 x 4) Static RAM w/Common I/O
- 2114-4096-bit (1024 x 4) Static RAM w/Common I/O
- 2115-1024-bit (1024 x 1) Static RAM
- 2116-16,384-bit (16,384 x 1) Dynamic RAM
- 2117-16,384-bit (16,384 x 1) Dynamic RAM
- 2118-16,384-bit (16,384 x 1) Dynamic RAM
- 2125-1024-bit (1024 x 1) Static RAM
- 2141-4096-bit (4096 x 1) Static RAM w/Separate I/O
- 2142-4096-bit (1024 x 4) Static RAM w/Common I/O
- 2147-4096-bit (4096 x 1) Static RAM w/Separate I/O
- 2148-4096-bit (1024 x 4) Static RAM w/Common I/O
- 2149-4096-bit (1024 x 4) Static RAM w/Common I/O
- 2308-8192-bit (1024 x 8) Static ROM
- 2316-16,384-bit (2048 x 8) Static ROM
- 2401-2048-bit (1024 x 2) Dynamic Recirculating Shift Register
- 2405-2048-bit (1024 x 2) Dynamic Recirculating Shift Register
- 2416-16384-bit (16384 x 1) CCD Memory
- 2608-8192-bit (1024 x 8) PROM
- 2616-16,384-bit (2048 x 8) Static PROM
- 2704-4096-bit (512 x 8) UVEPROM
- 2708-4096-bit (512 x 8) UVEPROM
- 2716-16384-bit (2048 x 8) UVEPROM
- 2732-32,768-bit (4096 x 8) UVEPROM
- 2758-8192-bit (1024 x 8) UVEPROM w/Single 5V
3xxx Family
These devices are bipolar technology.
- 3301-1024-bit (256 x 4) Static ROM
- 3302-2048-bit (512 x 4) Static ROM
- 3304-4096-bit (1024 x 4 or 512 x 8) Static ROM
- 3322-2048-bit (512 x 4) Static ROM
- 3324-4096-bit (1024 x 4 or 512 x 8) Static ROM
- 3601-1024-bit (256 x 4) PROM
- 3602-2048-bit (512 x 4) PROM
- 3604-4096-bit (512 x 8) PROM
- 3605-4096-bit (1024 x 4) PROM
- 3608-8192-bit (1024 x 8) PROM
- 3621-1024-bit (256 x 4) PROM
- 3622-2048-bit (512 x 4) PROM
- 3624-4096-bit (512 x 8) PROM
- 3625-4096-bit (1024 x 4) PROM
- 3628-8192-bit (1024 x 8) PROM
- 3636-16,384-bit (2048 x 8) PROM
7xxx Family
These devices are magnetic technology.
- 7110-1,048,576-bit Bubble Memory
- 7220-Bubble Memory Controller for Intel 7110 Bubble Memory
- 7230-Current Pulse Generator for Intel 7110 Bubble Memory
- 7242-Dual Formatter/Sense Amplifier for Intel 7110 Bubble
- 7250-Coil Predriver (CPD) for Intel 7110 Bubble Memory
- 7254-Driver Transistor for Intel 7110 Bubble Memory
The 16-bit processors: origin of x86
- Introduced June 8, 1978
- Clock speeds:
- 5 MHz with 0.33 MIPS
- 8 MHz with 0.66 MIPS
- 10 MHz with 0.75 MIPS
- The memory is divided into odd and even banks. It accesses both the banks simultaneuosly in order to read 16 bit of data in one clock cycle.
- Bus Width 16 bits data, 20 bits address
- Number of Transistors 29,000 at 3 µm
- Addressable memory 1 megabyte
- 10X the performance of 8080
- Used in portable computing
- Used segment registers to access more than 64 KB of data at once, bane of programmers' existence for years to come
- Introduced June 1, 1979
- Clock speeds:
- 5 MHz with 0.33 MIPS
- 8 MHz with 0.75 MIPS
- Internal architecture 16 bits
- External bus Width 8 bits data, 20 bits address
- Number of Transistors 29,000 at 3 µm
- Addressable memory 1 megabyte
- Identical to 8086 except for its 8 bit external bus (hence an 8 instead of a 6 at the end)
- Used in IBM PCs and PC clones
iAPX 432 (chronological entry)
- Introduced January 1, 1981
- Multi-chip CPU; Intel's first 32-bit microprocessor
- See main entry
- Introduced 1982
- Used mostly in embedded applications - controllers, point-of-sale systems, terminals, and the like
- Used in several MS-DOS non-PC-Compatible computers including RM Nimbus, Tandy 2000
- Included two timers, a DMA controller, and an interrupt controller on the chip in addition to the processor
- Later renamed the iAPX 186
- A version of the 80186 with an 8-bit external data bus
- Later renamed the iAPX 188
- Introduced February 1, 1982
- Clock speeds:
- 6 MHz with 0.9 MIPS
- 8 MHz, 10 MHz with 1.5 MIPS
- 12.5 MHz with 2.66 MIPS
- 16 MHz, 20 MHz and 25 MHz available.
- Bus Width 16 bits
- Included memory protection hardware to support multitasking operating systems with per-process address space
- Number of Transistors 134,000 at 1.5 µm
- Addressable memory 16 MB
- Added protected-mode features to 8086 with essentially the same instruction set
- 3-6X the performance of the 8086
- Widely used in PC clones at the time
- Can scan the Encyclopædia Britannica in 45 seconds
32-bit processors: the non-x86 microprocessors
- Introduced January 1, 1981 as Intel's first 32-bit microprocessor
- Object/capability architecture
- Microcoded operating system primitives
- One terabyte virtual address space
- Hardware support for fault tolerance
- Two-chip General Data Processor (GDP), consists of 43201 and 43202
- 43203 Interface Processor (IP) interfaces to I/O subsystem
- 43204 Bus Interface Unit (BIU) simplifies building multiprocessor systems
- 43205 Memory Control Unit (MCU)
- Architecture and execution unit internal data paths 32 bit
- Clock speeds:
- 5 MHz
- 7 MHz
- 8 MHz
- Introduced April 5, 1988
- RISC-like 32-bit architecture
- Predominantly used in embedded systems
- Evolved from the capability processor developed for the BiiN joint venture with Siemens
- Many variants identified by two-letter suffixes.
80386SX (chronological entry)
- Introduced June 16, 1988
- See main entry
80376 (chronological entry)
- Introduced January 16, 1989
- See main entry
- Introduced February 27, 1989
- Intel's first superscalar processor
- RISC 32/64-bit architecture, with pipeline characteristics very visible to programmer
- Used in Intel Paragon massively parallel supercomputer
- Introduced August 23, 2000
- 32-bit RISC microprocessor based on the ARM architecture
- Many variants, such as the PXA2xx applications processors, IOP3xx I/O processors and IXP2xxx and IXP4xx network processors.
32-bit processors: the 80386 range
- Introduced October 17, 1985
- Clock speeds:
- Bus Width 32 bits
- Number of Transistors 275,000 at 1 µm
- Addressable memory 4 GB
- Virtual memory 64 TB
- First x86 chip to handle 32-bit data sets
- Reworked and expanded memory protection support including paged virtual memory and virtual-86 mode, features required by Windows 95 and OS/2 Warp
- Used in Desktop computing
- Can address enough memory to manage an eight-page history of every person on earth
- Can scan the Encyclopædia Britannica in 12.5 seconds
80960 (i960) (chronological entry)
- Introduced April 5, 1988
- See main entry
- Introduced June 16, 1988
- Clock speeds:
- 16 MHz with 2.5 MIPS
- 20 MHz with 2.5 MIPS, 25 MHz with 2.7 MIPS, introduced 25 January 1989
- 33 MHz with 2.9 MIPS, introduced 26 October 1992
- Internal architecture 32 bits
- External data bus width 16 bits
- External address bus width 24 bits
- Number of Transistors 275,000 at 1 µm
- Addressable memory 16 MB
- Virtual memory 1 TB
- Narrower buses enable low-cost 32-bit processing
- Used in entry-level desktop and portable computing
- Introduced January 16, 1989; Discontinued June 15, 2001
- Variant of 386 intended for embedded systems
- No "real mode", starts up directly in "protected mode"
- Replaced by much more successful 80386EX from 1994
80860 (i860) (chronological entry)
- Introduced February 27, 1989
- See main entry
80486DX (chronological entry)
- Introduced April 10, 1989
- See main entry
- Introduced October 15, 1990
- Clock speeds:
- 20 MHz with 4.21 MIPS
- 25 MHz with 5.3 MIPS, introduced 30 September 1991
- Internal architecture 32 bits
- External bus width 16 bits
- Number of Transistors 855,000 at 1 µm
- Addressable memory 4 GB
- Virtual memory 1 TB
- First chip specifically made for portable computers because of low power consumption of chip
- Highly integrated, includes cache, bus, and memory controllers
80486SX/DX2/SL, Pentium, 80486DX4 (chronological entries)
- Introduced 1991–1994
- See main entries
- Introduced August 1994
- Variant of 80386SX intended for embedded systems
- Static core, i.e. may run as slowly (and thus, power efficiently) as desired, down to full halt
- On-chip peripherals:
- Clock and power mgmt
- Timers/counters
- Watchdog timer
- Serial I/O units (sync and async) and parallel I/O
- DMA
- RAM refresh
- JTAG test logic
- Significantly more successful than the 80376
- Used aboard several orbiting satellites and microsatellites
- Used in NASA's FlightLinux project
32-bit processors: the 80486 range
- Introduced April 10, 1989
- Clock speeds:
- Bus Width 32 bits
- Number of Transistors 1.2 million at 1 µm; the 50 MHz was at 0.8 µm
- Addressable memory 4 GB
- Virtual memory 1 TB
- Level 1 cache of 8 KB on chip
- Math coprocessor on chip
- 50X performance of the 8088
- Used in Desktop computing and servers
- Family 4 model 3
80386SL (chronological entry)
- Introduced October 15, 1990
- See main entry
- Introduced April 22, 1991
- Clock speeds:
- 16 MHz with 13 MIPS
- 20 MHz with 16.5 MIPS, introduced 16 September 1991
- 25 MHz with 20 MIPS (12 SPECint92), introduced 16 September 1991
- 33 MHz with 27 MIPS (15.86 SPECint92), introduced 21 September 1992
- Bus Width 32 bits
- Number of Transistors 1.185 million at 1 µm and 900,000 at 0.8 µm
- Addressable memory 4 GB
- Virtual memory 1 TB
- Identical in design to 486DX but without math coprocessor. The first version was an 80486DX with disabled mathco in the chip and different pin configuration. If the user needed math co capabilities, he must add 487SX which was actually an 486DX with different pin configuration to prevent the user from installing an 486DX instead of 487SX, so with this configuration 486SX+487SX you had 2 identical CPU's with only 1 turned on)
- Used in low-cost entry to 486 CPU desktop computing
- Upgradable with the Intel OverDrive processor
- Family 4 model 2
- Introduced November 9, 1992
- Clock speeds:
- 20 MHz with 15.4MIPS
- 25 MHz with 19 MIPS
- 33 MHz with 25 MIPS
- Bus Width 32 bits
- Number of Transistors 1.4 million at 0.8 µm
- Addressable memory 4 GB
- Virtual memory 1 TB
- Used in notebook computers
- Family 4 model 3
Pentium (chronological entry)
- Introduced March 22, 1993
- See main entry
- Introduced March 7, 1994
- Clock speeds:
- 75 MHz with 53 MIPS (41.3 SPECint92, 20.1 SPECfp92 on Micronics M4P 256 KB L2)
- 100 MHz with 70.7 MIPS (54.59 SPECint92, 26.91 SPECfp92 on Micronics M4P 256 KB L2)
- Number of Transistors 1.6 million at 0.6 µm
- Bus width 32 bits
- Addressable memory 4 GB
- Virtual memory 64 TB
- Pin count 168 PGA Package, 208 sq ftP Package
- Die size 345 mm²
- Used in high performance entry-level desktops and value notebooks
- Family 4 model 8
32-bit processors: the Pentium ("I")
Pentium ("Classic")
- Bus width 64 bits
- System bus speed 60 or 66 MHz
- Address bus 32 bits
- Addressable Memory 4 GB
- Virtual Memory 64 TB
- Superscalar architecture brought 5X the performance of the 33 MHz 486DX processor
- Runs on 5 volts
- Used in desktops
- 16 KB of L1 cache
- P5 - 0.8 µm process technology
- Introduced March 22, 1993
- Number of transistors 3.1 million
- Socket 4 273 pin PGA processor package
- Package dimensions 2.16" x 2.16"
- Family 5 model 1
- Variants
- 60 MHz with 100 MIPS (70.4 SPECint92, 55.1 SPECfp92 on Xpress 256 KB L2)
- 66 MHz with 112 MIPS (77.9 SPECint92, 63.6 SPECfp92 on Xpress 256 KB L2)
- P54 - 0.6 µm process technology
- P54C - 0.35 µm process technology
80486DX4 (chronological entry)
- Introduced March 7, 1994
- See main entry
80386EX (Intel386 EX) (chronological entry)
- Introduced August 1994
- See main entry
Pentium Pro (chronological entry)
- Introduced November 1995
- See main entry
- P55C - 0.35 µm process technology
- Introduced January 8, 1997
- Intel MMX instructions
- Socket 7 296/321 pin PGA (pin grid array) package
- 32 KB L1 cache
- Number of transistors 4.5 million
- System bus speed 66 MHz
- Basic P55C is family 5 model 4, mobile are family 5 model 7 and 8
- Variants
- 166 MHz Introduced January 8, 1997
- 200 MHz Introduced January 8, 1997
- 233 MHz Introduced June 2, 1997
- 166 MHz (Mobile) Introduced January 12, 1998
- 200 MHz (Mobile) Introduced September 8, 1997
- 233 MHz (Mobile) Introduced September 8, 1997
- 266 MHz (Mobile) Introduced January 12, 1998
- 300 MHz (Mobile) Introduced January 7, 1999
- Introduced November 1, 1995
- Precursor to Pentium II and III
- Primarily used in server systems
- Socket 8 processor package (387 pins) (Dual SPGA)
- Number of transistors 5.5 million
- Family 6 model 1
- 0.6 µm process technology
- 16 KB L1 cache
- 256 KB integrated L2 cache
- 60 MHz system bus speed
- Variants
- 150 MHz
- 0.35 µm process technology, or 0.35 µm CPU with 0.6 µm L2 cache
- Number of transistors 5.5 million
- 512 KB or 256 KB integrated L2 cache
- 60 or 66 MHz system bus speed
- Variants
- 166 MHz (66 MHz bus speed, 512 KB 0.35 µm cache) Introduced November 1, 1995
- 180 MHz (60 MHz bus speed, 256 KB 0.6 µm cache) Introduced November 1, 1995
- 200 MHz (66 MHz bus speed, 256 KB 0.6 µm cache) Introduced November 1, 1995
- 200 MHz (66 MHz bus speed, 512 KB 0.35 µm cache) Introduced November 1, 1995
- 200 MHz (66 MHz bus speed, 1 MB 0.35 µm cache) Introduced August 18, 1997
- Introduced May 7, 1997
- Pentium Pro with MMX and improved 16-bit performance
- 242-pin Slot 1 (SEC) processor package
- Number of transistors 7.5 million
- 32 KB L1 cache
- 512 KB ½ speed external L2 cache
- The only Pentium II that did not have the cache at ½ speed of the core was the Pentium II 450 PE.
- Klamath - 0.35 µm process technology (233, 266, 300 MHz)
- Deschutes - 0.25 µm process technology (333, 350, 400, 450 MHz)
- Introduced January 26, 1998
- 66 MHz system bus speed (333 MHz variant), 100 MHz system bus speed for all models after
- Family 6 model 5
- Variants
- 333 MHz Introduced January 26, 1998
- 350 MHz Introduced April 15, 1998
- 400 MHz Introduced April 15, 1998
- 450 MHz Introduced August 24, 1998
- 233 MHz (Mobile) Introduced April 2, 1998
- 266 MHz (Mobile) Introduced April 2, 1998
- 333 MHz Pentium II Overdrive processor for Socket 8 Introduced August 10, 1998; Engineering Sample Photo
- 300 MHz (Mobile) Introduced September 9, 1998
- 333 MHz (Mobile)
Celeron (Pentium II-based)
- Covington - 0.25 µm process technology
- Mendocino - 0.25 µm process technology
- Introduced August 24, 1998
- 242-pin Slot 1 SEPP (Single Edge Processor Package), Socket 370 PPGA package
- Number of transistors 19 million
- 66 MHz system bus speed
- 32 KB L1 cache
- 128 KB integrated cache
- Family 6 model 6
- Variants
- 300 A MHz Introduced August 24, 1998
- 333 MHz Introduced August 24, 1998
- 366 MHz Introduced January 4, 1999
- 400 MHz Introduced January 4, 1999
- 433 MHz Introduced March 22, 1999
- 466 MHz
- 500 MHz Introduced August 2, 1999
- 533 MHz Introduced January 4, 2000
- 266 MHz (Mobile)
- 300 MHz (Mobile)
- 333 MHz (Mobile) Introduced April 5, 1999
- 366 MHz (Mobile)
- 400 MHz (Mobile)
- 433 MHz (Mobile)
- 450 MHz (Mobile) Introduced February 14, 2000
- 466 MHz (Mobile)
- 500 MHz (Mobile) Introduced February 14, 2000
Pentium II Xeon (chronological entry)
- Introduced June 29, 1998
- See main entry
- Katmai - 0.25 µm process technology
- Introduced February 26, 1999
- Improved PII, i.e. P6-based core, now including Streaming SIMD Extensions (SSE)
- Number of transistors 9.5 million
- 512 KB ½ speed L2 External cache
- 242-pin Slot 1 SECC2 (Single Edge Contact cartridge 2) processor package
- System Bus Speed 100 MHz, 133 MHz (B-models)
- Family 6 model 7
- Variants
- 450 MHz Introduced February 26, 1999
- 500 MHz Introduced February 26, 1999
- 550 MHz Introduced May 17, 1999
- 600 MHz Introduced August 2, 1999
- 533 MHz Introduced (133 MHz bus speed) September 27, 1999
- 600 MHz Introduced (133 MHz bus speed) September 27, 1999
- Coppermine - 0.18 µm process technology
- Introduced October 25, 1999
- Number of transistors 28.1 million
- 256 KB Advanced Transfer L2 Cache (Integrated)
- 242-pin Slot-1 SECC2 (Single Edge Contact cartridge 2) processor package, 370-pin FC-PGA (Flip-chip pin grid array) package
- System Bus Speed 100 MHz (E-models), 133 MHz (EB models)
- Family 6 model 8
- Variants
- 500 MHz (100 MHz bus speed)
- 533 MHz
- 550 MHz (100 MHz bus speed)
- 600 MHz
- 600 MHz (100 MHz bus speed)
- 650 MHz (100 MHz bus speed) Introduced October 25, 1999
- 667 MHz Introduced October 25, 1999
- 700 MHz (100 MHz bus speed) Introduced October 25, 1999
- 733 MHz Introduced October 25, 1999
- 750 MHz (100 MHz bus speed) Introduced December 20, 1999
- 800 MHz (100 MHz bus speed) Introduced December 20, 1999
- 800 MHz Introduced December 20, 1999
- 850 MHz (100 MHz bus speed) Introduced March 20, 2000
- 866 MHz Introduced March 20, 2000
- 933 MHz Introduced May 24, 2000
- 1000 MHz Introduced March 8, 2000 (Not widely available at time of release)
- 1100 MHz
- 1133 MHz (first version recalled, later re-released)
- 400 MHz (Mobile) Introduced October 25, 1999
- 450 MHz (Mobile) Introduced October 25, 1999
- 500 MHz (Mobile) Introduced October 25, 1999
- 600 MHz (Mobile) Introduced January 18, 2000
- 650 MHz (Mobile) Introduced January 18, 2000
- 700 MHz (Mobile) Introduced April 24, 2000
- 750 MHz (Mobile) Introduced June 19, 2000
- 800 MHz (Mobile) Introduced September 25, 2000
- 850 MHz (Mobile) Introduced September 25, 2000
- 900 MHz (Mobile) Introduced March 19, 2001
- 1000 MHz (Mobile) Introduced March 19, 2001
- Tualatin - 0.13 µm process technology
- Introduced July 2001
- Number of transistors 28.1 million
- 32 KB L1 cache
- 256 KB or 512 KB Advanced Transfer L2 cache (Integrated)
- 370-pin FC-PGA (Flip-chip pin grid array) package
- 133 MHz system bus speed
- Family 6 model 11
- Variants
- 1133 MHz (256 KB L2)
- 1133 MHz (512 KB L2)
- 1200 MHz
- 1266 MHz (512 KB L2)
- 1333 MHz
- 1400 MHz (512 KB L2)
Pentium II and III Xeon
- PII Xeon
- PIII Xeon
- Introduced October 25, 1999
- Number of transistors: 9.5 million at 0.25 µm or 28 million at 0.18 µm)
- L2 cache is 256 KB, 1 MB, or 2 MB Advanced Transfer Cache (Integrated)
- Processor Package Style is Single Edge Contact Cartridge (S.E.C.C.2) or SC330
- System Bus Speed 133 MHz (256 KB L2 cache) or 100 MHz (1 - 2 MB L2 cache)
- System Bus Width 64 bit
- Addressable memory 64 GB
- Used in two-way servers and workstations (256 KB L2) or 4- and 8-way servers (1 - 2 MB L2)
- Family 6 model 10
- Variants
- 500 MHz (0.25 µm process) Introduced March 17, 1999
- 550 MHz (0.25 µm process) Introduced August 23, 1999
- 600 MHz (0.18 µm process, 256 KB L2 cache) Introduced October 25, 1999
- 667 MHz (0.18 µm process, 256 KB L2 cache) Introduced October 25, 1999
- 733 MHz (0.18 µm process, 256 KB L2 cache) Introduced October 25, 1999
- 800 MHz (0.18 µm process, 256 KB L2 cache) Introduced January 12, 2000
- 866 MHz (0.18 µm process, 256 KB L2 cache) Introduced April 10, 2000
- 933 MHz (0.18 µm process, 256 KB L2 cache)
- 1000 MHz (0.18 µm process, 256 KB L2 cache) Introduced August 22, 2000
- 700 MHz (0.18 µm process, 1 - 2 MB L2 cache) Introduced May 22, 2000
Celeron (Pentium III Coppermine-based)
- Coppermine-128 - 0.18 µm process technology
- Introduced March,2000
- Streaming SIMD Extensions (SSE)
- Socket 370 PPGA processor package
- Number of transistors 28.1 million
- 66 MHz system bus speed, 100 MHz system bus speed on January 3, 2001
- 32 KB L1 cache
- 128 KB Advanced Transfer L2 cache
- Family 6 model 8
- Variants
- 533 MHz
- 566 MHz
- 600 MHz
- 633 MHz Introduced June 26, 2000
- 667 MHz Introduced June 26, 2000
- 700 MHz Introduced June 26, 2000
- 733 MHz Introduced November 13, 2000
- 766 MHz Introduced November 13, 2000
- 800 MHz
- 850 MHz Introduced April 9, 2001
- 900 MHz Introduced July 2, 2001
- 950 MHz Introduced August 31, 2001
- 1000 MHz Introduced August 31, 2001
- 1100 MHz Introduced August 31, 2001
- 1200 MHz Introduced October 2, 2001
- 1300 MHz Introduced January 3, 2002
- 550 MHz (Mobile)
- 600 MHz (Mobile) Introduced June 19, 2000
- 650 MHz (Mobile) Introduced June 19, 2000
- 700 MHz (Mobile) Introduced September 25, 2000
- 750 MHz (Mobile) Introduced March 19, 2001
- 800 MHz (Mobile)
- 850 MHz (Mobile) Introduced July 2, 2001
- 600 MHz (LV Mobile)
- 500 MHz (ULV Mobile) Introduced January 30, 2001
- 600 MHz (ULV Mobile)
XScale (chronological entry)
- Introduced August 23, 2000
- See main entry
Pentium 4 (not 4EE, 4E, 4F), Itanium, P4-based Xeon, Itanium 2 (chronological entries)
- Introduced April 2000 – July 2002
- See main entries
Celeron (Pentium III Tualatin-based)
- Tualatin Celeron - 0.13 µm process technology
- 32 KB L1 cache
- 256 KB Advanced Transfer L2 cache
- 100 MHz system bus speed
- Family 6 model 11
- Variants
- 1.0 GHz
- 1.1 GHz
- 1.2 GHz
- 1.3 GHz
- 1.4 GHz
- Banias 0.13 µm process technology
- Introduced March 2003
- 64 KB L1 cache
- 1 MB L2 cache (integrated)
- Based on Pentium III core, with SSE2 SIMD instructions and deeper pipeline
- Number of transistors 77 million
- Micro-FCPGA, Micro-FCBGA processor package
- Heart of the Intel mobile "Centrino" system
- 400 MHz Netburst-style system bus
- Family 6 model 9
- Variants
- 900 MHz (Ultra low voltage)
- 1.0 GHz (Ultra low voltage)
- 1.1 GHz (Low voltage)
- 1.2 GHz (Low voltage)
- 1.3 GHz
- 1.4 GHz
- 1.5 GHz
- 1.6 GHz
- 1.7 GHz
- Dothan 0.09 µm (90 nm) process technology
- Introduced May 2004
- 2 MB L2 cache
- Revised data prefetch unit
- 400 MHz Netburst-style system bus
- 21W TDP
- Variants
- 1.00 GHz (Pentium M 723) (Ultra low voltage, 5W TDP)
- 1.10 GHz (Pentium M 733) (Ultra low voltage, 5W TDP)
- 1.20 GHz (Pentium M 753) (Ultra low voltage, 5W TDP)
- 1.30 GHz (Pentium M 718) (Low voltage, 10W TDP)
- 1.40 GHz (Pentium M 738) (Low voltage, 10W TDP)
- 1.50 GHz (Pentium M 758) (Low voltage, 10W TDP)
- 1.60 GHz (Pentium M 778) (Low voltage, 10W TDP)
- 1.40 GHz (Pentium M 710)
- 1.50 GHz (Pentium M 715)
- 1.60 GHz (Pentium M 725)
- 1.70 GHz (Pentium M 735)
- 1.80 GHz (Pentium M 745)
- 2.00 GHz (Pentium M 755)
- 2.10 GHz (Pentium M 765)
- Dothan 533 0.09 µm (90 nm) process technology
- Introduced Q1 2005
- Same as Dothan except with a 533 MHz NetBurst-style system bus and 27W TDP
- Variants
- 1.60 GHz (Pentium M 730)
- 1.73 GHz (Pentium M 740)
- 1.86 GHz (Pentium M 750)
- 2.00 GHz (Pentium M 760)
- 2.13 GHz (Pentium M 770)
- 2.26 GHz (Pentium M 780)
- Stealey 0.09 µm (90 nm) process technology
- Introduced Q2 2007
- 512 KB L2, 3W TDP
- Variants
- 600 MHz (A100)
- 800 MHz (A110)
- Banias-512 0.13 µm process technology
- Dothan-1024 90 nm process technology
- 64 KB L1 cache
- 1 MB L2 cache (integrated)
- SSE2 SIMD instructions
- No SpeedStep technology, is not part of the 'Centrino' package
- Variants
- 350 - 1.30 GHz
- 350J - 1.30 GHz, with Execute Disable bit
- 360 - 1.40 GHz
- 360J - 1.40 GHz, with Execute Disable bit
- 370 - 1.50 GHz, with Execute Disable bit
- Family 6, Model 13, Stepping 8[2]
- 380 - 1.60 GHz, with Execute Disable bit
- 390 - 1.70 GHz, with Execute Disable bit
- Yonah-1024 65 nm process technology
- 64 KB L1 cache
- 1 MB L2 cache (integrated)
- SSE3 SIMD instructions, 533 MHz front-side bus, execute-disable bit
- No SpeedStep technology, is not part of the 'Centrino' package
- Variants
- 410 - 1.46 GHz
- 420 - 1.60 GHz,
- 423 - 1.06 GHz (ultra low voltage)
- 430 - 1.73 GHz
- 440 - 1.86 GHz
- 443 - 1.20 GHz (ultra low voltage)
- 450 - 2.00 GHz
- Merom-1024 65 nm process technology
- Yonah 0.065 µm (65 nm) process technology
- Introduced January 2006
- 667 MHz frontside bus
- 2 MB (Shared on Duo) L2 cache
- SSE3 SIMD instructions
- 31W TDP (T**** versions)
- Variants:
- Intel Core Duo T2700 2.33 GHz
- Intel Core Duo T2600 2.16 GHz
- Intel Core Duo T2500 2.00 GHz
- Intel Core Duo T2400 1.83 GHz
- Intel Core Duo T2300 1.66 GHz
- Intel Core Duo T2050 1.60 GHz
- Intel Core Duo L2500 1.83 GHz (Low voltage, 15W TDP)
- Intel Core Duo L2400 1.66 GHz (Low voltage, 15W TDP)
- Intel Core Duo L2300 1.50 GHz (Low voltage, 15W TDP)
- Intel Core Duo U2500 1.20 GHz (Ultra low voltage, 9W TDP)
- Intel Core Solo T1350 1.86 GHz
- Intel Core Solo T1300 1.66 GHz
- Intel Core Solo T1200 1.50 GHz [3]
Dual-Core Xeon LV
- Sossaman 0.065 µm (65 nm) process technology
- Introduced March 2006
- Based on Yonah core, with SSE3 SIMD instructions
- 667 MHz frontside bus
- 2 MB Shared L2 cache
- Variants
- 2.0 GHz
- 0.065 µm (65 nm) process technology
- 533 MHz frontside bus
- 1 MB Shared L2 cache
- SSE3 SIMD instructions
- Variants:
- Pentium dual-core T2080 1.73 GHz
- Pentium dual-core T2060 1.60 GHz
32-bit processors: NetBurst microarchitecture
- 0.18 µm process technology (1.40 and 1.50 GHz)
- Introduced November 20, 2000
- L2 cache was 256 KB Advanced Transfer Cache (Integrated)
- Processor Package Style was PGA423, PGA478
- System Bus Speed 400 MHz
- SSE2 SIMD Extensions
- Number of Transistors 42 million
- Used in desktops and entry-level workstations
- 0.18 µm process technology (1.7 GHz)
- 0.18 µm process technology (1.6 and 1.8 GHz)
- 0.18 µm process technology Willamette (1.9 and 2.0 GHz)
- Family 15 model 1
- Pentium 4 (2 GHz, 2.20 GHz)
- Pentium 4 (2.4 GHz)
- 0.13 µm process technology Northwood A (1.7, 1.8, 1.9, 2, 2.2, 2.4, 2.5, 2.6, 2.8(OEM),3.0(OEM) GHz)
- Improved branch prediction and other microcodes tweaks
- 512 KB integrated L2 cache
- Number of transistors 55 million
- 400 MHz system bus.
- Family 15 model 2
- 0.13 µm process technology Northwood B (2.26, 2.4, 2.53, 2.66, 2.8, 3.06 GHz)
- 533 MHz system bus. (3.06 includes Intel's hyper threading technology).
- 0.13 µm process technology Northwood C (2.4, 2.6, 2.8, 3.0, 3.2, 3.4 GHz)
- 800 MHz system bus (all versions include Hyper Threading)
- 6500 to 10000 MIPS
Itanium (chronological entry)
- Introduced 2001
- See main entry
- Official designation now Xeon, i.e. not "Pentium 4 Xeon"
- Xeon 1.4, 1.5, 1.7 GHz
- Introduced May 21, 2001
- L2 cache was 256 KB Advanced Transfer Cache (Integrated)
- Processor Package Style was Organic Lan Grid Array 603 (OLGA 603)
- System Bus Speed 400 MHz
- SSE2 SIMD Extensions
- Used in high-performance and mid-range dual processor enabled workstations
- Xeon 2.0 GHz and up to 3.6 GHz
- Introduced September 25, 2001
Itanium 2 (chronological entry)
- Introduced July 2002
- See main entry
Mobile Pentium 4-M
- 0.13 µm process technology
- 55 million transistors
- cache L2 512 KB
- BUS a 400 MHz
- Supports up to 1 GB of DDR 266 MHz Memory
- Supports ACPI 2.0 and APM 1.2 System Power Management
- 1.3 V - 1.2 V (SpeedStep)
- Power: 1.2 GHz 20.8 W, 1.6 GHz 30 W, 2.6 GHz 35 W
- Sleep Power 5 W (1.2 V)
- Deeper Sleep Power = 2.9 W (1.0 V)
- 1.40 GHz - 23 April 2002
- 1.50 GHz - 23 April 2002
- 1.60 GHz - 4 March 2002
- 1.70 GHz - 4 March 2002
- 1.80 GHz - 23 April 2002
- 1.90 GHz - 24 June 2002
- 2.00 GHz - 24 June 2002
- 2.20 GHz - 16 September 2002
- 2.40 GHz - 14 January 2003
- 2.40 GHz - 14 January 2003
- 2.50 GHz - 16 April 2003
- 2.60 GHz - 11 June 2003
- Introduced September 2003
- EE = "Extreme Edition"
- Built from the Xeon's "Gallatin" core, but with 2 MB cache
Pentium 4E
- Introduced February 2004
- built on 0.09 µm (90 nm) process technology Prescott (2.4A, 2.8, 2.8A, 3.0, 3.2, 3.4, 3.6, 3.8) 1 MB L2 cache
- 533 MHz system bus (2.4A and 2.8A only)
- Number of Transistors 125 million on 1 MB Models
- Number of Transistors 169 million on 2 MB Models
- 800 MHz system bus (all other models)
- Hyper-Threading support is only available on CPUs using the 800 MHz system bus.
- The processor's integer instruction pipeline has been increased from 20 stages to 31 stages, which theoretically allows for even greater clock speeds.
- 7500 to 11000 MIPS
- LGA-775 versions are in the 5xx series (32-bit) and 5x1 series (with Intel 64)
- The 6xx series has 2 MB L2 cache and Intel 64
Pentium 4F
- Introduced Spring 2004
- same core as 4E, "Prescott"
- 3.2–3.6 GHz
- starting with the D0 stepping of this processor, Intel 64 64-bit extensions has also been incorporated
64-bit processors: IA-64
- New instruction set, not at all related to x86.
- Before the feature was eliminated (Montecito, July 2006) IA-64 processors supported 32-bit x86 in hardware, but slowly.
- Released July 2002
- 900 MHz and 1 GHz
Pentium M (chronological entry)
- Introduced March 2003
- See main entry
Pentium 4EE, 4E (chronological entries)
- Introduced September 2003, February 2004, respectively
- See main entries
64-bit processors: Intel64 - NetBurst
- Intel® Extended Memory 64 Technology
- Mostly compatible with AMD's AMD64 architecture
- Introduced Spring 2004, with the Pentium 4F (D0 and later P4 steppings)
Pentium 4F, D0 and later steppings
- Starting with the D0 stepping of this processor, x86-64 extensions are supported
- Dual-core microprocessor
- No Hyper-Threading
- 800(4x200) MHz front side bus
- Smithfield - 90 nm process technology (2.8–3.4 GHz)
- Introduced May 26 2005
- 2.8–3.4 GHz (model numbers 820-840)
- Number of Transistors 230 million
- 1 MB x 2 (non-shared, 2 MB total) L2 cache
- Cache coherency between cores requires communication over the FSB
- Performance increase of 60% over similarly clocked Prescott
- 2.66 GHz (533 MHz FSB) Pentium D 805 introduced December 2005
- Presler - 65 nm process technology (2.8–3.6 GHz)
- Introduced January 16 2006
- 2.8–3.6 GHz (model numbers 920-960)
- Number of Transistors 376 million
- 2 MB x 2 (non-shared, 4 MB total) L2 cache
- Dual-core microprocessor
- Enabled Hyper-Threading
- 1066(4x266) MHz front side bus
- Smithfield - 90 nm process technology (3.2 GHz)
- Variants
- Pentium 840 EE - 3.20 GHz (2 x 1 MB L2)
- Variants
- Presler - 65 nm process technology (3.46, 3.73)
- 2 MB x 2 (non-shared, 4 MB total) L2 cache
- Variants
- Pentium 955 EE - 3.46 GHz
- Pentium 965 EE - 3.73 GHz
- Nocona
- Introduced 2004
- Irwindale
- Introduced 2004
- Cranford
- Introduced April 2005
- MP version of Nocona
- Potomac
- Introduced April 2005
- Cranford with 8 MB of L3 cache
- Paxville DP (2.8 GHz)
- Introduced October 10, 2005
- Dual-core version of Irwindale, with 4 MB of L2 Cache (2 MB per core)
- 2.8 GHz
- 800 MT/s front side bus
- Paxville MP - 90 nm process (2.67 - 3.0 GHz)
- Introduced November 1, 2005
- Dual-Core Xeon 7000 series
- MP-capable version of Paxville DP
- 2 MB of L2 Cache (1 MB per core) or 4 MB of L2 (2 MB per core)
- 667 MT/s FSB or 800 MT/s FSB
- Dempsey - 65 nm process (2.67 - 3.73 GHz)
- Tulsa - 65 nm process (2.5 - 3.4 GHz)
64-bit processors: Intel64 - Intel Core microarchitecture
- Woodcrest - 65 nm process technology
- Server and Workstation CPU (SMP support for dual CPU system)
- Introduced June 26 2006
- Dual-Core
- Intel Virtualization Technology, multiple OS support
- EIST (Enhanced Intel SpeedStep Technology) in 5140, 5148LV, 5150, 5160
- Execute Disable Bit
- LaGrande Technology, enhanced security hardware extensions
- SSSE3 SIMD instructions
- iAMT2 (Intel Active Management Technology), remotely manage computers
- Variants
- Xeon 5160 - 3.00 GHz (4 MB L2, 1333 MHz FSB, 80 W)
- Xeon 5150 - 2.66 GHz (4 MB L2, 1333 MHz FSB, 65 W)
- Xeon 5140 - 2.33 GHz (4 MB L2, 1333 MHz FSB, 65 W)
- Xeon 5130 - 2.00 GHz (4 MB L2, 1333 MHz FSB, 65 W)
- Xeon 5120 - 1.86 GHz (4 MB L2, 1066 MHz FSB, 65 W)
- Xeon 5110 - 1.60 GHz (4 MB L2, 1066 MHz FSB, 65 W)
- Xeon 5148LV - 2.33 GHz (4 MB L2, 1333 MHz FSB, 40 W) -- Low Voltage Edition
- Clovertown - 65 nm process technology
- Server and Workstation CPU (SMP support for dual CPU system)
- Introduced Dec 13th 2006
- Quad Core
- Intel Virtualization Technology, multiple OS support
- EIST (Enhanced Intel SpeedStep Technology) in E5365, L5335
- Execute Disable Bit
- LaGrande Technology, enhanced security hardware extensions
- SSSE3 SIMD instructions
- iAMT2 (Intel Active Management Technology), remotely manage computers
- Variants
- Xeon X5355 - 2.66 GHz (2x4 MB L2, 1333 MHz FSB, 105 W)
- Xeon E5345 - 2.33 GHz (2x4 MB L2, 1333 MHz FSB, 80 W)
- Xeon E5335 - 2.00 GHz (2x4 MB L2, 1333 MHz FSB, 80 W)
- Xeon E5320 - 1.86 GHz (2x4 MB L2, 1066 MHz FSB, 65 W)
- Xeon E5310 - 1.60 GHz (2x4 MB L2, 1066 MHz FSB, 65 W)
- Xeon L5320 - 1.86 GHz (2x4 MB L2, 1066 MHz FSB, 40 W)-- Low Voltage Edition
- Conroe - 65 nm process technology
- Desktop CPU (SMP support restricted to 2 CPUs)
- Two CPUs in one package
- Introduced July 27, 2006
- SSSE3 SIMD instructions
- Number of Transistors 291 Million on 4 MB Models
- Number of Transistors 167 Million on 2 MB Models
- Intel Virtualization Technology, multiple OS support
- LaGrande Technology, enhanced security hardware extensions
- Execute Disable Bit
- EIST (Enhanced Intel SpeedStep Technology)
- iAMT2 (Intel Active Management Technology), remotely manage computers
- LGA775
- Variants
- Core 2 Duo E6850 - 3.00 GHz (4 MB L2, 1333 MHz FSB)
- Core 2 Duo E6800 - 2.93 GHz (4 MB L2, 1066 MHz FSB)
- Core 2 Duo E6750 - 2.67 GHz (4 MB L2, 1333 MHz FSB)
- Core 2 Duo E6700 - 2.67 GHz (4 MB L2, 1066 MHz FSB)
- Core 2 Duo E6600 - 2.40 GHz (4 MB L2, 1066 MHz FSB)
- Core 2 Duo E6550 - 2.33 GHz (4 MB L2, 1333 MHz FSB)
- Core 2 Duo E6420 - 2.13 GHz (4 MB L2, 1066 MHz FSB)
- Core 2 Duo E6400 - 2.13 GHz (2 MB L2, 1066 MHz FSB)
- Core 2 Duo E6320 - 1.86 GHz (4 MB L2, 1066 MHz FSB)
- Core 2 Duo E6300 - 1.86 GHz (2 MB L2, 1066 MHz FSB)
- Core 2 Duo E4500 - 2.20 GHz (2 MB L2, 800 MHz FSB, no VT)
- Core 2 Duo E4400 - 2.00 GHz (2 MB L2, 800 MHz FSB, no VT)
- Core 2 Duo E4300 - 1.80 GHz (2 MB L2, 800 MHz FSB, no VT)
- Conroe XE - 65 nm process technology
- Merom - 65 nm process technology
- Mobile CPU (SMP support restricted to 2 CPUs)
- Introduced July 27, 2006
- same features as Conroe
- Socket M
- Variants
- Core 2 Duo T7700 - 2.40 GHz (4 MB L2, 800 MHz FSB) (Santa Rosa platform)
- Core 2 Duo T7600 - 2.33 GHz (4 MB L2, 667 MHz FSB)
- Core 2 Duo T7500 - 2.20 GHz (4 MB L2, 800 MHz FSB)
- Core 2 Duo T7400 - 2.16 GHz (4 MB L2, 667 MHz FSB)
- Core 2 Duo T7300 - 2.00 GHz (4 MB L2, 800 MHz FSB)
- Core 2 Duo T7200 - 2.00 GHz (4 MB L2, 667 MHz FSB)
- Core 2 Duo T7100 - 1.80 GHz (2 MB L2, 800 MHz FSB)
- Core 2 Duo T5600 - 1.83 GHz (2 MB L2, 667 MHz FSB)
- Core 2 Duo T5500 - 1.66 GHz (2 MB L2, 667 MHz FSB, no VT)
- Core 2 Duo T5200 - 1.60 GHz (2 MB L2, 533 MHz FSB)
- Core 2 Duo L7500 - 1.60 GHz (4 MB L2, 800 MHz FSB) (Low Voltage)
- Core 2 Duo L7400 - 1.50 GHz (4 MB L2, 667 MHz FSB) (Low Voltage)
- Core 2 Duo L7300 - 1.40 GHz (4 MB L2, 800 MHz FSB) (Low Voltage)
- Core 2 Duo L7200 - 1.33 GHz (4 MB L2, 667 MHz FSB) (Low Voltage)
- Core 2 Duo U7600 - 1.20 GHz (2 MB L2, 533 MHz FSB) (Ultra mobile)
- Core 2 Duo U7500 - 1.06 GHz (2 MB L2, 533 MHz FSB) (Ultra mobile)
- Kentsfield - 65 nm process technology
- Desktop CPU Quad Core (SMP support restricted to 4 CPUs)
- Introduced December 13, 2006
- same features as Conroe but with 4 CPU Cores
- Socket 775
- Variants
- Core 2 Extreme QX6850 - 3 GHz (2x4 MB L2, 1333 MHz FSB)
- Core 2 Extreme QX6800 - 2.93 GHz (2x4 MB L2, 1066 MHz FSB) (Apr 9th 07)
- Core 2 Extreme QX6700 - 2.66 GHz (2x4 MB L2, 1066 MHz FSB) (Nov 14th 06)
- Core 2 Quad Q6600 - 2.40 GHz (2x4 MB L2, 1066 MHz FSB) (Jan 7th 07)
Detailed x86 architecture microprocessor lists
- List of Intel Pentium 4 microprocessors
- List of Intel Pentium D microprocessors
- List of Intel Xeon microprocessors
- List of Intel Pentium M microprocessors
- List of Intel Core microprocessors
- List of Intel Core 2 microprocessors
- List of Intel Celeron microprocessors
Intel 805xx product codes
Intel discontinued the use of part numbers such as 80486 in the marketing of mainstream x86-architecture microprocessors with the introduction of the Pentium brand in 1993. However, numerical codes, in the 805xx range, continued to be assigned to these processors for internal and part numbering uses. The following is a list of such product codes in numerical order:
Product code | Marketing name(s) | Codename(s) |
---|---|---|
80500 | Pentium | P5 (A-step) |
80501 | Pentium | P5 |
80502 | Pentium | P54C, P54CS |
80503 | Pentium MMX | P55C, Tillamook |
80521 | Pentium Pro | P6 |
80522 | Pentium II | Klamath |
80523 | Pentium II, Celeron, Pentium II Xeon | Deschutes, Covington, Drake |
80524 | Pentium II, Celeron | Dixon, Mendocino |
80525 | Pentium III, Pentium III Xeon | Katmai, Tanner |
80526 | Pentium III, Celeron, Pentium III Xeon | Coppermine, Cascades |
80528 | Pentium 4, Xeon | Willamette (Socket 423), Foster |
80529 | Celeron | Timna (canceled) |
80530 | Pentium III, Celeron | Tualatin |
80531 | Pentium 4, Celeron | Willamette (Socket 478) |
80532 | Pentium 4, Celeron, Xeon | Northwood, Prestonia, Gallatin |
80533 | Pentium III | Coppermine (cD0-step) |
80535 | Pentium M, Celeron M 310-340 | Banias |
80536 | Pentium M, Celeron M 350-390 | Dothan |
80537 | Core 2 Duo T-series, Celeron M 5xx | Merom |
80538 | Core Solo, Celeron M 4xx | Yonah |
80539 | Core Duo, Pentium Dual-Core T-series | Yonah |
80541 | Itanium | Merced |
80546 | Pentium 4, Celeron D, Xeon | Prescott (Socket 478), Nocona, Irwindale, Cranford, Potomac |
80547 | Pentium 4, Celeron D | Prescott (LGA775) |
80550 | Dual-Core Xeon 71xx | Tulsa |
80551 | Pentium D, Pentium EE, Dual-Core Xeon | Smithfield, Paxville DP |
80552 | Pentium 4, Celeron D | Cedar Mill |
80553 | Pentium D, Pentium EE | Presler |
80555 | Dual-Core Xeon 50xx | Dempsey |
80556 | Dual-Core Xeon 51xx | Woodcrest |
80557 | Core 2 Duo E-series, Dual-Core Xeon 30xx, Pentium Dual-Core E-series | Conroe |
80560 | Dual-Core Xeon 70xx | Paxville MP |
80562 | Core 2 Quad, Core 2 Extreme QX-series, Quad-Core Xeon 32xx | Kentsfield |
80563 | Quad-Core Xeon 53xx | Clovertown |
See also
- List of Intel microcontrollers
- List of AMD microprocessors
- List of Freescale products
- Intel P6
- NetBurst
- Intel Core microarchitecture
- Comparison of Intel processors
References
- ^ The 4004's original goal was to equal the clock speed of the IBM 1620 Model I (1 MHz); this was not quite met.
- ^ Intel Processor Spec Finder for Celeron M
- ^ Not listed as an official model by Intel but used by Apple in their Intel-based Mac Mini, released March 2006)
External links
- The ChipList – By Adrian Offerman
- Intel CPUs, an Overview
- Intel Museum: History of the Microprocessor
- CPU decoder ring – The Tech Report
- Current Intel CPUs – The PC Doctor
- endian.net – Chip Roadmaps
- Stealey A100 and A110