Wikipedia:Reference desk/Science: Difference between revisions
Line 398: | Line 398: | ||
:Safer from what? [[Traffic collision|Crashes]]? [[Mugging (robbery)|Mugging]]? [[Molestation]]? [[Travel sickness]]? All risks combined? {The poster formerly known as 87.81.230.195} [[Special:Contributions/90.201.110.135|90.201.110.135]] ([[User talk:90.201.110.135|talk]]) 01:34, 14 March 2011 (UTC) |
:Safer from what? [[Traffic collision|Crashes]]? [[Mugging (robbery)|Mugging]]? [[Molestation]]? [[Travel sickness]]? All risks combined? {The poster formerly known as 87.81.230.195} [[Special:Contributions/90.201.110.135|90.201.110.135]] ([[User talk:90.201.110.135|talk]]) 01:34, 14 March 2011 (UTC) |
||
:Google searches generally seem to say that any forward facing seat is fine, with some people opining that the seats immediately behind the driver are safest, but none of that seems to have any statistics or any objective research behind it. [http://karakullake.blogspot.com/2008/11/safest-and-best-seat-on-bus.html This] guy says that the best seat is towards the middle, though it's played more for humour. [[User:Matt Deres|Matt Deres]] ([[User talk:Matt Deres|talk]]) 02:22, 14 March 2011 (UTC) |
:Google searches generally seem to say that any forward facing seat is fine, with some people opining that the seats immediately behind the driver are safest, but none of that seems to have any statistics or any objective research behind it. [http://karakullake.blogspot.com/2008/11/safest-and-best-seat-on-bus.html This] guy says that the best seat is towards the middle, though it's played more for humour. [[User:Matt Deres|Matt Deres]] ([[User talk:Matt Deres|talk]]) 02:22, 14 March 2011 (UTC) |
||
:Seats at the rear of aircraft or trains are safer, so I expect that rear of buses is also. Wear the seatbelt if the bus has one. But I think bus travel is safer than car travel. [[Special:Contributions/92.15.11.100|92.15.11.100]] ([[User talk:92.15.11.100|talk]]) 12:28, 14 March 2011 (UTC) |
|||
= March 14 = |
= March 14 = |
Revision as of 12:29, 14 March 2011
of the Wikipedia reference desk.
Main page: Help searching Wikipedia
How can I get my question answered?
- Select the section of the desk that best fits the general topic of your question (see the navigation column to the right).
- Post your question to only one section, providing a short header that gives the topic of your question.
- Type '~~~~' (that is, four tilde characters) at the end – this signs and dates your contribution so we know who wrote what and when.
- Don't post personal contact information – it will be removed. Any answers will be provided here.
- Please be as specific as possible, and include all relevant context – the usefulness of answers may depend on the context.
- Note:
- We don't answer (and may remove) questions that require medical diagnosis or legal advice.
- We don't answer requests for opinions, predictions or debate.
- We don't do your homework for you, though we'll help you past the stuck point.
- We don't conduct original research or provide a free source of ideas, but we'll help you find information you need.
How do I answer a question?
Main page: Wikipedia:Reference desk/Guidelines
- The best answers address the question directly, and back up facts with wikilinks and links to sources. Do not edit others' comments and do not give any medical or legal advice.
March 10
Cyclohexane smell
Why does cyclohexane smell like acetone? --70.244.234.128 (talk) 00:49, 10 March 2011 (UTC)
- I don't think that they do. Cyclohexane has a sweet smell like benzene while acetone has a harsh smell. 75.41.110.200 (talk) 02:34, 10 March 2011 (UTC)
- It has the same sort of "chemical" smell as acetone (and many other synthetic organic compounds, like paint, paint thinner, etc.). --70.244.234.128 (talk) 00:06, 11 March 2011 (UTC)
A "fuel savings device" question
I've read the articals here on fuel saving devices and understand that there is limited to no evidence of the value of the devices or the claims made by manufacturers. It appears that virtually all fuel saving devices are either additive based or impact the air flow and fuel mixture. However, I came across this (http://www.gfchips.com/fordf150.aspx) device that uses a computer chip to improve fuel economy, etc. Is there any validity to this company's approach (especially given the old adadage: if it sounds too good to be true, it probably is . . .")? 99.250.117.26 (talk) 01:14, 10 March 2011 (UTC)
- I think if that chip really worked Ford would have done it already. Especially 60 more horsepower? They would love that. Even if this company thought of something Ford didn't, Ford has to be aware of it and would reverse engineer it. But one thing that really stood out is that they have a chip for every car in existence, and I'm sorry but there is no way in the world that is possible. Ariel. (talk) 02:14, 10 March 2011 (UTC)
- It's a scam. See reviews here. --Stephan Schulz (talk) 10:21, 10 March 2011 (UTC)
- I won't speak to this specific chip-model, which may be a scam. But electronic engine control is a real thing, and does improve fuel efficiency. Ford calls this EDIS and VCT; Honda calls it VTEC; and so on; these are special cases of an Engine Control Unit, a sophisticated computer/electronic box that "makes the engine go." The auto manufacturer usually "tunes" the car's ECU software, hardware, and the engine's mechanical systems for the best average performance. However, after-market "engine-chipping" is also a real thing - especially on the performance auto-enthusiast circuit (amateur racers and the like). You can tune for best performance for certain driving conditions. Here's a brief article Chip the engine which should give you an overview of the subject.
- Will engine chipping give you 60 extra horsepower? Unlikely. Your engine has peak performance numbers; you can mechanically alter the engine to improve those specs, but not by a whole lot; and playing with your valve-timing isn't going to give you 50% more gas-mileage or horsepower. Custom engine-chipping will do things like moving your torque curve around so you get the car's peak performance at a different engine RPM; and it definitely can change your fuel efficiency (for better or for worse)! And as always, mucking with your car's ECU can be risky - if you screw up, you can permanently damage your car's mechanical systems, requiring costly repairs. Nimur (talk) 16:21, 10 March 2011 (UTC)
cdma2000
Hi there. Not really a _science_ question, but does anyone happen to know the theoretical ratio between the channel power (1.23 MHz bandwidth) and the RMS power for a cdma2000 SR1 signal? 80.254.147.84 (talk) 02:11, 10 March 2011 (UTC)
CDMA-2000 is pretty spectrum-filling, so I would "assume" for theoretical purposes that the spectrum is "flat" across the entire channel, and has a specified 3-dB frequency (or specified frequency rolloff rate). Since the signal is a digital QAM constellation with ~64 elements, it is actually pretty nasty when viewed as a pure frequency-spectrum; "theoretically" you should have 64 perfect frequency spikes; but as you of course know, the practical reality is that you have a fuzzy signal whose frequency-spread is determined by your QAM circuit's phase-noise specification. I doubt there's any use to construct a "thorough" theoretical model of the channel power - can you measure it? Otherwise, I'd report the channel power in watts per hertz (or mW/MHz, or other convenient unit), by "assuming" total RMS signal power divided by bandwidth; and spend some time spec`ing the out-of-band frequency rolloff to clean up my estimate. Two app-notes I found on the web search: Linear's AN99 LT5528 WCDMA ACPR, AltCPR and Noise Measurements discussing practical details for measurement; and Tektronix Digital Modulation technical series, Measuring ACPR of W-CDMA Signals with a Spectrum Analyzer. Don't underestimate the power of vendor app-notes - no matter how specific your need, you can probably search the major spectrum-analyzer manufacturers' public libraries, and if you've bought their equipment, you may be able to phone one of their engineers to discuss horrible engineering details with an experienced person. Nimur (talk) 16:46, 10 March 2011 (UTC)
- Thanks for the info. The problem is not so much measuring the signal parameters - I have a waveform that purports to be cdma2000, but which has a 99% OBW of 1.275 MHz (as against the CHP bandwidth of 1.23 MHz). I was wondering if that was correct, and, if not, how incorrect it is. You're probably right that a more specialist arena is a better place for this sort of question, though. 80.254.147.84 (talk) 16:45, 11 March 2011 (UTC)
entanglement
would entanglement support the conclusion that given two entangled particles at some large distance apart, if one of the particles were to somehow cease to exist that the other would simultaneously cease to exist? —Preceding unsigned comment added by 98.221.254.154 (talk) 05:03, 10 March 2011 (UTC)
- Presumably you want a longer answer, and to start with particles can't just cease to exist - they always turn into something else. And even if they did it does not mean the other one will too. If anything it would be the reverse - one particles ceases to exist, the other ones doubles. (That doesn't actually happen, but it's more realistic than the reverse.) Ariel. (talk) 08:09, 10 March 2011 (UTC)
- It's fairly misleading to comment on what physics would do if you forced it to violate itself. —Preceding unsigned comment added by 129.67.37.227 (talk) 14:12, 10 March 2011 (UTC)
- I agree - Ariel's first response, while ultra-brief, was probably the appropriate one! Trying to trace out the consequences of a physical contradiction only leads to more bizarre contradictions. Particles can not cease to exist. If you come up with a realistic physical scenario, we can apply some established rules of quantum-mechanics to model what would happen. For example, if a particle decays, then we can model the trajectories of the decay products, and see how the quantum wave-functions would propagate to (and affect) the entangled partner particle. But when you ask a "what if...", all we can meaningfully say is "then our rules don't apply, so we can't answer that." Nimur (talk) 16:55, 10 March 2011 (UTC)
- It's fairly misleading to comment on what physics would do if you forced it to violate itself. —Preceding unsigned comment added by 129.67.37.227 (talk) 14:12, 10 March 2011 (UTC)
I thought one of them could be annihilated with antiparticle?? —Preceding unsigned comment added by 165.212.189.187 (talk) 18:32, 10 March 2011 (UTC)
- You appear to misunderstand what annihilation means. Please see Annihilation - at least the introduction. -- kainaw™ 18:36, 10 March 2011 (UTC)
- Perhaps the OP is thinking of one particle falling into a black hole? I have a meagre understanding of QM but wouldn't then the entanglement be destroyed but not the particle? Blakk and ekka 18:46, 10 March 2011 (UTC)
- No effect of entanglement is detectable with measurements on only one particle. So if you "throw the other particle away" in the sense that you never measure anything about it again, entanglement ceases to matter, though it's theoretically still there. Throwing a particle into a black hole is one way of getting rid of it, but there are easier ways. -- BenRG (talk) 00:52, 11 March 2011 (UTC)
"Since energy and momentum must be conserved, the particles are not actually made into nothing, but rather into new particles. Antiparticles have exactly opposite additive quantum numbers from particles, so the sums of all quantum numbers of the original pair are zero." OK, So one particle could be made into new particles while the other might not be? —Preceding unsigned comment added by 165.212.189.187 (talk) 19:06, 10 March 2011 (UTC)
- If the two particles are entangled, then any operator that acts on the wavefunction of Particle 1 can cause the wavefunction of Particle 2 to change. That is not synonymous with "the decay of Particle 1 forces the decay of Particle 2." It means that the operator must modify both wave-functions. Tragically, in efforts to "simplify" descriptions of quantum-mechanical treatments, pop-science books do not emphasize the precise nature of this statement: both wave-functions may be affected is not the same as information was transferred, nor the particles are linked together, nor the action on particle 1 caused an action on particle 2. Two entangled particles form a composite quantum-mechanical system. Certain operators must act on the composite system. The composite system's final result will depend on the operator and the composite system's prior quantum state. The state of either particle is a subset of the composite system. Nimur (talk) 20:46, 10 March 2011 (UTC)
- "Any operator that acts on the wavefunction of Particle 1 can cause the wavefunction of Particle 2 to change" is incorrect. There's only one wavefunction, which describes the entire system. If the particles aren't entangled then you can factor the wavefunction into a product of separate wave functions for each particle, but if they are entangled then you can't. That's one way of defining entanglement. -- BenRG (talk) 00:52, 11 March 2011 (UTC)
- If the two particles are entangled, then any operator that acts on the wavefunction of Particle 1 can cause the wavefunction of Particle 2 to change. That is not synonymous with "the decay of Particle 1 forces the decay of Particle 2." It means that the operator must modify both wave-functions. Tragically, in efforts to "simplify" descriptions of quantum-mechanical treatments, pop-science books do not emphasize the precise nature of this statement: both wave-functions may be affected is not the same as information was transferred, nor the particles are linked together, nor the action on particle 1 caused an action on particle 2. Two entangled particles form a composite quantum-mechanical system. Certain operators must act on the composite system. The composite system's final result will depend on the operator and the composite system's prior quantum state. The state of either particle is a subset of the composite system. Nimur (talk) 20:46, 10 March 2011 (UTC)
Yes or no, can one decay and not the other? —Preceding unsigned comment added by 98.221.254.154 (talk) 00:41, 11 March 2011 (UTC)
- Yes, one can decay and not the other. For example, one could be an electron (stable) and the other a neutron (unstable). They don't have to be particles of the same type. But "decay" doesn't mean "cease to exist". Decaying doesn't destroy entanglement. -- BenRG (talk) 00:54, 11 March 2011 (UTC)
Sorry, so there could be more than one "particle" in an entangled "pair"?98.221.254.154 (talk) 01:47, 11 March 2011 (UTC)
- Yes, any number of particles can be entangled. -- BenRG (talk) 03:26, 11 March 2011 (UTC)
Is every particle in our galaxy entangled with every other one? —Preceding unsigned comment added by 165.212.189.187 (talk) 14:41, 11 March 2011 (UTC)
- Yes, I suppose so. (Slightly.) -- BenRG (talk) 09:02, 13 March 2011 (UTC)
Myasthenia Gravis
What is the right way of presentation "Myasthenic crisis" or "Myasthenia Crisis"? aniketnik 10:06, 10 March 2011 (UTC) — Preceding unsigned comment added by Aniketnik (talk • contribs)
- To describe the occurrence of symptoms in a person with myasthenia gravis, you would call it a "myasthenic crisis." --- Medical geneticist (talk) 11:01, 10 March 2011 (UTC)
Feeling cold in the morning and body weight
Hello. When I wake up in the morning, I have a cold sensation that usually lasts an hour or more. When I mentioned about this to a friend, he said he has experienced the same, and it's related to having a metabolism that effieciently converts extra energy into heat, and that this is probably why we're both thin while we eat a lot and don't get much exercise. Could this be the case? 212.68.15.66 (talk) 10:09, 10 March 2011 (UTC)
- If I were you I'd see a doctor. We're not allowed to give medical advice. --TammyMoet (talk) 20:02, 10 March 2011 (UTC)
- I'm not ill, why would I? I've always felt chilly in the morning, but in fact I've been very healthy, I hardly ever catch any disease. What I'm asking is whether the "super metabolism" could explain the chilly feeling and my apparent "immunity" of gaining too much weight. 212.68.15.66 (talk) 07:50, 11 March 2011 (UTC)
- OP it is quite possible for you to be quite ill without being aware of it! My original advice still stands. --TammyMoet (talk) 13:56, 11 March 2011 (UTC)
- In my opinion you're overreacting, as there is nothing that suggest that the OP is ill in any way. I've always felt a bit cold when I wake up, and I too have been very healthy. Time for some LOGIC: The OP mentions his/her friend has experienced the same, and I also feel cold in the mornings usually for half an hour. Therefore, it's probably rather common, and if feeling cold in the mornings was related to a common medical condition, we would probably know about. On the other hand, it might be a symptom of a very slowly advancing terminal disease... but my money's on Looie496's suggestion on reluctance to leave the warm bed behind. Zakhalesh (talk) 20:46, 11 March 2011 (UTC)
- I can think of two conditions which match the symptoms described by the OP, but our prohibition on diagnosing mean I can't even mention them. Both conditions are common in the Western world, and can remain undiagnosed for many years, silently causing many problems which, if diagnosis had been made earlier, would not have occured. --TammyMoet (talk) 21:23, 11 March 2011 (UTC)
- Since interpreting everything as a sign of a disease is itself a disease, you'd better get yourself to a doctor right away, Tammy. :-) StuRat (talk) 00:45, 12 March 2011 (UTC)
- I'm actually speaking to mine on Monday because I suffer from one of the conditions I was writing of... --TammyMoet (talk) 10:04, 12 March 2011 (UTC)
- I don't know what "a cold sensation" means. Nearly everybody experiences a circadian rhythm of body temperature in which the temperature drops during the night and rises around daybreak. Whether there is anything unusual about your sensations is unclear without a better description. Lots of people are averse to getting out from under warm covers on a chilly morning. (I don't consider this medical advice.) Looie496 (talk) 23:02, 10 March 2011 (UTC)
- A few points:
- 1) If you turn the temperature down at night (or have an automatic thermostat that does so), it may actually be colder. Even if the temp is turned back up by the time you get out of bed, it still may take some time for the house to get up to the new temperature.
- 2) Activity warms you up, and a bit of exercise in the morning might do the trick.
- 3) It might be warmer in your bedroom, particularly under the covers, due to your body heat overnight, and walking into another room may cool you down. This seems to especially be a problem with bare feet on uncarpeted floors, as in the bathroom or kitchen. A cold toilet seat will also wake you right up. StuRat (talk) 00:50, 12 March 2011 (UTC)
- It may just be a side-effect of wearing light clothing. I like to keep my bedroom cool. When I get up in the morning at this time of year, from under the warm bedclothes, I feel cold until I put on some warm clothing. You may just be not wearing warm enough clothing. Your body has to use extra energy to keep itself warm, hence you do not get fat. Feeling cold in the morning is a small price to pay for being perpetually slim - lucky you. 92.15.11.100 (talk) 13:23, 14 March 2011 (UTC)
Will Global Warming cause the Moon recede faster or slower from the Earth?
Global Warming will cause sea level rise. This will have some effect on the tidal friction the Moon experiences, causing the rate at which it recedes from the Earth to change a bit. Will this rate increase or decrease? Count Iblis (talk) 15:02, 10 March 2011 (UTC)
- It will recede faster. With more liquid water instead of solid, the tidal friction will increase, so the moon's recession will occur faster. For partial support of that statement, see the second paragraph of Tidal acceleration#Angular momentum and energy. Red Act (talk) 15:24, 10 March 2011 (UTC)
- On the other hand, by melting ice into water some of the mass that is now near the poles will move closer to the equator changing earth's Moment of inertia slowing down its rotation and therefore increasing the time between a high tide and the following low tide reducing the rate of the motion of the tides around the planet and decreasing the pace with which the moon is moving away from the earth :). Dauto (talk) 01:45, 11 March 2011 (UTC)
- And note that any effect would be so slight it would be difficult or impossible to even measure. StuRat (talk) 00:39, 12 March 2011 (UTC)
Hmmm, wouldn't the change in total lengths of coast lines be a factor here, as this ultimately provides for the friction that moves the tidal bulge ahead of the Moon? It seems to me that this could change quite dramatically if e.g. all the ice on Antarctica were to melt, but I'm still not sure if this woild increase or decrease the recession rate.Count Iblis (talk) 15:28, 12 March 2011 (UTC)
Chemical catalog
In a chemical catalog item description, what is the meaning of something like (N/10)? For example, "Hydrocholric acid solution, 0.1N (N/10)". I am looking specifically at Cole Parmer and I've been unable to find any explanation in their information. ike9898 (talk) 16:56, 10 March 2011 (UTC)
- N means 'normality'; it's a way to express concentration. See Concentration#Normality for details. TenOfAllTrades(talk) 17:53, 10 March 2011 (UTC)
- Well, I understand that, but is "0.1N (N/10)" any but just completely redundant? ike9898 (talk) 19:30, 10 March 2011 (UTC)
- Why would redundancy be bad? The catalog wants to sell to people who use different methods of expressing concentration, and it's in their interest to make the concentration instantly understandable to both sets of people. - Nunh-huh 20:42, 12 March 2011 (UTC)
Solution of NaOH at 40% m/m
I need to prepare a 100ml solution of NaOH at 40% m/m (in water). As NaOH absorbs the humidity in air, I have consulted an old Handbook, section sodium hydroxyde, concentration properties of, in varying concentrations but I am still unsure as to how much NaOH (in grams) I need. Please help.
Thank you very much. --192.197.51.41 (talk) 18:06, 10 March 2011 (UTC)
- First, the preparation of weight/weight solutions is tackled by our RefDesk's foremost competitor here.
- I should add that I'm a bit surprised to see "m/m" or "mass/mass" coming up. It seems from searches that this is in vogue for recent homework problems. On the one hand, yes, the number on the balance is in grams of mass; on the other, what the balance measures is weight.
- Now the real question you have is what the purity of the NaOH is. You could run various tests on it, or try to purify it e.g. by baking it at high temperature to drive out the water, but the traditional chem lab way to handle the problem is to titrate the sodium hydroxide solution after you've made it, against a known standard. In this way you can adjust the molarity to be exactly right, and therefore the m/m value. (Though usually people titrate to get an exact molarity rather than an m/m value) Wnt (talk) 20:53, 10 March 2011 (UTC)
- Thanks, I got it figured out. --192.197.51.41 (talk) 22:20, 10 March 2011 (UTC)
Does copier or printer ink contain metal?
I was wondering whether photocopier ink or laser-printer ink contains any metallic substances or metal compounds?
Thanks. 71.252.113.85 (talk) 20:37, 10 March 2011 (UTC)
- It depends on the ink. Our article toner may help. Most toner is pure carbon (say, graphite powder), or something similar (like carbon black), but may also include a plasticizer, a binder, one or more liquid solvents, and so on. In general, these are synthetic polymers. Colored ink may contain pigment, which may include synthetic polymers, or metallic pigments. Nimur (talk) 20:51, 10 March 2011 (UTC)
- Is it possible for the polymers in black copier or printer ink to be magnetic? 71.252.113.85 (talk) 03:03, 11 March 2011 (UTC)
- Definitely possible to formulate a magnetic ink--see MICR. DMacks (talk) 18:37, 12 March 2011 (UTC)
- But is ordinary ink magnetic? 71.252.113.85 (talk) 19:56, 14 March 2011 (UTC)
- Definitely possible to formulate a magnetic ink--see MICR. DMacks (talk) 18:37, 12 March 2011 (UTC)
- Xerography in photocopiers often use the metalloid selenium, which is not likely found in the ink. ~AH1(TCU) 02:28, 13 March 2011 (UTC)
- Is it possible for the polymers in black copier or printer ink to be magnetic? 71.252.113.85 (talk) 03:03, 11 March 2011 (UTC)
- Some ink has metal in it by design. It's so magnetic character readers can read them. The line of numbers on the bottom of checks is one example of this. One such technology is called MICR - Magnetic Ink Character Recognition. thx1138 (talk) 22:50, 15 March 2011 (UTC)
- http://en.wikipedia.org/wiki/MICR
Probability cloud of a free electron?
Would the probability cloud of a free electron look the same as an electron in the ground state bound to a hydrogen atom? ScienceApe (talk) 20:40, 10 March 2011 (UTC)
- No, not as far as I can tell. Until you get a better answer, consider these related questions: why would you think that the electron_cloud would look the same in both cases? Compared to a 'free electron' (presumably with no other particles around), an electron bound in hydrogen has at least a few additional forces acting on it, especially the electric field generated by the proton. Shouldn't this difference in forces change the shape of the probability cloud (and perhaps radically so)? SemanticMantis (talk) 22:40, 10 March 2011 (UTC)
- No --Gr8xoz (talk) 22:31, 10 March 2011 (UTC)
Without a nucleus to bind the cloud, the autorepulsion will cause the cloud formation to disolve. Plasmic Physics (talk) 22:41, 10 March 2011 (UTC)
- Here's the problem. You can't formulate a wavefunction for an electron in free space. Let's trace out how we do it for a simplified quantum mechanical treatment of an electron in an Hydrogen atom: (see our article on Hydrogen atom, particularly the solution of the wave function.
- First, define a coordinate system by assuming the proton to be heavy and therefore immobile. (The hydrogen proton is located at the origin).
- Now, define the Coulomb potential - for practical purposes, this is , where r is the radius from the origin. (How can you define the coordinate-system of the free electron, if there's no reference origin? You have to pick an origin at random, which isn't a problem, but then there's zero potential energy gradient, and so the electron has a probability of being anywhere relative to your undefined origin).
- Solve the Schrodinger equation using the Coulomb potential and normalize using physical constraints (probability that the electron exists somewhere must equal 1).
- So, in free space - you don't have anything to define your wave-function, and the electron can be anywhere. The only thing you can do is measure an electron - determine its current state (its momentum and its position, subject to the uncertainty principle), and then you can predict where it will be next (which is, of course, anywhere, since it is unbound). When you measure it again, at some other position/momentum, the principle of indistinguishability means you can not know whether you've measured the same or a different electron! So, there's no way to predict the position of an electron in an unbound system (no defined coulomb potential). It has an equal probability of being anywhere; and anything you measure has a likelihood of being a different electron. Nimur (talk) 23:29, 10 March 2011 (UTC)
- This is completely wrong. See Wave packet. Truthforitsownsake (talk) 02:17, 11 March 2011 (UTC)
- Well, in actuality, I never apply quantum-mechanics when I'm describing free electrons. Most of the time, I can treat my plasmas as a superposition of an electron gas and an ion gas, and solve using classical or relativistic electrodynamics. By the very nature of the involved length, time, and energy scales, quantum-mechanical properties are less relevant to free electron clouds, in practice. I'm not surprised that my attempt to describe a quantum mechanical system for an electron gas sounds awkward. I respectfully disagree that my explanation is "completely wrong" - I think it's completely correct, although it's surely "stretching the limits of the conventional application of quantum mechanics." Nimur (talk) 14:54, 11 March 2011 (UTC)
- The hydrogen atom orbitals are a complete basis for smooth electron wave functions that approach zero at infinity, so they don't tell you anything about the electron by themselves. An electron that's nowhere near the nucleus can still be described by a sum of these solutions. The only thing that's special about them is that they're energy eigenstates. If you remove the nucleus, leaving the background potential zero everywhere, then it's no longer possible to write down a basis of energy eigenstates, but I think that's just a pathological corner case. You can still work in some other basis like a wave-packet basis, or you can write down energy eigenstates if you add, say, a single nucleus a billion light years away. -- BenRG (talk) 02:35, 11 March 2011 (UTC)
- This is completely wrong. See Wave packet. Truthforitsownsake (talk) 02:17, 11 March 2011 (UTC)
magnetic earth
will we ever know for sure what is inside of the earth or if it is hollow will we ever know for sure what causes the earth's magnetic field — Preceding unsigned comment added by Lufc88 (talk • contribs) 21:41, 10 March 2011 (UTC)
- I think we're pretty sure about the structure of the Earth. Is there any reason you don't believe the scientific explanations presented in that article? Geology and geophysics are evidence-based sciences, and there is a lot of evidence to back up the current theories. Have a read at those articles for details on the experimental toolkits available to help scientists gather evidence about Earth's interior. Nimur (talk) 21:46, 10 March 2011 (UTC)
- We will never know anything about the world for sure, we could just be hallucinating or in a computer simulation. We have a rather good model for the structure of the earth, we may never know some finer details but as long as we can trust the measurements the overall structure are known, it is not hollow and could not be hollow since no known material would be strong enough to keep it from collapsing. --Gr8xoz (talk) 22:41, 10 March 2011 (UTC)
- For why we know the Earth isn't hollow, see Hollow Earth#Contrary evidence. Also, the interior of the Earth has been mapped in detail using seismic tomography, without any evidence of any hollow space; see Seismology#Seismic waves.
- As per Earth's magnetic field#Field characteristics, the currently accepted theory is that the Earth's magnetic field is primarily due to electric currents in the (liquid) outer core, similar to an electromagnet. This is called the dynamo theory, although a numeric model of the Earth's magnetic field consistent with the dynamo theory has not yet been achieved. Red Act (talk) 22:45, 10 March 2011 (UTC)
how can we prove that it is the dynamo effect any ideas — Preceding unsigned comment added by Lufc88 (talk • contribs) 22:49, 11 March 2011 (UTC)
- The main way is by comparing Earth with other (terrestrial) planets and moons which lack a magnetic field. Venus doesn't appear to have one, and Mars appears to have a relatively weak one, as does our Moon. So, if these lack the molten iron outer core of the Earth, that's fairly good evidence that this is the reason. The Moon shows little evidence of recent volcanism, so that supports it being solid, not liquid. Mars shows signs of massive ancient volcanoes, but less activity more recently. More study is needed there. Venus is difficult to study, due to it's thick cloud cover and corrosive atmosphere. StuRat (talk) 00:31, 12 March 2011 (UTC)
March 11
18 year Lunar Perigee effects on tides?
I saw an article yesterday that said in mid-March the moon will be as close to the earth as it ever gets ("lunar perigee"), and that this is an 18 year cycle. Sadly, nothing of the sort is mentioned in Orbit of the Moon. I have two questions: 1) is this true and where on Wikipedia can I read more about it? 2) will this cause record high tides? if yes, what would the tidal variation be between the moon at its closest and furthest orbital positions? The Masked Booby (talk) 00:50, 11 March 2011 (UTC)
- The mentioned 18 year cycle is probably a Saros cycle, which governs eclipses. The moon reaches perigee about once a lunar month, but the exact timing with respect to the phase of the moon changes. The Full moon cycle of about a year-and-a-bit would be the closest connection between lunar perigees and the size of tides -- we get the largest tides when the moon is close to us just at a spring tide. The Saros cycle arises from the interference between the full moon cycle and the moon's periodic movement north and south of the ecliptic (which also happens about once a month but again only roughly, due to the precession of the lunar orbit). –Henning Makholm (talk) 02:11, 11 March 2011 (UTC)
- Henning has given an excellent response. On a general level do you remember (assuming you are old enough) any 'record' tides 18 years ago when the same circumstances pertained. I don't, and I've experienced more lunar phases than I care to mention ;-) Richard Avery (talk) 07:26, 11 March 2011 (UTC)
Diet theory
As far as I remember body stores excess energy in fat. If I have lost weight by eating less, does it follow that my body has used my fat instead of food, and since there is no fat available I should eat more now and I won`t get fat again? 89.235.211.162 (talk) 01:18, 11 March 2011 (UTC)
- As our dieting article states, weight loss usually means that one has lost both fat mass and muscle mass. Could you rephrase your last sentence? It didn't make logical sense to me. I must mention that your questions about this may be deleted, or go unanswered, if you ask questions about your body, because that touches on our no-medical-advice policy — I would recommend asking questions about a hypothetical generic human instead. Comet Tuttle (talk) 01:43, 11 March 2011 (UTC)
- Eating is not a medical issue and it is a biology question. I don`t see what is there not to understand. A person eats less. He or she loses weight. Assumption is that weight loss is result of body being forced to use fat to get necessary energy. Would it be healthier if person wouls start eating more, given that there is no more fat reserves to dig in? Will increasing food consumtion result in weight gain or will the body convert all food into energy stright away? 89.235.211.162 (talk) 02:46, 11 March 2011 (UTC)
- If a person takes in more calories than they expend, the body will have a net positive amount of "energy" and will store it as fat. If a person takes in fewer calories than they expend, the body will have a net negative amount of "energy" and will respond by breaking down fat stores, then muscle if insufficient fat stores remain. If a person's caloric intake and expenditures are roughly equal, they will remain the same. One of Comet Tuttle's points was that what you (the OP) "should" do is dependent on a whole variety of factors and isn't really in the domain of the reference desk. It is doubtful that you have completely eliminated all of your fat stores, and we don't have any way of knowing whether you have altered your basal metabolic rate in the course of your weight loss (by increasing lean muscle mass, for example), or if your daily activity level has significantly increased (thus requiring higher caloric intake simply to break even). So, whether or not you can "eat more" without gaining the weight back is impossible to answer. The bottom line is that you can simply use a scale to weigh yourself (pick one time of the day and try to be consistent). This will answer your question. --- Medical geneticist (talk) 03:08, 11 March 2011 (UTC)
- No, I moved to diffrent town for my studies, the only thing I altered was how much I eat, because I don`t like to cook and was hardly ever hungry. I like the result. However lately I am feeling hungry more often, although I eat as much as usually. Hence I wonder. 89.235.211.162 (talk) 04:21, 11 March 2011 (UTC)
- Beware of yoyo dieting: losing weight, then gaining more back. It is the usual result of dramatic dieting and weightloss, because your body adapts to the lack of calories and starts to lay fat down more easily. If you find, in a few months time, you are heavy than you were before the weightloss, the only way to definitely break the cycle of steady weightgain is to not diet. 86.163.4.134 (talk) 09:42, 11 March 2011 (UTC)
- I think I understand the logic behind your question. Let me state what I think you meant to ask, then answer that:
- "Since we have fixed number of fat cells, if I eliminate all of them by dieting, will it then be impossible for me to gain weight since I no longer have any fat cells in which to store additional fat ?"
- OK, the biggest flaw with that theory is that fat cells just shrink when you lose body fat, they don't disappear entirely. They can be removed, via surgery, but not all of them. This leads to the remaining fat cells getting even larger, and having many small fat cells provides for a smoother looking body than a few huge ones. But, if we could theoretically eliminate all of our fat cells, what would happen ? I suspect that you would die, or at least get diabetes, as burning fat is important to bridging long gaps between meals. And, on the other extreme, when you ate a big meal, if it couldn't be stored as fat, would your blood sugar skyrocket ? StuRat (talk) 00:07, 12 March 2011 (UTC)
- Incidentally, one reason why you may be hungrier now is that you aren't getting all the nutrients you need. If you had an unhealthy diet, but ate 10x as much as you should have, then you might have managed to get all the vital nutrients just by volume, whereas now, if you continue to have an unhealthy diet, but just eat less, you may have deficiencies, leading you to crave more food. Make sure you have a healthy diet, and this problem should go away. StuRat (talk) 00:13, 12 March 2011 (UTC)
- No, I wasn`t aware that number of cells is fixed, I thought body generates new cells and eliminates old cells (to extent, at least). I am acctualy concerned of the effect anonymous poster before you mentioned. So let me rephrase. I believe I am hungry because my body has depleted its fat reserves and wants to get more energy from food now. Up until now I ate as much as I craved, but I am worried that because of whole yo-yo dieting deal my body wants me to eat more than I acctualy need. So should I eat as much as I crave or only a little bit more? 84.52.32.137 (talk) 00:30, 12 March 2011 (UTC)
- If eating as much as you craved made you overweight before, I suspect that it would do so, again. But, as I said, the answer to cravings isn't to eat more junk, it's to eat the proper amounts of the right things. StuRat (talk) 01:02, 12 March 2011 (UTC)
- I ate what my parents served, not junk, though possibly too much bread, matter of fact I`ve been eating more junk food while losing weight than ever before. I currently eat stuff from all major food groups, mostly salad. So I see your point as valid, but I doubt it applies here (besides I guess lacking specific nutrients would cause cravings for a particular product, which contains them) 84.52.32.137 (talk) 01:26, 12 March 2011 (UTC)
- Cravings aren't necessarily that specific. And if you've been eating more junk food while losing weight, that supports the idea that you may be malnourished. Salad is a good component of a healthy diet (although the common iceberg lettuce is almost devoid of nutrients), but you might not be getting enough protein. For that you need meat, dairy, beans, or nuts. StuRat (talk) 06:08, 12 March 2011 (UTC)
- But all salad normaly contain dairy products, meat and vegetables. Just because I eat fast food once in two weeks dosen`t mean I am malnorished. I learned what is healthy diet in elementary school, no need to educate me on that. I said it is a theoretical question - assume that there are no other factors than quantity and tell me, if it is wiser to increase food consumtion as much as I feel or increase it by little less 89.235.214.143 (talk) 17:10, 12 March 2011 (UTC)
- Increase the quantity a small amount at a time, until you start to gain weight, then pull back a bit, to keep your weight steady. As for your statement that "all salads normally contain dairy products, meat and vegetables", that's not true, many have no meat or dairy products. I suspect that you are getting things like a Cobb Salad, which has all sorts of things in addition to a standard garden salad. Such "salads" may actually be quite unhealthy. Try a garden salad, on occasion, too, and skip the rich bleu cheese dressings in favor of a simply vinaigrette. StuRat (talk) 21:59, 12 March 2011 (UTC)
- Any fluctuations and reductions in your weight will probably fluctuate around your normal body weight. ~AH1(TCU) 02:21, 13 March 2011 (UTC)
- In the place where I live it is the traditional understanding of what `salad` means, I buy them ready made at grocery store (as I said I don`t like to cook) and they haven`t gotten down the method of producing tasty salad with any other dressing. But anyway thanks, I don`t know why, but idea of letting it fluctuate around slightly and ajusting as needed hadn`t occured to me. 89.235.214.143 (talk) 02:56, 13 March 2011 (UTC)
- I don't like to cook much either, but making a salad isn't cooking. With raw ingredients like "baby cut" carrots, cherry tomatoes, and a bag of spinach, you can assembly a salad quite quickly (I just had one for dinner). I like to rinse the ingredients, then just drain, mix and eat. The only problem I've had is they sell huge bags of spinach which tend to rot before I finish them. Still, I bet a do-it-yourself salad will be both cheaper and healthier than a pre-made salad. StuRat (talk) 09:04, 13 March 2011 (UTC)
monopole
what would happen if you took a bunch of magnets shaped like a pyramid (with one pole at the top point and the other pole at the wide base) and then glued them together with all the top points facing in? —Preceding unsigned comment added by 98.221.254.154 (talk) 02:00, 11 March 2011 (UTC)
- Your description of a magnetic "pole" as a point is unfortunately oversimplified. The simplest magnetic moment is inherently described as a dipole. A magnetic "pole" doesn't exist at one specific position in the magnet: it is an effective orientation - a preferred direction - that is built into the magnet. Complex ferromagnets have an effective average dipole moment, and so it's fun to draw this as a "north" pole region and a "south" pole region, but in truth, what you have is an net average orientation of all the individual microscopic orientations that make up the magnet. As such, the "north pole" doesn't exist "at the point" of the pyramid, nor the "south pole" at the "wide base." The entire magnet is polarized. Nimur (talk) 02:14, 11 March 2011 (UTC)
- (ec) Their magnetic fields would cancel each other out, and only leave a slight inwards-pointing field in the middle of the faces of the resulting polyhedron, and a slight outwards-pointing field at the corners, or vice versa. Some distance from the compound object (say, two radii from the center) there would be practically no net field. –Henning Makholm (talk) 02:18, 11 March 2011 (UTC)
- Ah yes, I didn't actually answer the original question! So, to directly answer what would happen: I can't quite follow the geometry the OP is envisioning, but it sounds like you've got a bunch of magnets oriented so that they want to repel each other. Well, if you squish them together, and maybe glue them in place, the result will be that from far away, you'll have an effectively larger, but weaker, magnet. And if you get really close near any of the individual pyramid-shaped magnets, you will find that your magnetic field is best described as a superposition of several individually-oriented dipole fields. (You might even find a way to mathematically re-represent that as one single higher-order moment, if you're pretty slick with math). Nimur (talk) 02:19, 11 March 2011 (UTC)
- It could also be modelled as a superposition of two perpendicular linear quadrupoles, so I suppose it is an octopole. —Preceding unsigned comment added by 129.67.37.227 (talk) 02:41, 11 March 2011 (UTC)
- Is it correct to compare a magnetic monopole to a one sided coin? Plasmic Physics (talk) 09:29, 11 March 2011 (UTC)
- I don't mean a trick coin where both sides are either heads or tails, I mean a coin with literally only one side. Plasmic Physics (talk) 09:32, 11 March 2011 (UTC)
- No. An electron is a "monopole" for charge after all. We have never found one for magnetism, but that doesn't mean it's illogical in the way a one sided coin (in a 3D world) is. Ariel. (talk) 10:00, 11 March 2011 (UTC)
- I get the concept of a charge monopole, what would be a correct analogy then? Plasmic Physics (talk) 10:07, 11 March 2011 (UTC)
- An electric charge monopole is totally described by its position and its charge magnitude. A magnetic dipole must include, at the minimum, its position, magnitude, and orientation. If you want to try and stretch this analogy, you could say a "magnetic monopole would be sort of like an arrow that doesn't point in any direction." In a sense, a magnetic dipole must be oriented - it's built in to the definition of a dipole to have a vector orientation; and our theory of magnetism requires the elementary magnetic unit to be a dipole. In the same way, if you had an arrow and it didn't point in any direction, ... well, you wouldn't have an arrow anymore. Nimur (talk) 14:47, 11 March 2011 (UTC)
- I don't agree with all of the above. There sure is room in our current theory of magnetism for magnetic monopoles. Read 't Hooft–Polyakov monopole. That's why the search for a magnetic monopole is not considered a fool's errand. But they have never been observed and it is possible that they simply do not exist. A better analogy for the meaning of a monopole would be a rug that has been combed down away from a central position. Dauto (talk) 16:03, 11 March 2011 (UTC)
- Insofar as you mean magnetic field lines would emanate from a monopole, yielding the hypothetical Gauss's law for magnetism, - yes, that is how we would mathematically describe as a magnetic monopole, if it exists. And we would draw it on paper the way Dauto describes it. Is there room in our theory for it? Sure, with minor modification of Maxwell's equations, we could trivially add a magnetic monopole term; but to make those modified equations fit with experimental observation of physical reality will be a much more subtle and challenging problem. My tendency is to believe that the magnetic monopole does not exist, and is a contradiction against everything we physically observe about magnets, even if we could write equations to describe what it would hypothetically look like. Future experiment may disprove my belief - you're right that it's not futile (and indeed, is a worthwhile avenue for experimental physicists to pursue); so I'm open to the unlikely possibility of discovery of a magnetic charge. Nimur (talk) 16:35, 11 March 2011 (UTC)
- The modified equation's fit just fine with experimental observations. I would like to clarify the point that 't Hooft–Polyakov monopoles are predicted to exist by the standard model of particles, so they are not as fringe as one might think. Dauto (talk) 16:48, 11 March 2011 (UTC)
- Shouldn't the q m be rho? Either that or replace the differential left hand side with integral B.dA ...(sorry i cant use TeX at the time) Dauto, they're not fringe, but many people consider them as one of the many flaws of the standard model. ManishEarthTalk • Stalk 04:04, 15 March 2011 (UTC)
- Yes, I could have used "rho", "magnetic charge density," for parity with the conventional notation of Gauss's law in electrostatics. Sorry for my imprecision/incorrect equation. I suppose this begs the question whether hypothetical magnetic monopoles would be continuously distributed "charge density clouds" or discrete elemental charges - a can of worms I don't want to open. Nimur (talk) 16:47, 15 March 2011 (UTC)
- Shouldn't the q m be rho? Either that or replace the differential left hand side with integral B.dA ...(sorry i cant use TeX at the time) Dauto, they're not fringe, but many people consider them as one of the many flaws of the standard model. ManishEarthTalk • Stalk 04:04, 15 March 2011 (UTC)
- The modified equation's fit just fine with experimental observations. I would like to clarify the point that 't Hooft–Polyakov monopoles are predicted to exist by the standard model of particles, so they are not as fringe as one might think. Dauto (talk) 16:48, 11 March 2011 (UTC)
Drugs
What affects do drugs have on the mitochondria in humans? How are other organelles affected? Albacore (talk) 02:20, 11 March 2011 (UTC)
- Which drugs? We can't even begin to answer the question without specifics. --- Medical geneticist (talk) 02:55, 11 March 2011 (UTC)
- Well, uncoupling agents are defined by their ability to (essentially) break down the electrical resistance of the mitochondrial membrane e.g. by acting as proton ionophores, discharging its energy unproductively. Oh, and rotenone works a different way, jamming the electron transfer apparatus. Wnt (talk) 04:42, 11 March 2011 (UTC)
Big rip or Big crunch?
Is it more likely for the universe to end in the concept "big rip" or "big crunch"? — Preceding unsigned comment added by Lightylight (talk • contribs) 04:29, 11 March 2011 (UTC)
- Our article on the ultimate fate of the universe notes that current scientific data supports an open universe. That viewpoint is incompatible with a "big crunch", but does not necessarily support a "big rip" scenario. — Lomn 04:38, 11 March 2011 (UTC)
- That article also says that the Big Freeze is "currently the most commonly accepted theory within the scientific community". There are a couple of variants of that scenario, depending on whether protons can or cannot ever decay. Gandalf61 (talk) 14:58, 11 March 2011 (UTC)
Zoologist specialising in Lepidoptera, "Busck", active beginning to mid C20?
Hi all,
The usual question: any clues about entomologist with either abbreviation "Busck." or full family name "Busck"? Binomial authority for Ypsolopha querciella amongst a whole lotta others. Google is not being friendly. Sounds Scandinavian, and first name initial may be "A".
Thank you! --Shirt58 (talk) 09:52, 11 March 2011 (UTC)
- The "A" would appear to be "August" and his publications are listed at WorldCat. SpinningSpark 11:05, 11 March 2011 (UTC)
A F Braun, Lepidoptera, active mid C20
Hi all - same again. Binomial authority for Parectopa geraniella inter alia. Apologies for being such a bother. --Shirt58 (talk) 10:09, 11 March 2011 (UTC)
- Annette F Braun [1], [2]. SpinningSpark 11:34, 11 March 2011 (UTC)
Japanese and Chinese earthquakes
Could there be any connection between the two earthquakes, or are they just coincidence? Thanks. 92.24.186.163 (talk) 14:06, 11 March 2011 (UTC)
- As a first-order answer, "no, these are just coincidences." To explain in more detail, scientists have been studying earthquakes for a long time, and there are many theories about triggering earthquakes. There's a certain plausibility about massive geological events (like a powerful earthquake) affecting a geographically distant fault and triggering another earthquake; but unfortunately the data record is not clean enough to make a solid, scientific conclusion. Scientists have also investigated more indirect triggers for earthquakes, such as magnetic interactions between large sections of the Earth's interior; glacier, sediment, ocean/tidal, and other "variable" geological overburden loads, and so on. If you're interested, here are a few historically notable research papers: Earthquakes Cannot Be Predicted (1996); and my personal favorite work on earthquake prediction, Scientists debate new evidence for electromagnetic earthquake predictors (1991). (This paper triggered much heated debate). As you can see, most scientists do not believe there is any geological, seismic/teleseismic, electromagnetic, nor any pattern of animal behavior, nor any "telepsychic" method, that can predict earthquake incidence. But, reputable scientists continue to seek any sort of signals that might indicate earthquake precursors, or solidly indicate that one earthquake triggered a second one. Nimur (talk) 15:16, 11 March 2011 (UTC)
Thanks, interesting papers which I shall read, although the question is if there could be any connection between them, which is a different from asking about predicting them. 2.97.212.204 (talk) 16:22, 11 March 2011 (UTC)
- Valid consideration: it's really two sides of the same coin. If Earthquake A causes Earthquake B, then there must be some physical mechanism (like a propagating seismic wave from A that disrupts the rock material strength along the fault-line for B). If there is such a connection, we should be able to observe it - or at least, identify what hypothetical "perfect, noiseless measurement instrument" would be required to observe it. And if we can observe A and measure its effects, we should be able to predict Event B. So the distinction between "A triggers B" and "A allows seismologists to predict B" is fairly moot. This is conceptually described with more rigorous scientific precision in the literature I linked. Nimur (talk) 16:45, 11 March 2011 (UTC)
Not really. Prediction is about things in the future, this is asking about things happening at the same time. In economics or finance, for example, there are series which are random and unpredictable yet which have a relationship with each other - in other words they may show Cointegration or Correlation. You've also forgotten that A and B may both be caused by some other factor. 92.15.24.90 (talk) 19:41, 11 March 2011 (UTC)
- Earthquakes mostly are the result of movement of tectonic plates. Japan happens to lay on thee diffrent plates and there have been two previous earthquakes in the same region of China in recent years. If you take a look at maps in articles on both quakes and the ones on earthquake, you`ll see that they appear to be on different edges of Eurasian plate, close to diffrent fault lines and are moving in diffrent directions. It can be a coincidence. Though of course it could be that Eurasian plate has become particulary active. ~~Xil (talk) 21:37, 11 March 2011 (UTC)
- To add to the list, there have been a number of large earthquakes in New Zealand lately, including the most recent one in Christchurch, and increased volcanic and seismic activity in Hawaii. One theory I've heard is that the Moon may cause this, by being closer than it has for the last 18 years (I'm not sure if this is true, the question posed a few above this should hopefully provide and answer). Since the Moon causes tides (along with the Sun), in water, and also causes hidden tides in the solid portion of the Earth (in the form of both stress and strain), it's not impossible that the Moon's gravitational effect could trigger quakes. Now, if so, the question would come up as to why it's all in the Western Pacific. Perhaps that region was "ready to blow" for other reasons, and the Moon just provided the spark. StuRat (talk) 23:54, 11 March 2011 (UTC)
- The whole region is nutorious for seismic activity. See Pacific Ring of Fire for some statistics ~~Xil (talk) 00:54, 12 March 2011 (UTC)
- Yes, but it appears to have increased recently. And I congratulate you on your "nutorious" spelling. :-) StuRat (talk) 00:59, 12 March 2011 (UTC)
- There is no evidence of any increase in seismic activity that I'm aware of. Rates of earthquake occurrence appear to be constant since seismograph recordings began at about 1900[3]. Mikenorton (talk) 12:26, 12 March 2011 (UTC)
- I mean quite recent quakes, like in the past month. There definitely seem to be more big ones in this time-frame, than for the average month. However, as noted below, some clustering of big quakes is to be expected, even if they are random. StuRat (talk) 21:48, 12 March 2011 (UTC)
I heard on tv two scientists say that earthquakes did tend to cluster together in time, even though they are in different places. 92.15.2.144 (talk) 00:57, 12 March 2011 (UTC)
- If they're truly random, then they will show clustering. Mikenorton (talk) 12:26, 12 March 2011 (UTC)
- This claim was made on CNN by a geology Prof., and he was referring to the really big quakes of magnitude 8.7 or larger. Such quakes are quite rare, they happen on average every few decades. However, there is a strong clustering that contradicts them being random. So, around 1960 there were 3 such huge quakes witin a period of a few years and we now have two or 3 of them (depending on whether you count the predicted magnitude 8.7 2005 Sumatra earthquake ). Count Iblis (talk) 15:24, 12 March 2011 (UTC)
- I heard some reports stating that the 2011 Christchurch earthquake triggered more shocks all across the Pacific Ring of Fire to places as far as Alaska, but it's likely impossible to ascertain the connection. Propagation of quakes along the fault line occurred following the 2010 Chile earthquake. However, the 2011 Yunnan earthquake was likely not tied to the Japan shock, even if it is connected to the aftershock sequence from the 2008 Sichuan earthquake. ~AH1(TCU) 02:17, 13 March 2011 (UTC)
Changing # of chromosomes in evolution
How do new species arrive that have a different number of chromosomes from their antecedents? I can see how the number could go down, actually, in theory, at least, but increasing-- where'd the DNA come from? Unless one of the already existent chromosomes split in the new species (seems like extremely high odds against that happening while not causing serious problems, let alone fitness) And yet many species of life have differing amounts of chromosomes, so it must happen. 20.137.18.50 (talk) 16:18, 11 March 2011 (UTC)
- Polyploid plants can be formed from two monoploid parents, so the number of chromosomes can double in a single generation. Often, rather than suffering decreased fitness, many polyploid plants are quite hardy and robust, and specifically have characteristics desirable for agriculture. Many of our primary crop plants today are polyploid. See this section of our page for examples. There are other ways chromosome number can change, but this is a good place to start. SemanticMantis (talk) 16:32, 11 March 2011 (UTC)
- You answered your own question. "It must happen". Which means that your intuition about the odds of that happening is simply incorrect. Dauto (talk) 16:42, 11 March 2011 (UTC)
- That doesn't answer the how though, Dauto. 90.195.179.167 (talk) 16:44, 11 March 2011 (UTC)
- Thanks, SemanticMantis, paleopolyploidy covers exactly what I was wondering about. Dauto, I didn't mean to doubt that it happens, I only meant to express my desire to understand how it happens, noting my perspective at the time given how easily bad things happen when genes get messed with. 20.137.18.50 (talk) 16:48, 11 March 2011 (UTC)
- What makes you think that the splitting would have to mess up any genes? The splitting could happen between genes. There is a lot of non-coding DNA between genes in most Eukaryotes. Dauto (talk) 16:55, 11 March 2011 (UTC)
- I don't have any specialized knowledge on the subject, and am glad to have any wrongheaded assumption I have made replaced by fact. 20.137.18.50 (talk) 17:10, 11 March 2011 (UTC)
- One thing to bear in mind is that increasing the chromosome number by splitting one, or decreasing it by merging two, chromosomes (see Chromosome 2 (human) for an interesting example of the latter) does not involve creating or destroying any DNA, because differently-numbered chromosomes are not all the same size - indeed, they are conventionally numbered according to size order. When such merges and splits occur, individuals with them may initially still be able to reproduce with "unmodified" individuals because the two sets can still line up well enough: over time, the modification may multiply until modified individuals are regularly mating, and then the modification may, through some advantage, take over through Natural Selection.
- Also, genes can migrate from one chromosome to another over generations, and smaller chromosomes may have shrunk by some of their genes having moved to larger ones: in time a chromosome could eventually dwindle away to nothing by this mechanism, again reducing the chromosome number. Some mitochondrial genes have over the aeons transferred from the mitocondria's single circular chromosome (I oversimplify) to nuclear DNA chromosomes, which is one reason why mitochondria can no longer operate as independent living organisms, and it has been suggested that the human Y chromosome (already our tiniest) will eventually disappear in this way (several human male-sex-determining genes are already on other chromosomes).
- As others above have mentioned, sometimes the Chromosome complement can double "in one go" through polyploidy (I believe it's happened about 4 times in our own deep ancestry). When this happens the organism has a complete operating genome plus a "spare", and genes in the latter are then available to evolve new genes without losing the functions of the "originals". This could also happen if a single chromosome pair was doubled, or increased from 2 to 3, but sometimes such increases can cause deleterious effects, as in Trisomy 21.
- Just as you say, such occurrances are rare, and non-deleterious ones rarer, but the deleterious ones are eliminated by Natural Selection, and there is so much time available over the millions of years over which evolution operates that the rare advantageous ones have time to accumulate. {The poster formerly known as 87.81.230.195} 90.201.110.135 (talk) 21:30, 11 March 2011 (UTC)
- Is there an example of a species with a variable number of chromosomes, where at least two of the variations could be described as "healthy" ? StuRat (talk) 23:44, 11 March 2011 (UTC)
- Yes, Homo sapiens! This link refers to an individual from China with 44 chromosomes (22 pairs) as opposed to the usual 46, and I am sure I have recently read of a family in Scandinavia with the same count (though not necessarily due to the exact same variation), that I am momentarily unable to find references for. The latter family displays somewhat reduced but by no means destroyed interfertility with 46-chromosome individuals, because, as in my description of the Chromosome 2 merge above, the 2 unmerged chromosomes from a "normal" partner can still align well enough with their corresponding end-linked "double" chromosome to achieve homologous pairing. The individuals with 44 chromosomes are entirely healthy; they merely have the same genes packaged in a slightly different way. I suspect that this sort of variation is more common than hitherto realised (because who has been looking?), and I believe some other species more commonly show variable counts, but can't bring any to mind just now because it's past 5 in the morning! {The poster formerly known as 87.81.230.195} 90.201.110.135 (talk) 05:24, 12 March 2011 (UTC)
- Interesting, thanks. StuRat (talk) 05:59, 12 March 2011 (UTC)
- That is a great link. Note that the man was actually the offspring of two people who both carried the translocation! So there's already some population out there (though probably very small) carrying this new chromosomal configuration.
- What is interesting to consider is that if there are even just a few people like this man, it quickly reaches the point where outsiders are the ones with the "funny" chromosome pattern, in the sense that they'll be less capable of producing offspring with members of the group than they are with one another. Should it happen that group members are sitting on some good genes for some situation, this means that their group might spread out and start to dominate an area, and in this way start to look like a "new species" (though further barriers obviously would need to evolve) Wnt (talk) 07:16, 12 March 2011 (UTC)
- There's also Przewalski's Horse which has 66 chromosomes and other horses have 64. It's debated whether it's a species or a subscpecies, partly because it can produce fertile offspring with other horse (sub)species. There's a discussion at the talk page that you might find interesting. I also recall reading about some small animal in the Middle East which had varying number of chromosomes in the same species. It might have been some kind of mongoose or rodent. I'll se what I can find.Sjö (talk) 08:09, 12 March 2011 (UTC)
- Not exactly what I was looking for but http://www.talkorigins.org/indexcc/CB/CB141.html mentions the common house mouse and the plant genus Clarkia.Sjö (talk) 08:17, 12 March 2011 (UTC)
- There was a similar discussion here two weeks ago, see (refdesk 2011-Feb-28) Chromosome numbers and speciation. Populations with interbreeding members having different numbers of chromosomes display chromosomal polymorphism. This is also discussed in Karyotype#Chromosomal_polymorphism. --NorwegianBlue talk 20:37, 12 March 2011 (UTC)
- See also viral fossil and insertional mutagenesis. ~AH1(TCU) 02:09, 13 March 2011 (UTC)
- There's also Przewalski's Horse which has 66 chromosomes and other horses have 64. It's debated whether it's a species or a subscpecies, partly because it can produce fertile offspring with other horse (sub)species. There's a discussion at the talk page that you might find interesting. I also recall reading about some small animal in the Middle East which had varying number of chromosomes in the same species. It might have been some kind of mongoose or rodent. I'll se what I can find.Sjö (talk) 08:09, 12 March 2011 (UTC)
After looking at the link provided by the very knowledgeable anonymous editor, http://www.thetech.org/genetics/news.php?id=124, I am wondering why the 6×6 table is not symmetric. The last column, third last row, should be the same as the last row, third last column, shouldn't it? The contents do indeed look the same to me, but one is crossed out, the other isn't. Why would that be? — Sebastian 19:13, 13 March 2011 (UTC) Never mind; that was a mistake that will be corrected. — Sebastian 03:21, 15 March 2011 (UTC)
Strange breakers on Japanese Tsunami
There is a strange looking video of the tsunami coming onshore on CNN [4] (I can't figure out how to link to the video directly, you need to click on "Witness deals with quake terror" in the video gallery"). The wavefront is showing breakers only over a narrow and very well defined front. It does not seem to be due to the wave passing over an undersea obstruction as the breakers are long lasting and continue to show all the way in. What is the explanation for this? SpinningSpark 16:47, 11 March 2011 (UTC)
- I also saw it. My impression is that the ground surface along that "strip" was different from the ground on either side of it - turbulent flow over a rougher surface flanked by less turbulence where the substrate is smoother. It also looked like the depth of the water in that area was only a metre or two so even relatively minor "texture" differences could cause a substantially different amount of visible turbulence on the water surface. Roger (talk) 19:41, 11 March 2011 (UTC)
- It may be due to a sand bar. The shallower the water, the closer the waves and the more likely they are to break. In WW2, the spacing of the waves measured from aerial photographs was used to estimate the depth and slope of the D-day beaches using a mathematical formula. I have been unable to find an article about this formula: the nearest I could get is this Waves and shallow water but there may be a better article hiding somewhere. 92.15.24.90 (talk) 20:15, 11 March 2011 (UTC)
- (edit conflict, replying to Roger) Yes, that's the obvious conclusion but I remain unconvinced for a couple of reasons. Firstly, the wake behind the breakers is ruler straight and constant width as if it was following a road, yet the effect continues up the beach where there is no sign of any lateral change in colour or texture of the substrate - I am sure that a change from sand to shingle, for instance, would be visible in the picture and such natural features are rarely so unnaturally straight. Secondly, I believe tubulence and/or friction caused by the substrate would cause a reduction in the wave velocity, but this is not borne out by the perfect straightness of the wavefront through the turbulent and non-turbulent sections. SpinningSpark 20:21, 11 March 2011 (UTC)
- The type of wave may be a spilling breaker which explains why it keeps frothing for a long time. The second issue is why the white breaking part of the wave seems to keep a constant width for so long. This might be an illusion. The wave may be breaking as the instability in the crest and the resulting turbulence is spreading sideways at some fixed speed. Observed at a beach, such a domino-effect may seem rapid, but the same velocity observed from a helicopter seems small. Especially as we visually measure it not in metres per second but in percentages of the already wide breaking crest. It must also be taken into account that waves with a longer wavelength travels faster, so again our beach-aquired intuition about the forward speed of a wave versus the sideways spread of a collapse may not be correct. EverGreg (talk) 22:24, 11 March 2011 (UTC)
- Looking at these videos, what seems striking is that the waves are actually able to move water upward in a given spot for a long period of time. In other words, there's a vast long hump of water with a strong horizontal momentum, so that it can wash right up over an obstacle. So I think we're seeing water that not merely is passing over a submerged obstacle, but which is actually striking an object that projects above the point where its surface was. Even so, it just vaults up over it and moves on. Wnt (talk) 07:10, 12 March 2011 (UTC)
- The effect of the water piling up is due to the wave entering shallow water and is a "normal" effect of tsunamis. Unlike normal waves which are only on the surface, tsunami waves occupy the full depth of water. The foot of the wave is slowed by the substrate and the rest of the water piles up on top of it. SpinningSpark 09:07, 12 March 2011 (UTC)
- Anyway, my gut feeling from watching the video is that there was an obstacle over a long region, which had slightly different elevations (relative to the tsunami, at least) in different areas; and that only where it extended above some critical threshold did it cause the flow to become turbulent. But that's not an expert opinion. Wnt (talk) 16:34, 12 March 2011 (UTC)
- That's what it looked like to me, too. WikiDao ☯ 17:43, 12 March 2011 (UTC)
- 30 seconds into the video you can see the frothing edge being at an angle with the rest of the wavefront. This would be a sign of refraction caused by different parts of the wave being at different depths. So elevations probably factored into this. EverGreg (talk) 19:03, 12 March 2011 (UTC)
- In a way, you can say that elevation not just factors in this, but is the main deciding factor. What complicates the matter is that it's not so much the elevation at the place you're observing, but the whole topography of the ocean floor (at least up to a certain depth) over which the wave has passed before. Shallower waters slow down waves, which bundles them much as an optical (convex) lens does. (In the eighties, there have actually been successful experiments in Norway, where they constructed submerged lenses to focus oceanic water waves into one location, where they could be harnessed. Not sure what became of that.) So the streak you're seeing is basically the same as a light beam. The same happens on a global scale, as you can see in this NOAAH height map (the same we linked to from our article). — Sebastian 19:37, 13 March 2011 (UTC)
- Anyway, my gut feeling from watching the video is that there was an obstacle over a long region, which had slightly different elevations (relative to the tsunami, at least) in different areas; and that only where it extended above some critical threshold did it cause the flow to become turbulent. But that's not an expert opinion. Wnt (talk) 16:34, 12 March 2011 (UTC)
- The effect of the water piling up is due to the wave entering shallow water and is a "normal" effect of tsunamis. Unlike normal waves which are only on the surface, tsunami waves occupy the full depth of water. The foot of the wave is slowed by the substrate and the rest of the water piles up on top of it. SpinningSpark 09:07, 12 March 2011 (UTC)
- Looking at these videos, what seems striking is that the waves are actually able to move water upward in a given spot for a long period of time. In other words, there's a vast long hump of water with a strong horizontal momentum, so that it can wash right up over an obstacle. So I think we're seeing water that not merely is passing over a submerged obstacle, but which is actually striking an object that projects above the point where its surface was. Even so, it just vaults up over it and moves on. Wnt (talk) 07:10, 12 March 2011 (UTC)
Air circulation
What is the name for a large body of rotating air, something like an ocean gyre but in the air? --T H F S W (T · C · E) 19:38, 11 March 2011 (UTC)
- A cyclone or anticyclone, depending on which way it is rotating. Looie496 (talk) 19:45, 11 March 2011 (UTC)
- Note that the direction of rotation is different either side of the equator. Cyclones rotate counter clockwise in the Northern Hemisphere and clockwise in the Southern Hemisphere and anticyclones do the opposite. The distinction that is not location dependent is that the pressure in a cyclone decreases towards the middle and in an anticyclone it increases towards the middle. Cyclones are also called low pressure cells and anticyclones are high pressure cells. Roger (talk) 19:55, 11 March 2011 (UTC)
- Note that an ocean gyre is a more or less "permanent" pattern of circulation, though, lasting many thousands of years, at least, while a cyclone or anticyclone only lasts a small portion of a year. StuRat (talk) 23:25, 11 March 2011 (UTC)
- The gyres are propelled by the winds. Specifically, they are propeled by the westerlies and the trade winds. The presence of the oceans forces the ocean motion into the gyre patterns. Dauto (talk) 00:56, 12 March 2011 (UTC)
- See Hadley cell and Rossby wave. Roger (talk) 19:23, 12 March 2011 (UTC)
- From a meteorological point of view, jet streams are probably a closer equivalent of gyres than synoptic atmopsheric systems. They're more "permanent", so to speak, and encompass a much larger area than lows and highs. They don't rotate, per se, but they do circulate. Juliancolton (talk) 23:25, 12 March 2011 (UTC)
- "Quasi-stationary" systems in the atmosphere include the Azores High, Siberian High (winter), Icelandic Low (not year-round) and others. ~AH1(TCU) 02:07, 13 March 2011 (UTC)
This should be a synch...
There was recently a case where a baby was delivered at the side of the road, by the (non-medical) father, with paramedics on the phone. One thing the paramedics advised baffled me. After the baby was delivered, they said it was important to synch off the (uncut) umbilical cord, to prevent continuing blood flow between the mother and baby. Since no other string was available, the paramedics advised him to use the shoelaces from the shoes he was currently wearing. I can't imagine a less sterile item than those laces, and cringed when I heard that advise. So, my Q is, why is it so important to stop the blood flow immediately, rather than just wait for the ambulance to arrive ? StuRat (talk) 20:26, 11 March 2011 (UTC)
- Just by the way, I think you mean cinch. --Trovatore (talk) 20:28, 11 March 2011 (UTC)
- Thanks, I wasn't sure how to spell that, as it's not a word I normally use, at least in writing. StuRat (talk) 23:16, 11 March 2011 (UTC)
- Why does the shoelace or whatever is used to tie the umbilical have to be sterile? The cord and placenta will be discarded soon anyway and the cord will be cut and properly clamped with a clean clamp when the ambulance arrives. The cord must be shut off asap because if it isn't nothing would prevent the baby's blood draining out through the placenta after it detatches from the uterus, which can happen very soon after the baby is born. Not shutting off the umbilical cord will result in a dead baby within minutes wheras a dirty shoelace might have a slight chance of making the baby ill hours or even days later - the choice is a no-brainer. Sterility is in any case massively overrated as a requirement for people who have normal functioning immune systems. We survived for millions of years without even having the concept of germs or sterility. Roger (talk) 20:43, 11 March 2011 (UTC)
- We also survived for millions of years without the thumbs necisary to tie a knot or build a clamp, so shutting off the cord must not be manditory (although it might lower the death rate of baby and mother). —Preceding unsigned comment added by 205.193.96.10 (talk) 21:23, 11 March 2011 (UTC)
- Animals bite off the umbilical cord, probably not a method that would be prefered by human fathers. Wouldn`t squeezing the cord shut and waiting for the ambulance work too, though, without creating risk for infection? ~~Xil (talk) 22:18, 11 March 2011 (UTC)
- I'm not sure how biting the cord off would help prevent bleeding - it would increase it, surely? You'll probably need your hands for other things. Taking care of the mother and baby, delivering the placenta, etc.. Using a shoelace is the standard advice. --Tango (talk) 22:28, 11 March 2011 (UTC)
- Yes, I would think biting off the cord would both cause bleeding and infection, due to all the germs in saliva, and the presumably undeveloped immune system in the offspring. What prevents these things from happening ? StuRat (talk) 23:19, 11 March 2011 (UTC)
- I`m just saying that the argument about no thumbs might be invalid, I am not sure how the said animals don`t bleed to death. I believe in olden days they would cut the cord and tie a knot in it, not sure, if it is right, though, couldn`t find any quick information ~~Xil (talk) 00:38, 12 March 2011 (UTC)
- Yes, I would think biting off the cord would both cause bleeding and infection, due to all the germs in saliva, and the presumably undeveloped immune system in the offspring. What prevents these things from happening ? StuRat (talk) 23:19, 11 March 2011 (UTC)
- As long as the unbilical cord is intact and not bleeding, then there is no route for infection to get it so you don't need to worry about sterility. Anyway, worst case scenario: you have to give the baby a shot of antibiotics. Not a big deal. We do (of course) have an article: Umbilical cord#Clamping and cutting. It doesn't discuss infection, but does discuss the pros and cons of clamping quickly, slowing and not at all (there doesn't seem to be a lot of difference). --Tango (talk) 22:28, 11 March 2011 (UTC)
Starvation and blindness
I have read that starvation can lead to temporary vision loss (and when the patient is returned to his or her regulat diet, the vision problems go away), is this true, and how?—Preceding unsigned comment added by 142.1.253.163 (talk) 21:08, 11 March 2011
- If you have a vitamin A deficiency, you can go blind. Clarityfiend (talk) 01:29, 12 March 2011 (UTC)
- Yes, people who willingly under go starvaion can and do experiance blindness. Hunger_strike#Animal_rights--Aspro (talk) 23:33, 12 March 2011 (UTC)
how does a vacant space,hole( in electronis) have a mass?
in electronics mass of hole is considered . Hole is a vacant space created when electron is migrated to conduction band from the valance band. how can this free space have a mass? —Preceding unsigned comment added by 117.197.192.72 (talk) 01:24, 12 March 2011 (UTC)
- It is not a real mass. It is an effective mass which basically mean that the hole moves around displaying a behavior which can be interpreted as if it was a particle with mass. Think about it. The hole moves about by having electrons jump from neighbor regions and filling the hole and living a vacancy behind. This motion is not instantaneous and respond to external forces (such as an external electric field) in such a way that we can interpret the whole thing as if a particle with positive charge and some non-zero mass was there. That's the hole. Dauto (talk) 02:19, 12 March 2011 (UTC)
Beyaz and Natazia
Where is the page for Beyaz so short at the moment? At the same time where is the page on Natazia as well? Basically, I would like to learn more about these birth control options. — Preceding unsigned comment added by Mybodymyself (talk • contribs) 03:57, 12 March 2011 (UTC)
- WP does not have information on everything - yet. The article on Beyaz is short because no-one, including you, has added more information to it. The article on Natazia does not exist for very similar reasons. If you put 'Natazia' into google you will receive about 84,000 hits, some of these contain excellent information about Natazia. Richard Avery (talk) 08:23, 12 March 2011 (UTC)
Why is blood typing routine in Mexico, but not in the United States?
Question: Why is blood typing routine in Mexico, but not in the United States (outside of the contexts of blood-donation or surgery)?
Context: I'm in my mid 30s, was raised in the United States, now living in Mexico. I've never donated blood (shame on me!) or had surgery (knock on wood). Therefore I've never had any occasion to have ABO or Rh(D) blood-typing done. Neither I nor my parents know my blood type. (Father is A, mother is B, so I gather I could be anything, depending on their relative zygosity; no, I'm not asking you to determine paternity!).
It seems I'm not that unusual for someone from the USA; according to this website, 60% of Americans don't know (warning: this site also advocates the blood-type personality/diet quackery). More anecdotal confirmation: 1402 people on a US website professing blood-type ignorance.
Arriving in Mexico City, it appears that everybody here knows their blood type. It is requested on the driver license application, as well a myriad other government documents; it appears on taxi-driver medallions posted in every (legal) taxicab's rear passenger-side window. If the subject comes up, without fail every Chilango is incredulous that I don't know what to them is as basic a piece of personal information as one's birthdate or second (maternal) family name (whoops, I fail there, too!).
One Mexican friend has gone so far as to call my mother negligent and my doctor an idiot. "You need to know in case you're in an accident and need a blood transfusion!", she says. I reply, "My US doctor told me, 'You only get tested at the moment it becomes necessary, in the ER or blood donation van'." "But there's no time in an emergency! You could die while they're testing you!" Cue hysterical screaming.
More anecdotes: One of the poorest municipal governments in Mexico offers free blood-typing analysis
A Mexico State legislator proclaims obligatory blood type testing to be an unnecessary and irrelevant requisite for registering schoolchildren, implying that the practice is currently standard.
So what accounts for this difference? I accept my facts are all very anecdotal (perhaps there's a MEDLINE article somewhere beyond my search-fu), but what, if anything, could this say about respective medical practices/bureaucratic zeal of each society? Or other countries? Sorry for being long-winded!
--189.227.64.126 (talk) 04:03, 12 March 2011 (UTC) Gringo seudoanónimo
- Knowing your blood type is useful for you and, really, only you. If you don't want to take the time to get a test (free from many places), then it is all on you. Once you decide to try and have children, then your blood type is important for the child also because there are possible complications based on the compatibility of the mother's and father's blood type. Chances are the mother's doctor will have both the mother and father checked. When my wife was first pregnant, her doctor had by blood type checked even though I already knew what it was - just to be sure. Beyond that, anything that may happen in which your blood type is important to others will include a blood type check. -- kainaw™ 04:20, 12 March 2011 (UTC)
- I should have answered about the need for blood transfusion. It is safe to use O- blood while your blood type is checked (which takes minutes in an emergency, but 20-30 minutes under normal circumstances). By the time you finish some O- blood, your blood type will be known and you will likely be given your specific blood type. If, for some reason, there is no O- blood, O+ is usually safe to start with (with very rare complications). From what I've seen, O+ is usually in higher stock levels than O-, but I don't think that is because there is simply more O+ blood donated. I think it is because O- is used more. But, I never checked donation/usage statistics on that. I spend my time at the Red Cross doing experiments on how donating blood affects hypertension, diabetes, and hypercholesterolemia. I've only been surprised once: donating blood increases blood pressure for a few hours. Then, it is lowered for a couple days. I assumed it would be lowered for a few hours and then return to normal. But, it is late and I'm drifting quickly off topic. -- kainaw™ 04:27, 12 March 2011 (UTC)
- In an emergency, Rh-negative type O blood can be transfused about as safely as type-matched blood that has not been cross-matched. Thus, it's arguably more efficient to maintain a stock of type O blood than it is to depend on typing everyone and assuming that the blood type document they carry is accurate (many people carry identification that belongs to someone else, for a variety of reasons, and might not be in condition to explain during an emergency). As our Rh article I just linked points out, Rh negativity is much less common than Rh positivity, hence O- donors are significantly less common than O+ donors. -- Scray (talk) 04:42, 12 March 2011 (UTC)
- In addition to the above, there is also a risk of mistakes, either a mistake in transferring data from the test to the ID-card or whatever, or because the ID-card belongs to a different person. The consequences of giving a transfusion with the wrong blood type can be disastrous, but there's usually no serious consequence if you take the time to check the blood type and give O-blood or other fluids in the meantime. Also, blood typing everybody will take resources that might be better used elsewhere. Source: Opinion from the Swedish Riksdag's comittee on social services (Swedish).Sjö (talk) 10:53, 12 March 2011 (UTC)
- I heard from someone at the ASBBC that the US military routinely retypes soldiers before sending them overseas because so many of the dogtags they get in basic end up being wrong. Other than the possibility for errors, you also have to find the card/ask the person/etc... in order to find the blood type, and honestly that might take longer than just a stat ABO type. I'd guess that the difference between the US and Mexico is probably that the US has a much better blood bank infrastructure and at least a couple of units of type O blood are routinely available at any hospital (most hospitals I've seen have two or four units reserved precisely for this purpose). Either that or living in Mexico is more dangerous and you're far more likely to need a transfusion... SDY (talk) 12:46, 12 March 2011 (UTC)
Thanks for your responses. Paraphrasing somewhat polemically:
- Kainaw: Blood typing is useful to individuals, but not to a society at-large. Implication: the US has made a rational choice, and Mexico has not, for some unexplained reason.
- Scray: A blood bank infrastructure which maintains a stock of
O+O- blood is arguably more efficient. Implication: The US has this stock, Mexico does not and therefore inefficiently relies on individuals to carry accurate records. (BTW, most Mexicans are type O) - Sjö: Resources are more efficiently spent testing at the moment of need rather than beforehand. Implication: Mexico wastes its resources. Why?
- SDY: The US has a better blood bank infrastructure than Mexico. Implication: Consequently, the individual burden to track blood type is eliminated. I'll ignore the joke about Mexico being more dangerous to live in... though its 2000 traffic accident death rate was 168% greater than the US (and 714% greater than Sweden's!)
The unspoken judgment in all of your responses is that Mexico has backward medical practices compared to the US, ie. economic factors rather than cultural explain the difference. Let me tell you that this view is not generally well received here in Mexico, and would likely be termed mamón, or "stuck up." The woman I mentioned above countered that Mexico, being a country with strong indigenous roots, has a longstanding pro-active, self-medicating tradition, where one must literally bring one's own medical records to each doctor visit. The US, by contrast, being an immigrant society, has discarded whatever traditional health participatory patterns and instead defers to its medical system to know what's best. Which is better might depend on one's values (or you could measure by life-expectancy, incidence of diabetes, etc.)
So, returning to the question; if it's just a question of economic development, aren't there counter-examples of wealthy/highly-developed societies where every person is expected to know one's blood type? Japan comes to mind, (I only know about it from reading about the popular belief in blood-to-personality typology, which Mexico incidentally does not share). --189.227.64.126 (talk) 04:33, 13 March 2011 (UTC) Gringo seudoanónimo
- Every nation/culture has its superstitions. I don't think anyone who replied in this thread judged Mexico as less rational "on average" than, say, the U.S., just as less rational on this one particular point. If you want to talk about ways in which the U.S. wastes its resources, well, don't get me started. -- BenRG (talk) 08:57, 13 March 2011 (UTC)
- IP189.227...'s summary of my comment is inaccurate though I do agree with their self-characterization of that summary as "somewhat polemical". I did not suggest a stock of "O+ blood" (I specifically suggested O-). More importantly, each government must make their own decisions regarding how best to manage emergency supplies. I simply stated that it is "arguably" more efficient to transfuse O- blood when transfusion cannot wait, and type & crossmatch in the meantime. -- Scray (talk) 13:49, 13 March 2011 (UTC)
- Corrected my arguable argumentative summary. Thank you, Scray. 189.227.64.126 (talk) 14:54, 13 March 2011 (UTC)
- I agree that it's somewhat polemical, though maybe not wholly inaccurate. GSWs and MVAs aside, I'm actually looking at medical records in the Dominican Republic right now, and "self-medicating tradition" has left me a little... nonplussed. People taking cipro for toothaches makes me want to modify the appearance of the nearest wall with my forehead. SDY (talk) 15:45, 13 March 2011 (UTC)
- There is plenty of self-medicating tradition in the United States also. I work in hypertension, diabetes, and hypercholesterolemia research. It is amazing how people who freely blow thousands of dollars every year on beer, cigarettes, and lottery tickets will penny-pinch over a $10/month medication bill. Further, there are cultural superstitions that border on insanity (in my opinion, they step clearly over the line). For example, there is a black culture superstition that hypertension is not real. It doesn't exist. It is a white supremacist trick to get black men to take hypertension medication that actually makes them sterile. So, black men (who are known to be at the highest risk for hypertension) tend to avoid hypertension medication out of fear that it will make them sterile. You cannot reason with self-medicating traditions because you cannot reason a person out of an opinion that he or she reached without reason. You just have to hope they don't pass it on their children. -- kainaw™ 18:17, 13 March 2011 (UTC)
- I was with you, more or less, until you said "without reason". Are you unaware of reasons, based on documented history, why black men might believe that white Americans want them sterile? For any that would accuse of digression, I am speaking scientifically here - this is relevant to self-medicating traditions, etc etc... -- Scray (talk) 04:12, 14 March 2011 (UTC)
- There is plenty of self-medicating tradition in the United States also. I work in hypertension, diabetes, and hypercholesterolemia research. It is amazing how people who freely blow thousands of dollars every year on beer, cigarettes, and lottery tickets will penny-pinch over a $10/month medication bill. Further, there are cultural superstitions that border on insanity (in my opinion, they step clearly over the line). For example, there is a black culture superstition that hypertension is not real. It doesn't exist. It is a white supremacist trick to get black men to take hypertension medication that actually makes them sterile. So, black men (who are known to be at the highest risk for hypertension) tend to avoid hypertension medication out of fear that it will make them sterile. You cannot reason with self-medicating traditions because you cannot reason a person out of an opinion that he or she reached without reason. You just have to hope they don't pass it on their children. -- kainaw™ 18:17, 13 March 2011 (UTC)
Tokyo's earthquake
2011 Sendai earthquake and tsunami: Most news sources claim that this earthquake is the biggest one ever recorded in Japan's modern history. However, Tokyo only experienced a seismic scale 5+ quake this time (thanks to the distance). This is big but not as big as the city-devastating quake the scientists warned about. So far most damages were caused by tsunami rather than the quake. Much of the city survived the quakes.
- http://www.jma.go.jp/jp/quake/20110311145349391-111446.html
- http://www.jma.go.jp/jp/quake/20110311150154391-111446.html
- 東京都 震度5強 東京千代田区大手町 東京江東区東陽 ...
- Tokyo Metropolitan area, seismic scale 5+: Chiyoda Ward, Koto Ward, ...
Does it mean that this earthquake is still not the big one feared by the scientists? -- Toytoy (talk) 04:20, 12 March 2011 (UTC)
The big earthquake that was to destroy Tokyo aka the next Kanto Quake was due in 1995. 139.130.57.34 (talk) 04:36, 12 March 2011 (UTC)
- I think this was the big one feared by scientists. It may not have been directly on-target, but an 8.9 earthquake sure does release a lot of energy. I think it will be a while before the next big one. --T H F S W (T · C · E) 05:19, 12 March 2011 (UTC)
I noticed that very few buildings in Tokyo collapsed because of the earthquake. Much of the subway system remains undamaged. The tsunami caused much more damage than earthquake. Japan's buildings survived the seismic scale 5+ quake. Since there are many more faults even closer to Tokyo may cause earthquakes, I doubt that the next big one is still waiting to happen. However, this disaster reminds us the seriousness of tsunamis. They are probably even worse than earthquakes.
This earthquake is MUCH larger than the Great Hanshin earthquake of 1995. However, since the Hanshin earthquake's epicenter was almost under the cities, many highly-developed metropolitan areas experienced seismic scale 6 to 7 rocking and shaking. Buildings collapsed. People were killed or rendered homeless. This time Tokyo's citizens suffer much less. On the other hand, people living in some coastal areas were wiped out completely because of the killing tsunami. -- Toytoy (talk) 08:11, 12 March 2011 (UTC)
- The rupture area of the Sendai earthquake does not overlap with the estimated rupture area for the 1923 Great Kantō earthquake, so it's unlikely to have changed the risk for a re-run of that event, it might even trigger it, like the 2005 Sumatra earthquake, which followed close on heels of the 2004 Indian Ocean earthquake, rupturing an adjacent area of the Sunda megathrust. Mikenorton (talk) 12:57, 12 March 2011 (UTC)
- The Sendai earthquake may have been close to the maximum strength for a Japanese quake but was certainly not the worst-case scenario. Such a quake would be a magnitude 9+ tremblor occurring near the Tokyo Bay region. Seismologists have not ruled out the possibility of M7+ aftershocks occurring very close to Tokyo Metropolitan Area. ~AH1(TCU) 02:01, 13 March 2011 (UTC)
INDIA A SUPER POWER
I AM A STUDENT FROM GOA,INDIA. I AM A SCIENCE STUDENT OF 2011 BATCH. I THINK INDIA HAS A MULTIDIMENSIONAL MILITARY FORCE TO SECURE ITS TERRITORY AND ENOUGH MILITARY STRENGTH TO COMBAT ANY A THREAT. — Preceding unsigned comment added by K55WI4DFG (talk • contribs) 09:20, 12 March 2011 (UTC)
How jolly nice for you. Now if you can just clear up some of those shameful slums, you'll be all set to join the 20th Century. (P.S. Printing in full caps is regarded as a style best suited for the uneducated and uncouth. Then again, perhaps you better keep on using it.) Myles325a (talk) 09:53, 12 March 2011 (UTC)
- How is this a science question? SDY (talk) 12:47, 12 March 2011 (UTC)
- How is this a question? --41.132.13.74 (talk) 18:08, 12 March 2011 (UTC)
- Nice one Myles325a, What a prick!! but then you are in Australia! Caesar's Daddy (talk) 14:21, 12 March 2011 (UTC)
- I think India needs to test more powerful thermonuclear weapons before such a claim can be made. Count Iblis (talk) 15:14, 12 March 2011 (UTC)
- That seems like a rather silly and arbitrary definition. 200 kilotons not good enough for you? Is it going to make you treat them differently than if they had 1 Mt? From a strategic standpoint, what matters less is the size of the boom (even 1kt is enough to be "unacceptable" if it goes off over a city), but where you can put it (if you can't deliver the thing, then it isn't much of a threat). --Mr.98 (talk) 16:21, 12 March 2011 (UTC)
- My understanding is that many definitions of true "superpowers" are the ability to project force globally. Both the USA and USSR could have, essentially, put "men on the ground" on any continent. India cannot reasonably do this to my understanding. They do note even have secondary strike capability outside of the subcontinent. Securing your own territory just makes you a power — not a "super"-power. --Mr.98 (talk) 16:21, 12 March 2011 (UTC)
- We have an article that discusses the possibility of India becoming a superpower. It doesn't seem particularly likely in the immediate future. Matt Deres (talk) 20:01, 12 March 2011 (UTC)
- See veto power and regional power. ~AH1(TCU) 01:55, 13 March 2011 (UTC)
F.A.G.E?
I HAD SEEN MY DOCTOR'S QUALIFICATION. IT WAS WRITTEN F.A.G.E. I HAD SEARCHED IN THE WEB SEARCH ENGINES AND COULD NOT GET THE ANSWER. COULD SOMEONE HELP ME OUT WHAT DOES F.A.G.E. STAND FORRaavi4321 (talk) 11:12, 12 March 2011 (UTC)
- Possibly Fellow of Academy of General Education as offered by Manipal University. I can't identify if this is an actual qualification or a membership though. Nanonic (talk) 14:27, 12 March 2011 (UTC)
- Fake Acronym to Gain Employment? Clarityfiend (talk) 20:26, 12 March 2011 (UTC)
Potentiometric Titration
Hello. Will I get a normal titration curve if I titrate, with a potentiometer, KIO3 in acidic solution against ascorbic acid mixed with starch indicator and KI? Thanks in advance. --Mayfare (talk) 17:26, 12 March 2011 (UTC)
- See the Wikipedia articles Titration and Titration curve. Since a titration is a method of quantitative chemical analysis you will have to do the experiment to see the result. Cuddlyable3 (talk) 20:53, 13 March 2011 (UTC)
How did mid-twentieth-century fixists explain the dovetailing opposite coasts of the Atlantic Ocean?
How did recent "fixists" (opponents of the theory of continental drift, including Harold Jeffreys and others) explain the dove-tailing outlines of South America's east coast and Africa's west coast? 82.31.133.165 (talk) 20:32, 12 March 2011 (UTC)
- Just coincidence, they could argue. After all, they aren't an exact fit, due to erosion and changing water levels. Then they would point to all the adjacent continents that don't seem to match very well, such as the lack of an Italy-shaped indentation in North Africa. StuRat (talk) 21:36, 12 March 2011 (UTC)
- Unless you happen to have been a mid-20th century "fixist", your opinion about it doesn't matter to anyone other than you. Matt Deres (talk) 04:57, 13 March 2011 (UTC)
- I don't agree. Studying the reaction of scientists who deny a new science has direct application today, such as those (few) scientist who seem to deny the existence of global warming (usually those with a big grant from somebody who wants them to say that). StuRat (talk) 08:54, 13 March 2011 (UTC)
- What has that got to do with anything? The comment was directed at you, not the questioner. The OP wants to know what certain people thought/said/wrote about a particular topic. They're not interested in what StuRat would have said if he'd been there. Matt Deres (talk) 14:00, 13 March 2011 (UTC)
- We have a history section in the continental drift article, and an entire article Timeline of the development of tectonophysics. From that article, I found this history book online, Scientific controversies... (by Arthur Caplan, 1987), with an entire chapter on the continental drift debate, and an entire sub-chapter entitled "The fixists' response to Wegener's drift theory" which should give you a pretty solid footing. You could then pursue the original papers published by the involved parties. Caplan lists several specific opponents of the modern theory of plate tectonics and continental drift. Nimur (talk) 22:48, 12 March 2011 (UTC)
Limestone flakes changing color
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/bf/Limestone_flakes_at_the_Indiana_Memorial_Union.jpg/250px-Limestone_flakes_at_the_Indiana_Memorial_Union.jpg)
I just noticed a limestone block that has pieces coming off in lighter colors. How/why do the pieces change color? They're definitely part of the original block: the contours of the pieces conform precisely to the contours of the section of the block on which they're sitting, and you can see that the piece in the top left gradually changes; it's only partly detached from the block. Moreover, how do the pieces come off? They've obviously not been moved or broken off by human action; is it simply the result of winter weather? Note that I've uploaded a more comprehensive image. Nyttend (talk) 21:30, 12 March 2011 (UTC)
- The usual method is that water gets between the layers, freezes, expands, and breaks the layer off a bit further with each cycle. As for the color, water may be the culprit there, too, if the broken off pieces are able to dry out due to increased surface area and temperature (they would be air temperature, while the attached pieces would be closer to the ground temperature). You might want to wet them down and see if they then look the same. StuRat (talk) 21:35, 12 March 2011 (UTC)
- Yep, classic spalling / exfoliation. I also agree with StuRat; the flakes just look dryer to me. SemanticMantis (talk) 21:55, 12 March 2011 (UTC)
Preventing earthquake/Tsunami damage by triggering them?
Can we prematurely trigger e.g., the expected next Cascadia megatrust earthquake, using hundreds of simultaneous underground nuclear explosions along the fault line? Then everyone can be evacuatated well in advance of the event and no one will die. Radiation is contained just as in ordinary nuclear tests, so there isn't a big issue here, it seems to me... Count Iblis (talk) 21:50, 12 March 2011 (UTC)
- A priori, I would say: 1. It's not clear that you can trigger an earthquake with nukes. Nukes are big on a human scale but not a geologic scale. 2. In the example you give, the fault line is well under the sea floor. That would present a few logistical difficulties to say the least. 3. Radiation is contained when you know what the seismic and geological characteristics of the ground are. (And even then, sometimes mistakes happen.) In this example, you would be trying to affect the geology rather drastically. That seems problematic for containment. 4. The uncertainties are rather gigantic. 5. Politically infeasible. --Mr.98 (talk) 22:47, 12 March 2011 (UTC)
- Also, the nukes would probably only work to trigger a quake if it was just about ready to go, anyway. And, if we are able to predict that, then we really don't need the nukes, just evacuate everyone when it's ready to go. StuRat (talk) 23:30, 12 March 2011 (UTC)
- Some years ago I remember seeing or reading something about a situation in the US where water was pumped into or out of the ground, and this had an effect on the rates of minor earthquakes in that area. 92.15.8.206 (talk) 00:27, 13 March 2011 (UTC)
- You are referring to the Denver earthquakes, where seismicity was triggered by injecting liquid waste into a deep borehole (3671 m) at the Rocky Mountain Arsenal, see here, this was due to changes in the effective stress on existing fault planes caused by increased pore fluid pressures - basically as rocks are more deeply buried they become harder to fault, but if you reduce the confining pressure by pumping fluids in this allows small adjustments on the existing faults to release some of the stored elastic strain energy in the form of earthquakes. Mikenorton (talk) 09:19, 13 March 2011 (UTC)
- The weight of the water might cause the Earth to compress under it, generating tremors. I recall that Hoover Dam had that effect, as Lake Mead filled with water. StuRat (talk) 00:43, 13 March 2011 (UTC)
- If you change the load on part of the crust, by filling a large reservoir or by excavating a large mine, you will change the local stress state, potentially triggering an earthquake. Mikenorton (talk) 09:19, 13 March 2011 (UTC)
- The combined force of the nuclear explosions would need to be at least as great as the tidal forces of the Moon and Sun to trigger an earthquake.predictably. The bomb blasts are impulses that would have to be synchronised and could cause additional havoc by their shock waves. Just the vision of a following radioactive tsunami makes the OP's idea unsellable. Cuddlyable3 (talk) 20:21, 13 March 2011 (UTC)
- You'd be better off pumping water down to lubricate, rather than nuking. 92.15.11.100 (talk) 12:18, 14 March 2011 (UTC)
Seamounts and faults focus tsunamis?
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/84/2011_tsunami_wave_height.jpg/220px-2011_tsunami_wave_height.jpg)
The map of the calculated wave height for the recent tsunami is intriguing. Obviously, it's a simulation, proceeding from known laws, but is there a shorthand way to understand its prediction?
In particular, there are some general rules that seem to apply to that picture:
- The waves typically travel in nearly straight lines - red areas don't spread much and attenuate very slowly.
- When they hit an obstacle they intensify.
- When they hit a seamount/guyot they intensify in a straight line downrange from it, at least for some hundreds of miles.
- California and Oregon receive some extra-special exception to this rule, where the wave gets intensified at the Koko Guyot, travels along a ridge to the east of it, then follows a transform fault all the way to North America. (There's another transform fault to the south that seems to get the same treatment, but many others that seem unaffected)
Do any of these speculations of mine actually represent scientifically known rules that we should add to the article about tsunamis? Wnt (talk) 22:02, 12 March 2011 (UTC)
- Such simulations are not the result of simple applications of physics. They are usually numerical physics models. I suspect this particular plot is created by measuring peak-wave-amplitude in a full 3-D or 2.5-D numerical wave equation modeling exercise. Here's a summary of the MOST numerical wave model used to generate the plot you linked. You can search for prior research-publications on the Pacific Marine Environmental Laboratory tsunami-modeling website, or contact NOAA's researchers for more details of the techniques they use. Waves behave in very complicated ways when they are injected into a nonhomogeneous environment (i.e., variable sea-depth, sea-temperature, salinity, and any other factors that might affect wave propagation characteristics). General ideas about constructive and deconstructive interference might help guide your intuition, but in practice, the complex interactions between the wave and its environment defy "simple" rules. Nimur (talk) 22:55, 12 March 2011 (UTC)
- Comparison of model data with tide gage data is interesting (for example, the model was off by about 10 cm for high-point and about 30 cm for low-point for San Diego). See also the March 11, 2011 Honshu event at NOAA. WikiDao ☯ 23:14, 12 March 2011 (UTC)
- Interestingly, the main direction of the tsunami plume pointed toward Southern Chile at a location south of the 2010 Chile earthquake epicentre, which in turn produced a tsunami that pointed south of this year's Japan earthquake. Modelling would also likely take the Coriolis force into account, and the path of Japan's tsunami seemed to follow some bathymetric seamounts and ridges toward Chile. Subsea surface heights are known to affect sea level. ~AH1(TCU) 01:51, 13 March 2011 (UTC)
- It seems that the simulation is not quite perfect, but I still wonder if a much less sophisticated analysis could be practically useful. For example, if there really are features like transform faults that can aim a tsunami at you, then maybe you could tot up the average intensity of all tsunamis over a century in various coastal towns, and accurately designate "tsunami-prone" areas where you evacuate based on a lower magnitude alert than others. Or if seamounts really intensify it, then someone in the disaster response office can take a look at the first alert about the position of the epicenter and see if it's on the opposite side of a seamount from where he's standing. It would probably be good to have some immediate empirical rules to go by to better refine the alert, before getting the full simulation results. Wnt (talk) 07:39, 14 March 2011 (UTC)
March 13
Changes in personality test results and IQ when the subject is drunk
It is common knowledge that people change their apparant personality when drunk, but are there any research papers that compare the results obtained on Big Five personality traits personality tests and IQ tests for the same subjects after consuming alcohol and when completely sober? Thanks 92.15.8.206 (talk) 00:24, 13 March 2011 (UTC)
- There is a lot more research on the effects of personality on alcohol consumption than on the effects of alcohol consumption on personality. There seems to be a general consensus that drinking increases impulsiveness, but I didn't spot any research that assesses this using standard personality tests. Looie496 (talk) 01:30, 13 March 2011 (UTC)
I suppose the problem with personality tests is that they ask the subject to recall their past behaviour or attitudes, eg "Do you like parties?" which would not be much affected by current intoxication. 92.15.26.29 (talk) 21:35, 13 March 2011 (UTC)
Why do nuclear reactors have batteries for cooling?
They could obtain all the energy they wanted from the heat of the rector. —Preceding unsigned comment added by 212.169.190.126 (talk) 03:12, 13 March 2011 (UTC)
- As far as I understand, normally that's exactly what they do - they need to power the pumps that take the water in, but when the tsunami hit they shut down the reactor and went to diesel to continue cooling. The diesel then failed and they had to go to battery to power the pumps. Again, as far as I know, that's the main power need - pumping, venting, etc. SamuelRiv (talk) 03:52, 13 March 2011 (UTC)
- The first backup, before they had to go their diesel generators, is to take power from the grid. This was impossible because the earthquake had caused all the power stations along the coast to go into auto-shutdown, including their own one. This left them on tneir own with only their own diesels and batteries, which worked fine until the subsequent tsunami flooded them. SpinningSpark 11:29, 13 March 2011 (UTC)
- You only get power from the reactor when everything is working correctly. Hence the need for backup systems. --Mr.98 (talk) 11:58, 13 March 2011 (UTC)
- Also note that according to (most of) the news stories, the batteries were for instruments and controls, and were not for running the cooling pumps. -- 119.31.126.69 (talk) 12:06, 13 March 2011 (UTC)
Yes, I get the idea that a shut-down generator won't generate electricity directly. However, a shut-down reactor still generates heat (right?), so you could connect a Stirling engine with a cooler to generate all the electricity that you want. A part of the cooling would be passive, through the cooler of the Stirling engine, and the rest would be through the power generated through this process. 212.169.183.128 (talk) 12:53, 13 March 2011 (UTC)
- Whether you could even do that in theory would really depend on how you had the plant set up. Have you actually been inside a nuclear power plant? They are not like those idealized reactor diagrams you see that explain how they work. They are massive industrial facilities, the size of many factories put together, with miles of pipe, concrete, and so forth. The turbines themselves fill gigantic rooms, deafeningly whirring away. They are quite a spectacle and I do recommend trying to visit one at least once in one's life, just to get a sense of the scale of the things and the work that goes into running them. I went on a tour of one awhile back and was bowled over by the complexity — you're not just going to rush in and tinker with them, especially not in an emergency situation. It sounds to me like you are either proposing that they'd have such a system already in place (which is probably not economical, considering the specific situation in which it would be useful, which would be quite rare) or adding one on the fly, which seems totally impractical, and not as easy as just using batteries. --Mr.98 (talk) 15:41, 13 March 2011 (UTC)
- No, I was not thinking about an on-the-fly solution after an accident and also not an add-on solution to an already built nuclear power plant, but as an ideal solution. You need a backup cooling anyway, and this cooling system needs to be connected to the reactor somehow, so generating power shouldn't be a problem for it. You are right at pointing out that the nucleus quite rarely melts out (even if it might be happening right now). But, if it does, then the harm is apocalyptic (at least on a local scala). 212.169.183.128 (talk) 15:59, 13 March 2011 (UTC)
- What happened in Japan (earthquake + Tsunami) is probably rare enough, so no one was prepared for this specific case. Once again, accidents happen, when people think they are prepared for something.Quest09 (talk) 16:58, 13 March 2011 (UTC)
- If I understand things correctly, tsunamis are highly correlated with earthquakes; an earthquake that moves the seafloor is highly likely to create a tsunami. Why should one expect the combination to be rare? –Henning Makholm (talk) 20:50, 13 March 2011 (UTC)
- It's the 8.9 earthquake that's rare. --Mr.98 (talk) 00:27, 14 March 2011 (UTC)
- Yes. I expressed myself poorly. The combination (earthquake + Tsunami) is not rare. The violence of both (which also correlates) is not rare. But having such a violent earthquake and violent tsunami is quite uncommon. Quest09 (talk) 02:02, 14 March 2011 (UTC)
- It's the 8.9 earthquake that's rare. --Mr.98 (talk) 00:27, 14 March 2011 (UTC)
- If I understand things correctly, tsunamis are highly correlated with earthquakes; an earthquake that moves the seafloor is highly likely to create a tsunami. Why should one expect the combination to be rare? –Henning Makholm (talk) 20:50, 13 March 2011 (UTC)
- Batteries strike me as being far more flexible and adaptable (and I'm failing to see why they are insufficient). In any case, why assume your engine is going to not be damaged by the quake that damages the plant to that degree? --Mr.98 (talk) 00:27, 14 March 2011 (UTC)
- What happened in Japan (earthquake + Tsunami) is probably rare enough, so no one was prepared for this specific case. Once again, accidents happen, when people think they are prepared for something.Quest09 (talk) 16:58, 13 March 2011 (UTC)
- No, I was not thinking about an on-the-fly solution after an accident and also not an add-on solution to an already built nuclear power plant, but as an ideal solution. You need a backup cooling anyway, and this cooling system needs to be connected to the reactor somehow, so generating power shouldn't be a problem for it. You are right at pointing out that the nucleus quite rarely melts out (even if it might be happening right now). But, if it does, then the harm is apocalyptic (at least on a local scala). 212.169.183.128 (talk) 15:59, 13 March 2011 (UTC)
- They had diesel engines as backup power source. The batteries are said to be for other purposes. Quest09 (talk) 02:02, 14 March 2011 (UTC)
- Undersea nuclear reactors - all the emergency cooling you want. 92.15.26.29 (talk) 21:36, 13 March 2011 (UTC)
production of hydrogen from cooling water in nuclear accident -- was it a thermal decomposition?
It couldn't have been alpha particles or free protons finding electrons, right?
I know how to find the equilibrium reversal temperature to be 2300K. But obviously the pressure conditions are higher inside the nuclear reactor, and both temperature and pressure are increasing at the same time. How do I find the temperature where the equilibrium constant is 1?
Suppose I did start at some reactor pressure T1 -- perhaps I could draw a pressure-temperature curve as the reaction proceeds to T2? How do I calculate the total heat capacity of this reaction? (Is the heat capacity constant within this range, or do I have to account for this too?)
Also, does the presence of thermal decomposition provide a natural sort of "superboiling point" for water? That is, if I were superheating steam initially at 2300K at 1 atm, and suppose pressure were constant (the rxn is taking place in a large bladder or a balloon), would the steam basically stay at this temperature until all of it had converted to 2300K? John Riemann Soong (talk) 03:50, 13 March 2011 (UTC)
Is it accurate to model water as an ideal gas at 2300K and 600 kPa? John Riemann Soong (talk) 03:59, 13 March 2011 (UTC)
- Fukushima I Nuclear Power Plant mentions caesium-137 as a fission product. It is radioactive, but as long as it hasn't decayed yet, it reacts chemically as an alkali metal -- like sodium except more so -- dissociating the cooling water into H2 and OH-. My understanding is that the systems that ordinarily disposes of the released hydrogen safely failed due to the loss of power. –Henning Makholm (talk) 04:45, 13 March 2011 (UTC)
- A nuclear scientist on BBC News last night (sorry, don't remember his name) speculated that the hydrogen was produced, after the cooling pumps had failed, by the oxidation of the zirconium cases drawing oxygen out of the water leaving hydrogen as a by-product. SpinningSpark 09:10, 13 March 2011 (UTC)
- Right. The zirconium is a not very reactive at low temperatures, but at higher temperatures it readily converts with water to the oxide leaving the hydrogen. This is a known problem in nuclear reactors.--Stone (talk) 20:01, 13 March 2011 (UTC)
say me what are you thinking about this subject
about formation of planets in solar system--78.38.28.3 (talk) 05:20, 13 March 2011 (UTC)
Akbar Mohammadzade wrote:
According to recent 30 years observations and increasing knowledge of man about the earth and planets in solar system , some astronomers are trying to give suitable theory about the formation of planetary system . My study has one difference with those theorems , for my goal of finding any solution for several paradoxes that i had list in my last article . from the angle of sun pole with planetary system quarter to existing of heavy elements in our system and the inner heat of earth ,..... Noticing to the recent studies about the origin of heavy elements in first solar nebula I focused on the properties of super novas , if there was this complex of element in thus nebula , that might be huge part of them in sun , but it has made of helium and hydrogen in general , this fact together with defragments of matter in terrestrial planets and giant planets says us some new rules about planetary system . I found out an approach for solving this problem , that it might be this system had created in two or three steps , first the sun and gas giant planets , second the creation of terrestrial planets with matter sent by neighborhood exploded supernova (in place where that conjunct with sun and solar system )and final creation of satellites and moons . In this sent article I say that supernova was send matter toward sun by 17degree angle(orbit of Pluto) and that reached here molten and changed sun quarter angle 7 degrees . akbar mohammadzade Iran university of science and technology --78.38.28.3 (talk) 05:20, 13 March 2011 (UTC)
- That would appear to be an attempt to explain why the Sun and gas giants have fewer heavy elements than the terrestrial planets, moons, and smaller objects. However, that is already explained with a simpler theory, in that small planets, having insufficient gravity, lose their lighter elements, like hydrogen and helium, and thus become proportionally enriched in heavy elements. So, to propose an alternate theory (and expect it to be accepted) you would need to find a way to discredit the existing theory and prove your own. StuRat (talk) 08:46, 13 March 2011 (UTC)
- (after edit conflict with StuRat) It is difficult to give a proper view on the works of Mr Mohammadzade without seeing the full paper, but I presume that it is not available in English as you appear to have translated an abstract yourself. The standard theory of planet formation is explained at nebular hypothesis, and we also have an article on star formation. A few comments on specific points:
- It is quite correct that the universe is 90% hydrogen and 10% helium with very little else. It is not true that this is not the make-up of our own solar system. Most of the mass is in the sun and jupiter which are both mostly hydrogen. The reason that on earth there is little hydrogen (other than in compounds such as water) and virtually no helium is that these elements are too light to be bound by the earth's gravity and 'evaporate' into space.
- It is correct that the heavier elements originate from supernovae. Elements up to iron in the periodic table are produced by nuclear fusion in large stars. These are later spread around by supernovae explosions. Heavier elements are produced by nuclear fission in the actual supernovae explosions themselves. The standard theory would have these heavier elements in place at the time of formation of the solar system, not arriving later as seems to be suggested by Mr Mohammadzade.
- It is quite unlikely that the curreent position of Pluto is where it originated (see Pluto#Origins and cannot therefore be taken as evidence of early solar system events as Mr Mohammadzade suggests.
- SpinningSpark 09:01, 13 March 2011 (UTC)
- notice this discussion :
The mater is separated such as spectrum from mercury to Neptune ,the question is this :suppose one element or particle at any place of first nebula , how did it found that’s same particle from distance which light spends in 22 hours to produce core of earth from nickel and iron?--78.38.28.3 (talk) 09:49, 13 March 2011 (UTC)
- I'm not sure what that is saying, I can't quite parse the sentence. First of all, in a nebula material is drawn inwards and may eventually form stars and planets; material does not travel outwards from the centre. If the question is concerning the differing structures of the planets, there is general principle that the innermost planets have the largest nickel-iron cores (Mercury's core is particularly large in proportion to its size) and the outer planets have the smallest. This is simply because metal is more dense than rock or ice. Likewise rocky structures give way to ices in the outer reaches of the solar system. SpinningSpark 11:51, 13 March 2011 (UTC)
Hypertension and Asthma
How important are the blood pressure readings for a person who is suferring from hypertension and asthma? What is the significance of blood pressure in a person suffering from hypertension and asthma ? aniketnik 08:22, 13 March 2011 (UTC) — Preceding unsigned comment added by Aniketnik (talk • contribs)
- I'm not sure if high blood pressure itself causes or triggers asthma. However, stress may cause both, so there could be a linkage between BP and asthma that way. StuRat (talk) 08:39, 13 March 2011 (UTC)
- In case you don't already know, "hypertension" means high blood pressure. thx1138 (talk) 12:32, 13 March 2011 (UTC)
- Regardless of asthma, hypertension must be controlled because it leads to other comorbidities, primarily diabetes and high cholesterol. Therefore, it is important to get a hypertensive patient's blood pressure below 140/90 (the current standard) or 130/80 (for patients who are diabetic or have chronic kidney disease). Many studies have shown that controlling blood pressure limits progression to other comorbidities and greatly reduces cardiovascular disease risk (see Framingham Risk Score for information on how blood pressure is used to calculate CVD risk). So, knowing blood pressure is very important for hypertensives. -- kainaw™ 18:25, 13 March 2011 (UTC)
Why so cloudy on Venus ?
That is, why hasn't the thick atmosphere been lost to space, since Venus has no substantial magnetic field to deflect the solar wind ? StuRat (talk) 09:08, 13 March 2011 (UTC)
- Our solar wind article says "...planets with a weak or non-existent magnetosphere are subject to atmospheric stripping by the solar wind. Venus, the nearest and most similar planet to Earth in our solar system, has an atmosphere 100 times denser than our own. Modern space probes have discovered a comet-like tail that extends to the orbit of the Earth." Which implies that it is being stripped but presumably will take a long time because the atmosphere is so dense. SpinningSpark 09:27, 13 March 2011 (UTC)
- If it's been blowing off for billions of years, shouldn't it all be gone by now ? Or is it being resupplied in some way ? StuRat (talk) 10:04, 13 March 2011 (UTC)
- Multiple sources confirm that it is being stripped, but I could not find anything to give a timescale (other than it is a lot slower than at Mars). Closest I could find was
"The precise evolution of Venus' atmosphere is not known. Nevertheless, it seems that there is an agreement among specialists that the terrestrial planets' atmospheres result from an evolutionary process which takes several hundred million years (Walker, 1975, Hart, 1978, Melton and Giardini, 1982, Zahnle et al, 1988, Hunten, 1993, Pepin, 1991, 1994). The present atmosphere of Venus is then a secondary atmosphere that acquired its major properties about 1 Gyr after the formation of the Solar System (eg. Hunten, 1993, Kasting, 1993)." [5].
- SpinningSpark 10:58, 13 March 2011 (UTC)
- Why is it slower than Mars ? Shouldn't the solar wind be much greater at Venus ? StuRat (talk) 12:10, 14 March 2011 (UTC)
Note that Venus is believed to be still geologically active. Count Iblis (talk) 14:35, 13 March 2011 (UTC)
- Also note that on Earth, volcanoes are the dominant source of non-anthropogenic and non-biological CO2. On the early Earth, they accounted for virtually all of Earth's greenhouse gases. There might also be other sources of CO2 production; for example, see this paper about the calcite + quartz reaction. --99.237.234.245 (talk) 23:26, 13 March 2011 (UTC)
Video
I'm trying to watch one of my video tapes, but every time I play it, it just grinds to a halt. How can I fix this? jc iindyysgvxc (my contributions) 11:24, 13 March 2011 (UTC)
- Sounds like there is something wrong with the tape itself. I used to work at a video rental store (back when they used to rent videos!!), and it is relatively easy to take them apart and check if everything is spooled correctly. This post explains how to do it. If it were me, I would take it apart, see if everything looks right (nothing is jammed or twisted). I'd also try playing another VHS in the player, just to make sure it isn't the player that is broken. --Mr.98 (talk) 11:53, 13 March 2011 (UTC)
- (ec) Take it to a TV repair shop? Sometimes this is due to the tape becoming loosley wound. If your player will fast forward it without sticking, try winding it fully to the end and then fully rewinding before attempting to play it again. If your player won't do this you could try manually tightening it, but this can be quite tedious. Have you checked if your other tapes play ok? If they don't there is probably something wrong with your player so it needs repairing; if the others do play ok you could also look for dirt or obstructions fouling the tape cassette mechanism. SpinningSpark 11:59, 13 March 2011 (UTC)
To boldly go, though dead, where no man has gone before...
Suppose I wanted my ashes, or to make this quite silly - my brain - to leave the solar system and voyage between the stars like the Voyager probes. Is it within the realm of private citizens to create a rocket that could escape the Sun's gravity? Can I fling my remains out of our solar system? The Masked Booby (talk) 11:58, 13 March 2011 (UTC)
- Not sure about out of the solar system for the price of $995 you can have them sent into space.--NortyNort (Holla) 12:51, 13 March 2011 (UTC)
- For current state of play see space burial (we really do have an article on everything !). The only person whose remains are currently en route out of the solar system is Clyde Tombaugh - approximately one ounce of his ashes have hitched a lift on the New Horizons spacecraft, which crosses the orbit of Uranus in a few days time. To escape the Sun's gravity you either need a dumb payload and a *very* big rocket, or you need a smaller rocket and a mission plan that include one or more gravity assists, which in turn assumes a capability for deep-space tracking and in-flight manoeuvres. Or you could develop a very efficient but highly sophisticated inter-planetary propulsion system, such as an ion thruster. Any of these routes is beyond the reach of any private citizen. Your most affordable option is to pay NASA to put a small portion of your remains on their next flight out of the solar system - I imagine that would cost you around $10 million (the going rate for a space tourism trip on the ISS is $15-$20 million). However, in the current economic climate, you might have a long wait for the next bus. Gandalf61 (talk) 13:17, 13 March 2011 (UTC)
- Well, to expand on the OP's idea, why does it have to be ashes? Why couldn't an uncremated human body make the trip? --KägeTorä - (影虎) (TALK) 13:22, 13 March 2011 (UTC)
- It could, but it might be significantly more expensive, as long as the commercial price tags for lifting stuff into space (even just geostationary orbit) lie at tens of dollars per gram. Of course if you can't find an existing interplanetary probe to hitch a ride on, the cost lifting the payload into Earth orbit might not even dominate. –Henning Makholm (talk) 15:50, 13 March 2011 (UTC)
- I hope the moon is not being contaminated by people's ashes, as the first link claims. 92.24.186.239 (talk) 13:28, 13 March 2011 (UTC)
- The Moon is already "contaminated" by 6 Apollo Lunar Module descent stages, 3 Lunar Roving Vehicles, 2 Lunokhod rovers and umpteen other lunar probes. Compared to the hardware already left on the Moon, a few grammes of sterile human ashes will have little impact. I would be more concerned about the waste of resources involved in a dedicated lunar burial flight (as opposed to hitching a lift on a pre-existing science mission) - it is the complete opposite of a green burial. Gandalf61 (talk) 13:49, 13 March 2011 (UTC)
- I hope the moon will never be used as a deliberate rubbish-tip, even if its for human ashes. It would not be nice to look at the moon and think that it has been despoiled with waste. Exploration-related artifacts are a different matter. I hope governments forbid its use in that way. 92.15.11.100 (talk) 12:23, 14 March 2011 (UTC)
Why bother? The Earth is, sort of, a giant spaceship... Count Iblis (talk) 17:10, 13 March 2011 (UTC)
- There are not a lot of probes leaving to the interstellar space New Horizons spacecraft was the last one. With 2 billion dollar you would be on the save side. NASA or ESA would make a nice mission to a Kuiper belt object and would take your (sterilized) brain with them if you donate the money with a good contract attached to it. Cheaper would be to become the discoverer of Nemesis (hypothetical star) and die well before a mission to that place, like Clyde Tombaugh the discoverer of pluto, who is just now on the way to pluto. Even cheaper would be that your brain gets a Tire balance for a space craft. before launch the moment of inertia is determined and a few weights are installed to adjust the rotation axis. If you can talk NASA into using your brain this would get you to interstellar space.--Stone (talk) 23:38, 13 March 2011 (UTC)
- Since probes are expensive people want to be sure that they reach interstellar space, instead of crashing in somewhere, but suppose one just gives the best shot to create a rocket that can go as fast as needed for leaving the solar system - wouldn`t that just take a large load of fuel and building materials for the rocket? ~~Xil (talk) 02:47, 14 March 2011 (UTC)
- (edit conflict with Xil) You're vastly overestimating the cost, I think. New Horizons is expected to have a 15 year mission cost of just 650 million USD, and that includes the launch costs + spacecraft cost (design and materials) + mission operations + data analysis. If your just sending your body into space, the cost for everything but the launch vehicle is negligible. I can't find a good cost breakdown for that particular rocket configuration (Atlas V 551), but it's certainly less than 300 million USD, probably closer to 200 million USD (the slimmer 401 configuration is cited at 187 million USD). And New Horizons weighs about 1000 lbs. If you can find 5 close friends to get launched into a solar escape trajectory with you, you can cut the costs to less than 50 million USD a piece. If you're cremated (ashes weigh , on average, ~5 lbs per person), you can send about 200 sets of remains into a space, for a per capita cost of under 1.5 million USD. Of course, that means you have to find 200 millionaires who want to be sent out of the solar system after they're dead. Buddy431 (talk) 03:00, 14 March 2011 (UTC)
With so many power plants out of commission, how will Japan import the needed power in the shorter term?
In the longer term, they replace or repair the damaged plants. Right now, nearly all(?) of Japan has rolling blackouts 3 hours a day. (Hopefully from 2-5 AM, but probably not.) That can't keep happening until the power plants are fixed/replaced.
Couldn't they use undersea cables to import power from other nations? What are some other power solutions in the meantime? --70.179.169.115 (talk) 14:57, 13 March 2011 (UTC)
- I imagine that a more efficient model that undersea cables would be to just import big generators and fuel for them. You can move a lot of coal very cheaply and very efficiently on big boats, more cheaply than building undersea power cables, I imagine. But this is just a guess — I haven't run the numbers. --Mr.98 (talk) 15:32, 13 March 2011 (UTC)
- Rolling blackouts have to happen all through the day. Different places get power at different times - that's what "rolling" about them. They could use underpower cables, but only if they are already there - it takes a long time to lay such cables. We have an article, Electricity sector in Japan, but it doesn't cover this question. Since it doesn't mention electricity imports (just fuel imports), I guess there aren't many, which means they won't be able to increase them quickly.
- They will have to reduce demand instead. That usually means cutting off the supply to big factories. They've probably already done that (if any big factories are even able to operate at the moment), but this disaster is on a scale much greater than anything they are prepared for, so it's still not enough. They'll probably get things sorted out over the next few days in terms of supply. What will take longer is fixing the distribution network - there are downed power lines all over the place.
- --Tango (talk) 16:45, 13 March 2011 (UTC)
- Perhaps they won't have to cut the power, or maybe have. Grandiose (me, talk, contribs) 20:55, 13 March 2011 (UTC)
- I was thinking a similar thing (as well as it's entering spring and the temperatures are more mild) but per the OP and news reports, they are instituting rolling blackouts and encouraging people to save power so clearly the reduced power usage due to factories etc shutting down to assess damage (or because they are damaged) isn't enough. On the other hand, I would guess precisely how many power plants are sufficiently damaged that they can't be used remains unclear. I would presume many are shut down at the moment for the same reason as the factories, so the damage can be properly assessed and some of these could potentially be safely operated whether at reduced or full capacity while they are repaired. While likely a high priority task, they are also have tasks with higher priority so this may still take a while yet. Of course other then power plants offline I would guess the national grid has suffered some damage Nil Einne (talk) 00:14, 14 March 2011 (UTC)
- In most places a proportion of theoretically active power plants are down for maintenance, refueling (for nuclear), etc. Those can be brought back on line and restore some capacity, but it takes time to complete whatever the work might be. Lots of utilities keep plants in reserve to meet peak loads. Even so, twelve (?) 500mw - 1 gw plants being off-line, particularly since nukes are considered "baseline load" plants for normal production is hard to make up for. I'm certain that some fossil plants are off-line, and bringing up a damaged grid is a slow process, to ensure that surviving generating units aren't harmed. Acroterion (talk) 02:17, 14 March 2011 (UTC)
- I was thinking a similar thing (as well as it's entering spring and the temperatures are more mild) but per the OP and news reports, they are instituting rolling blackouts and encouraging people to save power so clearly the reduced power usage due to factories etc shutting down to assess damage (or because they are damaged) isn't enough. On the other hand, I would guess precisely how many power plants are sufficiently damaged that they can't be used remains unclear. I would presume many are shut down at the moment for the same reason as the factories, so the damage can be properly assessed and some of these could potentially be safely operated whether at reduced or full capacity while they are repaired. While likely a high priority task, they are also have tasks with higher priority so this may still take a while yet. Of course other then power plants offline I would guess the national grid has suffered some damage Nil Einne (talk) 00:14, 14 March 2011 (UTC)
- Perhaps they won't have to cut the power, or maybe have. Grandiose (me, talk, contribs) 20:55, 13 March 2011 (UTC)
Form work of Plinth Beam or Shuttering of Plinth Beam
How to Calculate Form work of plinth beam in Running Feet. —Preceding unsigned comment added by 182.178.71.47 (talk) 20:11, 13 March 2011 (UTC)
- Note: this question was also asked on the math desk. I don't understand it well enough to figure out which desk is the proper one, but whomever can offer an answer, please add a pointer to the other copy. –Henning Makholm (talk) 20:46, 13 March 2011 (UTC)
- I suggest you consult a professional engineer on how to build formwork for a plinth beam. I suspect there are too many variables involved for us to be able to provide a useful (and safe) answer here.--Shantavira|feed me 21:26, 13 March 2011 (UTC)
- This appears to be a question concerning estimation of materials quantities ("shuttering" or "forrmwork"), rather than a structural question, but Wikipedia's not really the right place for this question in either case. Acroterion (talk) 00:28, 14 March 2011 (UTC)
R68: Possible risk of irreversible effects
What does EU R-phrase 68 actually mean? It seems pretty vague to me. I mean, thanks to entropy pretty much everything has irreversible effects. Horselover Frost (talk · edits) 21:54, 13 March 2011 (UTC)
- And there's R39, too: "Danger of very serious irreversible effects." (Somewhat less vague at least;). WikiDao ☯ 22:07, 13 March 2011 (UTC)
- I think that any answer to this question would have to come from the official specification. They never define "irreversible", but it appears to refer to bodily damage that never heals, as you'd expect. -- BenRG (talk) 23:07, 13 March 2011 (UTC)
- Like pulmanary scarring from enhaling corrosive vapours? Plasmic Physics (talk) 23:45, 13 March 2011 (UTC)
Relativity postulates/ Frames of reference/ Escape velocity
As we all know that the laws of physics are the same in all inertial frames of reference but since speed of light (pulse) is way way greater than its Escape velocity in any inertial frame of reference except black hole therefore shouldn't a pulse of light clock be moving freely and independent of frame of reference of spaceship or any other arrangement carrying the light clock assumably74.198.150.224 (talk) 23:03, 13 March 2011 (UTC)Khattak#1-420
- There is such a thing as a light clock, but it follows the usual rules of time dilation. I'm not sure I understand your question. -- BenRG (talk) 23:09, 13 March 2011 (UTC)
Thanks for your swift response. As we all know that in order to "break free" from any inertial frame of reference (gravitational field) an escape velocity/ speed is needed. Therefore laws of physics are not the same in aforementioned reference frames for something if at or greater than escaping speed.
Simple example
An object on the surface of earth if to be freed from its reference frame needs an escaping velocity of 11.2 km/s.
Thus if this correct then
1- A pulse emerging from top mirror in spaceship moving close to c should follow the same original downward path instead of vertical for inside and inclined for outside observers.
2- Similarly in relativity of simultaneity the two strobe of light striking the front and rear would be the same for both inside and outside observers74.198.150.224 (talk) 04:22, 14 March 2011 (UTC)khattak#1-420.
- Inertial reference frames and gravitational wells are totally different things. There's no such thing as "escaping from an inertial reference frame". -- BenRG (talk) 05:05, 14 March 2011 (UTC)
- The comoving frame of an object on the surface of the Earth is not an inertial frame of reference. For example, if you're standing on the Earth, as measured in an inertial frame of reference you are being accelerated upward, due to the force exerted by the Earth's surface on the bottoms of your feet. An inertial frame of reference is the comoving frame of an object in free fall. Red Act (talk) 12:14, 14 March 2011 (UTC)
Bus travel
Is it generally safer to sit in the front or back of the bus? Imagine Reason (talk) 23:59, 13 March 2011 (UTC)
- Safer from what? Crashes? Mugging? Molestation? Travel sickness? All risks combined? {The poster formerly known as 87.81.230.195} 90.201.110.135 (talk) 01:34, 14 March 2011 (UTC)
- Google searches generally seem to say that any forward facing seat is fine, with some people opining that the seats immediately behind the driver are safest, but none of that seems to have any statistics or any objective research behind it. This guy says that the best seat is towards the middle, though it's played more for humour. Matt Deres (talk) 02:22, 14 March 2011 (UTC)
- Seats at the rear of aircraft or trains are safer, so I expect that rear of buses is also. Wear the seatbelt if the bus has one. But I think bus travel is safer than car travel. 92.15.11.100 (talk) 12:28, 14 March 2011 (UTC)
March 14
Best tsunami strategy for boats?
Assuming you had warning, like everyone on the US west coast did, what would be the best strategy for minimizing damage to your vessel? It seems to be that heading directly out to sea would be the best choice, in order to get past the point where the tsunami begins to stack up and form a real wave. Out in open water the tsunami is only a meter high, or even less, with an enormous wavelength, right? Leaving your boat moored would be the worst choice, would it not? The Masked Booby (talk) 02:17, 14 March 2011 (UTC)
- Heading out to sea is definitely the best choice. That's what most of the fishing boats in Crescent City did, as I understand it. Many, though, for various reasons were not able to do it. Looie496 (talk) 03:33, 14 March 2011 (UTC)
How far inland did the Sendai tsunami wave travel?
How far inland did the Sendai tsunami wave travel? —Preceding unsigned comment added by 173.49.10.83 (talk) 03:33, 14 March 2011 (UTC)
- Most places are saying "More than 5km". APL (talk) 04:22, 14 March 2011 (UTC)
A wave question
Dear Wikipedians:
I had been working on the following wave question:
If a sinusoidal wave has a frequency of 479 Hz and a velocity of 373 m/s, what is the distance between two points that differ in phase by π/3 rad?
My solution is as follows:
λ = v/f = 373/479 ≈ 0.7787
d = λ(π/3)/(2π) = λ/6 ≈ 0.1298 m
However, I am not too sure how valid my second step is, I basically reasoned that the phase difference tells me how much of the 2π cycle is taken up by the horizontal distance between the two points, so that the proportionality would allow me to find the original horizontal distance between the two points. Is this valid?
Thanks,
174.88.32.181 (talk) 03:35, 14 March 2011 (UTC)
- Your method of calculation looks OK. Graeme Bartlett (talk) 06:52, 14 March 2011 (UTC)
Explosimeters at nuke plants
There has reportedly been a second hydrogen explosion at a Fukushima 1 nuke plant (Unit 3, after the earlier Unit 1 explosion), blowing off the masonry walls and roof around a reactor containment. An explosimeter is a gadget which detects when any combustible gas has reached the lower explosive limit of admixture with air. Utilities have used them for many decades to test tor combustible gases in enclosed spaces. Hydrogen detectors are also time tested devices. Do Japanese nuclear plants not have them installed in the outer containment buildings? If they had them, why wouldn't they vent the enclosures with outside air to keep the concentration below the amount which could cause the two violent explosions observed, each of which reportedly injured several workers? Areas which might have combustible gases usually are required in the US and Canada to have all switches, relays and contactors fully enclosed so that a spark cannot ignite an explosive gas mixture. Is thus a not a rule in Japanese nuclear plants? How can they allow two giant explosions in 2 days? Hydrogen is not an exotic substance. Large power generators (not reactors) have been filled with hydrogen for low viscosity cooling of the windings for maybe 80 years, and blowups or fires are rare because hydrogen leaks or buildups are detected and ventilated. There was a hydrogen bubble in the Three Mile Island reactor vessel, but it did not cause an explosion to demolish the building. They had the sense not to just vent it into the containment building and wait for a spark. Edison (talk) 04:17, 14 March 2011 (UTC)
- They might not have wanted to risk contaminating the area with radioactive "stuff" by venting the enclosure? —Ruud 05:33, 14 March 2011 (UTC)
- Nils J. Diaz, a nuclear engineer who led the United States Nuclear Regulatory Commission, blamed it on the Japanese perfectionist culture. [6]F (talk) 11:15, 14 March 2011 (UTC)
- According to Fukushima I nuclear accidents#Explosion of reactor building: "Safety devices should ignite the hydrogen before explosive concentrations are reached but apparently these systems failed." —Ruud 05:39, 14 March 2011 (UTC)
- Isn't it quite easy to put a number of large slow-burning candles in high places to ignite the hydrogen gas? -- Toytoy (talk) 12:09, 14 March 2011 (UTC)
The optical properties of ptfe (teflon)
I am trying to find optical properties/ transmittance data for virgin (opaque) PTFE. Many web sites have mechanical properties but no optical. I wish to use PTFE sheet as a diffuser to measure solar radiation. Is this data available? It is not included in http://en.wikipedia.org/wiki/Polytetrafluoroethylene_(data_page)#Spectral_data.Fredthemuffin (talk) 05:06, 14 March 2011 (UTC)
Characteristics of crab nebula
i read in "astrophysical concepts "by (martin harwit) that the cloud which we see there in crab nebula containes pieces in volume some cube meters . thus it cannot be dust , is it so in other references?[ that was in last my question replyed it is such as oven and low density dust] akbar mohammadzade march 2011 --78.38.28.3 (talk) 06:45, 14 March 2011 (UTC)
- I can't find that in my copy of Harwit (4th edition). In which section did you find that statement? --Wrongfilter (talk) 08:53, 14 March 2011 (UTC)
- that is third edition 1988 chapter nine 9-1 page420 mohammadzade(cicular and about some ten cube meter ) —Preceding unsigned comment added by 78.38.28.3 (talk) 10:53, 14 March 2011 (UTC)
- Third edition is on google books, but page 420 is in Chapter 10. The relevant bit in 9.1 should be here but this doesn't mention grain size. Are you sure that the number you mention doesn't refer to a density? --Wrongfilter (talk) 11:41, 14 March 2011 (UTC)
- that is third edition 1988 chapter nine 9-1 page420 mohammadzade(cicular and about some ten cube meter ) —Preceding unsigned comment added by 78.38.28.3 (talk) 10:53, 14 March 2011 (UTC)
Evolution of the solar core?
The solar core is currently about 150 times denser than water, at 15 million kelvin. Over the next five billion years the Sun will gradually get hotter and larger, which I assume means that its core must get hotter and denser. As I understand the Wikipedia articles, eventually the Sun becomes a red giant following the asymptotic giant branch, until the core consists of degenerate matter and undergoes a helium flash that drives it out on the horizontal branch, but only temporarily. Apparently multiple ? helium flashes at the end of the process end up converting these huge outer red giant layers into a planetary nebula, leaving behind the degenerate core as a white dwarf.
What I wonder is, how does the solar core evolve over this process? How does its heat and density change over the billions of years before the sun becomes a red giant? How quickly does it collapse to degenerate matter as the red giant phase sets in?
Last but not least, for a sci-fi story I'm writing, I'm curious whether it is possible to save the core of sun-like star once it starts to become denser and/or hotter. For example, if you could somehow make a red dwarf star collide with the sun, would that provide fuel and abort the red giant stage in some semi sane period of time (by which I mean, less than 105 years, which I think is what it would be...[7]) If you could somehow inject the hydrogen from the star all the way to the core could it help? (though my favored hyperdrive would be hard to use that way...) Wnt (talk) 08:04, 14 March 2011 (UTC)
- Regarding "...its core must get hotter and denser", getting hotter would cause it to expand, reducing density. As for adding more hydrogen, that sounds like it could work, if you can mange to carry another star there. I would think the hydrogen would find it's way to the core on it's own. StuRat (talk) 11:52, 14 March 2011 (UTC)
My BS detector ...
- [During the first Gulf War] ... Lieutenant Commander Michael Riley was monitoring the radar screens onboard the HMS Gloucester ... he noticed a radar blip off the Kuwaiti coast. ... He couldn't explain why, but the blinking green dot on the screen filled him with fear; ... [It was heading for USS Missouri] ...
- ... The radar blip was located in airspace that was frequently traveled by American A-6 fighter jets, ... It looked exactly like an A-6 on the radar screen. ... the A-6 pilots had gotten into the bad habit of turning off their electronic identification on their return flights. ... the pilots opted for the cloak of silence over Iraqi-controlled airspace. ... [The only way to tell], they could determine the altitude of the blip. ... the type of radar that Riley was using didn't provide him with any altitude information. If he wanted to know the height of a specific object, he had to use a specialized radar system known as the 909 ... Unfortunately, the 909 radar operator had entered an incorrect tracking number shortly after the blip appeared, ...
- ... Riley issued the order to fire; two Sea Dart surface-to-air missiles were launched into the sky. ...
- [The target was shot down.] ... the captain of the HMS Gloucester entered the radar room. "Whose bird is it?" he asked Riley, wanting to know who was responsible for destroying the still unidentified target. ... The results of the investigation were in: the radar blip was a Silkworm missile, ... Riley had single-handedly saved a battleship.
- ... [The British naval officers could not distinguish between the Silkworm and a friendly A-6. based on the records, until] ... the summer of 1993, when Gary Klein started to investigate the Silkworm affair. ...
- ... Because Riley's naval radar could pick up signals only over water -- after a signal went "wet feet" -- he was accustomed to seeing the fighter jets right as they flew off the Kuwaiti coast. The planes typically became visible after a single radar sweep. ... Unlike the A-6, the Silkworm didn't appear off the coast right away. ... it wasn't visible until the third radar sweep, which was eight seconds after an A-6 would have appeared. Riley was unconsciously evaluating the altitude of the blip, even if he didn't know he was doing it.
- ... There was something strange about this radar blip. It didn't feel like an A-6. Although Riley couldn't explain why he felt so scared, he knew that something scary was happening. This blip needed to be shot down.
-- How We Decide (2009) by Jonah Lehrer, pages 28 to 32
This story turns on my BS detector. I find following points very suspicious:
- How could a radar operator fire two Sea Dart missiles and the captain did not know it?
- Could he be in a room other than the bridge?
- The Sea Dart's homing radar is exactly the 909 mentioned in the story. How could he know nothing about the altitude?
- If I were an A-6 pilot and I turned off my IFF for whatever reason, why don't I turn it on if I am being locked by a British targeting radar?
- Now, if a British radar operator used the 909 radar to lock on an unknown target, would the target turned on its IFF if he's a U.S. A-6?
The author only cited two of Gary Klein's books in his bibliography, The Power of Intuition. New York: Doubleday, 2004. and Sources of Power. Cambridge: MIT Press, 1999. I have neither of them. I checked Amazon.com for the index of the first book. It probably does not talk about Riley's instinct.
The author also cited Finlan, Alastair. The Royal Navy in the Falklands Conflict and the Gulf War. London: Routledge, 2004. This book mentioned Riley's story. However, it quoted The London Gazette that reads: "the ship's operation room team swiftly assessed the contact as a Silkworm missile". And it also said the missile's target was another ship beyond USS Missouri. (page 147) And the HMS Gloucester's phalanx (close-in defense system) sprayed several rounds on the USS Missouri even though no one was injured. -- Toytoy (talk) 10:57, 14 March 2011 (UTC)
nuclear plant questions
Two questions from the incident at Fukushima. That BWR has a torus shaped pool, any reason it is in that shape? Why is zirconium used as cladding when it will produce hydrogen in accidents? F (talk) 11:15, 14 March 2011 (UTC)