ANSI escape code

From Wikipedia, the free encyclopedia
  (Redirected from RM (ANSI))
Jump to: navigation, search

ANSI escape sequences are a standard for in-band signaling to control the cursor location, color, and other options on video text terminals. Certain sequences of bytes, most starting with Esc and '[', are embedded into the text, which the terminal looks for and interprets as commands, not as character codes.

ANSI sequences were introduced in the 1970s to replace vendor-specific sequences and became widespread in the computer equipment market by the early 1980s. They were used by the nascent bulletin board systems to offer improved displays compared to earlier systems lacking cursor movement, a primary reasons they became a standard adopted by all manufacturers.

Although hardware text terminals have become increasingly rare in the 21st century, the relevance of the ANSI standard persists because most terminal emulators interpret at least some of the ANSI escape sequences in output text. One notable exception was the Win32 console of Microsoft Windows before Windows 10 update TH2.[1]

History[edit]

Almost all manufacturers of video terminals added vendor-specific escape sequences to perform operations such as placing the cursor at arbitrary positions on the screen. One example is the VT52 terminal, which allowed the cursor to be placed at an x,y location on the screen by sending the ESC character, a y character, and then two characters representing with numerical values equal to the x,y location plus 32 (thus starting at the ASCII space character and avoiding the control characters).

As these sequences were different for different terminals, elaborate libraries such as termcap and utilities such as tput had to be created so programs could use the same API to work with any terminal. In addition many of these terminals required sending numbers (such as row and column) as the binary values of the characters; for some programming languages, and for systems that did not use ASCII internally, it was often difficult or impossible to turn a number into the correct character.

The ANSI standard attempted to address these problems by making a command set that all terminals would use and requiring all numeric information to be transmitted as ASCII numbers. The first standard in the series was ECMA-48, adopted in 1976. It was a continuation of a series of character coding standards, the first one being ECMA-6 from 1965, a 7-bit standard from which ISO 646 originates. The name "ANSI escape sequence" dates from 1979 when ANSI adopted ANSI X3.64. The ANSI X3L2 committee collaborated with the ECMA committee TC 1 to produce nearly identical standards. These two standards were merged into an international standard, ISO 6429.[2] In 1994, ANSI withdrew its standard in favor of the international standard.

The first popular video terminal to support these sequences was the Digital VT100, introduced in 1978.[3] This model was very successful in the market, which sparked a variety of VT100 clones, among the earliest and most popular of which was the much more affordable Zenith Z-19 in 1979.[4] Others included the Qume QVT-108, Televideo TVI-970, Wyse WY-99GT as well as optional "VT100" or "VT103" or "ANSI" modes with varying degrees of compatibility on many other brands. The popularity of these gradually led to more and more software (especially bulletin board systems) assuming the escape sequences worked, leading to almost all new terminals and emulator programs supporting them.

In 1981, ANSI X3.64 was adopted for use in the US government by FIPS publication 86. Later, the US government stopped duplicating industry standards, so FIPS pub. 86 was withdrawn.[5]

ECMA-48 has been updated several times and is currently at its 5th edition, from 1991. It is also adopted by ISO and IEC as standard ISO/IEC 6429.

Platform support[edit]

The widespread use of ANSI by bulletin boards and online services led to almost universal platform support by the mid 1980s. In most cases this took the form of a terminal emulator (such as xterm on Unix or the OS X Terminal or ZTerm on MacOS and many communication programs for the IBM PC), although there was increasing support in the standard text output of many operating systems.

Unix and the AmigaOS all included some ANSI support in the OS, which led to widespread use of ANSI by programs running on those platforms. Unix-like operating systems could produce ANSI codes through libraries such as termcap and curses used by many pieces of software to update the display. These libraries are supposed to support non-ANSI terminals as well, but this is so rarely tested nowadays that they are unlikely to work.[citation needed] Many games and shell scripts (such as colored prompts) directly write the ANSI sequences and thus cannot be used on a terminal that does not interpret them.

AmigaOS not only interprets ANSI code sequences for text output to the screen, the AmigaOS printer driver also interprets them (with extensions proprietary to AmigaOS) and translates them into the codes required for the particular printer that is actually attached.[6]

In spite of its popularity, ANSI codes were not universally supported. Support was not built-in on the original "classic" Mac OS, while the Atari ST used the command system adapted from the VT52 with some expansions for color support.[7]

Windows and DOS[edit]

MS-DOS 1.x did not support the ANSI or any other escape sequences. Only a few control characters (BEL, CR, LF, BS) were interpreted by the underlying BIOS, making it almost[nb 1] impossible to do any kind of full-screen application. Any display effects had to be done with BIOS calls, which were notoriously slow, or by directly manipulating the IBM PC hardware.

DOS 2.0 introduced the ability to add a device driver for the ANSI escape sequences – the de facto standard being ANSI.SYS, but others like ANSI.COM,[8] NANSI.SYS[9] and ANSIPLUS.EXE are used as well (these are considerably faster as they bypass the BIOS). Slowness and the fact that it was not installed by default made software rarely take advantage of it; instead, applications continued to directly manipulate the hardware to get the text display needed.[citation needed] ANSI.SYS and similar drivers continued to work in Windows 9x up to Windows Me, and in NT-derived systems for 16-bit legacy programs executing under the NTVDM.

The Win32 console did not support ANSI escape sequences at all. Some replacements or additions for the console window such as JP Software's TCC (formerly 4NT), Michael J. Mefford's ANSI.COM, Jason Hood's ANSICON[10] and Maximus5's ConEmu interpreted ANSI escape sequences printed by programs. A Python package[11] internally interpreted ANSI escape sequences in text being printed, translating them to calls to manipulate the color and cursor position, to make it easier to port Python code using ANSI to Windows.

In 2016 with Windows 10 "Threshold 2"[1] Microsoft unexpectedly started supporting ANSI escape sequences in the console app, making the porting of software from (or remote access to) Unix much easier.

Escape sequences[edit]

Sequences have different lengths. All sequences start with the ASCII character ESC (27 / hex 0x1B), followed by a second byte in the range 0x40–0x5F (ASCII @A–Z[\]^_).[12]:5.3.a

The standard says that in 8-bit environments these two-byte sequences can be merged into single byte in the 0x80–0x9F range (for details see C1 control codes).[12]:5.4.a However on modern devices those codes are often used for other purposes, such as parts of UTF-8 or for CP-1252 characters, so only the 2-byte sequence is used.

Other C0 codes besides ESC — commonly BEL, BS, CR, LF, FF, TAB, VT, SO, and SI — may produce similar or identical effects to some control sequences when output.

Some ANSI escape sequences (not a complete list)
Sequence C1 Name Effect
ESC N 0x8e SS2 – Single Shift Two Select a single character from one of the alternate character sets. In xterm, SS2 selects the G2 character set, and SS3 selects the G3 character set.[13]
ESC O 0x8f SS3 – Single Shift Three
ESC P 0x90 DCS – Device Control String Controls a device. In xterm, uses of this sequence include defining User-Defined Keys, and requesting or setting Termcap/Terminfo data.[13]
ESC [ 0x9b CSI - Control Sequence Introducer Most of the useful sequences, see next section. Ends at ASCII 64 to 126 (@ to ~ / hex 0x40 to 0x7E).[12]
ESC \ 0x9c ST – String Terminator Terminates strings in other controls (including APC, DCS, OSC, PM, and SOS).[12]:8.3.143
ESC ] 0x9d OSC – Operating System Command Starts a control string for the operating system to use. OSC sequences are similar to CSI sequences, but are not limited to integer arguments. In general, these control sequences are terminated by ST.[12]:8.3.89 In xterm, they may also be terminated by BEL.[13] For example, in xterm, the window title can be set by OSC 0;this is the window title BEL.
ESC X 0x98 SOS – Start of String Takes an argument of a string of text, terminated by ST. The uses for these string control sequences are defined by the application[12]:8.3.2,8.3.128 or privacy discipline.[12]:8.3.94 These functions are not implemented and the arguments are ignored by xterm.[13]
ESC ^ 0x9e PM – Privacy Message
ESC _ 0x9f APC – Application Program Command
ESC c RIS – Reset to Initial State Resets the device to its original state. This may include (if applicable): reset graphic rendition, clear tabulation stops, reset to default font, and more.

Pressing special keys on the keyboard, as well as outputting many xterm CSI, DCS, or OSC sequences, often produces a CSI, DCS, or OSC sequence, sent from the terminal to the computer as though the user typed it.

CSI sequences[edit]

The ESC [ is followed by any number (including none) of "parameter bytes" in the range 0x30–0x3F (ASCII 0–9:;<=>?), then by any number of "intermediate bytes" in the range 0x20–0x2F (ASCII space and !"#$%&'()*+,-./), then finally by a single "final byte" in the range 0x40–0x7E (ASCII @A–Z[\]^_`a–z{|}~).[12]:5.4

All sequences in common use just use the parameters as a series of semicolon-separated numbers (for instance 1;2;3). Missing numbers are treated as 0 (for instance 1;;3 acts like the middle number is 0, and no parameters at all in ESC[m acts like a 0 reset code). Some sequences (such as CUU) treat 0 as 1 in order to make the missing parameters useful.:F.4.2 Intermediate bytes seem to not be used.[citation needed]

A subset of arrangements was declared "private" so that terminal manufacturers could insert their own sequences without conflicting with the standard. This includes use of the parameter bytes <=>? or the final bytes 0x70–0x7F (p–z{|}~). Examples of private escape codes include the DECTCEM (DEC text cursor enable mode) shown below; it was first introduced for the VT-300 series of video terminals.

The behavior of the terminal is undefined in the case where a CSI sequence contains any character outside of the range 0x20–0x7E. These illegal characters are either C0 control characters (the range 0–0x1F), DEL (0x7F), or bytes with the high bit set. Possible responses are to ignore the byte, to process it immediately, and furthermore whether to continue with the CSI sequence, to abort it immediately, or to ignore the rest of it.[citation needed]

Some ANSI control sequences (not a complete list)
Code Name Effect

CSI n A CUU – Cursor Up Moves the cursor (default 1) cells in the given direction. If the cursor is already at the edge of the screen, this has no effect.

CSI n B CUD – Cursor Down

CSI n C CUF – Cursor Forward

CSI n D CUB – Cursor Back
CSI n E CNL – Cursor Next Line Moves cursor to beginning of the line (default 1) lines down. (not ANSI.SYS)
CSI n F CPL – Cursor Previous Line Moves cursor to beginning of the line (default 1) lines up. (not ANSI.SYS)
CSI n G CHA – Cursor Horizontal Absolute Moves the cursor to column (default 1). (not ANSI.SYS)

CSI n ; m H CUP – Cursor Position Moves the cursor to row , column . The values are 1-based, and default to 1 (top left corner) if omitted. A sequence such as CSI ;5H is a synonym for CSI 1;5H as well as CSI 17;H is the same as CSI 17H and CSI 17;1H

CSI n J ED – Erase in Display Clears part of the screen. If is 0 (or missing), clear from cursor to end of screen. If is 1, clear from cursor to beginning of the screen. If is 2, clear entire screen (and moves cursor to upper left on DOS ANSI.SYS). If is 3, clear entire screen and delete all lines saved in the scrollback buffer (this feature was added for xterm and is supported by other terminal applications).

CSI n K EL – Erase in Line Erases part of the line. If is zero (or missing), clear from cursor to the end of the line. If is one, clear from cursor to beginning of the line. If is two, clear entire line. Cursor position does not change.

CSI n S SU – Scroll Up Scroll whole page up by (default 1) lines. New lines are added at the bottom. (not ANSI.SYS)

CSI n T SD – Scroll Down Scroll whole page down by (default 1) lines. New lines are added at the top. (not ANSI.SYS)

CSI n ; m f HVP – Horizontal Vertical Position Same as CUP

CSI n m SGR – Select Graphic Rendition Sets SGR parameters, including text color. After CSI can be zero or more parameters separated with semicolon. If none, CSI m is treated as CSI 0 m (reset / normal).

CSI 5i AUX Port On Enable aux serial port usually for local serial printer

CSI 4i AUX Port Off Disable aux serial port usually for local serial printer

CSI 6n DSR – Device Status Report Reports the cursor position (CPR) to the application as (as though typed at the keyboard) ESC[n;mR, where is the row and is the column.)

CSI s SCP – Save Cursor Position Saves the cursor position.

CSI u RCP – Restore Cursor Position Restores the cursor position.
CSI ?25l DECTCEM Hides the cursor. (Note: the trailing character is lowercase L.)
CSI ?25h DECTCEM Shows the cursor.

SGR (Select Graphic Rendition) parameters[edit]

Code Effect Note
0 Reset / Normal all attributes off
1 Bold or increased intensity
2 Faint (decreased intensity) Not widely supported.
3 Italic Not widely supported. Sometimes treated as inverse.
4 Underline
5 Slow Blink less than 150 per minute
6 Rapid Blink MS-DOS ANSI.SYS; 150+ per minute; not widely supported
7 reverse video swap foreground and background colors
8 Conceal Not widely supported.
9 Crossed-out Characters legible, but marked for deletion. Not widely supported.
10 Primary(default) font
11–19 Alternate font Select alternate font
20 Fraktur hardly ever supported
21 Bold off or Double Underline Bold off not widely supported; double underline hardly ever supported.
22 Normal color or intensity Neither bold nor faint
23 Not italic, not Fraktur
24 Underline off Not singly or doubly underlined
25 Blink off
27 Inverse off
28 Reveal conceal off
29 Not crossed out
30–37 Set foreground color See color table below
38 Set foreground color Next arguments are 5;n or 2;r;g;b, see below
39 Default foreground color implementation defined (according to standard)
40–47 Set background color See color table below
48 Set background color Next arguments are 5;n or 2;r;g;b, see below
49 Default background color implementation defined (according to standard)
51 Framed
52 Encircled
53 Overlined
54 Not framed or encircled
55 Not overlined
60 ideogram underline or right side line hardly ever supported
61 ideogram double underline or
double line on the right side
62 ideogram overline or left side line
63 ideogram double overline or
double line on the left side
64 ideogram stress marking
65 ideogram attributes off reset the effects of all of 6064
90–97 Set bright foreground color aixterm (not in standard)
100–107 Set bright background color aixterm (not in standard)

Colors[edit]

3/4 bit[edit]

The original specification only had 8 colors, and just gave them names. The SGR parameters 30-37 selected the foreground color, while 40-47 selected the background. Quite a few terminals implemented "bold" (SGR code 1) as a brighter color rather than a different font, thus providing 8 additional foreground colors. Usually you could not get these as background colors, though sometimes inverse video (SGR code 7) would allow that. Examples: to get black letters on white background use ESC[30;47m, to get red use ESC[31m, to get bright red use ESC[31;1m. To reset colors to their defaults, use ESC[39;49m (not supported on some terminals), or reset all attributes with ESC[0m. Later terminals added the ability to directly specify the "bright" colors with 90-97 and 100-107.

When hardware started using 8-bit DACs several pieces of software assigned 24-bit color numbers to these names. The chart below shows values sent to the DAC for some common hardware and software.[citation needed]

Name FG Code BG Code VGA[nb 2] CMD[nb 3] Terminal.app PuTTY mIRC xterm X[nb 4] Ubuntu[nb 5]
Black 30 40 0,0,0 1,1,1
Red 31 41 170,0,0 128,0,0 194,54,33 187,0,0 127,0,0 205,0,0 255,0,0 222,56,43
Green 32 42 0,170,0 0,128,0 37,188,36 0,187,0 0,147,0 0,205,0 0,255,0 57,181,74
Yellow 33 43 170,85,0[nb 6] 128,128,0 173,173,39 187,187,0 252,127,0 205,205,0 255,255,0 255,199,6
Blue 34 44 0,0,170 0,0,128 73,46,225 0,0,187 0,0,127 0,0,238[14] 0,0,255 0,111,184
Magenta 35 45 170,0,170 128,0,128 211,56,211 187,0,187 156,0,156 205,0,205 255,0,255 118,38,113
Cyan 36 46 0,170,170 0,128,128 51,187,200 0,187,187 0,147,147 0,205,205 0,255,255 44,181,233
White 37 47 170,170,170 192,192,192 203,204,205 187,187,187 210,210,210 229,229,229 255,255,255 204,204,204
Bright Black 30;1 100 85,85,85 128,128,128 129,131,131 85,85,85 127,127,127 127,127,127 128,128,128
Bright Red 31;1 101 255,85,85 255,0,0 252,57,31 255,85,85 255,0,0 255,0,0 255,0,0
Bright Green 32;1 102 85,255,85 0,255,0 49,231,34 85,255,85 0,252,0 0,255,0 144,238,144 0,255,0
Bright Yellow 33;1 103 255,255,85 255,255,0 234,236,35 255,255,85 255,255,0 255,255,0 255,255,224 255,255,0
Bright Blue 34;1 104 85,85,255 0,0,255 88,51,255 85,85,255 0,0,252 92,92,255[15] 173,216,230 0,0,255
Bright Magenta 35;1 105 255,85,255 255,0,255 249,53,248 255,85,255 255,0,255 255,0,255 255,0,255
Bright Cyan 36;1 106 85,255,255 0,255,255 20,240,240 85,255,255 0,255,255 0,255,255 224,255,255 0,255,255
Bright White 37;1 107 255,255,255 255,255,255 233,235,235 255,255,255 255,255,255 255,255,255 255,255,255

8-bit[edit]

As 256-color lookup tables became common on graphic cards, escape sequences were added to select from a pre-defined set of 256 colors:[citation needed]

   ESC[ … 38;5;<n> … m Select foreground color
   ESC[ … 48;5;<n> … m Select background color
   0x00-0x07:  standard colors (as in ESC [ 30–37 m)
   0x08-0x0F:  high intensity colors (as in ESC [ 90–97 m)
   0x10-0xE7:  6 × 6 × 6 cube (216 colors): 16 + 36 × r + 6 × g + b (0 ≤ r, g, b ≤ 5)
   0xE8-0xFF:  grayscale from black to white in 24 steps
256-color mode — foreground: ESC[38;5;#m   background: ESC[48;5;#m
Standard colors High-intensity colors
 0   1   2   3   4   5   6   7   8   9  10 11 12 13 14 15
216 colors
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87
88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123
124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159
160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195
196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231
Grayscale colors
232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255

24-bit[edit]

As "true color" graphic cards with 16 to 24 bits of color became common, Xterm,[13] KDE's Konsole,[16] as well as all libvte based terminals[17] (including GNOME Terminal) support ISO-8613-3 24-bit foreground and background color setting[better source needed][18]

   ESC[ … 38;2;<r>;<g>;<b> … m Select RGB foreground color
   ESC[ … 48;2;<r>;<g>;<b> … m Select RGB background color

The ITU's T.416 Information technology - Open Document Architecture (ODA) and interchange format: Character content architectures[19] which was adopted as ISO/IEC International Standard 8613-6 gives an alternative version that seems to be less supported:

   ESC[ … 38:2:<r>:<g>:<b>:<unused>:<CS tolerance>:<Color-Space: 0="CIELUV"; 1="CIELAB">m Select RGB foreground color
   ESC[ … 48:2:<r>:<g>:<b>:<unused>:<CS tolerance>:<Color-Space: 0="CIELUV"; 1="CIELAB">m Select RGB background color

Note that this uses the otherwise reserved ':' character to separate the sub-options which may have been a source of confusion for real-world implementations. It also documents using '3' as the second parameter to specify colors using a Cyan-Magenta-Yellow scheme and '4' for a Cyan-Magenta-Yellow-Black one, the latter using the position marked as "unused" in the above examples for the Black component.

Xterm allows also setting colors by X11 color names using[13]

   ESC]10;<foreground>BEL
   ESC]11;<background>BEL

where <foreground> and <background> are text, and BEL is the ASCII BEL character (code 7). The closing bracket instead of an opening bracket reveals that it belongs to the operating system control commands.

Examples[edit]

CSI 2 J — This clears the screen and, on some devices, locates the cursor to the y,x position 1,1 (upper left corner).

CSI 32 m — This makes text green. On MS-DOS, normally the green would be dark, dull green, so you may wish to enable Bold with the sequence CSI 1 m which would make it bright green, or combined as CSI 32 ; 1 m. MS-DOS ANSI.SYS uses the Bold state to make the character Bright; also the Blink state can be set (via INT 10, AX 1003h, BL 00h) to render the Background in the Bright mode. MS-DOS ANSI.SYS does not support SGR codes 90–97 and 100–107 directly.

CSI 0 ; 6 8 ; "DIR" ; 13 p — This reassigns the key F10 to send to the keyboard buffer the string "DIR" and ENTER, which in the DOS command line would display the contents of the current directory. (MS-DOS ANSI.SYS only) This was sometimes used for ANSI bombs. This is a private-use code (as indicated by the letter p), using a non-standard extension to include a string-valued parameter. Following the letter of the standard would consider the sequence to end at the letter D.

CSI s — This saves the cursor position. Using the sequence CSI u will restore it to the position. Say the current cursor position is 7(y) and 10(x). The sequence CSI s will save those two numbers. Now you can move to a different cursor position, such as 20(y) and 3(x), using the sequence CSI 20 ; 3 H or CSI 20 ; 3 f. Now if you use the sequence CSI u the cursor position will return to 7(y) and 10(x). Some terminals require the DEC sequences ESC 7 / ESC 8 instead which is more widely supported.

Example of use in shell scripting[edit]

ANSI escape codes are often used in UNIX and UNIX-like terminals to provide syntax highlighting. For example, on compatible terminals, the following list command color-codes file and directory names by type.

ls --color

Users can employ escape codes in their scripts by including them as part of standard output or standard error. For example, the following GNU sed command embellishes the output of the make command by displaying lines containing words starting with "WARN" in reverse video and words starting with "ERR" in bright yellow on a dark red background (letter case is ignored). The representations of the codes are highlighted.[20]

make 2>&1 | sed -e 's/.*\bWARN.*/\x1b[7m&\x1b[0m/i' -e 's/.*\bERR.*/\x1b[93;41 m&\x1b[0m/i'

The following Bash function flashes the terminal (by alternately sending reverse and normal video mode codes) until the user presses a key.[21]

flasher () { while true; do printf \\e[?5h; sleep 0.1; printf \\e[?5l; read -s -n1 -t1 && break; done; }

This can be used to alert a programmer when a lengthy command terminates, such as with make ; flasher .[22]

printf \\033c

This will reset the console, similar to the command reset on modern Linux systems; however it should work even on older Linux systems and on other (non-Linux) UNIX variants.

Invalid and ambiguous sequences in use[edit]

  • The Linux console uses OSC P n rr gg bb to change the palette, which, if hard-coded into an application, may hang other terminals. However, appending ST will be ignored by Linux and form a proper, ignorable sequence for other terminals.[citation needed]
  • On the Linux console, certain function keys generate sequences of the form CSI [ char. The CSI sequence should terminate on the [.
  • Old versions of Terminator generate SS3 1; modifiers char when F1–F4 are pressed with modifiers. The faulty behavior was copied from GNOME Terminal.[citation needed]
  • xterm replies CSI row ; column R if asked for cursor position and CSI 1 ; modifiers R if the F3 key is pressed with modifiers, which collide in the case of row == 1. This can be avoided by using the ? private modifier, which will be reflected in the response.[clarification needed]
  • many terminals prepend ESC to any character that is typed with the alt key down. This creates ambiguity for uppercase letters and symbols @[\]^_, which would form C1 codes.[clarification needed]
  • Konsole generates SS3 modifiers char when F1–F4 are pressed with modifiers.[clarification needed]

See also[edit]

Notes[edit]

  1. ^ The screen display could be replaced by drawing the entire new screen's contents at the bottom, scrolling the previous screen up sufficiently to erase all the old text. The user would see the scrolling, and the hardware cursor would be left at the very bottom. Some early batch files achieved rudimentary "full screen" displays in this way.
  2. ^ Typical colors that are used when booting PCs and leaving them in text mode, which used a 16-entry color table. The colors are different in the EGA/VGA graphic modes.
  3. ^ As of Windows XP
  4. ^ Above color name from X11 rgb.txt color database, with "light" prefixed for the bright colors.
  5. ^ For virtual terminals, from /etc/vtrgb.
  6. ^ On terminals based on CGA compatible hardware, such as ANSI.SYS running on DOS, this normal intensity foreground color is rendered as Orange. CGA RGBI monitors contained hardware to modify the dark yellow color to an orange/brown color by reducing the green component. See this ansi art as an example.

References[edit]

  1. ^ a b Grehan, Oisin (2016-02-04). "Windows 10 TH2 (v1511) Console Host Enhancements". Retrieved 2016-02-10. 
  2. ^ Historical version of ECMA-48
  3. ^ Williams, Paul (2006). "Digital's Video Terminals". VT100.net. Retrieved 2011-08-17. 
  4. ^ Heathkit Company (1979). "Heathkit Catalog 1979". Heathkit Company. Archived from the original on 2012-01-13. Retrieved 2011-11-04. 
  5. ^ Withdrawn FIPS Listed by Number
  6. ^ "Amiga Printer Command Definitions". Commodore. Retrieved 2013-07-10. 
  7. ^ "Using C-Kermit", p. 88.
  8. ^ Mefford, Michael (1989-02-07). "ANSI.com: Download It Here". PC Magazine. Retrieved 2011-08-10. 
  9. ^ Kegel, Dan; Auer, Eric (1999-02-28). "Nansi and NNansi – ANSI Drivers for MS-DOS". Dan Kegel's Web Hostel. Retrieved 2011-08-10. 
  10. ^ Hood, Jason (2005). "Process ANSI escape sequences for Windows console programs". Jason Hood's Home page. Retrieved 2013-05-09. 
  11. ^ "colorama 0.2.5 :". Python Package Index. Retrieved 2013-08-17. 
  12. ^ a b c d e f g h "Standard ECMA-48: Control Functions for Coded Character Sets" (Fifth ed.). Ecma International. June 1991. 
  13. ^ a b c d e f "XTerm Control Sequences". invisible-island.net. 2014-01-13. Retrieved 2014-04-13. 
  14. ^ Changed from 0,0,205 in July 2004 "Patch #192 – 2004/7/12 – XFree86 4.4.99.9". 
  15. ^ Changed from 0,0,255 in July 2004 "Patch #192 – 2004/7/12 – XFree86 4.4.99.9". 
  16. ^ "color-spaces.pl (a copy of 256colors2.pl from xterm dated 1999-07-11)". KDE. 2006-12-06. 
  17. ^ "libvte's bug report and patches". GNOME Bugzilla. 2014-04-04. Retrieved 2016-06-05. 
  18. ^ "README.moreColors". KDE. 2010-04-22. 
  19. ^ "T.416 Information technology - Open Document Architecture (ODA) and interchange format: Character content architectures". 
  20. ^ "Chapter 9. System tips". debian.org. 
  21. ^ "VT100.net: Digital VT100 User Guide". Retrieved 2015-01-19. 
  22. ^ "bash – How to get a notification when my commands are done – Ask Different". Retrieved 2015-01-19. 

External links[edit]