Wikipedia:Reference desk/Science

Welcome to the science section
of the Wikipedia reference desk.

skip to bottom

Select a section:

• Computing
• Entertainment
• Humanities
• Language
• Mathematics
• Science
• Miscellaneous
• Archives

Want a faster answer?

Main page: Help searching Wikipedia

   

How can I get my question answered?

• Select the section of the desk that best fits the general topic of your question (see the navigation column to the right).
• Post your question to only one section, providing a short header that gives the topic of your question.
• Type '~~~~' (that is, four tilde characters) at the end – this signs and dates your contribution so we know who wrote what and when.
• Don't post personal contact information – it will be removed. Any answers will be provided here.
• Please be as specific as possible, and include all relevant context – the usefulness of answers may depend on the context.
• Note:
  • We don't answer (and may remove) questions that require medical diagnosis or legal advice.
  • We don't answer requests for opinions, predictions or debate.
  • We don't do your homework for you, though we'll help you past the stuck point.
  • We don't conduct original research or provide a free source of ideas, but we'll help you find information you need.

Ready? Ask a new question!

How do I answer a question?

Main page: Wikipedia:Reference desk/Guidelines

• The best answers address the question directly, and back up facts with wikilinks and links to sources. Do not edit others' comments and do not give any medical or legal advice.

See also:

• Teahouse
• Help desk
• Village pump
• Help manual

September 21

Camera lens for fast-paced sports

A friend has a choice of two lenses for her Nikon camera: Nikon 70-200mm f/4 or 70-200mm f/2.8. Which should she buy (price is not the issue) and why? She will be taking photos of professional hockey games. Bielle (talk) 20:21, 21 September 2013 (UTC)

Homework? The "which" and "why" will be well explained in any basics of photography book; she should buy the book before investing in the glass. 88.112.41.6 (talk) 20:34, 21 September 2013 (UTC)

No, not homework. Bielle (talk) 20:46, 21 September 2013 (UTC)

For taking pictures of fast-moving objects, f/2.8 would prob'ly be a better choice, because it will gather more light and thus allow shorter exposure times (which, in turn, will reduce motion blurring). The tradeoff, however, is a shallower depth of field. 24.23.196.85 (talk) 21:04, 21 September 2013 (UTC)

To avoid confusion, in case anyone should interpret 24's answer as indicating that there is a tradeoff in choosing the f/2.8 lens, there isn't (and I'm sure that 24 didn't intend to say there was). F/4 and f/2.8 indicate the maximum apertures of the two lenses. See F-number for a somewhat technical explanation of what these numbers mean. The lower the number, the more light is allowed to pass through the diaphragm. Going from f/4 to f/2.8 doubles the amount of light, allowing you to halve the exposure time, with the advantages in sports photography that 24 explained. It is correct that the depth of field is shallower with the f/2.8 setting. But if you use both lenses at f/4, the depth of field will be the same. Another factor to consider with a telephoto lens, is that you'll easily get a blurred picture because of not holding the camera steadily enough. Is she planning on using a tripod? If not, an f/4 lens with built-in image stabilization might be a better choice than an f/2.8 lens without image stabilization. You said "Nikon lenses", but you are probably aware that there are other manufacturers such as Sigma and Tamron who produce lenses for Nikon cameras. I'd definitely recommend doing some research and reading reviews of the lenses under consideration before buying. --NorwegianBlue ^talk 23:00, 21 September 2013 (UTC)

It also has to be mentioned that in practice you can crank up the ISO value to get the exposure time you need, so what the f/2.8 will allow you to do is to work with lower ISO values which means that you'll have less noise. You do have noise reduction options, but that will affect image sharpness.

Perhaps a moot issue because of motion blurring mentioned above by the IP and NorwegianBlue and also the limitations of the lock on autofocus (you won't be able to use the best autofocus points when using the "lock on mode" to keep a moving target in focus), but in theory a perfect lens with higher aperture has a higher absolute sharpness (the part that is perfectly in focus should be sharper). This is because the angular resolution is of the order of the wavelength divided by the aperture. But I think that even for the best commercially available lenses, the quality of the lens will lead to the maximum image sharpness being quite a bit less than the theoretical limit. The higher quality f/2.8 lens at that diaphragm of f/2.8 will have a similar quality as that other lens at f/4, so I don't think that the maximum image sharpness will be better for that f/2.8 lens. But you would expect that when both lenses are used at the same diaphragm that the higher quality f/2.8 lens should have a better sharpness. Count Iblis (talk) 00:25, 22 September 2013 (UTC)

I shoot the Tamron 70-300mm f/4-f/5.6 lens on my Nikon camera. I recommend it over the 70-200mm and even over the Nikon 70-300mm, and I have done side-by-side comparisons with all of the above. Why would I choose the lower aperture and the off-brand lens?

Truthfully, the super-huge apertures degrade image quality more than they improve it. They defocus - because they have shallower depth of field; but they also defocus because it's harder to build perfect glass at that size. Off-angle lighting and geometric distortion are easily noticeable to me on the f/2.8 70-200mm lens. Chromatic aberration is quite a bit worse than the 70-300mm model.

Besides, you bought a Nikon for its superb image noise performance, right? The sensor and the digital processing on Nikon cameras outperform all the competition - you can verify by checking side-by-side image comparisons at a website like Digital Photography Review. In conventional wisdom, you shoot at lower ISO and wider aperture to reduce noise; but I challenge you you notice noise on a Nikon D90 at ISO400; and I challenge you to do it double-blind at ISO1600 vs. ISO400. So, the supposed rule-of-thumb is less relevant. I've shot plenty of outdoor sports games - night football, even where the lighting is worse than a hockey game - at f/5.6 at 300mm, and never had to slow my shots or worry about noise.

So, why would I recommend the Tamron variant? Most of the time, I would strongly recommend the on-brand lens, because most of the time, the glass and mechanicall quality makes a difference. But on the 70-300mm f/4-f/5.6, I happened to compare the Tamron and Nikkor side-by-side, and found the Tamron vibration reduction mechanism to be quicker and steadier than its on-brand competition, and its image quality was indistinguishable. The extra zoom, vs. a 200mm lens, is nothing to scoff at: you get 50% better control of the framing or your shot, in exhange for a little extra noise that nobody else will ever notice. You get detail and optical sharpness, which you can later trade off in post-production for even lower noise than your f/2.8 can provide.

Ultimately, you should probably rent these lenses and try both. The f/2.8 Nikkor (and many others mentioned) are quite expensive, and if you aren't sure you want it, you should spend the $50 or so to rent it for a weekend from a high quality photography store. Nimur (talk) 13:58, 22 September 2013 (UTC)

Do batteries contain a clear, harmless liquid?

Today I was changing an AA battery, and it was stuck rather hard. I felt it give a little, but some colourless liquid suddenly squirted onto my hands. Terrified that I'd gotten acid on my hands, I immediately (within about 3-5 seconds) I ran to the sink and ran my hands under cold water for about 30 seconds. When I realized I wasn't feeling any pain or burning I stopped, and removed the battery while wearing gloves. What could that liquid have been? Pokajanje|Talk 20:26, 21 September 2013 (UTC)

We don't give medical advice. You should see a doctor if there is evidence of a burn, but the liquid is more likely to be an alkaline than an acid. You did the right thing by running your hands under cold water. I've done exactly the same without any harmful effects. Dbfirs 20:55, 21 September 2013 (UTC)

This is not medical advice. I'm asking what the liquid was. Pokajanje|Talk 21:01, 21 September 2013 (UTC)

The electrolyte in a standard alkaline battery is potassium hydroxide. For KOH's material safety data sheet, see here. Red Act (talk) 21:05, 21 September 2013 (UTC)

The liquid was a suspension of zinc in potassium hydroxide. 24.23.196.85 (talk) 21:07, 21 September 2013 (UTC)

If it was a cheap battery, then the liquid was probably Zinc chloride which is an irritant and can harm skin when in concentrated form (the leaks are often diluted). Dbfirs 21:09, 21 September 2013 (UTC)

Our article on zinc-carbon battery says that they generally contain a "layer of NH4Cl or ZnCl2 aqueous paste". I don't think there's a guarantee about what it is though. I doubt it was potassium hydroxide because when you get that on your fingers and wash they seem really slippery. Wnt (talk) 14:13, 22 September 2013 (UTC)

Your fingers feel slippery with potassium hydroxide because it saponifies the oils on your skin (I realise you probably know that Wnt, but I just wanted to add it for the OP and others). For some reason I have always really liked that fact. Equisetum (talk | contributions) 17:29, 22 September 2013 (UTC)

September 22

NSaid and Ulcers

Why would the interaction between Alcohol & NSaid's substances may contribute to the development of Ulcers in Humans?, And, if it will be Capsaicinoids instead (together with the NSaid's), could that also initiate Ulcers in Humans?

Thanks for your replays. this could be very enlightening Ben-Natan (talk) 02:36, 22 September 2013 (UTC)

Ulcers are believed to be caused by Helicobacter pylori. Nsaids and drinking alcohol probably exacerbate them. μηδείς (talk) 02:44, 22 September 2013 (UTC)

What about Capsaicinoids? Ben-Natan (talk) 14:58, 22 September 2013 (UTC)

Our article says nsaids will also cause ulcers, but doesn't mention capsaicinoids. See Peptic_ulcer#Cause. μηδείς (talk) 17:31, 22 September 2013 (UTC)

Outhouses, sheds, and barns

Why are sheds smaller than outhouses? I would expect "outhouse" to be smallest, "shed" in the middle, and "barns" to be biggest. Nyttend (talk) 07:11, 22 September 2013 (UTC)

Given the irony of choosing "barn" as the term for such a tiny unit, they probably decided to go in reverse order. ←Baseball Bugs ^{What's up, Doc?} carrots→ 10:12, 22 September 2013 (UTC)

Looking at the disparity in sizes between the outhouse and the shed, my guess is that those labels were proposed by two different groups, with little regard for internal consistency. As the article mentioned, the two units are rarely used - likely the proposals for the units were primarily as an ad hoc or nonce joke, without any sort of consideration of how they would be used in long term practice. -- 67.40.209.200 (talk) 16:35, 23 September 2013 (UTC)

While the outhouse article describes it as a privy covering a pit toilet, I always thought is was more in the non-North American sense of a larger outbuilding. Compare a scottish outbuilding to a shed and the difference is clear. A barn is obviously larger then both. Astronaut (talk) 19:09, 23 September 2013 (UTC)

the effect of a working propeller on a plane

The propeller is known to produce thrust moving the plane forward. What side-effects does it have on the plane besides the main one ? In particular, a) does it tend to shift the plane off its main direction due to sense of which the blades turn ? b) is it responsible for raising the plane's tail while running on the runway, and if it isn't, what physical cause does raises it ? BentzyCo (talk) 15:01, 22 September 2013 (UTC)

The article propeller doesn't have much if anything to say about it, so either the editor didn't find anything or it's not a problem. As for what raises the tail, it's lift. Basically, once sufficient speed has been attained, the tail is going to rise. ←Baseball Bugs ^{What's up, Doc?} carrots→ 15:37, 22 September 2013 (UTC)

Besides thrust, the propellor in being turned by the engine imparts a twisting effect on the aeroplane. In high performance aircraft with single engines, this makes the plane easier/harder to turn in one dirrection than the other. It was aserious limitation of the Japanese Zero fighter. It can also make for some tricky handling on takeoff, as the plane tries to tip over, requiring the pilot to initially correct strongly for it, then taper off as speed builds up and the aircraft control surfaces begin to work more effectively. The WW2 Spitfire fighter was noted for this. The spinning propellor also acts a gyroscope, causing precession forces, making the plane try to climb or dive when turning to right or left. Pilots soon learn to correct for this. In twin engine planes, the props usually turn in opposite directions to cancel out these effects.

Because the spinning propellor casues a corkscrew motion of the air, power is wasted and as the air tries to goes past the fuselage and wings on an angle instead of parallel, drag is increased. Contra-rotating propellors eliminate these propblems.

The tail rising as the plane builds up speed down the runway is essentially a design feature or good pilot practice for tail dragger aircraft - so the pilot can see the runway ahead. Until you get enough speed to lift the tail, slewing the plane right and left alternately is sometimes practiced so you can see where you are going and avoid unexpected obstacles. The tail lift is achieved by a suitably designed tail aerofoil. In aircraft with a tricycle undercarriage, tail lift before takeoff is not done, as with the plane more or less level, the pilot can see the runway ahead anyway.

121.215.0.157 (talk) 15:43, 22 September 2013 (UTC)

"In twin engine planes, the props usually turn in opposite directions to cancel out these effects." Nope - only true for a small minority of twin-engined propeller-driven aircraft. AndyTheGrump (talk) 16:41, 22 September 2013 (UTC)

And cost makes it obvious why. In off-axis, twin-engines, rotation direction also defines which engine determines the minimum controllable airspeed and designates a critical engine (losing one engine is worse than losing the other). P-Factor and yaw combine for one side and counteract on the other side. Because of this, even twins with counterrotating propellers put the clockwise-rotating engine on the right. Symmetry still has a preference. --DHeyward (talk) 18:57, 22 September 2013 (UTC)

Well, you haven't given an data to backup your claim on cost. Cost is not an obvious factor to me at any rate. I have been involved in selling marine engines >800 kW. In boats with twin engines, the two engines and props turn in opposite directions to improve handling. The only difference between a CW-rotating 4-stroke engine and a CCW-rotating one is: 1) the camshaft, 2) the oil pump, 3) the coolant pump, and 4) the starter motor. In some engines, the arrangement of the oil filters is different so they are easily accessable on the opposite rotating engine in cramped engine rooms. As the manufacturers mass-produce many 1000's of engines in both configurations, the price of an opposite rotation engine is little different and is often the same. 120.145.70.130 (talk) 01:35, 23 September 2013 (UTC)

An interesting example of a twin-engined prop-driven aircraft is the Lockheed P-38 Lightning

Lockheed P-38 Lightning

The engines/propellers are counter-rotating, but the 'wrong' way. With the downgoing propeller blades on the outside, the P-factor makes both engines 'critical'. Apparently it was done like this as it made the aircraft a more stable gun platform. AndyTheGrump (talk) 01:53, 23 September 2013 (UTC)

I think you guys have misunderstood P-factor. P-Factor is the shift of the centre of thrust up or down according to the aircrafts' angle of attack wrt the airspeed. If (say) the aircraft is being rotated into a climb, the prop blades are cutting air slightly slower at the top of the rotation than they are at teh bottom of rotation - so the centre of thrust moves upward away from the prop centre line, increasing the climb. This effect is the same regardless of which engine is the one rotating clockwise. However, which way round the engines are installed still affects handling and performance, as one way the props pull air away from the fueselage and toward the wing tips above the wing, and the other way around they'll do it below the wing, amking for diffrent lift, drag, and climb/dive tendency. If the fuselage, wings, tail, and engines are completely symmetrical, there cannot be any turning or yaw effect, only an up/down or pitching effect. 120.145.70.130 (talk) 02:45, 23 September 2013 (UTC)

That is nonsense. See the FAA handbook linked below: "P-FACTOR — A tendency for an aircraft to yaw to the left due to the descending propeller blade on the right producing more thrust than the ascending blade on the left. This occurs when the aircraft’s longitudinal axis is in a climbing attitude in relation to the relative wind. The P-factor would be to the right if the aircraft had a counterclockwise rotating propeller". AndyTheGrump (talk) 03:22, 23 September 2013 (UTC)

Please explain then why an aircraft, symmetrical about its longitudinal centre, and having oppositely rotating engines symmetrically constructed and installed on the wings, can have an assymetrical effect on flying. If the right engine somehow causes a turning force to the right, then the left engine must cause the same turning force to the left, and the two will cancel. What doesn't cancel are the forces producing a climbing or diving effect. The tendency to yaw left or right occurs in single engine aircraft, or twin engine aircraft with both props rotating in the same direction. 120.145.70.130 (talk) 04:24, 23 September 2013 (UTC)

Obviously, if everything is symmetrical, there is no tendency to yaw - but that doesn't make your definition of p-factor right. P-factor is the movement of the centre of thrust relative to the centre of a propeller as a result of it meeting the incoming airflow at an angle. With two propellers rotating in opposite directions, the displacement of forces cancel out - but it is still there, and it has nothing whatsoever to do with propellers supposedly "cutting air slightly slower at the top of the rotation than they are at the bottom of rotation", which is what you were claiming. AndyTheGrump (talk) 04:46, 23 September 2013 (UTC)

Glad you agree it cancels - not what you implied before. Seeing that we agree that a symmetrical counter-rotating arrangment cancels P-forces out as far as uncommanded yaw is concerned, it would seem that your claim above that making the counter rotating props the "wrong" way round makes both engines critical is incorrect. Both engines will be critical in any case. Only with both props rotating the same (either normal or counter-normal) will one engine be critical. And that is as much, if not more, due to assymetric airflow arising from corkscrewing air than due to centre of thrust shift. Now, how would the prop blades (more correctly the propellor rotation plane) be meeting the airflow at an angle? Three possibilities: They have been installed wrong (not likelly), the pilot has not trimmed correctly (he won't last long then - too much fuel usage), or the pilot is making a yaw or pitch movement. 120.145.70.130 (talk) 05:45, 23 September 2013 (UTC)

This is a science reference desk. It is not a platform for uninformed speculation. A source has been provided which explains what aircraft designers mean by 'P-factor'. Your apparent inability to understand it does not give you license to redefine it as something else. And yes, when I wrote that both engines on the P-38 were 'critical', I was correct - in both cases, a single engine failure will result in P-factor shifting the centre of thrust outboard of the centre of the remaining engine at low speed/high angles of attack - which is what 'critical' means in this context. I suggest that before responding again, you actually read the reference material provided - or even read our article on P-factor, which states the same thing. AndyTheGrump (talk) 12:13, 23 September 2013 (UTC)

I haven't redefined anything. I have said more than once that P-factor/forces arise from the propellor centre of thrust moving away from the rotation centre. That's exactly what it is about. It can move sideways and, it seems unrealised by you Andy, that it can/will move up or down as well, if the aircraft is pitched. About the P-38, you wrote The engines/propellors are counter-rotating, but the 'wrong way'. With the downgoing propellor blades on the outside, the P-factor makes both engines critical. That's nonsense. It matters not whether the outside blades are going up or down, both engines are critical in either case, due to aircraft & engine symmetry. Perhaps you need to read the sources, and your own writings, before making incourteous remarks. Instead, if you think a posting is wrong, try and explain logically why it's wrong, rather than attack the person. In doing so you might find that you are wrong. If not, great, you've taught us something. 120.145.70.130 (talk) 16:05, 23 September 2013 (UTC)

As the federal aviation authority makes entirely clear, airflow encountering a propeller at an angle results in the centre of thrust of a propeller move away from the centre of the propeller. More specifically, with a clockwise rotating propeller (as seen from behind), and the airflow angled upwards from below (as would be typical in slow flight, due to the necessary high angle of attack of the aircraft), the centre of pressure will move to the left, as the downward-going propeller blades on the left hand side encounter the incoming airflow at a greater angle of attack than the upward-going blades on the right hand side. This offsetting of the centre of thrust is known as P-factor. If you want to argue that the FAA is wrong, take it up with them. AndyTheGrump (talk) 18:14, 23 September 2013 (UTC)

P-factor! It's that difficult-to-explain, easy-to-feel tendency to swing (yaw) the airplane to the left, and it has been the death of many a novice pilot who jumped into a more powerful aircraft without adequate training! As expressed above, there are many other non-ideal effects of the propeller: slipstream, prop wash, drag, and so on. The Airplane Flying Handbook goes over all of these details, and the full text is available online from the FAA. Nimur (talk) 16:33, 22 September 2013 (UTC)

We have a very slim article called Torque effect which describes the issue in a single sentence. A better article is at Understanding Propeller Torque and P-Factor on FlightGear wiki - there are some links at the bottom of the page. Alansplodge (talk) 16:48, 22 September 2013 (UTC)

Another effect in single engine planes is the air movement over the tail can effect rudder and elevator/aileron which can change the feeling for T-tail vs. cruciform aircraft. Specifically airspeed of the airplance is more important for T-Tail while propeller rotation can generate more airflow for cruciform tails. Balked landings are where this difference is felt most (full power, landing speed at first). --DHeyward (talk) 18:52, 22 September 2013 (UTC)

Event horizon

I would have two questions about black holes: a photon that on event horizon is radially directed outward black hole would remain stuck at horizon or would fall to singularity (and if yes, in how much time?)? And, hypothetically, if I could surpass c (the speed of light) into a black hole I could escape or I howewer would fall to singularity because there aren't ways to escape? Thanks for answering, 80.181.57.86 (talk) 22:15, 22 September 2013 (UTC)

Sounds similar to above a few days ago. Was this a homework question? --DHeyward (talk) 00:27, 23 September 2013 (UTC)

No, this isn't a homework. It's just a curiosity. 95.247.219.235 (talk) 11:13, 23 September 2013 (UTC)

Yes the photon would remain stuck at the horizon, and if you could hypothetically move faster than light than you would escape the B-hole. Dauto (talk) 18:04, 23 September 2013 (UTC)

But don't in a black hole all direction take to singularity?95.233.90.55 (talk) 00:26, 24 September 2013 (UTC)

Although objects can't move faster than c, an abstract series of events can. For example, if while standing on the Earth, you quickly twist a laser such that the center of the laser beam crosses the moon, the point at which the center of the laser beam crosses the moon will likely move faster than the speed of light. When a series of events moves faster than c like that, they form a spacelike curve, rather than a timelike curve like the world line of an object must be. So I interpret your question about moving faster than c in and out of a black hole as being something like "can spacelike curves pass from outside to inside of an event horizon and then back out again?". The answer to that question is yes. It's generally true that for an object inside the event horizon, all directions point toward the singularity, but that statement is only intended to apply to events within the object's future light cone. A spacelike curve that goes through the object isn't constrained to lie within the object's future light cone, so the same statement isn't applicable to the spacelike curve.

Even straight spacelike curves, i.e. spacelike geodesics, can pass from outside to inside of an event horizon and then back out again. It's hard to find much discussion about the spacelike geodesics in the Schwarzchild geometry, because timelike and null geodesics are generally of much more interest, since they describe the world lines of massive and massless particles, respectively. But the analysis that leads to equations 7.47 and 7.48 in this paper basically applies equally well to spacelike geodesics as to timelike or null geodesics. The only differences are that you use ε=-1 instead of ε=1 or ε=0, and λ is a distance instead of a proper time. With spacelike geodesics, E and L don't have units of energy and angular momentum, but they are still conserved quantities for the geodesic. If you plot V(r) vs. r with, say, G=M=L=1, you'll see that for a range of r from a bit less than 2 to r=∞, V(r) is monotonic decreasing, so as per the paper's analysis, for some values of E r will start off greater than 2, dip below 2 (which is the r for the event horizon), and then go back above 2 again. Red Act (talk) 07:49, 24 September 2013 (UTC)

(The following was moved here from Red Act's talk page.) Excuse me, I am the user that made the question on the possibility to get out from black holes at superluminal speed. So, if I understood, an hypothetical superluminal object could escape event horizon on some circumstances? I made to you this question because I read on a paper that even if could be surpassed c, wouldn't be either possible to escape for the spece curved on itself. Is this wrong? Please answer to me on the post in the reference desk because I have a dynamic IP. Thanks for your interest. 95.233.90.55 (talk) 15:22, 24 September 2013 (UTC)

Well, if I'm wrong, it wouldn't be the first time I've been wrong here on the reference desk. But what I said at least appears to me to be correct, when applying the analysis in the paper I cited to spacelike geodesics in the Schwarzchild geometry. If you've read a contradictory paper, please cite the paper here so that I can take a look at it. If it looks to me like I've said something incorrect again, then I'll retract my statement. Red Act (talk) 16:18, 24 September 2013 (UTC)

I didn't want to criticize what you said, when I wrote "is this wrong?" I was referring to the paper, not to you. I simply wanted to understand the concept. 95.233.90.55 (talk) 16:54, 24 September 2013 (UTC)

I really wasn't offended in the least. I'm a lot more concerned about getting to the truth that I am about whether I stumbled on the journey towards getting there. If you've found a paper that contradicts what I've said, I'd be very interested to read it, so that I can improve my own understanding of black holes. Red Act (talk) 18:03, 24 September 2013 (UTC)

It's still not looking correct to me that within a black hole's event horizon, all directions lead to the singularity, unless you're limiting your discussion to events within a given event's future light cone. It's easy to come up with an example that shows that there exist spacelike curves such that both ends of the curve are outside of a Schwarzschild black hole's event horizon, but the middle of the curve dips inside the horizon:

I'll use ingoing Eddington–Finkelstein coordinates to avoid any issues with coordinate singularities, and for convenience take $c=G=M=1$. Consider the curve defined by $\theta =\pi /2$, $v=0$ and $r=1+2\phi ^{2}$, for $-1\leq \phi \leq 1$. The event horizon is at $r=2$, so $r$ is outside the event horizon at the curve's endpoints when $\phi =\pm 1$, but is inside the event horizon at the curve's middle, when $\phi =0$. The metric says that the interval of a tangent to the curve is simply $ds^{2}=(1+2\phi ^{2})^{2}d\phi ^{2}$. Clearly $ds^{2}>0$ for any $\phi$, so the curve is spacelike everywhere. Red Act (talk) 02:57, 27 September 2013 (UTC)

aren't all heaters perfect?

Isn't a hair drier just as perfect a source of heating as anything else that uses the same number of watts? I came across this answer,

http://answers.yahoo.com/question/index?qid=20110131212343AA1MZBy

But find this response insanely bizarre: "I think its in-effiecient. Hair dryer using filament as its heater. It converts elecrical energy to internal energy, thus transfered as heat. This process generates high entropy. So using heater with refrigeration system is more efficient. "

What can that possibly mean? It sounds completely crank. Other than possibly 'melting' from overuse, i.e. in the first few minutes isn't a hair drier just as perfect in an enclosed small room as anything else (including a computer or anything else) that uses the same number of watts? Thanks. 178.48.114.143 (talk) 22:37, 22 September 2013 (UTC) — Preceding unsigned comment added by 178.48.114.143 (talk)

If you concentrate on what proportion of the energy registered on a premises electric meter is changed into heat at the desired location by a hair drier, then the hair drier is very efficient. But an electric heat pump can use energy to move heat from outdoors to indoors, and the total amount of heat put into the desired location is greater than the energy used to operate the heat pump. Jc3s5h (talk) 23:59, 22 September 2013 (UTC)

True, but of the many direct non heatpump forms of electrical heating, they are all practically 100% efficient at turning electricity into heat. That's not to say they are all equally good at a particular task.Greglocock (talk) 00:28, 23 September 2013 (UTC)

Your body heating the hair naturally while evaporation cools it vs. trying to raise the temperature of your hair beyond body temperature to improve the rate. That creates sink points for the heat the hair dryer generates: the water in the hair and the body as well as loss in transfer to the water. Energy from your body is more efficient at transfer to the water in your hair as a net change in energy from having wet hair vs. not. How much more energy (i.e. calories) do you have to eat to dry your naturally? Since the body is inefficient to begin with basically the only energy difference is going directly to supporting evaporation. Time to dry is dependent on difference between body temperature, water mass and dew point. Everything increases entropy bet some are more efficient in net entropy increase vs. useful work done. You can do the calculation for energy to naturally dry hair estimating water volume, temperature difference between body and room temperature and dew point of ambient. Then calculate the amount of time your dryer is on to dry your hair. --DHeyward (talk) 01:36, 23 September 2013 (UTC)

I don't understand DHeyward's point at all. Nor do I understand the comparison with heat pump. My real question is simple: if there's no electric radiator in a small room, then isn't a hairdrier exactly strictly equivalent to an electric radiator drawing the same number of watts? (i.e. the ancillary action of blowing air around doesn't matter at all whatsoever). 178.48.114.143 (talk) 01:56, 23 September 2013 (UTC)

DHeywood's explanation is affected by poor english - and I don't see how it is relavent to your question either. However the comment about heat pumps is valid. If you you an electric bar radiator, electric hairdryer (which contains a heating element), using light glodes to heat, is all teh same - for every kilowatt of electric power consumed, exactly one kilowatt of heat is imparted to the inside of a closed room. However, heat pumps (reverse cycling airconditioners) work a different way. The electricity is used to run a mechanical process that moves heat energy from the outside of the room to the inside. Typically in domestic airconditioning, only about 400 watts of electric power is needed to move a kilowat of heat from outside the room to the inside. Thus in that sense a heat pump is more energy efficient than a hair dryer, because the heat energy does not come for the electricity supply, it comes from the air outside the room. 120.145.70.130 (talk) 02:30, 23 September 2013 (UTC)

I still don't get it - outside, it's even colder. What is there to 'pump'? The whole point of this question is that it's frikkin cold out. 178.48.114.143 (talk) 03:30, 23 September 2013 (UTC)

It only seems cold to humans, as they are accustomed to keeping themselves at a certain temperature. There's actually not much less heat outside than inside. Absolute zero temperature, 0 Kelvin or -273.15 K (or 0 Rankin or -459.67 F if you are non metric) is the notional temperature at which there is no heat residing in any substance. You may feel cold at 0 C (32 F), but at this temperature, the difference between feeling darn cold and nice and warm is the difference between 273 K and 300 K - not a lot in real terms. The heat in air at 0 C is not zero, it is the heat you have at 273 celcius degrees above absolute zero. 120.145.70.130 (talk) 04:13, 23 September 2013 (UTC)

Look up heat pump and coefficient of performance. IBE (talk) 04:21, 23 September 2013 (UTC)

I haven't done so but I suspect that is cruel advice. A heat pump is a device that can extract the heat energy from one place and pump it into another place, thereby heating the second place. It can do this even if the first place is cooler than the second. This is exactly how a fridge works. You could use it to heat your house using less electricity, that's what a reverse cycle air conditioner does.Greglocock (talk) 06:12, 23 September 2013 (UTC)

What? Judged as an electric heater, a fridge uses less electricity than a normal electric heater?? (To heat a room)? This is amazing news, and 2) in this case why aren't electric radiators mini fridges instead... 178.48.114.143 (talk) 07:41, 23 September 2013 (UTC)

GregLocock was just trying to get you to look at heat in the proper way - as something that can be moved from one place to another, irrespective of the temperatures. He's 100% correct in what he said, but using a fridge in this way is not practical, unless you regard continually loading it with warm things as convenient. Once the frige has moved the heat out of the food and into the room, there is no more it can do until you reload it. 120.145.70.130 (talk) 11:43, 23 September 2013 (UTC)

Viewed as a simple, idealized, thermodynamics problem, the room is (in effect) a system into which electricity flows and heat leaks back out. As you add electricity into the room, the energy content of the room will rise until the energy entering as electricity equals the energy leaving as heat leaving the room. That description is true no matter how you use the electricity. However, energy can be stored inside the room in ways other than as heat. So, for example, you might have a bizarre machine in the room that lifts heavy weights from the floor and hangs them from the ceiling. It would consume electricity and convert it into gravitational potential energy without increasing the temperature of the room. So it's not true that all devices are equally efficient at producing heat from electricity.

The hair dryer starts air moving - giving it kinetic energy without increasing the temperature in the room. But it's likely that over time, those air currents will break up into eddies and eventually friction will convert all of that kinetic energy into heat. So EVENTUALLY, the hair dryer will have converted 100% of the electricity it consumes into heat and could therefore be considered a 100% efficient heater. In general, that will be true of most consumers of electricity...but not all of them. Consider a battery charger. It takes in electricity and uses some of it to effect a chemical change in the battery. Unless you go on to discharge the battery somewhere inside the room, it isn't a 100% efficient heater.

Of course most of these kinds of thing have a finite limit to the amount of energy they can "hide" in the form of chemical change, kinetic, gravitational, etc. If you leave the battery charger plugged in after the battery is 100% charged, then it'll either reduce the amount of electricity it consumes to zero - or it'll start to get warm...and at that point, it too is an 100% efficient heater.

A refrigerator also moves energy within the room from one form to another - and for a brief period between when you plug it in and when the inside is as cold as it can be, the refrigerator will appear to generate more heat than the electricity you pump into it...but once the insides are at the preset temperature, it'll return to being merely 100% efficient.

However, there is a "real-world gotcha". Sound and electromagnetic radiation can leave the room as well as heat. So if your hairdrier makes a noise (which I'm sure it must because it's moving air around) - then some of that sound will leave the room (eg by vibrating the windows) - and that vibration won't turn into heat until AFTER it leaves the room - and since the sound took electrical energy to make - that loss of sound energy will mean that not quite ALL of the electrical energy will turn to heat. Similarly, it's likely that the motor and any electronics inside will produce some small amount of radio frequency emissions - some of which will leak out of the room before turning to heat. Light from the red-hot heating element will somewhat light up the room - and some of that light will escape through windows and under the doors...so again, it's not 100% efficient.

To be sure, the losses incurred by the hair dryer because of those things will be very tiny - but it's enough to ensure that no machine is every going to be exactly 100% efficient - although most will be very close.

The bottom line is that you can't make a perpetual motion machine this way - the energy sum has to stay the same within the room - and no practical machine will be a 100% efficient heater. That said, almost every machine you have is very close to being 100% efficient - and there is probably very little to choose between a space heater, a refrigerator and a TV set at converting electricity into heat. SteveBaker (talk) 14:02, 23 September 2013 (UTC)

Air conditioning units are routinely reversed to warm homes during winter with typical coefficient of performance above 500%, so yes, the good electric heaters are mini fridges. Electric space heaters are designed to be cheap and safe to use, but they are never gonna be a cost effective way to warm a home. Dauto (talk) 14:20, 23 September 2013 (UTC)

Yes, heat pumps (reverse air-conditioners) are really popular here in Texas. They are able to either cool the house in summer or heat it in winter. When in "heat" mode, they are effectively air-conditioning the outside world and dumping the waste heat into the house. Since that waste heat contains both heat extracted from the outside and the waste from it's own internal operation, they are more than 100% efficient in terms of the heat they deliver to the house. Of course overall, they are also chilling the already cold outside world - so overall, they don't produce more heat than they generate. I'm surprised to hear that they can be as much as 500% efficient - but they are certainly very good in situations where you need an airconditioner for summer use anyway. SteveBaker (talk) 14:44, 23 September 2013 (UTC)

The 500% coefficient of performance can only be achieved for mild winter conditions. For instance, here where I live (Central Florida) the low temperature is rarely below freezing. The colder the outdoors, the smaller the coefficient of performance will be. A 300% coefficient is more typical for most of the south unless you use ground source heat pump because the underground water remains quite warm even during bitter cold nights. Further north the coefficient becomes too small and heat pumps aren't a wise choice any more. You will do better if you burn fuel locally (Natural gas or heating oil) instead of burning it at a power plant with a typical efficiency of about 40% and than using that electricity to warm the home. Dauto (talk) 15:10, 23 September 2013 (UTC)

Agreed, but another factor to take into consideration is whether some of the electricity can be generated on site e.g. with photovoltaics. That could swing the choice towards the heat pump. Itsmejudith (talk) 15:57, 24 September 2013 (UTC)

Photovoltaics, using the sun to generate electricity, run at about 16% to 20% efficiency. Given that domestic heat pumps require about 400 W for every 1 kW of heat shifted, you then have an overall conversion of insolation to heat in the room of around 45%. But if you install a glass roof and let the sun shine in (so it works like a solr hot water system), you'll have 90% delivery or better. And don't forget that photovoltaics are expensive. That's because of the large energy cost in making them. 1.122.206.159 (talk) 02:02, 25 September 2013 (UTC)

Better yet, you could run a generator at home using fossil fuels, dump the waste heat in the home and use the produced power to run a heat pump and bring even more heat into the home. Dauto (talk) 18:13, 24 September 2013 (UTC)

Agree with IP 1.222. You don't need a glass roof. Heat builds up under roof-installed PVs, making them less efficient. Since in the proposed case you have a ventilation system anyway, you extract air from the roof space behind the PVs, passing it through the heat exchanger that you already have in the system for extracted air. Win-win. You read it here first. Itsmejudith (talk) 23:33, 26 September 2013 (UTC)

Sorry if I wasn't clear. There are three distinct cases: the "towel" case where the room and towel try to reach equilibrium based on temperature and evaporation, the natural drying "hair" case where the human body provides heat, and the "hair dryer " case where the sources of heat are the human body and the hair dryer. When your hair is wet, there is the ambient room temperature and humidity. Without, the hair dryer, the heat source is the person. The other heat source is the ambient air but without your body, it is just a diffusive equilibrium problem. Your hair will dry like a towel in that case and that is be base rate of drying. Now, if you add in your body (i.e. your head) heating (model your hair as a thermally conducing sphere with a constant 98.6F heat source in the interior of the sphere. The difference in temperature between the interior of the sphere and the room will increase the rate of drying over the base rate of the towel naturally drying. The rate depends on temperature difference and humidity. Your body will burn calories to do this as your hair is cooling your body through evaporation and your body is maintaining a constant temperature. You can calculate how much energy is required to achieve this increased rate (Joules per Kilogram). Now, apply an external heat source (hair dryer) that raises the temperature of your hair above your body temperature. This increases the rate of drying but the heat retained in the hair is inefficient and wasted. The only work you want to do is evaporate water in the hair. I think you will find that 1) the body is an improvement in evaporation over just the static equilibrium towel but the calories required to do this is a fraction above the normal burn rate and is pretty efficient in converting the additional calories needed to heat the water to evaporate faster. 2) the hair dryer converts energy to heat the room as well as the hair. Heating the room only helps if the room air can hold more water but the volume of the room scatters the heat so that it is a sink for heat. Consider of you were outside. The hair dryer would have a negligible affect on the air temperature. All the heat lost to the air is wasted. All the heat that is transferred to already dry hair is wasted. Only heat transferred to the water is doing useful work. That is overall a very inefficient over just the body heating the hair. --DHeyward (talk) 03:16, 27 September 2013 (UTC)

The heat pump efficiency to dry hair would similiar to the body model in that you maintain temperature from the hot side and the ambient room. You can replace the heat temperature from the heat pump with the human body as the heat source for calculation. The point is that natural hair drying is different than just the equilibrium problem of a wet towel. The towel is cooled below room temperature through evaporation and the heat transfer continues until the towel is dry. Natural hair drying is raising the temperature of the hair over the temperature of the towel through body heat. Hair dryers don't transfer all their heat to the water the way the body does (in terms of a delta in calories required). I believe the heat pump is similar to the mechanical energy required to raise and lower a counterbalanced garage door. It's the same as air conditioners. The high pressure compression side raises the temperature while the expander lowers it. The ambient air and humidity next to each of these sides determines the amount of cooling/heating can be done while the energy remains constant. In a heat pump, the outside component is cooled below the external air temperature. That temperature difference causes energy to transfer from "warmer" outside air to the cooler "bulb". As you can imagine, this isn't particularly efficient when it's too humid or too cold outside. you want the dew point to be below the heat pump's cold side and there is also a lower limit on that temperature that the fluid can support. If the outside temperature is below the refrigeration cycle temperature, or if condensation or ice forms, it becomes much more inefficient. Whence, the use is usually restricted to relatively mild and dry winter climates. --DHeyward (talk) 03:16, 27 September 2013 (UTC)

September 23

Biology - Genus: Hepatocystis - conflict - Who described it?

Article Hepatocystis mentioned 'Miller 1908' was the first to describe the genus. According to Taxonomicon the genus Hepatozoon was described by Miller 1908, not Hepatocystis. Unfortunately I can't verify the information in Taxonomicon from a second source. Who could verify it and - if necessary - edit the article? -- from de.wikipedia.org Temdor (talk) 00:33, 23 September 2013 (UTC)

What does the letter V of ECG stand for?

In ECG there is 12 leads, every one of them called V. In example V1 and V2 and V3 and so on... so, what does the letter V stand for? Thank you 95.35.220.182 (talk) 08:43, 23 September 2013 (UTC)

I always assumed it was for "Voltage" as these are points at which electric potential difference (voltage) is measured. This is just an assumption though. -- Q Chris (talk) 08:57, 23 September 2013 (UTC)

The 6 "V" leads are the precordial or "chest leads" (the other leads go on the arms or legs), and they get numbered from 1 to 6 as they are placed across the chest from right to left. I'm not certain why the chest leads are designated with "V", but perhaps it's from "ventrum", the Latin for chest. Actually, the "V" does stand for voltage: The use of chest leads was first described in 1932: Wolferth CC, Wood FC. The electrocardiographic diagnosis of coronary occlusion by the use of chest leads. Am J Med Sci 1932;183:30-35, and the positions were standardized in 1938: Barnes AR, Pardee HEB, White PD. et al. Standardization of precordial leads. Am Heart J 1938;15:235-239. It's in this latter paper that we can find that the "V" stands for voltage. - Nunh-huh 09:45, 23 September 2013 (UTC)

Thank you a lot for the help! 95.35.220.182 (talk) 10:45, 23 September 2013 (UTC)

article of CC

I'm looking for the article for the question what does the letters CC of measurement stand for? I mean about 1CC of medicine for example. 95.35.220.182 (talk) 11:34, 23 September 2013 (UTC)

cubic centimeter. -- Staecker (talk) 11:37, 23 September 2013 (UTC)

Yes, and it is equivalent to 1 ml. 1 table spoon is roughly 14.8 cc. Dauto (talk) 13:52, 23 September 2013 (UTC)

In the metric system, a tablespoon as a measure is generally considered exactly 15 ml, by definition, just as a teaspoon is considered 5 ml. I assume the weird stuff where tablespoons and teaspoons are considered non-integer numbers of ml are due to some conversion from american units of measure? 86.164.30.45 (talk) 20:46, 23 September 2013 (UTC)

Ah, I see from our article that the US considers a tablespoon to be 1/2 fl oz, which is then converted to 14.8 ml. So a standard US tablespoon measure is very slightly smaller than a standard metric tablespoon measure. Still, if you're going to say 'roughly', why not give a round integer? 86.164.30.45 (talk) 20:50, 23 September 2013 (UTC)

I guess I'm not that rough? :-)

Garden Spider doing a spot of trawling?

So i'm in Britain and i've got some Zantedeschia aethiopica (Calla Lillies) sitting outside in a pot inside a washing up bowl. This washing up bowl has a few inches of water in and has many what i assume to be Mosquito larvae swimming round the water inside.

I have noticed that there is what i believe to be a rather large European Garden spider sitting on the water with its mouth submerged (and mouth-pincers(?) moving) and it seems to be slowly moving around the bowl.

What i'm wondering is, is it hunting and also is this usual behaviour? I've also noticed a small clump of soil attached to one of its rear legs and was wondering if it is possible for it to use its web to trawl like a fishing vessel?

I've considered the possibility that it is stuck but it seems to be rather happy on the water surface tension and looks large enough to pull itself out. (Cesdeva (talk) 12:04, 23 September 2013 (UTC))

Depends on the size of the spider, but Raft spiders are semi-aquatic and may exhibit such behaviour. (I don't want to look...) --TammyMoet (talk) 13:32, 23 September 2013 (UTC)

I think you're right. After re-observing, the Spider does look more like it resembles those species within Dolomedes. Now to find out which one... (Cesdeva (talk) 13:53, 23 September 2013 (UTC))

Dehumidifiers >100% efficient have a COP > 1 as heaters.

I read on a forum comment that dehumidifiers have a secondary effect of warming the room, and the amount of heat added to the air is more than 100% of the energy consumed (COP > 1). The reason given was that the latent energy from the water vapour is also emitted into the room. The system was likened to a giant heat pump where the dehumidifier takes the place of the compression side and the sun on the oceans as the evaporator?

Is this correct? If so what percentage extra heating would you get, is it significant or marginal? -- Q Chris (talk) 12:08, 23 September 2013 (UTC)

Note as our article mentions (Heat pump#Efficiency), the word 'efficiency' is generally avoided when talking about such things as efficiency is generally taken to a have a specific thermodynamic definition, instead the Coefficient of performance is normally discussed. Nil Einne (talk) 13:04, 23 September 2013 (UTC)

Noted, I have corrected the question -- Q Chris (talk) 13:31, 23 September 2013 (UTC)

It will generate more heat than the electricity it consumes (by a very tiny amount) only until the room is as dry as it can make it be. At that point, it'll be no more than 100% efficient. You might argue that you can put some water in the room to evaporate and replenish the humidity - but that evaporation would cool the room by exactly as much as the humidifier is more than 100% efficient...so the net benefit in terms of heating drops to zero. SteveBaker (talk) 14:15, 23 September 2013 (UTC)

• At a practical level, the most common way of dehumidifying air is to use an air conditioner, which causes water vapor to condense on the chilling elements. Air conditioners obviously don't warm a room -- rather the dehumidifying effect shows up as a reduction in cooling efficacy. Looie496 (talk) 14:37, 23 September 2013 (UTC)

  But they do heat the outside. If you kept the condenser of the AC unit inside the room with you, and then just drained the water outside, you'd have a dehumidifier that heated the room rather than cooled it. --Jayron32 14:47, 23 September 2013 (UTC)

To actually answer the question asked this (possibly unreliable bloggy) page [1] say they achieved a COP of 1.52, ie 52% increase. This [2] more scientific investigation achieved latent COPs up to about 0.38, ie a 38% improvement, depending on the exact setup. I extracted this data from the graphs at the end of the paper. Latent COP represents only the latent heat of condensation, 1.0 has to be added to this to get the total COP assuming all the power going into the dehumidifier unit ends up as heat in hte room. SpinningSpark 17:37, 23 September 2013 (UTC)

Microwave attacks?

When I was at grammar school in the '60', there was a girl in my class with a birth deformity, which impaired her walking. She was the daughter of diplomats who had been located in Moscow, prior to her birth. There was talk at the time that the Russians were bombarding diplomatic staff with microwaves. Was this ever proved, and have there been instances since of people being damaged by microwave or other forms of electromagnetic or focused radiation? — Preceding unsigned comment added by 31.25.4.14 (talk) 13:20, 23 September 2013 (UTC)

People have certainly been killed accidentally by microwaves, but it's unlikely that they would cause birth defects. Generally speaking it takes ionizing radiation to do that -- microwave photons don't have enough energy to break apart a DNA molecule. Looie496 (talk) 14:32, 23 September 2013 (UTC)

Articles such as this one suggest that the microwave bombardment of the embassy building was done from the late 1950's all the way into the early 1970's. The girl you knew must have been between 11 years old and 17 years (because she was "at grammar school") and you say it was "in the 1960's" - which means that she was conceived sometime between 1943 (17 years old in 1960) and 1958 (11 years old in 1969). We know (eg from this) that the radiation started around 1956 or 57. So if you knew her in your first year at grammar school and it was the late 1960's - then it's just about numerically possible that she was irradiated before birth. Mostly, that seems to have caused cancers in the embassy staff at some unreasonably high rates. The daughter of Franz Misch (who was born in 1968) seems to have suffered mental defects - which might be attributable to the microwave bombardment - and if it was indeed the cause of that - then other deformities are certainly possible.

It would help to know what year you were born (because this girl was in your class - and therefore, presumably, within a year or so of your age) - that would tell us whether she was conceived before all of the microwave business started - which would efficiently disprove your theory.

Obviously there is no possible way to prove it. Children are born with deformities all the time - and microwave bombardment isn't often the cause - so even if she was there during the worst of the attacks, the microwaves might still have had no effect on her.

SteveBaker (talk) 14:35, 23 September 2013 (UTC)

Hmmmm - further down this article, it says: "It turned out that the Soviets had been bombarding us with microwaves, beginning in about 1964 or 1965." - which would totally bust this theory since the girl would have had to be at least 5 years old when the attack started. However, the first reference I found said: "Two retired US Secret service agents who accompanied then Vice-President Richard Nixon to Moscow in 1959 said in 1976 that the embassy was bombarded with such heavy radiation that one radiation detection device was damaged". That report seems a bit suspect to me - I mean, what kind of radiation detector would be damaged in that way? Also, if they had detectors installed in 1959, then you'd presume that the bombardment must have gone on for a while before the attack was noticed and the detectors had to be installed. Then this says that "Washington had known what was going on since the 1960's" - which doesn't fit with a destroyed radiation detector in 1959. Then this says that "US officials noticed that the Soviets had begun directing microwaves at the embassy in 1962, perhaps starting as early as 1953"...so that also confirms that the radiation detector couldn't have been destroyed in 1959 - but throws this new curve ball in by saying it might have started MUCH earlier.

So I guess the start date is a bit "fuzzy". SteveBaker (talk) 15:00, 23 September 2013 (UTC)

And more...this suggests that the microwave bombardment was actually a kind of power source for their system of hidden microphones in the embassy...interesting! SteveBaker (talk) 15:22, 23 September 2013 (UTC)

Indeed sources say it was Steve. See Thing (listening device) (unless that's where you got your spybusters source?) -∇-220 of ^Borg 17:10, 23 September 2013 (UTC)

• Who'da thunk the Soviets were such evil bastards? In any case, Looie496's got it right. Microwaves cause heating, not mutations. The Soviets might as well have been pricking voodoo dolls. μηδείς (talk) 15:36, 23 September 2013 (UTC)

In 1971 the Australian magazine Electronics Today published a full technical explanation, with diagrams and a photo, of the Soviet seal microwave eavsdropping system. Based on the operating principle (passive detection & re-radistion) and the distances involved, only around a few watts from the microwave source are required. Nobody would be hurt by that. 120.145.70.130 (talk) 15:43, 23 September 2013 (UTC)

Could that be in the public domain by now? Though the sources for the on-line explanations are probably the same as ETIs'. -√- 220 of ^Borg 17:10, 23 September 2013 (UTC)

See "Kvikk case" and "Radium Girls" and "SCOJ 2005 No.1977" and "Vatican Radio lawsuit".

—Wavelength (talk) 16:49, 23 September 2013 (UTC)

A more directly relevant article is the Great Seal bug. SpinningSpark 17:08, 23 September 2013 (UTC)

There are a large number of publications on PubMed about microwaves (and terahertz radiation, which was not considered a separate category until recently) and DNA. However, there has not been any finding of teratogenesis in experiments. [3] The caveat there, however, is that experiments with broad-band emissions may not cover the field, because there have been specific, frequency-specific interactions observed in terahertz, to the extent that they are under study for things like identifying pathogenic bacteria in environmental samples. The idea encounters considerable skepticism because these photons do not carry the energy to physically break chemical bonds in DNA - they would have to work by vibrating the strands somehow and shaking loose interacting proteins, etc. But I am not convinced such a thing does not occur. Wnt (talk) 18:33, 23 September 2013 (UTC)

Of course, it is also possible that her mother suffered mutation due to increased cosmic ray radiation during repeated air travel. Wnt (talk) 18:34, 23 September 2013 (UTC)

It might also be the father. The Kvikk case suggests that damage to the father's sperm can cause club-foot - which is exactly the kind of thing that our OP could have seen in this girl. SteveBaker (talk) 19:11, 23 September 2013 (UTC)

You're absolutely right -- sorry, "mother" was a stupid thing to say. Actually, fathers are if anything more prone to mutations in specific genes as the result of aging and background radiation, whereas mothers are a bit more prone to pick up large-scale chromosomal aberrations. Wnt (talk) 04:16, 24 September 2013 (UTC)

So if "The Thing" (aka "The Great Seal Bug") was being illuminated at 330MHz - that's only just barely into the microwave part of the spectrum (normally defined as 300Mhz to 300GHz)...it's going to behave more like low frequency radio wave. It's hard to imagine how that could hurt anyone. For sure, the one documented case of birth defects in embassy staff's children could have been a completely unrelated fluke. But what about the increased cases of cancer?

It would *REALLY* help if our OP could tell us his/her age so we can narrow down the likely range of dates over which this girl would have been exposed to this radiation in the womb. SteveBaker (talk) 19:02, 23 September 2013 (UTC)

Our article may be wrong about the frequency. The source Steve found earlier [4], which seems quite knowledgeable, disputes the assesment of the antenna as a quarter-wave and says it is more likely a half-wave monopole. They, and other sources, put the frequency of operation at 1.1 GHz. Quarter-wave monopoles do not work very well without a ground plane to create an image and this was absent here. It is significant in this respect that later American versions of this device used a quarter-wave dipole. Also, the cavity shown on the diagram (0.775" dia) seems much too small to resonate at 330 MHz. SpinningSpark 19:52, 23 September 2013 (UTC)

A retrospective cohort study of embassy personnel found no adverse health effects of the radiation. A 2012 review of this study (http://www.ehjournal.net/content/11/1/85) concludes: "The conclusions of the original report are supported. Contrary conclusions given in some other reports are due to misinterpretation of the results."

Seems that "an opinion piece, not an intended to be a balanced presentation of the literature" by John Goldsmith got more attention than the mentioned study. Ssscienccce (talk) 11:41, 24 September 2013 (UTC)

There are a couple things I want to contribute. In the 50s & 60s perhaps, the American Embassy in Moscow was driving a station wagon around Moscow streets. It was large and the body was made out of wood. It certainly stood out of other (Russian) cars. The KGB puzzled for a while until they figured out what was going on. The car had hidden microwave detectors inside. They were mapping the Soviet Defense Industry. Radiation of every kind was a hot topic those days.

Aside from microwave there might be another potential source of birth defects in Moscow. They still have so called Kurchatov's Institute where Igor Kurchatov and Alexander Sakharov made the atomic and hydrogen bombs. There was a malfunction there in the 50s resulting in radiation contamination of a large district in Moscow. I don't know how far Kurchatov's Institute is from the American Embassy but can find out.

- Alex174.52.14.15 (talk) 01:28, 25 September 2013 (UTC)

Surgical treatments for Tibialis (Anterior) Tendinitis?

How could Surgery help to solve such a problem? interesting, Thanks. Ben-Natan (talk) 16:34, 23 September 2013 (UTC)

? Ben-Natan (talk) 19:17, 25 September 2013 (UTC)

Donate my personal data to science

I know I can donate my body to science when I die, but I'd also like to donate my personal data, from my DNA to my Gmail and Facebook archives, so that even my weaknesses and failures will ultimately contribute something to society. Is there a way to do this? I have Asperger Syndrome and other reasons to suspect I may be of interest as a case study. NeonMerlin 17:47, 23 September 2013 (UTC)

What scientists are currently doing that research? Is there a presumed religious freedom to have that information destroyed as a funerary right, many ancient religions believed belongings had to follow to the world of the dead. — Preceding unsigned comment added by CensoredScribe (talk • contribs) 19:15, 23 September 2013 (UTC)

And why do you need to wait until you die to do it? Data is easy enough to copy - and if some kind of research did need it, there would be much greater worth if they could come back and ask you questions about it. I guess the key question here is whether Asperger researchers are lacking data of this sort. I rather suspect that they aren't - or we aspies (yes, me too!) would be being asked for it...and I see no sign of that happening. Anyway - there is a list of Asperger research groups here - I suggest you try to contact them to see how you can help. SteveBaker (talk) 20:47, 23 September 2013 (UTC)

Your Gmail and Facebook archives are not your personal data. The people you corresponded with presumably assumed the conversation would be kept private, since they never gave you permission to disclose it. Donating the data to science would violate their right to privacy. --128.112.25.104 (talk) 20:42, 23 September 2013 (UTC)

In American law you own the copyright to letters you send, but not the letters you receive. For example, one can publish one's own collected letters, but can reproduce letters from others in that collection only with permission. μηδείς (talk) 21:02, 23 September 2013 (UTC)

No need to donate, it's already being used. Count Iblis (talk) 00:16, 24 September 2013 (UTC)

Omg! "Your Data: If You Have Nothing to Hide, You Have Nothing to Fear". Sounds familiar! :-/ -ʊ-220 of ^Borg

Count Iblis's website link is a joke/satire website. The correct link to the NSA's website is https://www.nsa.gov and their statement on the recent issue, available online, largely seeks to correct several mischaracterizations of their activity. Nimur (talk) 09:02, 24 September 2013 (UTC)

And what makes you think that the NSA is telling the truth, and the whole truth? I understand that their activities imply keeping things under wraps. (although I don't believe they go through most communications, and I worry more about private companies accessing my data than governmental agencies which could subpoena it anyway). OsmanRF34 (talk) 14:07, 24 September 2013 (UTC)

Because all activities conducted by the National Security Agency are directly accountable to its administrator, and to the Executive and to Congress; not to mention the United States Supreme Court; and after extensively reading about the involved issues - from other sources I trust, including the Senate committee and House committee, and statements provided directly from our Executive, I have decided for myself that I have high confidence that our form of government is able to adequately provide checks and balances, even in situations when confidential material cannot be disclosed to the entire public. I respect that other people may disagree with that position. I also believe that most other people have not chosen to inform themselves about these issues in great depth. Nimur (talk) 14:28, 24 September 2013 (UTC)

Yeah, that's what they want you to believe. I suppose any descent conspiracy theory will dismiss your evidence, but yes, it seems compelling to me. As said above, I worry more about private companies trying to get hold of my data (maybe to improve their credit ratings, or vet my employability?). And I wonder how could I have the same privacy through email that I have through letters (specially considering that the other side would also need some form of encryption, which many are unwilling or unable to implement).OsmanRF34 (talk) 14:49, 24 September 2013 (UTC)

But is NeonMerlin even in the US or US citizens? They didn't say so in their post and their user page is unclear to me although referring to themselves as a university student seems something less likely for someone from the US to say. The statement you linked to mostly talks about protetions for US citizens and those living in the US. It's great that you living in the US as a US citizen can trust the NSA to protect your rights given the checks and balances, but this may be cold comfort to someone who is not in the US nor a US citizen, who may still have legitimate questions over where this leaves them even if they are not particularly hostile to the US or engaged in any extreme activities, particularly considering there is strong evidence that being a close ally may not be enough to protect you (which isn't particularly surprising). Really the only thing going for NeonMerlin is that despite some ridiculious figures banded around, whatever they do, and with no disrespect, it's likely to be so insignificant that it will never get any specific attention (not so much because the US wants to protect their rights but because the cost would be astronomical). Nil Einne (talk) 15:56, 24 September 2013 (UTC)

Do cats despise potential energy?

Why do cats do things like this? I've known many cat owners and many have reported similar things. My own cats do this as well. A small item like a pen will be sitting on a table minding its own business when a cat will come along to knock it off the table for what seems like no reason. I've even seen one of my cats get up onto a shelf with what appeared to be the sole purpose of knocking each and every item off the shelf. Is there a scientific reason for this? Dismas|^(talk) 20:24, 23 September 2013 (UTC)

I don't think their goal is to knock the items down. Exploring an item involves batting it around, and if it's on a shelf, this results in it falling off the shelf. I'd expect similar behavior from a baby. Both also might put the item in question in their mouth to explore it. An adult human might pick the item up, turn it around, then put it back where it was, but cats and babies lack the coordination/fingers to do this.

In the case of the shelf, though, they might want the junk off the shelf so they can sleep there. I've found many cats like high spots, for the better view. They also know they won't be stepped on there. StuRat (talk) 20:47, 23 September 2013 (UTC)

I am fairly certain the appropriate concept here is not entropy, but evil. You don't find dogs doing this stuff. μηδείς (talk) 20:57, 23 September 2013 (UTC)

True, but dogs in turn tear things to pieces. At least for cats that knock things off high places, some things are salvageable. Plasmic Physics (talk) 21:44, 23 September 2013 (UTC)

Tearing things to pieces is a stage with some puppies, and not usual in most dogs. Don't all cats engage in the knocking things down behavior? μηδείς (talk) 02:20, 24 September 2013 (UTC)

Indeed. I have 5 dogs currently and only one of them finds quite a bit of enjoyment in chewing up rawhides. Three of them nibble on them occasionally. And the last has no interest, though it might have something to do with his advanced age. I have 7 cats as well and I have observed most of them knocking things off tables (mostly pens). Dismas|^(talk) 06:50, 24 September 2013 (UTC)

My cat has never done any knocking things off of anywhere, nor has it jumped onto any furniture that we didn't teach it to, ever. Plasmic Physics (talk) 10:01, 24 September 2013 (UTC)

"Ever." As far as you know. ←Baseball Bugs ^{What's up, Doc?} carrots→ 12:52, 24 September 2013 (UTC)

Do what, Dismas? Can you provide a link that doesn't require us to log in to imgur? Astronaut (talk) 15:26, 24 September 2013 (UTC)

Bah! Sorry, Astronaut. Thought I grabbed the universal link. I've changed the link to one that doesn't require login. Apologies, Dismas|^(talk) 16:23, 24 September 2013 (UTC)

I love the concept of cats despising potential energy. Dogs with big tails, in particular Labs, seem to have the same characteristic, though they try to pretend it's accidental. --jpgordon^{::==( o )} 16:42, 25 September 2013 (UTC)

Why does the USA use odd tenths of a Mhz for FM radio?

I noticed that while the United States has radio stations like 99.1, 104.3 and 107.7, in Indonesia and Greece, the same FM band uses stations like 102.6. When was it determined that the USA should use odd tenths and is there any particular reason why? (I flipped a coin in determining whether to post this here or the Entertainment refdesk)Naraht (talk) 23:48, 23 September 2013 (UTC)

It seems to have been an arbitrary choice, as explained here by the FCC. See also FM broadcasting in the United States, based on the lowest frequency a station could use and the bandwidth of each possible channel. Other countries just made a different arbitrary choice or had a different starting frequency With old radios having analog tuning there was no problem going from Europe to the US, but some modern digital radios don't work equally well with both frequency assignment systems. See [5]. Edison (talk) 00:22, 24 September 2013 (UTC)

Of course the FCC site says that the bottom end of the broadcast spectrum is 88.1 and Wikipedia says that there are two stations broadcasting on 87.9, sigh...Naraht (talk)

Years ago I heard that the FCC uses the odd decimals to make everyone have a "point something". So it would be 97.1 instead of 97. I don't know if that is correct. Bubba73 ^{You talkin' to me?} 02:34, 24 September 2013 (UTC)

The FM broadcast band in the US is 88 MHz to 108 MHz and the channel spacing is 200 kHz. As mentioned already, these are arbitrary choices, but given these numbers, it is a simple mathematical consequence that the centre frequencies are an odd decimal. Stations which have overlapping coverage areas, however, are separated by at least 400 kHz. In the UK the radio environment is quite different: there are a lot of stations in an overcrowded space and several nationwide stations broadcasting from multiple sites. Two transmitters with overlapping areas are sometimes spaced at 300 kHz, especially when they are carrying the same nationwide programme.[6] Obviously, one or the other of them must then be on an even decimal centre frequency. The situation in Greece (see List of radio stations in Greece) seems best to be described as anarchy with the regulation system having semi-broken down. I don't know anything about Indonesia but I would guess the reasons for the mix are similar either to UK or Greece or both. [7] says that the Indonesian FM band starts at 87.5 MHz which would naturally lead to even decimal centre frequencies at 200 kHz spacing. List of radio stations in Jakarta, for instance, shows a lot (but by no means all) of stations on even decimals. SpinningSpark 14:46, 24 September 2013 (UTC)

The job of allocating frequncies for broadcast stations is actually quite complicated - more so for AM, where the ground wave may travell 2000 km or more, and there is no "capture effect" (FM receivers have capture effect - a strong signal will render a weak signal on the same frequency inaudible. With AM, the weak station will be audible at low volume), but even for FM it is quite complicated. Here's the basics: 1) stations serving a given city should have widely spaced frequencies to make selection and tuning easy. But not too far apart, or the stations near the edges of the band will be upset as they won't capture listeners tuning between stations. We have some community stations near the top of the band - around 107 to 108 MHz. Hardly anyone knows they are there as all the big name commercial stations are around 94 to 96 MHz. 2) Due to how radios work, downconverting the signal to 10.7 MHz for amplification, two stations separated by 10.7 MHz will together interfere with all other stations in the area. This is due to what is known as cross-modulation in the input circuitry of recievers. 3) Stations that are a multiple of an analog TV channel vision frequency, TV sound frequency, or a multiple of the TV vision/sound separation are at a dissadvantage (in USA and other countries that used NTSC, multiples of 4.5 MHz, making FM channels 90.0, 94.5 MHz, 99.0 MHz, 103.5 MHz bad choices, in standard PAL countries, multiples of 5.5 MHz, ie FM channel 93.5 MHz, 99.0 MHz, 104.5 MHz bad choices, in Britain with unstandard PAL, multiples of 6.5 MHz, making FM channels 91.0 MHz, 97.5 MHz, 104.0 MHz bad choices.) In theory, these issues would not apply if everyone had well designed receivers. An the demise of analog TV has changed things. However, the allocation rules were determined years ago and allow for some people having very cheap poorly performing radios. — Preceding unsigned comment added by 1.122.206.159 (talk) 03:53, 25 September 2013 (UTC)

September 24

Could polar bears move to mainland Norway and survive there?

From Bear Island it's only 400 km to the Norwegian mainland, polar bears are able to swim that distance. So, occasionaly polar bears could arrive in mainland Norway. But could polar bears survive on the mainland? Once on the mainland, the bears may not not need to hybernate, so they wouldn't need to find large amounts of food to build up enough fat reserves for that. They could perhaps supplement their diet with edible thrash they can find at landfills. Count Iblis (talk) 01:22, 24 September 2013 (UTC)

Is your question whether bears eat trash? μηδείς (talk) 02:21, 24 September 2013 (UTC)

This is speculation on my part, but brown bears and polar bears can interbreed. If just one or a few polar bears arrive at Norway, I assume that if they survive and breed, they will be introgressed into the population. Wnt (talk) 04:12, 24 September 2013 (UTC)

My New-Word-of-the-Day: Introgression, --220 of ^Borg 06:22, 24 September 2013 (UTC)

Sure they could. See Churchill, Manitoba where the bears survive uite well. They may eat the garbage but it's not their preferred food. CambridgeBayWeather (talk) 12:21, 24 September 2013 (UTC)

400 km is a huge distance to swim, even for a polar bear. Why would they choose to swim 400 km south when their immediate problem is the lack of sea ice on which to hunt? After all, they don't know that Norway is there, let alone that it might possibly have some tasty rubbish to eat. SpinningSpark 12:46, 24 September 2013 (UTC)

Some [polar bears (GPS tracked) indeed manage to swim those distance], although it's rare. I know that some polar bears reached Island, but above an iceberg. 15:26, 24 September 2013 (UTC)

But if they made it to the equator, would that turn them into cartesian bears? - ¡Ouch! (^{hurt me} / _{more pain}) 09:06, 25 September 2013 (UTC)

Psychotherapy - Control Freak

What is the cure for a control freak? — Preceding unsigned comment added by 31.25.4.14 (talk) 09:03, 24 September 2013 (UTC)

There are a number of things wrong with this question. First, we don't provide medical advice, so can't "cure" anything. Second, there is no clinical definition of "Control Freak". Third, perhaps most importantly, there are, in general, no "cures" for mental issues in the same way that there are cures for the flu, and, really, only a trained psychologist/psychiatrist (like the one diagnosing) should provide anything related to alleviating the issue (as far as possible).Phoenixia1177 (talk) 10:13, 24 September 2013 (UTC)

Most "cures for the flu" don't do that either. It's a virus. Your body's own abilities and time are the main factors in getting rid of it.HiLo48 (talk) 10:22, 24 September 2013 (UTC)

I'm aware of that, but I think it works as an analogy; the point being that the concepts of what "cure" means in the context of the flu compared to ptsd are very different things.Phoenixia1177 (talk) 10:59, 24 September 2013 (UTC)

We have an article on Control freak but I don't think it will help you chill out and stop worrying :) Dmcq (talk) 10:17, 24 September 2013 (UTC)

OP thank you. Perhaps you are being a bit over-literal. I will rephrase. Control freak behaviour, perhaps as a result of psychological/environmental damage, or innate personality, perhaps a personality disorder (not something I suffer from, except in being on the receiving end) are destructive behaviours, to self or others - I wished to know in the context of psychiatry if there is a known method of correcting the personality/behaviour to "normal" (a bit like removing a phobia as one example). So that at the end of treatment, the person is a happy, cheerful, relaxed, fun to be with person instead of control obsessed. — Preceding unsigned comment added by 31.25.4.14 (talk) 11:41, 24 September 2013 (UTC)

Wanting to "fix" someone else's supposed problems in order to benefit yourself, sounds like its own version of "control freak". ←Baseball Bugs ^{What's up, Doc?} carrots→ 12:50, 24 September 2013 (UTC)

WP:AGF BBB. SteveBaker (talk) 13:24, 24 September 2013 (UTC)

I don't assume any bad faith. I merely point out that the OP should consider who he's really trying to benefit. I'd have thought that was an obvious issue: "I don't like the way you behave, and I don't feel like changing in order to accommodate you, so you need to change instead, to accommodate me." ←Baseball Bugs ^{What's up, Doc?} carrots→ 15:15, 24 September 2013 (UTC)

Being a control freak is a personality trait - and unlike "fixing" a phobia, you have a hard time changing someone's core personality - and you might not like what they turn into when you do! If what you're asking is how to manage a control freak at work or at some social grouping, the usual trick is to swamp them with a mindless number of small details to micro-manage. They generally end up either learning to delegate or being so busy that they don't have time to bother you anymore. If the control freak is a spouse - then marriage counciling can do wonders. SteveBaker (talk) 13:24, 24 September 2013 (UTC)

My inner control freak obliges me to point out that you mean "counselling" (with one L, if you insist)AndrewWTaylor (talk) 13:28, 24 September 2013 (UTC)

Cognitive behavioural therapy has had some success with OCD, which is a form of control freakery. --TammyMoet (talk) 20:20, 24 September 2013 (UTC)

My food gives me a warm, glowing feeling...

...but perhaps that's because it's radioactive, containing isotopes like K⁴⁰ and C¹⁴.

So, my questions:

1) Does consuming these radioactive isotopes contribute to aging ?

2) Are they significant mutagens and carcinogens ?

3) Has anyone tried to remove the radioactive isotopes ? For example, if you could remove the radioactive potassium from fertilizers we use to produce food, that should significantly reduce the radioactivity of that food. I'm guessing that this can't be done in a cost effective manner, but just how costly would it be ? (I'm thinking of another aisle in the grocery store next to organic foods, with "low radiation foods", which would sell at a premium price.) StuRat (talk) 12:59, 24 September 2013 (UTC)

They are not significant mutagens, or carcinogens. They are not just in the fertilisers, they are in the very air we breathe, and in the ground, naturally occurring. Removing them would require isotope enrichment which should increase the price of products by several thousand percent. Plasmic Physics (talk) 13:07, 24 September 2013 (UTC)

According to Isotope_separation#Commercial_materials, only three elements have been isotopically separated for commercial materials, and K is not one of them. K^40 is sometimes separated to use as a radioactive tracer to study nutrient cycling, so you could probably look up prices from a scientific supply company. Short answer: I agree with Plasmic: fertilizing with depleted K would be insanely expensive, and have dubious benefit. SemanticMantis (talk) 13:12, 24 September 2013 (UTC)

Yes, but there might be a market for it nonetheless, as there is for organic foods. A "several thousand percent" increase in price might be acceptable to some well-to-do customers. StuRat (talk) 13:18, 24 September 2013 (UTC)

⁴⁰K and ¹⁴C are long-lived with low enough decay energies that they don't really do any significant harm to you. Given that you probably already have the average equilibrium amount of these isotopes in your body (K through homeostasis, C because it's a very common element and you'll be hard-pressed to find anything without it), abruptly stopping your intake isn't really going to do any non-negligible change to your daily radiation dose.

Particularly radiophobic well-to-do customers might be worried enough to consider foods supposedly with limited amounts of them; but if so, I would advise they reevalute their radiation priorities, since your average exposure from the air (mostly Rn) is on average four times as large as your average exposure from food! Double sharp (talk) 14:13, 24 September 2013 (UTC)

One very important unresolved issue is whether or not small radiation doses are bad for you. It might actually be good. The answer is not known for sure. read Radiation hormesis.Dauto (talk) 14:26, 24 September 2013 (UTC)

Or simply it's something we can deal with. Since we are constantly exposed to it, otherwise we would all be dead. OsmanRF34 (talk) 15:29, 24 September 2013 (UTC)

Just a ball-park analysis of price: Regular Glucose-D is available as a food additive and priced at $500/metric ton. Glucose-D labelled with C¹³ is manufacture and sold for medical applications (Carbon MRI specifically), and is priced in the range of $175-1700/gram (guessing that the 6 varieties offered are for how many C atoms in the Glucose molecule are substituted with C¹³). That is a price ratio of ~1,000,000.

Of course, there are several obvious caveats to this analysis (relative abundance of isotopes; refining for C¹³ vs removing C¹⁴; different processes for separation; meeting the medical vs food industry standards; economy of scale etc) but all in all I think the "several thousand percent" estimate would be unduly optimistic. Abecedare (talk) 15:21, 24 September 2013 (UTC)

That million-to-one price estimate is probably about right for something as simple as glucose - but making a carrot with no C¹⁴ in it would likely be a few orders of magnitude harder - and making a steak without C¹⁴ in it would probably cost more than putting a man on the moon. SteveBaker (talk) 15:37, 24 September 2013 (UTC)

Far in the future, someone will dig up the remains of the eccentric billionaire on a C¹⁴-free diet and get very misleading results from the carbon dating. Katie R (talk) 15:55, 24 September 2013 (UTC)

• To address the first two questions: It's unclear whether low-level environmental radioactivity contributes to cancer, because (a) that radioactivity is present everywhere and impossible to get rid of, and (b) many cancers have unknown causes. On the other hand, it's very unlikely that it contributes to aging. Aging seems to be mainly a combination of genetically programmed changes over time, accumulation of protein byproducts in tissue, and gradual shortening of telomeres in the DNA. None of those would be affected by very-low-level radiation. Looie496 (talk) 17:49, 24 September 2013 (UTC)

Why produce metallic technetium?

Does anyone have an idea how and why the Tc shown in the picture in the article might have been produced? (Especially why, since the applications section of the Tc article doesn't mention any use of metallic Tc.) Double sharp (talk) 14:23, 24 September 2013 (UTC)

The obvious explanation is because non-metallic Technetium doesn't exist. When it comes to elements in the vast majority of cases "take it or leave it" is the only choice you have about the form it takes - metals are metalic, non-metals are non-metallic and so on. Some elements have a few different crystal structures e.g. carbon where you do have a choice, but they are the exceptions to the rule. Roger (Dodger67) (talk) 14:50, 24 September 2013 (UTC)

I meant why make Tc the element, not Tc compounds. Double sharp (talk) 14:55, 24 September 2013 (UTC)

The answer, of course, is the same as the answer George Mallory gave when asked why he wanted to climb Everest, at least in spirit. The answer Mallory gave, famously, was "Because it's there". The reason to create metallic technetium is because one CAN create it, and people who don't understand the fundemental human need to do things just to prove one can do them would never understand such reasoning anyways, but acceptable or not, that is the most likely reason why: it serves no greater purpose or reason than that it was possible to do so and someone wanted to do it. --Jayron32 16:56, 24 September 2013 (UTC)

Apparently one reason for producing metallic technetium in bulk is because in that form waste technetium can be processed in a nuclear reactor by neutron capture into stable ruthenium.[8] Presumably such processing of a compound or mixture would produce other undesirable isotopes as well. SpinningSpark 17:05, 24 September 2013 (UTC)

Thanks. Double sharp (talk) 09:58, 25 September 2013 (UTC)

Besides, the hard part is the creation of the elemement, not the chemical processing of the element into a metallic form which can be easily done by standard chemical procedures. So... Why not? Dauto (talk) 17:58, 24 September 2013 (UTC)

It's not that hard to create it, according to the paper I linked U235 yields 6% Tc99 in fission products. Sellafield, according to our technetium article, managed to dump 900 kg of Technetium into the Irish Sea between 1995 and 1999. Producing a couple of small pills of metal out of all that waste does not seem to be such a big deal. SpinningSpark 18:33, 24 September 2013 (UTC)

Is there a mechanism to 'turn off' feelings?

For example, if you are hungry and are confronted by a dangerous situation, would you brain 'turn off' the hunger and activate the being afraid, or at least cautious, feeling? OsmanRF34 (talk) 15:12, 24 September 2013 (UTC)

See Fight-or-flight response, which notes the suppression of various body functions during high stress situations, such as digestion and sexual response. --Jayron32 16:52, 24 September 2013 (UTC)

(EC) Jayron beat me to the link. You also might be interested in the differences between feeling and sensation and emotion and perception. SemanticMantis (talk) 16:57, 24 September 2013 (UTC)

Depression and various psychiatric conditions can supress many urges and "feelings" and various drugs also have such effects. Roger (Dodger67) (talk) 06:59, 25 September 2013 (UTC)

Need some help here!

Last night I left an answer here to the smart insects question and index a photo, but apparently did something wrong in lightroom because the exif info have my real email… can somebody more advance than me fix that? I have read some articles showing how to change all kind of stuff but now I don’t remember and don’t have time so I’ll appreciate that very much… Thanks

https://en.wikipedia.org/wiki/File:Avipa-asesina-LR-.jpg

Iskánder Vigoa Pérez (talk) 15:16, 24 September 2013 (UTC)

I can't see how to edit that page at all. Odd! Suggest you contact a Commons Administrator to delete the page, then re-load it without your e-mail. It appears that that info is added in the camera? You may have to change a setting there too so it isn't added. ExifTool may be applicable here. -©-220 of ^Borg 16:22, 24 September 2013 (UTC)

I can't help here, but thanks for that cool photo! SemanticMantis (talk) 16:22, 24 September 2013 (UTC)

The metadata is embedded in the file so it cannot be removed by editing the page. You need to upload a new version of the file with the metadata removed (or with only the metadata you want to be seen). You can then ask for an administrator on Commons to revdelete the old versions so it can't be seen in the history. Administrators on Wikipedia cannot do this as Commons is a separate project and you have uploaded to Commons, not to Wikipedia. SpinningSpark 16:43, 24 September 2013 (UTC)

I will assist Iskánder and upload a corrected version in case nobody gets to this in the next hour or so. Nimur (talk) 16:53, 24 September 2013 (UTC)

Oh man… I thought it would be easier… that’s very odd, I don’t remember have input my mail in the d90, I don’t even know how to do it — Preceding unsigned comment added by Iskander HFC (talk • contribs) 16:59, 24 September 2013 (UTC)

It's a great photo! Can I ask where geographically was this photo taken? I'd like to try to identify the tarantula hawk species in the image, but I need to know the location for that. Thanks in advance! --Dr Dima (talk) 17:05, 24 September 2013 (UTC)

Above at the insect question [9], Iskander says he's in Cuba. That should be enough of alocation to help ID, unless there are tarantula hawks endemic to different specific valleys or something. SemanticMantis (talk) 18:09, 24 September 2013 (UTC)

Your email was added by PhotoShop when you used it to edit the image -- at some point you set up PhotoShop to use a generic copyright statement that includes your email address. You should be able to remove it by editing the image again with PhotoShop and changing the copyright metadata -- however the version with the email address would still remain in the file history until a Commons admin deletes it. Looie496 (talk) 18:12, 24 September 2013 (UTC)

You can remove the metadata without any application, at least you can in Windows 7. Right click on the file icon on your computer, click on properties, click the details tab, click "Remove Properties and Personal Information". SpinningSpark 18:27, 24 September 2013 (UTC)

Nimur, I watched your notifications, thank you very much, but I’m very short in time, I do renders and only come here to refresh in the inter-times… here you can learn some very interesting things

Thanks all for the answers… the personal data like name and location really doesn’t bother m e, it’s just the email, but if it means too much trouble to cut it out, I’ll be fine, and will take more care next time

Iskánder Vigoa Pérez (talk) 01:03, 25 September 2013 (UTC)

Feminism and Science

Okay, so I'm supposed to be writing a paper on feminism and science, and have to read up as many articles on the topic as I possibly can. What I need is pointers. Can someone recommend good articles written on the topic? (Articles are preferred since going through an entire book is harder with a month's deadline.) I've already collected some essays that anyone can find after googling things like "feminism and science" or "feminism versus science". The reason for posting this here is that some of you might know relatively unknown (or not so obvious) titles or authors. Bonus points if they're pro-science (I'm taking a pro-science stance), and also if they write intelligible English and not the jargon-filled garbage that humanities students are prone to using. 202.153.41.162 (talk) 18:06, 24 September 2013 (UTC)

I'm a bit confused - "feminism versus science" and "pro-science stance" makes it sound like you're framing feminism and science as opposite each other. There are certainly a lot of feminist scientists and pushes to get more women into STEM fields. Parts of the skeptic community heavily push feminist ideals and a pro-science viewpoint. Katie R (talk) 18:36, 24 September 2013 (UTC)

@Katie: I am framing them opposite each other. I don't see where your confusion lies. 202.153.41.162 (talk) 18:53, 24 September 2013 (UTC)

What does "feminism vs. science" mean? That's like saying "abolition vs. mathematics". ←Baseball Bugs ^{What's up, Doc?} carrots→ 19:14, 24 September 2013 (UTC)

[ec]I don't have anything to contribute, but I am curious about how this turns out because it seems like you are comparing apples to pencils here. If we had a better idea of what you were looking for, perhaps we could help a little better. Feminism isn't the opposite of science; it's the opposite of not-feminism. Science is the opposite of unsubstantiated guessing. Mingmingla (talk) 19:15, 24 September 2013 (UTC)

To be more specific, my paper talks about feminists' accusations of how science is a male dominated field, and scientific reasoning is a masculine "tool of oppression" as opposed to feminine intuition. I want articles that talk about how a feminist approach to science might look like, whether it's a reasonable enterprise, or, if not, why. Also whether it's the fault of science in particular that we have more male scientists, or the fault of the society and its constructs. 202.153.41.162 (talk) 19:19, 24 September 2013 (UTC)

Blaming science for how some male scientists might treat female scientists is like blaming the game of baseball when a pitcher throws a spitball. The "fault" is not in science, it's cultural - as in upbringing and old established societal norms, as indicated in the last part of your statement. That's your proper focus for this subject. ←Baseball Bugs ^{What's up, Doc?} carrots→ 19:27, 24 September 2013 (UTC)

• (ec) Obvious intersections are sociobiology and evolutionary psychology. Feminists who are of a want to deny innate differences between the sexes are going to challenge claims that women are designed as nurturers by biology. μηδείς (talk) 19:21, 24 September 2013 (UTC)

Women_in_Science,_Technology,_Engineering,_and_Mathematics_(United_States) would be a good starting point. Skimming it, it seems to cover a lot of the arguments about why women are underrepresented in the fields and approaches for addressing the imbalance. It looks well-referenced, so it should provide quite a few sources for you. Katie R (talk) 19:25, 24 September 2013 (UTC)

Women in computing is one area that interests me. My feeling is that having some women around improves the social aspect and makes teams work better. However even though, umm don't hit me for being non pc here, even though women practically got an automatic pass through in our job screening if they were anyway good enough (we didn't say that!) we still couldn't find the number we wanted because so few go in for computing. The situation used to be much better in the past. Dmcq (talk) 21:02, 24 September 2013 (UTC)

• The "masculine tool of oppression" notion isn't a criticism of a certain type of science, it is an attack on the notion of any objective science--objectivity being one of those masculinist ideas. You might profit from a look at Stephen Hicks' Explaining Postmodernism (just found the book is available for free as a pdf from the author) which is one of the standard college texts on the subject. It gives you a wider context in which to look at such "feminist" attacks. (I'd prefer to call them post-modern feminist, since they have little to do with Friedan or de Beauvoir. μηδείς (talk) 21:27, 24 September 2013 (UTC)

Are you talking about postmodernism-vs-science with a focus on feminism? If so, are you looking for books, internet, or journal resources? It's a topic I used to have an interest in (the broader one), I know I have some material still around at home, if this fits the bill, I can dig some up.Phoenixia1177 (talk) 03:41, 25 September 2013 (UTC)

@Phoenix: That would be much appreciated, thanks! Yes, something along those lines surely. I'm very to new the arts (I've recently shifted from a science background) , so my ideas are still very half-baked. I need to do a lot of reading! (= 202.153.41.162 (talk) 06:08, 25 September 2013 (UTC

• Go to newscientist.com and input your search terms there, "Women in science" and "science and feminism" come up with plenty of hits but you will need to find someone with a subscription to access some of the full articles. Richerman (talk) 22:02, 25 September 2013 (UTC)

Shear force

In the following example, why is the parallel axis theorem used to calculate the second moments of area of the 4 parts of the beam sticking out? Clover345 (talk) 19:29, 24 September 2013 (UTC) http://academic.cuesta.edu/jjones/Engr52/homework/6-29.pdf

Because you need I of the whole beam. Incidentally that answer is a fail, even by my scrappy standards. Random equations that come up with the right answer is not acceptable.Greglocock (talk) 01:10, 25 September 2013 (UTC)

September 25

Controlled Release Medications

I have have certain medications like controlled release melatonin which seem to work mechanically, having an agent that slows there dissolution in the digestive tract. I am curious is this is the sole or typical type of controlled release medicine? Do some CR medicines have a different chemical formulation that changes or slows release or clearing in the bloodstream? I am particularly curious about Zolpidem CR. I don't find any explanation in our article or at the Sanofi website. Thanks. μηδείς (talk) 01:26, 25 September 2013 (UTC)

To clarify, I know from having taken oral morphine after a major abdominal surgery that it is not the morphine itself, but the metabolites that have the most effect. So I wonder if that is the case with controlled release substances--are they designed to take advantage of that phenomenon. μηδείς (talk) 03:57, 25 September 2013 (UTC)

We have a controlled release/time release technology pair of articles. The main methods (by concept, not ordered by popularity or usefulness in certain contexts) are gradually removing a coating to expose the active ingredient, gradually leaching the active ingredient out of a matrix or containment, or chemically cleaving the active ingredient from an inactive-complex precursor. DMacks (talk) 04:07, 25 September 2013 (UTC)

We answered an similar, but unrelated question, a few days ago. The answer can be found in the field of pharmacokinetics. The rate at which a drug enters the blood stream is a matter of a combination of factors, some of it due to the chemistry of the drug compound itself and its natural rate of absorption, and some of it is because of the way the pill is prepared to control how fast the drug is released from the pill, a process called liberation. The so-called "inactive" ingredients (those without pharmacological activity) are actually quite important here; these ingredients are called excipients and they have a lot to do with how the drug is liberated and absorbed. --Jayron32 04:55, 25 September 2013 (UTC)

Okay, so you have both confirmed for me what I expected, there are many means of doing controlled release pills, and it may indeed be a more complicated chemical process than just a physically hard to dissolve tablet, which was the case I ran into when I inadvertently got time release melatonin (anyone who knows how melatonin works would know how silly a product that is) which I had to spend minutes chewing out of their gummy substrate.

So, my specific question is, which of these methods of action applies to Zolpidem CR? Our article doesn't say that they have different formulae or that one is the metabolite of the othert. I couldn't find anything in the Sanofi literature either. So I am curious, can someone find out which of the mentioned mechanisms delays the release of the drug? μηδείς (talk) 05:26, 25 September 2013 (UTC)

PS, to save confusion, I got a BA in Bio as one of my majors as an undergrad, and tested out of Chem 101-102 at an ivy league via my scores in AP chem. So feel free to talk to me about this as a big kid. It help finding the specific info which I am really looking for. Thanks μηδείς (talk) 05:38, 25 September 2013 (UTC)

Zolpidem CR uses hypromellose (hydroxypropyl methylcellulose) for extended release, I think, judging by the difference in ingredients between CR and regular form. Here is some info on the mechanism: http://www.colorcon.com/literature/marketing/mr/Extended%20Release/METHOCEL/English/PTEarticle.pdf Ssscienccce (talk) 05:42, 25 September 2013 (UTC)

Excellent, thanks. μηδείς (talk) 18:50, 25 September 2013 (UTC)

Resolved

Sensation in throat

close request for diagnosis
The following discussion has been closed. Please do not modify it.
Whenever I lean my neck and head down, craning my neck I think it's called, while still standing up, I get a tingling feeling in my throat, as if a bubble is passing through it. It almost feels as if my neck is being fractured, but it isn't painful. What is this sensation called and what exactly is going on here anatomically? Bennett Chronister (talk) 05:41, 25 September 2013 (UTC) Sorry - but it is against guidelines to provide medical advice. Please see Wikipedia:Reference desk/Guidelines/Medical advice. Zain Ebrahim (talk) 09:29, 25 September 2013 (UTC) A clarification: I wasn't asking for medical advice. This isn't bringing me pain or injury or anything. I'm just interested, in an academic way, in what this phenomenon is, since I don't think I've ever read about it. Bennett Chronister (talk) 15:10, 25 September 2013 (UTC) Most likely you're compressing a nerve -- that's the usual cause of a tingling sensation when the body is put into a strained posture. Looie496 (talk) 15:33, 25 September 2013 (UTC) It doesn't mater whether the OP feels pain or not, we cannot suggest a cause for his condition. μηδείς (talk) 20:42, 25 September 2013 (UTC) Resurrecting Henny Youngman... Patient: "It hurts when I do this." Doctor: "Then don't do that." ←Baseball Bugs What's up, Doc? carrots→ 21:06, 25 September 2013 (UTC)

Courting behavior when males ram into each other head first

Is there a scientific term for such a behavior (described in the subject line)? Specifically the rams of bighorn sheep. I was wanting to see a list of other animals that also behaved similarly, but the action doesn't seem to have its own article or category. Rgrds. --64.85.215.13 (talk) 09:05, 25 September 2013 (UTC)

Rutting. Also practised by some breeds of deer and goat (and some humans). --TammyMoet (talk) 09:06, 25 September 2013 (UTC)

I saw that article (Rut (mammalian reproduction)), but figured that ramming was something that was done during the rutting season. So I was hoping there was something on that one specific behavior. --64.85.215.13 (talk) 09:16, 25 September 2013 (UTC)

It is neither courting nor rutting. It's called butting, or locking horns. I also found a nice obsolete word in the OED: to nurt: to push or butt with the horns.--Shantavira|^{feed me} 12:16, 25 September 2013 (UTC)

Mummification

In this distressing case (another link), what exactly does it mean to say that the boy's body was 'mummified', and what could have caused it to happen (as opposed to simply decomposing)? Our article doesn't seem to cover this - it seems to imply that mummification happens as a result of deliberate action or fairly extreme and unusual conditions. AndrewWTaylor (talk) 12:52, 25 September 2013 (UTC)

The body dries out, and the absence of moisture prevents or stops decomposition. The child died in december, in low temperature (near freezing) the decomposition would be slow and with a dry, cold atmosphere and constant draft (open window perhaps) the body could have dried completely. Low bodyweight, absence of food in the digestive system and severe dehydration before death would make it more likely, I assume. Ssscienccce (talk) 13:52, 25 September 2013 (UTC)

<OR here> Based on the first link, it sounds like the word “mummified” was used by the detective constable who discovered the corpse. It is possible he simply misspoke. Based on the description of the smell in the house, it is likely that the body was indeed decomposing. Zain Ebrahim (talk) 14:13, 25 September 2013 (UTC)

(e/c)Yes, mummification is a deliberate preservation of the body, whereas mummify (hence mummified) is used more loosely and can mean "of tissues or organs: to dry or shrivel up." (OED again).--Shantavira|^{feed me} 14:19, 25 September 2013 (UTC)

As I understand it, the smell was coming from rotting food inside the house. They entered the house in september 2011, the boy died in december 2009.

The weather conditions may have contributed as well, see Winter of 2009–10 in Great Britain and Ireland. Very cold air outside would result in very low humidity inside the house. Ssscienccce (talk) 14:41, 25 September 2013 (UTC)

Effect of direction of impact on traumatic brain injury

I heard from a friend that a car crash in which your car is hit from the side is far more likely to kill you then if you were hit from the front. Basically, his explanation was that if the brain experiences sideways acceleration and bounces from left to right instead of from front to back, the middle part of the brain separating the two hemispheres (I believe it's called the Corpus callosum?) is a weak spot and is more likely to tear or suffer damage and you end up with a much worse injury. Is this actually true? If so, would that mean if you were about to drive into a wall, looking away before impact would increase your chance of brain injury?--182.55.86.32 (talk) 14:17, 25 September 2013 (UTC)

If I understand it correctly, PMID 715906 supports the claim that a sideways head acceleration is more damaging than a front-to-back acceleration. However, there are many other factors that come into play when comparing a sideways car crash with a head-on collision. Looie496 (talk) 15:26, 25 September 2013 (UTC)

...the most obvious being that in a head-on collision, you have a nice soft bumper and lots of crumple-zones in front of you to absorb the energy of the collision. Some cars absorb energy by pushing the engine down and behind (which absorbs lots of energy because it's heavy!). In a side impact, there is almost nothing between you and the oncoming vehicle and even with clever design, the car can only crumple in an inch or two before it hits you. Another problem is that your seat back and belt stop you from moving forwards and backwards in a frontal impact - but there is much less there to stop you from sliding sideways in a side impact. Your lap belt will hold your hips in place - but your upper body is hardly restrained at all. A frontal impact in one of the nastiest death-traps ever built - a VW microbus (the last of which is mercifully rolling off the production line in December!) is very often fatal - which is largely because there is nothing between you and the front of the vehicle and it originally had only lap belts. That's a good analogy for a side impact in a modern car. Another issue is that when a car is hit from the front or back, it can usually roll backwards or forwards to retain some kinetic energy and suffer a smaller impact...but the tires on your car strongly resist being pushed sideways in a side impact. Some newer cars now have side-impact airbags to help this situation a bit - but even so, it's not a good way to get into an accident. SteveBaker (talk) 18:04, 25 September 2013 (UTC)

Schizophrenia rat experiments

You know how some research experiments on Schizophrenia use rats? In order to simulate Schizophrenia in rats, it is known that scientists make an environment that is hopelessly inaccessible for the rat. This presumes that rats have some sort of desire going on. The thing is, how do scientists measure desire in rats? Is it possible that the rat may ever grow tired of the object so that the object will not be desirable at all? Also, how do scientists get access to illegal drugs like PCP in order to perform research on rats and thus simulate schizophrenia? 164.107.103.177 (talk) 15:36, 25 September 2013 (UTC)

As far as I can tell you are describing the paradigm called learned helplessness, but that's considered a model of depression, not a model of schizophrenia. Usually the motivation is to escape from something bad, not to gain access to something good. There are no widely accepted animal models of schizophrenia, but our article will give you an overview of the ideas that have been batted around. And finally, in the USA scientists can get access of controlled substances by getting a license from the FDA, although the process is often difficult. Looie496 (talk) 15:51, 25 September 2013 (UTC)

For more on your final question, see Controlled Substances Act, which governs research access to drugs that are not legally available to the public (at least in the USA, there are similar laws and governing bodies in Europe and elsewhere). Basically, the scientists and the producers of such drugs go through a lot of paperwork and government oversight, involving the Food and Drug Administration, and potentially other agencies. SemanticMantis (talk) 15:54, 25 September 2013 (UTC)

aragonite

why are most shells made of calcium carbonate instead of aragonite? — Preceding unsigned comment added by 149.152.20.214 (talk) 15:58, 25 September 2013 (UTC)

Our article on aragonite says that your premise is false, and that most shells are made of a combination of aragonite and calcite. Looie496 (talk) 16:07, 25 September 2013 (UTC)

Nautical twilight

How many kilometers above you is the daylight when it's nautical dawn at sea level? — Preceding unsigned comment added by 12.196.0.56 (talk) 18:14, 25 September 2013 (UTC)

For starters, Nautical dawn is when the "Sun is 12 degrees below the horizon in the morning" according to Dawn#Nautical_dawn. The earth is roughly 152,098,232 km from the sun, and the Earth's radius is roughly 6,371 km. So you should be able to do some geometry from there to get your general answer. Depending on the accuracy you want, you could take seasonal and latitudinal considerations into account. SemanticMantis (talk) 18:26, 25 September 2013 (UTC)

Why the distance from the sun? Maybe I misinterpret the question, but wouldn't it simply be r*(sec(12°)-1) (about 143 km)? Ssscienccce (talk) 19:15, 25 September 2013 (UTC)

I pictured an ant on a basketball, and a flashlight. It seemed to me that moving the flashlight closer to the basketball would change how high the ant would have to go to see the flashlight, starting from a dark portion of the basketball (i.e. the 12° dark position). But maybe I'm missing something too :) SemanticMantis (talk) 20:17, 25 September 2013 (UTC)

You're missing the fact that the sun is so freaking far away that you can consider it to be at infinite so its actual distance doesn't matter.

Bestiality and interspecies mating

Did bestiality evolve from the consequences of interspecies mating? In humans, I am not sure if there is a benefit from interspecies mating, because the offspring may neither be viable nor fertile; therefore, the reproduction - as costly as it is - is futile. How did cultural notions of bestiality evolve? 164.107.214.74 (talk) 22:01, 25 September 2013 (UTC)

You might be interested in our article zoophilia, and concepts like ring species and hybrid species. For what it's worth, my opinion is that the answer to your first question is "no." SemanticMantis (talk) 22:34, 25 September 2013 (UTC)