Xeon

Not to be confused with Xenon or Intel Xe.

Xeon

Logo since 2024
General information
Launched	June 1998 (June 1998)
Marketed by	Intel
Designed by	Intel
Common manufacturer	Intel
Performance
Max. CPU clock rate	400 MHz to 5.3 GHz
FSB speeds	100 MT/s to 1.6 GT/s
QPI speeds	4.8 GT/s to 24 GT/s
DMI speeds	2.0 GT/s to 16 GT/s
Data width	Up to 64 bits
Address width	Up to 64 bits
Virtual address width	Up to 57 bits
Cache
L1 cache	Up to 80 KB per core
L2 cache	Up to 2 MB per core
L3 cache	Up to 320 MB per socket
L4 cache	Up to 64 GB HBM2e
Architecture and classification
Application	Servers Workstations Embedded systems
Technology node	250 nm to Intel 3 and TSMC N5
Microarchitecture	P6 NetBurst Core Nehalem Westmere Sandy Bridge Ivy Bridge Haswell Broadwell Skylake Sunny Cove Cypress Cove Golden Cove Raptor Cove Redwood Cove Crestmont
Instruction set	x86-16, IA-32, x86-64
Instructions	MMX, SSE, SSE2, SSE3, SSSE3, SSE4, SSE4.1, SSE4.2, AVX, AVX2, FMA3, AVX-512, AVX-VNNI, AMX, TSX, AES-NI, CLMUL, RDRAND
Extensions	SGX, SHA, TXT, VT-x, VT-d
Physical specifications
Cores	Up to 64 cores per socket (up to 128 threads per socket)
Memory (RAM)	Up to 4 TB and 8 channels per socket Up to DDR5-5600 with ECC support
GPU	Intel Graphics Technology (some models only)
Co-processor	Xeon Phi (2010–2020)
Socket	Slot 2 Socket 603 Socket 604 LGA 775 LGA 771 LGA 1156 LGA 1366 LGA 1155 LGA 2011 LGA 1150 LGA 2011-3 LGA 1151 LGA 1151v2 LGA 1200 LGA 1700 LGA 2066 LGA 3647 LGA 4189 LGA 4677 LGA 7529
Products, models, variants
Brand name	Xeon E Xeon D Xeon w3 Xeon w5 Xeon w7 Xeon w9 Xeon Bronze Xeon Silver Xeon Gold Xeon Platinum Xeon Max
Variant	Itanium (2001–2020)
History
Predecessor	Pentium Pro
Support status
Supported

Xeon (/ˈziːɒn/; ZEE-on) is a brand of x86 microprocessors designed, manufactured, and marketed by Intel, targeted at the non-consumer workstation, server, and embedded markets. It was introduced in June 1998. Xeon processors are based on the same architecture as regular desktop-grade CPUs, but have advanced features such as support for error correction code (ECC) memory, higher core counts, more PCI Express lanes, support for larger amounts of RAM, larger cache memory and extra provision for enterprise-grade reliability, availability and serviceability (RAS) features responsible for handling hardware exceptions through the Machine Check Architecture (MCA). They are often capable of safely continuing execution where a normal processor cannot due to these extra RAS features, depending on the type and severity of the machine-check exception (MCE). Some also support multi-socket systems with two, four, or eight sockets through use of the Ultra Path Interconnect (UPI) bus, which replaced the older QuickPath Interconnect (QPI) bus.

Intel Xeon E5-1620's front and back

Branding

The Xeon brand has been maintained over several generations of IA-32 and x86-64 processors. The P6-based models added the Xeon moniker to the end of the name of their corresponding desktop processor, but all models since 2001 used the name Xeon on its own. The Xeon CPUs generally have more cache and cores than their desktop counterparts in addition to multiprocessing capabilities.

Xeon branding

(2020-2023)

(2024-present)

Xeon Scalable

The Xeon Scalable brand for high-performance server was introduced in May 2017 with the Skylake-based Xeon Platinum 8100 series. Xeon Scalable processors range from dual socket to 8 socket support. Within the Xeon Scalable brand, there exists the hierarchy of Xeon Bronze, Silver, Gold and Platinum.

Xeon Scalable branding

Xeon Bronze
(2017–2019)

Xeon Silver
(2017–2019)

Xeon Gold
(2017–2019)

Xeon Platinum
(2017–2019)

Xeon Bronze
(2020–2023)

Xeon Silver
(2020–2023)

Xeon Gold
(2020–2023)

Xeon Platinum
(2020–2023)

In April 2024, Intel announced at its Vision event that the Xeon Scalable brand would be retired, beginning with 6th generation Xeon processors codenamed Sierra Forest and Granite Rapids that will now be referred to as "Xeon 6" processors. This change brings greater emphasis on processor generation numbers.

Xeon 6

With the launch of Intel's Sierra Forest line of processors, branding for mainstream server processors switched to Xeon #, with the # being the generation of the processor, such as Xeon 6 for the 6th generation of Xeon processors, this naming convention also carries over to the Granite Rapids line of server CPUs.

Xeon 6 is split into two product lines, the E series and P series, which, respectively, are all E core and all P core designs. For example, the Xeon 6 6700E line is an all E core based (Sierra Forest) line of processors.

Xeon D

Xeon D is targeted towards microserver and edge computing markets with lower power consumption and integrated I/O blocks such as network interface controllers. This allows Xeon D processors to function as SoCs that do not require a separate southbridge PCH. It was announced in 2014 and the first Xeon D processors were released in March 2015. Xeon D processors come in an soldered BGA package rather than in a socketable form factor. Xeon D was introduced to compete with emerging ARM hyperscale server solutions that offered greater multi-threaded performance and power effiency.

Xeon W

Xeon W branding is used for Xeon workstation processors. It was first introduced in August 2017 with the release of the Skylake-based Xeon W-2100 series workstation processors. With Sapphire Rapids-WS workstation processors that launched in March 2023, Intel introduced tiers within Xeon W. Xeon w3, w5, w7 and w9 was designed to emulate the Core i3, i5, i7 and i9 branding that Intel had been using for its desktop processors.

Overview

Some shortcomings that make Xeon processors unsuitable for most consumer-grade desktop PCs include lower clock rates at the same price point (since servers run more tasks in parallel than desktops, core counts are more important than clock rates), and, usually, the lack of an integrated graphics processing unit (GPU). Processor models prior to Sapphire Rapids-WS lack support for overclocking (with the exception of Xeon W-3175X). Despite such disadvantages, Xeon processors have always had popularity among some desktop users (video editors and other power users), mainly due to higher core count potential, and higher performance to price ratio vs. the Core i7 in terms of total computing power of all cores. Since most Intel Xeon CPUs lack an integrated GPU, systems built with those processors require a discrete graphics card or a separate GPU if computer monitor output is desired.

Intel Xeon is a distinct product line from the similarly named Intel Xeon Phi. The first-generation Xeon Phi is a completely different type of device more comparable to a graphics card; it is designed for a PCI Express slot and is meant to be used as a multi-core coprocessor, like the Nvidia Tesla. In the second generation, Xeon Phi evolved into a main processor more similar to the Xeon. It conforms to the same socket as a Xeon processor and is x86-compatible; however, as compared to Xeon, the design point of the Xeon Phi emphasizes more cores with higher memory bandwidth.

Intel Xeon processor family: Server

	1 or 2 Sockets UP/DP/3000/5000/E3/E5-1xxx and 2xxx/E7-2xxx/D/E/W series Bronze/Silver/Gold (non H)/Platinum (non H)/Max			4 or 8 Sockets MP/7000/E5-4xxx/E7-4xxx and 8xxx seriesGold (H)/Platinum (H)
Node	Code named	# of Cores	Release date	Code named	# of Cores	Release date
250 nm				Drake	1	Jun 1998
				Tanner	1	Mar 1999
180 nm	Cascades (256 KB L2 cache)	1	Oct 1999	Cascades (700 and 900 MHz models only)	1	May 2000
	Foster	1	May 2001	Foster MP	1	Mar 2002
130 nm	Prestonia	1	Feb 2002
	Gallatin DP	1	Jul 2003	Gallatin	1	Nov 2002
90 nm	Nocona	1	Jun 2004	Cranford	1	Mar 2005
				Potomac	1	Mar 2005
	Irwindale	1	Feb 2005
	Paxville DP	2	Oct 2005	Paxville	2	Nov 2005
65 nm	Dempsey	2	May 2006	Tulsa	2	Aug 2006
	Sossaman	2	Mar 2006
	Woodcrest	2	Jun 2006
	Conroe	2	Oct 2006
	Clovertown	4	Nov 2006	Tigerton/Tigerton QC	2/4	Sep 2007
	Allendale	2	Jan 2007
	Kentsfield	4	Jan 2007
45 nm	Wolfdale DP	2	Nov 2007
	Harpertown	4	Nov 2007	Dunnington QC/Dunnington	4/6	Sep 2008
	Wolfdale	2	Feb 2008
	Yorkfield	4	Mar 2008
	Bloomfield (W35xx)	4	Mar 2009
	Gainestown (55xx)	2/4	Mar 2009
	Lynnfield (34xx)	4	Sep 2009
	Beckton (65xx)	4/6/8	Mar 2010	Beckton (75xx)	4-8	Mar 2010
32 nm	Westmere-EP (56xx)	2-6	Mar 2010
	Gulftown (W36xx)	6	Mar 2010
	Clarkdale (L34xx)	2	Mar 2010
	Westmere-EX (E7-2xxx)	6-10	Apr 2011	Westmere-EX (E7-4xxx/8xxx)	6-10	Apr 2011
	Sandy Bridge-DT/EN/EP	2-8	Mar 2012	Sandy Bridge-EP (E5-46xx)	4-8	May 2012
22 nm	Ivy Bridge (E3/E5-1xxx/E5-2xxx v2)	2-12	Sep 2013	Ivy Bridge-EP (E5-46xx v2)	4-12	Mar 2014
	Ivy Bridge-EX (E7-28xx v2)	12/15	Feb 2014	Ivy Bridge-EX (E7-48xx/88xx v2)	6-12/15	Feb 2014
	Haswell (E3/E5-1xxx/E5-2xxx v3)	2-18	Sep 2014	Haswell-EP (E5-46xx v3)	6-18	Jun 2015
				Haswell-EX (E7-48xx/88xx v3)	4-18	May 2015
14 nm	Broadwell (E3/E5-1xxx/E5-2xxx v4)	4-22	Jun 2015
	Skylake-S/H (E3-1xxx v5)	4	Oct 2015
	Kaby Lake-S/H (E3-1xxx v6)	4	Mar 2017
	Skylake-W/SP (Bronze and Silver)	4-28	Jun 2017	Skylake-SP (Gold and Platinum)	4-28	Jul 2017
	Cascade Lake-W/SP (Bronze/Silver/R/U)	4-28	Apr 2019	Cascade Lake-SP (Gold (non-R/U)/Platinum)	4-28	Apr 2019
				Cooper Lake-SP	8-28	Jun 2020
10 nm	Ice Lake-SP/W	8-40	Apr 2021
	Ice Lake-D	2-20	Feb 2022
Intel 7	Sapphire Rapids-SP/WS/HBM	6-56	Jan 2023	Sapphire Rapids-SP	8-60	Jan 2023
	Emerald Rapids-SP	8-64	Dec 2023
List of Intel Xeon processors

P6-based Xeon

Pentium II Xeon

Main article: List of Intel P6-based Xeon microprocessors § "Drake" (250 nm)

450 MHz Pentium II Xeon with 512 KB L2 cache: The cartridge cover has been removed.

The first Xeon-branded processor was the Pentium II Xeon (code-named "Drake"). It was released in 1998, replacing the Pentium Pro in Intel's high-end server lineup. The Pentium II Xeon was a "Deschutes" Pentium II (and shared the same product code: 80523) with a full-speed 512 kB (1 kB = 1024 B), 1 MB (1 MB = 1024 kB = 1024² B), or 2 MB L2 cache. The L2 cache was implemented with custom 512 kB SRAMs developed by Intel. The number of SRAMs depended on the amount of cache. A 512 kB configuration required one SRAM, a 1 MB configuration: two SRAMs, and a 2 MB configuration: four SRAMs on both sides of the PCB. Each SRAM was a 12.90 mm by 17.23 mm (222.21 mm²) die fabricated in a 0.35 μm four-layer metal CMOS process and packaged in a cavity-down wire-bonded land grid array (LGA). The additional cache required a larger module and thus the Pentium II Xeon used a larger slot, Slot 2. It was supported by the i440GX dual-processor workstation chipset and the i450NX quad- or octo-processor server chipset.

Pentium III Xeon

Main articles: List of Intel P6-based Xeon microprocessors § "Tanner" (250 nm), and § "Cascades" (180 nm)

Back of a Pentium III Xeon with its cover set aside; there is a heatsink on the front side (underneath) of the circuit board.

Front of a Pentium III Xeon circuit board without its heatsink

Die shot of a Cascades Pentium III Xeon

In 1999, the Pentium II Xeon was replaced by the Pentium III Xeon. Reflecting the incremental changes from the Pentium II "Deschutes" core to the Pentium III "Katmai" core, the first Pentium III Xeon, named "Tanner", was just like its predecessor except for the addition of Streaming SIMD Extensions (SSE) and a few cache controller improvements. The product codes for Tanner mirrored that of Katmai; 80525.

The second version, named "Cascades", was based on the Pentium III "Coppermine" core. The "Cascades" Xeon used a 133 MT/s front side bus and relatively small 256 kB on-die L2 cache resulting in almost the same capabilities as the Slot 1 Coppermine processors, which were capable of dual-processor operation but not quad-processor or octa-processor operation.

To improve this situation, Intel released another version, officially also named "Cascades", but often referred to as "Cascades 2 MB". That came in two variants: with 1 MB or 2 MB of L2 cache. Its bus speed was fixed at 100 MT/s, though in practice the cache was able to offset this. The product code for Cascades mirrored that of Coppermine; 80526.

NetBurst-based Xeon

Xeon (DP) and Xeon MP (32-bit)

Foster

Main articles: List of Intel NetBurst-based Xeon microprocessors § "Foster" (180 nm), and § "Foster MP" (180 nm)

In mid-2001, the Xeon brand was introduced ("Pentium" was dropped from the name). The initial variant that used the new NetBurst microarchitecture, "Foster", was slightly different from the desktop Pentium 4 ("Willamette"). It was a decent chip for workstations, but for server applications it was almost always outperformed by the older Cascades cores with a 2 MB L2 cache and AMD's Athlon MP. Combined with the need to use expensive Rambus Dynamic RAM, the Foster's sales were somewhat unimpressive.

At most two Foster processors could be accommodated in a symmetric multiprocessing (SMP) system built with a mainstream chipset, so a second version (Foster MP) was introduced with 512 KB or 1 MB L3 cache and the Jackson Hyper-Threading capacity. This improved performance slightly, but not enough to lift it out of third place. It was also priced much higher than the dual-processor (DP) versions. The Foster shared the 80528 product code with Willamette.

Prestonia

Main article: List of Intel NetBurst-based Xeon microprocessors § "Prestonia" (130 nm)

In 2002 Intel released a 130 nm version of Xeon branded CPU, codenamed "Prestonia". It supported Intel's new Hyper-Threading technology and had a 512 kB L2 cache. This was based on the "Northwood" Pentium 4 core. A new server chipset, E7500 (which allowed the use of dual-channel DDR SDRAM), was released to support this processor in servers, and soon the bus speed was boosted to 533 MT/s (accompanied by a new socket and two new chipsets: the E7501 for servers and the E7505 for workstations). The Prestonia performed much better than its predecessor and noticeably better than Athlon MP. The support of new features in the E75xx series also gave it a key advantage over the Pentium III Xeon and Athlon MP branded CPUs (both stuck with rather old chipsets), and it quickly became the top-selling server/workstation processor.

Gallatin

Gallatin

General information
Launched	March 2003
Discontinued	2004
CPUID code	0F7x
Product code	80537
Performance
Max. CPU clock rate	1.50 GHz to 3.20 GHz
FSB speeds	400 MT/s to 533 MT/s
Cache
L1 cache	8 kB + 12 kuOps trace cache
L2 cache	512 kB
L3 cache	1 MB, 2 MB, 4 MB
Architecture and classification
Application	DP and MP Server
Technology node	130 nm
Microarchitecture	NetBurst
Instruction set	x86-16, IA-32
Physical specifications
Cores	1
Package	Socket 603 Socket 604
Products, models, variants
Brand name	Xeon

Main articles: List of Intel NetBurst-based Xeon microprocessors § "Gallatin" (130 nm), and § "Gallatin" MP (130 nm)

Subsequent to the Prestonia was the "Gallatin", which had an L3 cache of 1 MB or 2 MB. Its Xeon MP version, which succeeded Foster MP, was popular in servers. Later experience with the 130 nm process allowed Intel to create the Xeon MP branded Gallatin with 4 MB cache. The Xeon branded Prestonia and Gallatin were designated 80532, like Northwood.

Xeon (DP) and Xeon MP (64-bit)

Nocona and Irwindale

Main articles: Pentium 4 § Prescott, List of Intel NetBurst-based Xeon microprocessors § "Nocona" (90 nm), and § "Irwindale" (90 nm)

Due to a lack of success with Intel's Itanium and Itanium 2 processors, AMD was able to introduce x86-64, a 64-bit extension to the x86 architecture. Intel followed suit by including Intel 64 (formerly EM64T; it is almost identical to AMD64) in the 90 nm version of the Pentium 4 ("Prescott"), and a Xeon version codenamed "Nocona" with 1 MB L2 cache was released in 2004. Released with it were the E7525 (workstation), E7520 and E7320 (both server) chipsets, which added support for PCI Express 1.0a, DDR2 and Serial ATA 1.0a. The Xeon was noticeably slower than AMD's Opteron, although it could be faster in situations where Hyper-Threading came into play.

A slightly updated core called "Irwindale" was released in early 2005, with 2 MB L2 cache and the ability to have its clock speed reduced during low processor demand. Although it was a bit more competitive than the Nocona had been, independent tests showed that AMD's Opteron still outperformed Irwindale. Both of these Prescott-derived Xeons have the product code 80546.

Cranford and Potomac

Main articles: Pentium 4 § Prescott, List of Intel NetBurst-based Xeon microprocessors § "Cranford" (90 nm), and § "Potomac" (90 nm)

64-bit Xeon MPs were introduced in April 2005. The cheaper "Cranford" was an MP version of Nocona, while the more expensive "Potomac" was a Cranford with 8 MB of L3 cache. Like Nocona and Irwindale, they also have product code 80546.

Dual-Core Xeon

"Paxville DP"

Main articles: List of Intel NetBurst-based Xeon microprocessors § "Paxville DP" (90 nm), and Pentium D § Smithfield

Paxville

General information
Launched	October 2005
Discontinued	August 2008
CPUID code	0F48
Product code	80551, 80560
Performance
Max. CPU clock rate	2.667 GHz to 3.0 GHz
FSB speeds	667 MT/s to 800 MT/s
Cache
L2 cache	2×2 MB
Architecture and classification
Application	DP Server, MP Server
Technology node	90 nm
Microarchitecture	NetBurst
Instruction set	x86-16, IA-32, x86-64
Physical specifications
Cores	2
Package	Socket 604
Products, models, variants
Brand name	Xeon

The first dual-core CPU branded Xeon, codenamed Paxville DP, product code 80551, was released by Intel on October 10, 2005. Paxville DP had NetBurst microarchitecture, and was a dual-core equivalent of the single-core Irwindale (related to the Pentium D branded "Smithfield") with 4 MB of L2 cache (2 MB per core). The only Paxville DP model released ran at 2.8 GHz, featured an 800 MT/s front side bus, and was produced using a 90 nm process.

7000-series "Paxville MP"

Main article: List of Intel NetBurst-based Xeon microprocessors § "Paxville MP" (90 nm)

An MP-capable version of Paxville, codenamed Paxville MP, product code 80560, was released on November 1, 2005. There are two versions: one with 2 MB of L2 cache (1 MB per core), and one with 4 MB of L2 (2 MB per core). Paxville MP, called the dual-core Xeon 7000-series, was produced using a 90 nm process. Paxville MP clock ranges between 2.67 GHz and 3.0 GHz (model numbers 7020–7041), with some models having a 667 MT/s FSB, and others having an 800 MT/s FSB.

Model	Speed	L2 cache	FSB	TDP
7020	2.66 GHz	2 × 1 MB	667 MT/s	165 W
7030	2.80 GHz		800 MT/s
7040	3.00 GHz	2 × 2 MB	667 MT/s
7041			800 MT/s

7100-series "Tulsa"

Main article: List of Intel NetBurst-based Xeon microprocessors § "Tulsa" (65 nm)

Tulsa

General information
Launched	August 2006
Discontinued	August 2008
CPUID code	0F68
Product code	80550
Performance
Max. CPU clock rate	2.50 GHz to 3.50 GHz
FSB speeds	667 MT/s to 800 MT/s
Cache
L2 cache	2×1 MB
L3 cache	16 MB
Architecture and classification
Application	MP Server
Technology node	65 nm
Microarchitecture	NetBurst
Instruction set	x86-16, IA-32, x86-64
Physical specifications
Cores	2
Package	Socket 604
Products, models, variants
Brand name	Xeon 71xx

Released on August 29, 2006, the 7100 series, codenamed Tulsa (product code 80550), is an improved version of Paxville MP, built on a 65 nm process, with 2 MB of L2 cache (1 MB per core) and up to 16 MB of L3 cache. It uses Socket 604. Tulsa was released in two lines: the N-line uses a 667 MT/s FSB, and the M-line uses an 800 MT/s FSB. The N-line ranges from 2.5 GHz to 3.5 GHz (model numbers 7110N-7150N), and the M-line ranges from 2.6 GHz to 3.4 GHz (model numbers 7110M-7140M). L3 cache ranges from 4 MB to 16 MB across the models.

Model	Speed	L2 cache	L3 cache	FSB	TDP
7110N	2.50 GHz	2 MB	4 MB	667 MT/s	095 W
7110M	2.60 GHz			800 MT/s
7120N	3.00 GHz			667 MT/s
7120M				800 MT/s
7130N	3.16 GHz		8 MB	667 MT/s	150 W
7130M	3.20 GHz			800 MT/s
7140N	3.33 GHz		16 MB	667 MT/s
7140M	3.40 GHz			800 MT/s
7150N	3.50 GHz			667 MT/s

5000-series "Dempsey"

Main article: List of Intel NetBurst-based Xeon microprocessors § "Dempsey" (65 nm)

Dempsey

General information
Launched	May 2006
Discontinued	August 2008
Performance
Max. CPU clock rate	2.50 GHz to 3.73 GHz
FSB speeds	667 MT/s to 1066 MT/s
Cache
L2 cache	4 MB
Architecture and classification
Application	DP Server
Technology node	65nm
Microarchitecture	NetBurst
Instruction set	x86-16, IA-32, x86-64
Physical specifications
Cores	2
Package	LGA 771
Products, models, variants
Brand name	Xeon 50xx

On May 23, 2006, Intel released the dual-core CPU (Xeon branded 5000 series) codenamed Dempsey (product code 80555). Released as the Dual-Core Xeon 5000-series, Dempsey is a NetBurst microarchitecture processor produced using a 65 nm process, and is virtually identical to Intel's "Presler" Pentium Extreme Edition, except for the addition of SMP support, which lets Dempsey operate in dual-processor systems. Dempsey ranges between 2.50 GHz and 3.73 GHz (model numbers 5020–5080). Some models have a 667 MT/s FSB, and others have a 1066 MT/s FSB. Dempsey has 4 MB of L2 cache (2 MB per core). A Medium Voltage model, at 3.2 GHz and 1066 MT/s FSB (model number 5063), has also been released. Dempsey also introduces a new interface for Xeon processors: LGA 771, also known as Socket J. Dempsey was the first Xeon core in a long time to be somewhat competitive with its Opteron-based counterparts, although it could not claim a decisive lead in any performance metric – that would have to wait for its successor, the Woodcrest.

Model	Speed (GHz)	L2 cache	FSB	TDP
5020	2.50 GHz	2 × 2 MB	667 MT/s	95 W
5030	2.66 GHz
5040	2.83 GHz
5050	3.00 GHz
5060	3.20 GHz		1.07 GT/s	130 W
5063				95 W
5070	3.46 GHz			130 W
5080	3.73 GHz

Pentium M (Yonah) based Xeon

LV (ULV), "Sossaman"

Main article: List of Intel Pentium M (Yonah)-based Xeon microprocessors § "Sossaman" (65 nm)

Sossaman

General information
Launched	2006
Discontinued	2008
CPUID code	06Ex
Product code	80539
Performance
Max. CPU clock rate	1.667 GHz to 2.167 GHz
FSB speeds	667 MT/s
Cache
L2 cache	2 MB
Architecture and classification
Application	DP Server
Technology node	65 nm
Microarchitecture	Enhanced Pentium M
Instruction set	x86-16, IA-32, x86-64
Physical specifications
Cores	2
Package	Socket M
Products, models, variants
Brand name	Xeon

On March 14, 2006, Intel released a dual-core processor codenamed Sossaman and branded as Xeon LV (low-voltage). Subsequently, an ULV (ultra-low-voltage) version was released. The Sossaman was a low-/ultra-low-power and double-processor capable CPU (like AMD Quad FX), based on the "Yonah" processor, for ultradense non-consumer environment (i.e., targeted at the blade-server and embedded markets), and was rated at a thermal design power (TDP) of 31 W (LV: 1.66 GHz, 2 GHz and 2.16 GHz) and 15 W (ULV: 1.66 GHz). As such, it supported most of the same features as earlier Xeons: Virtualization Technology, 667 MT/s front side bus, and dual-core processing, but did not support 64-bit operations, so it could not run 64-bit server software, such as Microsoft Exchange Server 2007, and therefore was limited to 16 GB of memory. A planned successor, codenamed "Merom MP" was to be a drop-in upgrade to enable Sossaman-based servers to upgrade to 64-bit capability. However, this was abandoned in favor of low-voltage versions of the Woodcrest LV processor leaving the Sossaman at a dead-end with no upgrade path.

Model	Speed	L2 cache	FSB	TDP
ULV 1.66	1.66 GHz	2 MB	667 MT/s	15 W
LV 1.66				31 W
LV 2.00	2.00 GHz
LV 2.16	2.16 GHz

Core-based Xeon

Dual-Core

3000-series "Conroe"

Main articles: Conroe (microprocessor) and List of Intel Core-based Xeon microprocessors § "Conroe" (65 nm)

The 3000 series, codenamed Conroe (product code 80557) dual-core Xeon (branded) CPU, released at the end of September 2006, was the first Xeon for single-CPU operation and is designd for entry-level uniprocessor servers. The same processor is branded as Core 2 Duo or as Pentium Dual-Core and Celeron, with varying features disabled. They use LGA 775 (Socket T), operate on a 1066 MT/s front-side bus, support Enhanced Intel SpeedStep Technology and Intel Virtualization Technology but do not support hyper-threading. Conroe processors with a number ending in "5" have a 1333 MT/s FSB.

Model	Speed	L2 cache	FSB	TDP
3040	1.86 GHz	2 MB	1066 MT/s	65 W
3050	2.13 GHz
3055*		4 MB
3060	2.4 GHz
3065	2.33 GHz		1333 MT/s
3070	2.66 GHz		1066 MT/s
3075			1333 MT/s
3080*	2.93 GHz		1066 MT/s
3085	3.00 GHz		1333 MT/s

• Models marked with an asterisk (*) are not present in Intel's Ark database.

3100-series "Wolfdale"

Main articles: Wolfdale (microprocessor), List of Intel Core-based Xeon microprocessors § "Wolfdale" (45 nm), and § "Wolfdale-CL" (45 nm)

The 3100 series, codenamed Wolfdale (product code 80570) dual-core Xeon (branded) CPU, was just a rebranded version of the Intel's mainstream Core 2 Duo E7000/E8000 and Pentium Dual-Core E5000 processors, featuring the same 45 nm process and 6 MB of L2 cache. Unlike most Xeon processors, they only support single-CPU operation. They use LGA 775 (Socket T), operate on a 1333 MT/s front-side bus, support Enhanced Intel SpeedStep Technology and Intel Virtualization Technology but do not support Hyper-Threading.

Model	Speed	L2 cache	FSB	TDP
E3110	3.00 GHz	6 MB	1333 MT/s	65 W
L3110				45 W
E3120	3.16 GHz			65 W

5100-series "Woodcrest"

Main article: List of Intel Core-based Xeon microprocessors § "Woodcrest" (65 nm)

Woodcrest

General information
Launched	2006 (2006)
Discontinued	2009 (2009)
Marketed by	Intel
Designed by	Intel
Common manufacturer	Intel
CPUID code	06Fx
Product code	80556
Performance
Max. CPU clock rate	1.60 GHz to 3.0 GHz
FSB speeds	1066 MT/s to 1333 MT/s
Cache
L1 cache	128 KB (64 KB (32 KB instruction + 32 KB data) x 2)
L2 cache	4 MB
Architecture and classification
Application	DP Server
Technology node	65nm
Microarchitecture	Core/Merom
Instruction set	x86-16, IA-32, x86-64
Physical specifications
Cores	2
Socket	LGA 771
Products, models, variants
Brand name	Xeon 51xx
Variants	Clovertown Tigerton
History
Predecessor	Dempsey
Successor	Wolfdale-DP

On June 26, 2006, Intel released the dual-core CPU (Xeon branded 5100 series) codenamed Woodcrest (product code 80556); it was the first Intel Core/Merom microarchitecture processor to be launched on the market. It is a dual-processor server and workstation version of the Core 2 processor. Intel claimed that it provides an 80% boost in performance, while reducing power consumption by 20% relative to the 5000 series Dempsey.

Most models have a 1333 MT/s FSB, except for the 5110 and 5120, which have a 1066 MT/s FSB. The fastest processor (5160) operates at 3.0 GHz. All Woodcrest processors use the LGA 771 (Socket J) socket and all except two models have a TDP of 65 W. The 5160 has a TDP of 80 W and the 5148LV (2.33 GHz) has a TDP of 40 W. The previous generation Xeons had a TDP of 130 W. All models support Intel 64 (Intel's x86-64 implementation), the XD bit, and Virtualization Technology, with the Demand-based switching power management option only on Dual-Core Xeon 5140 or above. Woodcrest has 4 MB of shared L2 cache.

Model	Speed	L2 cache	FSB	TDP
5110	1.60 GHz	4 MB	1066 MT/s	65 W
5120	1.83 GHz
5128				40 W
5130	2.0 GHz		1333 MT/s	65 W
5138	2.13 GHz		1066 MT/s	35 W
5140	2.33 GHz		1333 MT/s	65 W
5148				40 W
5150	2.66 GHz			65 W
5160	3.00 GHz			80 W

5200-series "Wolfdale-DP"

Main article: List of Intel Core-based Xeon microprocessors § "Wolfdale-DP" (45 nm)

Wolfdale-DP

General information
Launched	2007
Discontinued	present
CPUID code	1067x
Product code	80573
Performance
Max. CPU clock rate	1.866 GHz to 3.50 GHz
FSB speeds	1066 MT/s to 1600 MT/s
Cache
L2 cache	6 MB
Architecture and classification
Application	DP Server
Technology node	45 nm
Microarchitecture	Penryn
Instruction set	x86-16, IA-32, x86-64
Physical specifications
Cores	2
Package	LGA 771
Products, models, variants
Brand name	Xeon 52xx

On November 11, 2007, Intel released the dual-core CPU (Xeon branded 5200 series) codenamed Wolfdale-DP (product code 80573). It is built on a 45 nm process like the desktop Core 2 Duo and Xeon Wolfdale, featuring Intel 64 (Intel's x86-64 implementation), the XD bit, and Virtualization Technology. It is unclear whether the Demand-based switching power management is available on the L5238. Wolfdale has 6 MB of shared L2 cache.

Model	Speed (GHz)	L2 cache	FSB	TDP
E5205	1.86 GHz	6 MB	1066 MT/s	65 W
L5238	2.66 GHz		1333 MT/s	35 W
L5240	3.00 GHz			40 W
X5260	3.33 GHz			80 W
X5270	3.50 GHz
X5272	3.40 GHz		1600 MT/s

7200-series "Tigerton"

Main article: List of Intel Core-based Xeon microprocessors § "Tigerton-DC" (65 nm)

The 7200 series, codenamed Tigerton (product code 80564) is an MP-capable processor, similar to the 7300 series, but, in contrast, there is a single dual-core die.

Model	Speed	L2 cache	FSB	TDP
E7210	2.40 GHz	4 MB	1066 MT/s	80 W
E7220	2.93 GHz

Quad-Core and Six-Core Xeon

3200-series "Kentsfield "

Main articles: Kentsfield (microprocessor) and List of Intel Core-based Xeon microprocessors § "Kentsfield" (65 nm)

Intel released rebranded versions of its quad-core (2×2) Core 2 Quad processor as the Xeon 3200-series (product code 80562) on January 7, 2007. The 2 × 2 "quad-core" (dual-die dual-core) comprised two separate dual-core die next to each other in one CPU package. The models are the X3210, X3220 and X3230, running at 2.13 GHz, 2.4 GHz and 2.66 GHz, respectively. Like the 3000-series, these models only support single-CPU operation and operate on a 1066 MT/s front-side bus. It is targeted at the "blade" market. The X3220 is also branded and sold as Core2 Quad Q6600, the X3230 as Q6700.

Model	Speed	L2 cache	FSB	TDP
X3210	2.13 GHz	4 MB × 2	1066 MT/s	100/105 W
X3220	2.40 GHz
X3230	2.66 GHz			100 W

3300-series "Yorkfield"

Main articles: Yorkfield (microprocessor), List of Intel Core-based Xeon microprocessors § "Yorkfield" (45 nm), and § "Yorkfield-CL" (45 nm)

Intel released relabeled versions of its quad-core Core 2 Quad Yorkfield Q9300, Q9400, Q9x50 and QX9770 processors as the Xeon 3300-series (product code 80569). This processor comprises two separate dual-core dies next to each other in one CPU package and manufactured in a 45 nm process. The models are the X3320, X3330, X3350, X3360, X3370 and X3380, being rebadged Q9300, Q9400, Q9450, Q9550, Q9650, QX9770, running at 2.50 GHz, 2.66 GHz, 2.66 GHz, 2.83 GHz, 3.0 GHz, and 3.16 GHz, respectively. The L2 cache is a unified 6 MB per die (except for the X3320 and X3330 with a smaller 3 MB L2 cache per die), and a front-side bus of 1333 MHz. All models feature Intel 64 (Intel's x86-64 implementation), the XD bit, and Virtualization Technology, as well as Demand-based switching.

The Yorkfield-CL (product code 80584) variant of these processors are X3323, X3353 and X3363. They have a reduced TDP of 80W and are made for single-CPU LGA 771 systems instead of LGA 775, which is used in all other Yorkfield processors. In all other respects, they are identical to their Yorkfield counterparts.

5300-series "Clovertown"

Main article: List of Intel Core-based Xeon microprocessors § "Clovertown" (65 nm)

Clovertown

General information
Launched	2006
Discontinued	present
CPUID code	06Fx
Product code	80563
Performance
Max. CPU clock rate	1.60 GHz to 3.0 GHz
FSB speeds	1066 MT/s to 1333
Cache
L2 cache	2×4 MB
Architecture and classification
Application	DP Server
Technology node	65 nm
Microarchitecture	Core
Instruction set	x86-16, IA-32, x86-64
Physical specifications
Cores	4
Package	LGA 771
Products, models, variants
Brand name	Xeon 53xx

A quad-core (2×2) successor of the Woodcrest for DP segment, consisting of two dual-core Woodcrest chips in one package similarly to the dual-core Pentium D branded CPUs (two single-core chips) or the quad-core Kentsfield. All Clovertowns use the LGA 771 package. The Clovertown has been usually implemented with two Woodcrest dies on a multi-chip module, with 8 MB of L2 cache (4 MB per die). Like Woodcrest, lower models use a 1066 MT/s FSB, and higher models use a 1333 MT/s FSB. Intel released Clovertown, product code 80563, on November 14, 2006 with models E5310, E5320, E5335, E5345, and X5355, ranging from 1.6 GHz to 2.66 GHz. All models support MMX, SSE, SSE2, SSE3, SSSE3, Intel 64, XD bit (an NX bit implementation), Intel VT. The E and X designations are borrowed from Intel's Core 2 model numbering scheme; an ending of -0 implies a 1066 MT/s FSB, and an ending of -5 implies a 1333 MT/s FSB. All models have a TDP of 80 W with the exception of the X5355, which has a TDP of 120 W, and the X5365, which has a TDP of 150 W. A low-voltage version of Clovertown with a TDP of 50 W has a model numbers L5310, L5320 and L5335 (1.6 GHz, 1.86 GHz and 2.0 GHz respectively). The 3.0 GHz X5365 arrived in July 2007, and became available in the Apple Mac Pro on April 4, 2007. The X5365 performs up to around 38 GFLOPS in the LINPACK benchmark.

Model	Speed	L2 cache	FSB	TDP
E5310	1.60 GHz	4 MB × 2	1066 MT/s	80 W
L5310				50 W
E5320	1.86 GHz			80 W
L5320				50 W
E5335	2.00 GHz		1333 MT/s	80 W
L5335				50 W
E5345	2.33 GHz			80 W
X5355	2.66 GHz			120 W
X5365	3.00 GHz			150 W

5400-series "Harpertown"

Main article: List of Intel Core-based Xeon microprocessors § "Harpertown" (45 nm)

Harpertown

General information
Launched	2007
Discontinued	present
CPUID code	1067x
Product code	80574
Performance
Max. CPU clock rate	2.0 GHz to 3.40 GHz
FSB speeds	1066 MT/s to 1600
Cache
L2 cache	2 × 6 MB
Architecture and classification
Application	DP Server
Technology node	45 nm
Microarchitecture	Penryn
Instruction set	x86-16, IA-32, x86-64
Physical specifications
Cores	4
Package	LGA 771
Products, models, variants
Brand names	Xeon 54xx Core 2 Quad QX9775

On November 11, 2007 Intel presented Yorkfield-based Xeons – called Harpertown (product code 80574) – to the public. This family consists of dual die quad-core CPUs manufactured on a 45 nm process and featuring 1066 MHz, 1333 MHz, 1600 MHz front-side buses, with TDP rated from 40 W to 150 W depending on the model. These processors fit in the LGA 771 package. All models feature Intel 64 (Intel's x86-64 implementation), the XD bit, and Virtualization Technology. All except the E5405 and L5408 also feature Demand-based switching. The supplementary character in front of the model-number represents the thermal rating: an L depicts a TDP of 40 W or 50 W, an E depicts 80 W whereas an X is 120 W TDP or above. The speed of 3.00 GHz comes as four models, two models with 80 W TDP two other models with 120 W TDP with 1333 MHz or 1600 MHz front-side bus respectively. The fastest Harpertown is the X5492 whose TDP of 150 W is higher than those of the Prescott-based Xeon DP but having twice as many cores. (The X5482 is also sold under the name "Core 2 Extreme QX9775" for use in the Intel Skulltrail system.)

Intel 1.6 GT/s front-side bus Xeon processors will drop into the Intel 5400 (Seaburg) chipset whereas several mainboards featuring the Intel 5000/5200-chipset are enabled to run the processors with a 1333 MHz front-side bus speed. Seaburg features support for dual PCIe 2.0 x16 slots and up to 128 GB of memory.

Model	Speed	L2 cache	FSB	TDP
E5405	2.00 GHz	2 × 6 MB	1333 MT/s	80 W
L5408	2.13 GHz		1066 MT/s	40 W
E5410	2.33 GHz		1333 MT/s	80 W
L5410				50 W
E5420	2.50 GHz			80 W
L5420				50 W
E5430	2.66 GHz			80 W
L5430				50 W
E5440	2.83 GHz			80 W
X5450	3.00 GHz			120 W
E5450				80 W
X5460	3.16 GHz			120 W
X5470	3.33 GHz
E5462	2.80 GHz		1600 MT/s	80 W
E5472	3.00 GHz
X5472				120 W
X5482	3.20 GHz			150 W
X5492	3.40 GHz

7300-series "Tigerton QC"

Main article: List of Intel Core-based Xeon microprocessors § "Tigerton" (65 nm)

Tigerton

General information
Launched	2007
Discontinued	present
CPUID code	06Fx
Product code	80564 80565
Performance
Max. CPU clock rate	1.60 GHz to 2.933 GHz
FSB speeds	1066 MT/s
Cache
L2 cache	2×2 or 2×4 MB
Architecture and classification
Application	MP Server
Technology node	65 nm
Microarchitecture	Core
Instruction set	x86-16, IA-32, x86-64
Physical specifications
Cores	4
Package	mPGA604
Products, models, variants
Brand names	Xeon 72xx Xeon 73xx

The 7300 series, codenamed Tigerton QC (product code 80565) is a four-socket (packaged in Socket 604) and more capable quad-core processor, consisting of two dual core Core 2 architecture silicon chips on a single ceramic module, similar to Intel's Xeon 5300 series Clovertown processor modules.

The 7300 series uses Intel's Caneland (Clarksboro) platform.

Intel claims the 7300 series Xeons offer more than twice the performance per watt as Intel's previous generation 7100 series. The 7300 series' Caneland chipset provides a point to point interface allowing the full front side bus bandwidth per processor.

The 7xxx series is aimed at the large server market, supporting configurations of up to 32 CPUs per host.

Model	Speed	L2 cache	FSB	TDP
E7310	1.60 GHz	2×2 MB	1066 MT/s	80 W
E7320	2.13 GHz
E7330	2.40 GHz	2×3 MB
E7340		2×4 MB
L7345	1.86 GHz			50 W
X7350	2.93 GHz			130 W

7400-series "Dunnington"

Main article: List of Intel Core-based Xeon microprocessors § "Dunnington" (45 nm)

Dunnington

General information
Launched	2008
Discontinued	present
CPUID code	106D1
Product code	80582
Performance
Max. CPU clock rate	2.133 GHz to 2.66 GHz
FSB speeds	1066 MT/s
Cache
L1 cache	6 × 96 KB
L2 cache	3 × 3 MB
L3 cache	16 MB
Architecture and classification
Application	MP Server
Technology node	45 nm
Microarchitecture	Penryn
Instruction set	x86-16, IA-32, x86-64
Physical specifications
Cores	6
Package	mPGA604
Products, models, variants
Brand name	Xeon 74xx

Dunnington – the last CPU of the Penryn generation and Intel's first multi-core (above two) die – features a single-die six- (or hexa-) core design with three unified 3 MB L2 caches (resembling three merged 45 nm dual-core Wolfdale-3M dies), and 96 kB L1 cache (Data) and 16 MB of L3 cache. It features a 1.07 GT/s FSB, fits into the Tigerton's mPGA604 socket, and is compatible with both the Intel Caneland and IBM X4 chipsets. These processors support DDR2-1066 (533 MHz), and have a maximum TDP below 130 W. They are intended for blades and other stacked computer systems. Availability was scheduled for the second half of 2008. It was followed shortly by the Nehalem microarchitecture. Total transistor count is 1.9 billion.

Announced on September 15, 2008.

Model	Speed	L3 cache	FSB	TDP	Cores
E7420	2.13 GHz	8 MB	1066 MT/s	90 W	4
E7430		12 MB
E7440	2.40 GHz	16 MB
L7445	2.13 GHz	12 MB		50 W
E7450	2.40 GHz			90 W	6
L7455	2.13 GHz			65 W
X7460	2.66 GHz	16 MB		130 W

Nehalem-based Xeon

3400-series "Lynnfield"

Main articles: Lynnfield (microprocessor) and List of Intel Nehalem-based Xeon microprocessors § "Lynnfield" (45 nm)

Xeon 3400-series processors based on Lynnfield are designed for entry-level servers compared to Bloomfield, which is designed for uniprocessor workstations. Like Bloomfield, they are quad-core single-package processors based on the Nehalem microarchitecture, but were introduced almost a year later, in September 2009. The same processors are marketed for mid-range to high-end desktops systems as Core i5 and Core i7. They have two integrated memory channels as well as PCI Express and Direct Media Interface (DMI) links, but no QuickPath Interconnect (QPI) interface.

3400-series "Clarkdale"

Main articles: Clarkdale (microprocessor) and List of Intel Nehalem-based Xeon microprocessors § "Clarkdale" (MCP, 32 nm)

At low end of the 3400-series is not a Lynnfield but a Clarkdale processor, which is also used in the Core i3-500 and Core i5-600 processors as well as the Celeron G1000 and G6000 Pentium series. A single model was released in March 2010, the Xeon L3406. Compared to all other Clarkdale-based products, this one does not support integrated graphics, but has a much lower thermal design power of just 30 W. Compared to the Lynnfield-based Xeon 3400 models, it only offers two cores.

W3500-series "Bloomfield"

Main articles: Bloomfield (microprocessor) and List of Intel Nehalem-based Xeon microprocessors § "Bloomfield" (45 nm)

Bloomfield (or Nehalem-E) is the codename for the successor to the Xeon 3300 series, is based on the Nehalem microarchitecture and uses the same 45 nm manufacturing methods as Intel's Penryn. The first processor released with the Nehalem architecture is the high-end desktop Core i7, which was released in November 2008. This is the server version for single CPU systems. This is a single-socket Intel Xeon processor designed for uniprocessor workstations.

The performance improvements over the previous Xeon 3300 series are based mainly on:

• Integrated memory controller supporting three memory channels of DDR3 UDIMM (Unbuffered) or RDIMM (Registered)
• A new point-to-point processor interconnect QuickPath, replacing the legacy front side bus
• Simultaneous multithreading by multiple cores and hyper-threading (2× per core).
• Turbo Boost, an overclocking technology that allows the CPU to run at a clock speed higher than the base speed as needed

Model	Speed	L3 cache	QPI speed	DDR3 speed	TDP	Cores	Threads	Turbo-Boost
W3503	2.40 GHz	4 MB	4.8 GT/s	1066 MT/s	130 W	2		No
W3505	2.53 GHz
W3520	2.66 GHz	8 MB				4	8	Yes
W3530	2.80 GHz
W3540	2.93 GHz
W3550	3.06 GHz
W3565	3.20 GHz
W3570	3.2 GHz		6.4 GT/s	1333 MT/s
W3580	3.33 GHz

5500-series "Gainestown"

Main article: List of Intel Nehalem-based Xeon microprocessors § "Gainestown" (45 nm)

Gainestown

General information
Launched	2008
Discontinued	present
CPUID code	106Ax
Product code	80602
Performance
Max. CPU clock rate	1.866 GHz to 3.333 GHz
Cache
L2 cache	4×256 kB
L3 cache	8 MB
Architecture and classification
Application	DP Server
Technology node	45 nm
Microarchitecture	Nehalem
Instruction set	x86-16, IA-32, x86-64
Physical specifications
Cores	4
Package	LGA 1366
Products, models, variants
Brand name	Xeon 55xx

Gainestown or Nehalem-EP (Efficient Performance), the successor to Wolfdale-DP, and Harpertown, is based on the Nehalem microarchitecture and uses the same 45 nm manufacturing methods. The first processor released with the Nehalem microarchitecture is the high-end desktop Core i7, which was released in November 2008. Server processors of the Xeon 55xx range were first supplied to testers in December 2008.

The performance improvements over Wolfdale-DP and Harpertown processors are based mainly on:

• Monolithic design for quad-core models
• Integrated memory controller supporting three memory channels of DDR3 memory with ECC support.
• A new point-to-point processor interconnect QuickPath, replacing the legacy front side bus. Gainestown has two QuickPath interfaces.
• Hyper-threading (2× per core, starting from 5518), that was already present in NetBurst-based processors
• Turbo Boost, an overclocking technology that allows the CPU to run at a clock speed higher than the base speed as needed

Model	Speed	L3 cache	QPI speed	DDR3 speed	TDP	Cores	Threads	Turbo-Boost
E5502	1.87 GHz	4 MB	4.8 GT/s	800 MT/s	80 W	2		No
E5503	2.00 GHz
E5504						4	4
E5506	2.13 GHz
L5506					60 W
E5507	2.26 GHz				80 W
L5518	2.13 GHz	8 MB	5.86 GT/s	1066 MT/s	60 W		8	Yes
E5520	2.26 GHz				80 W
L5520					60 W
E5530	2.40 GHz				80 W
L5530					60 W
E5540	2.53 GHz				80 W
X5550	2.66 GHz		6.4 GT/s	1333 MT/s	95 W
X5560	2.80 GHz
X5570	2.93 GHz
W5580	3.20 GHz				130 W
W5590	3.33 GHz

C3500/C5500-series "Jasper Forest"

Main article: List of Intel Nehalem-based Xeon microprocessors § "Jasper Forest" (45 nm)

Jasper Forest

General information
Launched	2010
Discontinued	present
CPUID code	106Ex
Product code	80612
Performance
Max. CPU clock rate	1.733 GHz to 2.40 GHz
Cache
L2 cache	4×256 kB
L3 cache	8 MB
Architecture and classification
Application	UP/DP Server
Technology node	45 nm
Microarchitecture	Nehalem
Instruction set	x86-16, IA-32, x86-64
Physical specifications
Cores	4
Package	LGA 1366
Products, models, variants
Brand names	Xeon C35xx (UP) Xeon C55xx (DP) Celeron P1xxx (UP)

Jasper Forest is a Nehalem-based embedded processor with PCI Express connections on-die, core counts from 1 to 4 cores and power envelopes from 23 to 85 watts.

The uni-processor version without QPI comes as LC35xx and EC35xx, while the dual-processor version is sold as LC55xx and EC55xx and uses QPI for communication between the processors. Both versions use a DMI link to communicate with the 3420 that is also used in the 3400-series Lynfield Xeon processors, but use an LGA 1366 package that is otherwise used for processors with QPI but no DMI or PCI Express links. The CPUID code of both Lynnfield and Jasper forest is 106Ex, i.e., family 6, model 30.

The Celeron P1053 belongs into the same family as the LC35xx series, but lacks some RAS features that are present in the Xeon version.

W3600/5600-series "Gulftown" & "Westmere-EP"

Main articles: Gulftown (microprocessor), List of Intel Nehalem-based Xeon microprocessors § "Gulftown" (32 nm), and § "Westmere-EP" (32 nm)

Gulftown and Westmere-EP, six-core 32 nm architecture Westmere-based processors, are the basis for the Xeon 36xx and 56xx series and the Core i7-980X. It launched in the first quarter of 2010. The 36xx-series follows the 35xx-series Bloomfield uni-processor model while the 56xx-series follows the 55xx-series Gainestown dual-processor model and both are socket compatible to their predecessors.

Model	Speed	L3 cache	QPI speed	DDR3 speed	TDP	Cores	Threads	Turbo-Boost
W3670	3.20 GHz	12 MB	4.8 GT/s	1066 MT/s	130 W	6	12	Yes
W3680	3.33 GHz		6.4 GT/s	1333 MT/s
W3690	3.46 GHz
E5603	1.60 GHz	4 MB	4.8 GT/s	800 MT/s	80 W	4	4	No
E5606	2.13 GHz	8 MB		1066 MT/s
E5607	2.26 GHz
L5609	1.86 GHz	12 MB			40 W
L5618			5.86 GT/s				8	Yes
E5620	2.40 GHz				80 W
L5630	2.13 GHz				40 W
E5630	2.53 GHz				80 W
L5638	2.00 GHz			1333 MT/s	60 W	6	12
L5639	2.13 GHz
L5640	2.26 GHz
E5640	2.66 GHz			1066 MT/s	80 W	4	8
L5645	2.40 GHz			1333 MT/s	60 W	6	12
E5645					80 W
E5649	2.53 GHz
X5650	2.66 GHz		6.4 GT/s		95 W
X5660	2.80 GHz
X5667	3.06 GHz					4	8
X5670	2.93 GHz					6	12
X5672	3.20 GHz					4	8
X5675	3.06 GHz					6	12
X5677	3.46 GHz				130 W	4	8
X5679	3.20 GHz			1066 MT/s	115 W	6	12
X5680	3.33 GHz			1333 MT/s	130 W
X5687	3.60 GHz					4	8
X5690	3.46 GHz					6	12
X5698	4.40 GHz			1066 MT/s		2	4	No

6500/7500-series "Beckton"

Main article: List of Intel Nehalem-based Xeon microprocessors § "Beckton" (45 nm)

Beckton

Xeon E7530 (with and without the heat spreader)
General information
Launched	March 30, 2010 (2010-03-30)
Discontinued	Q4 2012
Marketed by	Intel
Designed by	Intel
Common manufacturer	Intel
CPUID code	206Ex
Product code	80604
Performance
Max. CPU clock rate	1.733 GHz to 2.667 GHz
QPI speeds	6.4 GT/s
Cache
L2 cache	256 KB per core
L3 cache	Up to 24 MB
Architecture and classification
Application	DP/MP Server
Technology node	45 nm
Microarchitecture	Nehalem
Instruction set	x86-16, IA-32, x86-64
Physical specifications
Cores	4-8
Package	LGA 1567
Products, models, variants
Brand names	Xeon 65xx (DP) Xeon 75xx (MP)

Beckton or Nehalem-EX (Expandable server market) is a Nehalem-based processor with up to eight cores and uses buffering inside the chipset to support up to 16 standard DDR3 DIMMs per CPU socket without requiring the use of FB-DIMMs. Unlike all previous Xeon MP processors, Nehalem-EX uses the new LGA 1567 (Socket LS) package, replacing the Socket 604 used in the previous models, up to Xeon 7400 "Dunnington". The 75xx models have four QuickPath interfaces, so it can be used in up-to eight-socket configurations, while the 65xx models are only for up to two sockets. Designed by the Digital Enterprise Group (DEG) Santa Clara and Hudson Design Teams, Beckton is manufactured on the P1266 (45 nm) technology. Its launch in March 2010 coincided with that of its direct competitor, AMD's Opteron 6xxx "Magny-Cours".

Most models limit the number of cores and QPI links as well as the L3 cache size in order to get a broader range of products out of the single chip design.

E7-x8xx-series "Westmere-EX"

Main article: List of Intel Nehalem-based Xeon microprocessors § "Westmere-EX" (32 nm) Expandable

Westmere-EX is the follow-on to Beckton/Nehalem-EX and the first Intel processor to have ten CPU cores. The microarchitecture is the same as in the six-core Gulftown/Westmere-EP processor, but it uses the LGA 1567 package like Beckton to support up to eight sockets.

Starting with Westmere-EX, the naming scheme has changed once again, with "E7-xxxx" now signifying the high-end line of Xeon processors using a package that supports larger than two-CPU configurations, formerly the 7xxx series. Similarly, the 3xxx uniprocessor and 5xxx dual-processor series turned into E3-xxxx and E5-xxxx, respectively, for later processors.

Sandy Bridge- and Ivy Bridge-based Xeon

E3-12xx-series "Sandy Bridge"

Main articles: Sandy Bridge and List of Intel Sandy Bridge-based Xeon microprocessors § "Sandy Bridge" (32 nm)

The Xeon E3-12xx line of processors, introduced in April 2011, uses the Sandy Bridge chips that are also the base for the Core i3/i5/i7-2xxx and Celeron/Pentium Gxxx products using the same LGA 1155 socket, but with a different set of features disabled. Notably, the Xeon variants include support for ECC memory, VT-d and trusted execution that are not present on the consumer models, while only some Xeon E3 enable the integrated GPU that is present on Sandy Bridge. Like its Xeon 3400-series predecessors, the Xeon E3 only supports operation with a single CPU socket and is targeted at entry-level workstations and servers. The CPUID of this processor is 0206A7h, the product code is 80623.

E3-12xx v2-series "Ivy Bridge"

Main articles: Ivy Bridge (microarchitecture) and List of Intel Ivy Bridge-based Xeon microprocessors § "Ivy Bridge" (22 nm)

Xeon E3-12xx v2 is a minor update of the Sandy Bridge-based E3-12xx, using the 22 nm shrink, and providing slightly better performance while remaining backwards compatible. They were released in May 2012 and mirror the desktop Core i3/i5/i7-3xxx parts.

E5-14xx/24xx series "Sandy Bridge-EN" and E5-16xx/26xx/46xx-series "Sandy Bridge-EP"

Main articles: Sandy Bridge-E, List of Intel Sandy Bridge-based Xeon microprocessors § "Sandy Bridge-E" (32 nm), § "Sandy Bridge-EN" (32 nm) Entry, and § "Sandy Bridge-EP" (32 nm) Efficient Performance

The Xeon E5-16xx processors follow the previous Xeon 3500/3600-series products as the high-end single-socket platform, using the LGA 2011 package introduced with this processor. They share the Sandy Bridge-E platform with the single-socket Core i7-38xx and i7-39xx processors. The CPU chips have no integrated GPU but eight CPU cores, some of which are disabled in the entry-level products. The Xeon E5-26xx line has the same features but also enables multi-socket operation like the earlier Xeon 5000-series and Xeon 7000-series processors.

E5-14xx v2/24xx v2 series "Ivy Bridge-EN" and E5-16xx v2/26xx v2/46xx v2 series "Ivy Bridge-EP"

Main articles: Ivy Bridge-EN/EP, List of Intel Ivy Bridge-based Xeon microprocessors § Xeon E5-1xxx v2 (uniprocessor), § Xeon E5-2xxx v2 (dual-processor), and § Xeon E5-4xxx v2 (quad-processor)

The Xeon E5 v2 line was an update, released in September 2013 to replace the original Xeon E5 processors with a variant based on the Ivy Bridge shrink. The maximum number of CPU cores was raised to 12 per processor module and the total L3 cache was upped to 30 MB. The consumer version of the Xeon E5-16xx v2 processor is the Core i7-48xx and 49xx.

E7-28xx v2/48xx v2/88xx v2 series "Ivy Bridge-EX"

Main articles: Ivy Bridge-EX, List of Intel Ivy Bridge-based Xeon microprocessors § Xeon E7-28xx v2 (dual-processor), § Xeon E7-48xx v2 (quad-processor), and § Xeon E7-88xx v2 (octa-processor)

The Xeon E7 v2 line was an update, released in February 2014 to replace the original Xeon E7 processors with a variant based on the Ivy Bridge shrink. There was no Sandy Bridge version of these processors but rather a Westmere version.

Haswell-based Xeon

Main article: Haswell (microarchitecture) § Server processors

E3-12xx v3 series "Haswell-WS"

Main article: List of Intel Haswell-based Xeon microprocessors § "Haswell-WS" (22 nm)

Intel Xeon E3-1241 v3 CPU, sitting atop the inside part of its retail box that contains an OEM fan-cooled heatsink

Intel Xeon E3-1220 v3 CPU, pin side

Introduced in May 2013, Xeon E3-12xx v3 is the first Xeon series based on the Haswell microarchitecture. It uses the new LGA 1150 socket, which was introduced with the desktop Core i5/i7 Haswell processors, incompatible with the LGA 1155 that was used in Xeon E3 and E3 v2. As before, the main difference between the desktop and server versions is added support for ECC memory in the Xeon-branded parts. The main benefit of the new microarchitecture is better power efficiency.

E5-16xx/26xx v3 series "Haswell-EP"

Main articles: List of Intel Haswell-based Xeon microprocessors § "Haswell-EN" (22 nm) Entry, and § "Haswell-EP" (22 nm) Efficient Performance

Intel Xeon E5-1650 v3 CPU; its retail box contains no OEM heatsink.

Introduced in September 2014, Xeon E5-16xx v3 and Xeon E5-26xx v3 series use the new LGA 2011-v3 socket, which is incompatible with the LGA 2011 socket used by earlier Xeon E5 and E5 v2 generations based on Sandy Bridge and Ivy Bridge microarchitectures. Some of the main benefits of this generation, compared to the previous one, are improved power efficiency, higher core counts, and bigger last level caches (LLCs). Following the already used nomenclature, Xeon E5-26xx v3 series allows dual-socket operation.

One of the new features of this generation is that Xeon E5 v3 models with more than 10 cores support cluster on die (COD) operation mode, allowing CPU's multiple columns of cores and LLC slices to be logically divided into what is presented as two non-uniform memory access (NUMA) CPUs to the operating system. By keeping data and instructions local to the "partition" of CPU which is processing them, thus decreasing the LLC access latency, COD brings performance improvements to NUMA-aware operating systems and applications.

E7-48xx/88xx v3 series "Haswell-EX"

Main article: List of Intel Haswell-based Xeon microprocessors § "Haswell-EX" (22 nm) Expandable

Introduced in May 2015, Xeon E7-48xx v3 and Xeon E7-88xx v3 series provide higher core counts, higher per-core performance and improved reliability features, compared to the previous Xeon E7 v2 generation. Following the usual SKU nomenclature, Xeon E7-48xx v3 and E7-88xx v3 series allow multi-socket operation, supporting up to quad- and eight-socket configurations, respectively. These processors use the LGA 2011 (R1) socket.

Xeon E7-48xx v3 and E7-88xx v3 series contain a quad-channel integrated memory controller (IMC), supporting both DDR3 and DDR4 LRDIMM or RDIMM memory modules through the use of Jordan Creek (DDR3) or Jordan Creek 2 (DDR4) memory buffer chips. Both versions of the memory buffer chip connect to the processor using version 2.0 of the Intel Scalable Memory Interconnect (SMI) interface, while supporting lockstep memory layouts for improved reliability. Up to four memory buffer chips can be connected to a processor, with up to six DIMM slots supported per each memory buffer chip.

Xeon E7-48xx v3 and E7-88xx v3 series also contain functional bug-free support for Transactional Synchronization Extensions (TSX), which was disabled via a microcode update in August 2014 for Haswell-E, Haswell-WS (E3-12xx v3) and Haswell-EP (E5-16xx/26xx v3) models, due to a bug that was discovered in the TSX implementation.

Broadwell-based Xeon

Main article: Broadwell (microarchitecture) § Server processors

E3-12xx v4 series "Broadwell-H"

Introduced in June 2015, Xeon E3-12xx v4 is the first Xeon series based on the Broadwell microarchitecture. It uses LGA 1150 socket, which was introduced with the desktop Core i5/i7 Haswell processors. As before, the main difference between the desktop and server versions is added support for ECC memory in the Xeon-branded parts. The main benefit of the new microarchitecture is the new lithography process, which results in better power efficiency.

Skylake-based Xeon

Main article: Skylake (microarchitecture) § Server processors

E3-12xx v5 series "Skylake-S"

Introduced in October 2015, Xeon E3-12xx v5 is the first Xeon series based on the Skylake microarchitecture. It uses new LGA 1151 socket, which was introduced with the desktop Core i5/i7 Skylake processors. Although it uses the same socket as consumer processors, it is limited to the C200 server chipset series and will not work with consumer chipsets like Z170. As before, the main difference between the desktop and server versions is added support for ECC memory in the Xeon-branded parts.

Kaby Lake-based Xeon

Main article: Kaby Lake

E3-12xx v6 series

Introduced in January 2017, Xeon E3-12xx v6 is the first Xeon series based on the Kaby Lake microarchitecture. It uses the same LGA 1151 socket, which was introduced with the desktop Core i5/i7 Kaby Lake processors. As before, the main difference between the desktop and server versions is added support for ECC memory and improved energy efficiency in the Xeon-branded parts.

Coffee Lake-based Xeon

Main article: Coffee Lake

Coffee Lake-E (Server/Workstation)

Processor branding	Model	Cores (Threads)	Base CPU clock rate	Max. Turbo clock rate	GPU	max GPU clock rate	L3 cache	TDP	Memory support	Price (USD)
Xeon E	2186G	6 (12)	3.8 GHz	4.7 GHz	UHD P630	1.20 GHz	12 MB	95 W	Up to 64 GB DDR4 2666 ECC memory supported	$506
	2176G		3.7 GHz					80 W		$406
	2174G	4 (8)	3.8 GHz				8 MB	71 W		$370
	2146G	6 (12)	3.5 GHz	4.5 GHz			12 MB	80 W		$350
	2144G	4 (8)	3.6 GHz				8 MB	71 W		$306
	2136	6 (12)	3.3 GHz		N/A		12 MB	80 W		$319
	2134	4 (8)	3.5 GHz				8 MB	71 W		$281
	2126G	6 (6)	3.3 GHz		UHD P630	1.20 GHz	12 MB	80 W		$286
	2124G	4 (4)	3.4 GHz				8 MB	71 W		$245
	2124		3.3 GHz	4.3 GHz	N/A					$217
	2104G		3.2 GHz	N/A	UHD P630	1.20 GHz		65 W		$193

Coffee Lake-E Refresh (Server/Workstation)

Processor branding	Model	Cores (Threads)	Base CPU clock rate	Max. Turbo clock rate	GPU	max GPU clock rate	L3 cache	TDP	Memory support	Price (USD)
Xeon E	2288G	8 (16)	3.7 GHz	5.0 GHz	UHD P630	1.20 GHz	16 MiB	95 W	Up to 128 GB DDR4 2666 ECC memory supported	$539
	2286G	6 (12)	4.0 GHz	4.9 GHz			12 MiB			$450
	2278G	8 (16)	3.4 GHz	5.0 GHz			16 MiB	80 W		$494
	2276G	6 (12)	3.8 GHz	4.9 GHz			12 MiB			$362
	2274G	4 (8)	4.0 GHz				8 MiB	83 W		$328
	2246G	6 (12)	3.6 GHz	4.8 GHz			12 MiB	80 W		$311
	2244G	4 (8)	3.8 GHz				8 MiB	71 W		$272
	2236	6 (12)	3.4 GHz		N/A		12 MiB	80 W		$284
	2234	4 (8)	3.6 GHz				8 MiB	71 W		$250
	2226G	6 (6)	3.4 GHz	4.7 GHz	UHD P630	1.20 GHz	12 MiB	80 W		$255
	2224G	4 (4)	3.5 GHz				8 MiB	71 W		$213
	2224		3.4 GHz	4.6 GHz	N/A					$193

Comet Lake-based Xeon

Main article: Comet Lake

Cascade Lake-based Xeon

Main article: List of Intel Cascade Lake-based Xeon microprocessors

Variants

• Server: Cascade Lake-SP (Scalable Performance; meaning multi physical processors configuration), Cascade Lake-AP (Advanced Performance)
• Workstation: Cascade Lake-W
• Enthusiast: Cascade Lake-X

Cooper Lake-based Xeon

Main article: Cooper Lake (microprocessor)

The 3rd generation Xeon SP processors for 4S and 8S.

Ice Lake-based Xeon

Main article: Ice Lake (microprocessor)

The 3rd generation Xeon SP processors for WS, 1S and 2S.

Rocket Lake-based Xeon

Main article: Rocket Lake

Sapphire Rapids-based Xeon

Main article: Sapphire Rapids (microprocessor)

Introduced in 2023, the 4th generation Xeon Scalable processors (Sapphire Rapids-SP and Sapphire Rapids-HBM) and Xeon W-2400 and W-3400 series (Sapphire Rapids-WS) provide large performance enhancements over the prior generation.

Features

CPU

Further information: Golden Cove (microarchitecture)

• Up to 60 Golden Cove CPU cores per package
• AVX512-FP16
• TSX Suspend Load Address Tracking (TSXLDTRK)
• Advanced Matrix Extensions (AMX)
• Trust Domain Extensions (TDX), a collection of technologies to help deploy hardware-isolated virtual machines (VMs) called trust domains (TDs)
• In-Field Scan (IFS), a technology that allows for testing the processor for potential hardware faults without taking it completely offline
• Data Streaming Accelerator (DSA), allows for speeding up data copy and transformation between different kinds of storage
• QuickAssist Technology (QAT), allows for improved performance of compression and encryption tasks
• Dynamic Load Balancer (DLB), allows for offloading tasks of load balancing, packet prioritization and queue management
• In-Memory Analytics Accelerator (IAA), allows accelerating in-memory databases and big data analytics

Not all accelerators are available in all processor models. Some accelerators are available under the Intel On Demand program, also known as Software Defined Silicon (SDSi), where a license is required to activate a given accelerator that is physically present in the processor. The license can be obtained as a one-time purchase or as a paid subscription. Activating the license requires support in the operating system. A driver with the necessary support was added in Linux kernel version 6.2.

I/O

• PCI Express 5.0
• Direct Media Interface 4.0
• 8-channel DDR5 memory support up to DDR5-4800, up to 2 DIMMs per channel
• On-package High Bandwidth Memory 2e memory as L4 cache on Xeon Max models
• Compute Express Link 1.1

Emerald Rapids-based Xeon

Main article: Emerald Rapids

Granite Rapids-based Xeon

Main article: Granite Rapids

Supercomputers

By 2013 Xeon processors were ubiquitous in supercomputers—more than 80% of the TOP500 machines in 2013 used them. For the fastest machines, much of the performance comes from compute accelerators; Intel's entry into that market was the Xeon Phi, the first machines using it appeared in June 2012 and by June 2013 it was used in the fastest computer in the world.

• The first Xeon-based machines in the top-10 appeared in November 2002, two clusters at Lawrence Livermore National Laboratory and at NOAA.
• The first Xeon-based machine to be in the first place of the TOP500 was the Chinese Tianhe-IA in November 2010, which used a mixed Xeon-Nvidia GPU configuration; it was overtaken by the Japanese K computer in 2012, but the Tianhe-2 system using 12-core Xeon E5-2692 processors and Xeon Phi cards occupied the first place in both TOP500 lists of 2013.
• The SuperMUC system, using eight-core Xeon E5-2680 processors but no accelerator cards, managed fourth place in June 2012 and had dropped to tenth by November 2013
• Xeon processor-based systems are among the top 20 fastest systems by memory bandwidth as measured by the STREAM benchmark.
• An Intel Xeon virtual SMP system using ScaleMP's Versatile SMP (vSMP) architecture with 128 cores and 1 TiB RAM. This system aggregates 16 Stoakley platform (Seaburg chipset) systems with total of 32 Harpertown processors.

See also

• AMD Epyc
• AMD Opteron
• Intel Itanium
• Intel Xeon Phi, brand name for family of products using the Intel MIC architecture
• List of Intel processors
  • List of Intel Xeon processors
• List of Macintosh models grouped by CPU type

External links

• Server processors at the Intel website
• Intel look inside: Xeon E5 v3 (Grantley) launch, Intel, September 2014