Jump to content

Pindad Badak

From Wikipedia, the free encyclopedia
Badak
Badak FSV during test.
TypeFire support vehicle
Place of originIndonesia
Service history
In service2022–present
Used byIndonesia
Production history
DesignerPindad
Designed2013
Produced2014–present
Specifications
Mass12.5 tons (empty), 14 tons (full)
Length6 m (20 ft)
Width2.5 m (8.2 ft)
Height2.9 m (9.5 ft)
Crew3

ArmorSTANAG 4569 level 3, can be up armoured to level 4[1]
Main
armament
Cockerill 90 mm MkIII M-A1 gun mounted on Cockerill CSE 90LP turret
Secondary
armament
7.62 mm machine gun
EngineDiesel inline 6, turbocharged and intercooled
(340 HP)
SuspensionDouble wishbone suspension, 6x6 wheeled
Operational
range
600 km (370 mi)
Maximum speed 80 km/h (50 mph)

The Pindad Badak is a 6×6 fire support vehicle designed and produced by PT Pindad. The name Badak means rhinoceros in Indonesian.

Development

[edit]

A prototype of the Anoa fire-support version (FSV) using an Alvis AC 90 turret with the Cockerill 90 mm MkIII M-A1 gun was first unveiled at Indo Defence & Aerospace 2008,[2] it was announced that the APS-3 fire-support version would be deployed into the Indonesian Army services by 2010.[3]

The final, definitive version of the fire support variant was then unveiled at Indo Defence & Aerospace 2014 known as the Badak. The Badak featured a new design with all-welded monocoque steel hull with STANAG 4569 Level 3 protection, a new 340 hp power pack located at the front left and the driver now seated on the right side (beside the engine), leaving the remainder of the hull clear for the installation of the turret. The suspension also utilises double wishbone independent suspension (as opposed to torsion bar on the Anoa) for better stability while firing the 90 mm canon. The CMI Defence CSE 90LP two-person turret has a baseline protection of up to STANAG 4569 Level 1 (upgradable to Level 4) and is armed with a 90 mm low-pressure rifled gun. In addition, there is a 7.62 mm co-axial machine gun, with another 7.62 mm machine gun mounted on the left side of the turret roof for use in the limited air and self-defence roles, and also two-banks (four each) of 76 mm smoke grenade projectors on either side of the turret.[4][5]

PT Pindad has signed a contract with Ireland's Timoney Technologies during IDEX 2017 at Abu Dhabi, UAE for a customised Timoney modular drive-line, transfer case, and steering system to upgrade the Badak 6×6 fire support vehicle drive train.[6]

A Pindad Badak with a mockup turret of the Oerlikon Skyranger was shown during Indo Defence 2022 Expo & Forum.[7]

User

[edit]
  •  Indonesia: Initially 50 vehicles would be built. As of 2018, the order was reduced from 50 to 14 vehicles. It is intended to replace the Alvis Saladin.[8]

See also

[edit]

References

[edit]
  1. ^ AL (21 December 2015). "Transformasi Sang Badak Revo". JakartaGreater. Retrieved 9 March 2021.
  2. ^ "Panser Terbaru Pindad Bersenjata Kanon" (in Indonesian). PT Pindad. 2008-11-19. Archived from the original on 2012-01-30. Retrieved 2013-01-17.
  3. ^ "Pindad Rancang Panser Canon" (in Indonesian). Tempo Interactive. 2008-08-29. Archived from the original on 2009-03-17. Retrieved 2008-12-10.
  4. ^ "Badak armed vehicle makes debut at show - Indo14-Day3". Jane's Information Group. 2014-11-06. Archived from the original on 2015-01-01. Retrieved 2015-01-01.
  5. ^ "BPT Pindad and CMI unveil the BADAK (Rhinoceros) with Cockerill CSE 90P turret at IndoDefence 2014". Army Recognition. 2014-11-06. Retrieved 2015-01-01.
  6. ^ "Indonesia's PT Pindad, Irish Timoney Sign Contract To Upgrade Badak 6x6 Mobility System At IDEX". www.defenseworld.net. Retrieved 2018-09-11.
  7. ^ Rahmat, Ridzwan (7 November 2022). "Indo Defence 2022: Rheinmetall offers local production of Skyranger GBAD system for Indonesia". Janes.com. Retrieved 2022-11-08.
  8. ^ "PT. Pindad (Persero) - Jusuf Kalla Pesan 50 Panser Badak Buatan Pindad". Pindad.com. Archived from the original on 4 February 2016. Retrieved 4 February 2016.
[edit]