New Horizons

For other uses, see New Horizons (disambiguation).

New Horizons

Artist's concept of New Horizons when it reaches Pluto in July 2015
Mission type	Pluto flyby
Operator	NASA
COSPAR ID	2006-001A
SATCAT no.	28928
Website	pluto.jhuapl.edu
Mission duration	Primary mission: 9.5 years
Spacecraft properties
Manufacturer	APL · Southwest Research Institute
Launch mass	478 kilograms (1,054 lb)
Power	228 watts
Start of mission
Launch date	January 19, 2006 (2006-01-19) 19:00 UTC (18 years and 7 months ago)
Rocket	Atlas V 551
Launch site	Space Launch Complex 41 Cape Canaveral Air Force Station, Florida, United States
Contractor	International Launch Services
Flyby of Moon
Closest approach	January 20, 2006 (2006-01-20) 04:00 UTC (18 years, 6 months and 30 days ago)
Distance	189,916 km (118,008 mi)
Flyby of (132524) APL (incidental)
Closest approach	June 13, 2006 (2006-06-13) 04:05 UTC (18 years, 2 months and 6 days ago)
Distance	101,867 km (63,297 mi)
Flyby of Jupiter (Gravity assist)
Closest approach	February 28, 2007 (2007-02-28) 05:43:40 UTC (17 years, 5 months and 22 days ago)
Distance	2,300,000 km (1,400,000 mi)
Flyby of Pluto
Closest approach	July 14, 2015 (2015-07-14) 11:49:59 UTC (-3295 days to go)
Distance	12,500 km (7,800 mi)
Instruments Alice Ultraviolet Imaging Spectrometer LORRI Long Range Reconnaissance Imager SWAP Solar Wind at Pluto PEPSSI Pluto Energetic Particle Spectrometer Science Investigation REX Radio Science Experiment Ralph Ralph Telescope SDC Venetia Burney Student Dust Counter

New Horizons is a NASA space probe launched to study the dwarf planet Pluto, its moons and one or two other Kuiper belt objects, depending on which are in position to be explored. Part of the New Frontiers program, the mission was approved in 2001 after cancellation of Pluto Fast Flyby and Pluto Kuiper Express. The mission profile was proposed by a team led by principal investigator Alan Stern of Southwest Research Institute. After several delays on the launch site, New Horizons was launched on January 19, 2006 from Cape Canaveral, directly into an Earth-and-solar-escape trajectory with an Earth-relative speed of about 16.26 kilometers per second (58,536 km/h; 36,373 mph); it set the record for the highest launch speed of a human-made object from Earth. After a brief encounter with asteroid 132524 APL, New Horizons proceeded to Jupiter, making its closest approach on February 28, 2007 at a distance of 2.3 million kilometers (1.4 million miles). The Jupiter flyby provided a gravity assist that increased New Horizons' speed by 4 km/s (14,000 km/h; 9,000 mph). The encounter was also used as a general test of New Horizons' scientific capabilities, returning data about the planet's atmosphere, moons and magnetosphere. After Jupiter, the probe continued towards Pluto. Much of the post-Jupiter voyage has been spent in hibernation mode to preserve onboard systems. On January 15, 2015, NASA reported the New Horizons spacecraft began its approach phase to Pluto, which will result in the first flyby of the dwarf planet on July 14, 2015.

Background

New Horizons on the launchpad

New Horizons is the first mission in NASA's New Frontiers mission category, larger and more expensive than the Discovery missions but smaller than the Flagship Program. The cost of the mission (including spacecraft and instrument development, launch vehicle, mission operations, data analysis, and education/public outreach) is approximately $650 million over 15 years (2001–2016). An earlier proposed Pluto mission—Pluto Kuiper Express—was cancelled by NASA in 2000 for budgetary reasons. After a three month concept study, NASA announced on June 8, 2001 that of the two competing design proposals, New Horizons and POSSE (Pluto and Outer Solar System Explorer), New Horizons will proceed with preliminary design studies for a Pluto flyby mission.

The spacecraft was built primarily by Southwest Research Institute (SwRI) and the Johns Hopkins Applied Physics Laboratory. The mission's principal investigator is Alan Stern of the Southwest Research Institute (formerly NASA Associate Administrator).

Overall control after separation from the launch vehicle is performed at Mission Operations Center (MOC) at the Applied Physics Laboratory. The science instruments are operated at Clyde Tombaugh Science Operations Center (T-SOC) in Boulder, Colorado. Navigation, which is not real-time, is performed at various contractor facilities, while the navigational positional data and related celestial reference frames are provided by the Naval Observatory Flagstaff Station through Headquarters NASA and JPL; KinetX is the lead on the New Horizons navigation team and is responsible for planning trajectory adjustments as the spacecraft speeds toward the outer Solar System.

New Horizons was originally planned as a voyage to the only unexplored planet in the Solar System. When the spacecraft was launched, Pluto was still classified as a planet, later to be reclassified as a dwarf planet by the International Astronomical Union (IAU). Some members of the New Horizons team, including Alan Stern, disagree with the IAU definition and still describe Pluto as the ninth planet. Pluto's satellites Nix and Hydra also have a connection with the spacecraft: the first letters of their names (N and H) are the initials of New Horizons. The moons' discoverers chose these names for this reason, plus Nix and Hydra's relationship to the mythological Pluto.

In addition to the science equipment, there are several cultural artifacts traveling with the spacecraft. These include a collection of 434,738 names stored on a compact disc, a piece of Scaled Composites SpaceShipOne, and a flag of the USA, along with other mementos.

About an ounce of Clyde Tombaugh's ashes are aboard the spacecraft, to commemorate his discovery of Pluto in 1930. A Florida-state quarter coin, whose design commemorates human exploration, is included, officially as a trim weight. One of the science packages (a dust counter) is named after Venetia Burney, who, as a child, suggested the name "Pluto" after the planet's discovery.

Design and construction

Spacecraft subsystems

The spacecraft is comparable in size and general shape to a grand piano and has been compared to a piano glued to a cocktail bar-sized satellite dish. As a point of departure, the team took inspiration from the Ulysses spacecraft, which also carried a radioisotope thermoelectric generator (RTG) and dish on a box-in-box structure through the outer Solar System. Many subsystems and components have flight heritage from APL's CONTOUR spacecraft, which in turn had heritage from APL's TIMED spacecraft.

The spacecraft's body forms a triangle, almost 0.76 m (2.5 ft) thick. (The Pioneers have hexagonal bodies, while the Voyagers, Galileo, and Cassini–Huygens have decagonal, hollow bodies.) A 7075 aluminium alloy tube forms the main structural column, between the launch vehicle adapter ring at the "rear," and the 2.1 m (6 ft 11 in) radio dish antenna affixed to the "front" flat side. The titanium fuel tank is in this tube. The RTG attaches with a 4-sided titanium mount resembling a grey pyramid or stepstool. Titanium provides strength and thermal isolation. The rest of the triangle is primarily sandwich panels of thin aluminium facesheet (less than 1⁄64 in or 0.40 mm) bonded to aluminium honeycomb core. The structure is larger than strictly necessary, with empty space inside. The structure is designed to act as shielding, reducing electronics errors caused by radiation from the RTG. Also, the mass distribution required for a spinning spacecraft demands a wider triangle.

Internally, the structure is painted black. This equalizes temperature by radiative heat transfer. Overall, the spacecraft is thoroughly blanketed to retain heat. Unlike the Pioneers and Voyagers, the radio dish is also enclosed in blankets which extend to the body. The heat from the RTG also adds warmth to the spacecraft in the outer Solar System. In the inner Solar System, the spacecraft must prevent overheating. Electronic activity is limited, power is diverted to shunts with attached radiators, and louvers are opened to radiate excess heat. Then, when the spacecraft is cruising inactively in the cold outer Solar System, the louvers are closed, and the shunt regulator reroutes power to electric heaters.

Propulsion and attitude control

New Horizons has both spin-stabilized (cruise) and three-axis stabilized (science) modes controlled entirely with hydrazine monopropellant. Additional post launch delta-v of over 290 m/s (1,000 km/h; 650 mph) is provided by a 77 kg (170 lb) internal tank. Helium is used as a pressurant, with an elastomeric diaphragm assisting expulsion. The spacecraft's on-orbit mass including fuel is over 470 kg (1,040 lb) on the Jupiter flyby trajectory, but would have been only 445 kg (981 lb) for the backup direct flight option to Pluto. Significantly, had the backup option been taken, this would have meant less fuel for later Kuiper belt operations.

There are 16 thrusters on New Horizons: four 4.4 N (1.0 lbf) and twelve 0.9 N (0.2 lbf) plumbed into redundant branches. The larger thrusters are used primarily for trajectory corrections, and the small ones (previously used on Cassini and the Voyager spacecraft) are used primarily for attitude control and spinup/spindown maneuvers. Two star cameras (from Galileo Avionica) are used for fine attitude control. They are mounted on the face of the spacecraft and provide attitude information while in spin-stabilized or 3-axis mode. Between star camera readings, knowledge is provided by dual redundant Miniature Inertial Measurement Unit (MIMU) from Honeywell. Each unit contains three solid-state gyroscopes and three accelerometers. Two Adcole Sun sensors provide attitude control. One detects angle to the Sun while the other measures spin rate and clocking.

Power

New Horizons' radioisotope thermoelectric generator (RTG) at the Kennedy Space Center's Payload Hazardous Servicing Facility

A cylindrical radioisotope thermoelectric generator (RTG), protrudes from one vertex in the plane of the triangle. The RTG will provide about 250 W, 30 V DC at launch, and is predicted to drop approximately 5% every 4 years, decaying to 200 W by the encounter with the Plutonian system in 2015. The RTG, model "GPHS-RTG," was originally a spare from the Cassini mission. The RTG contains 11 kg (24 lb) of plutonium-238 oxide pellets. Each pellet is clad in iridium, then encased in a graphite shell. It was developed by the U.S. Department of Energy at the Materials and Fuels Complex (formerly Argonne West), a part of the Idaho National Laboratory in Bingham County, near the town of Arco and the city of Idaho Falls. Less than the original design goal was produced because of delays at the United States Department of Energy, including security activities, that held up production. The mission parameters and observation sequence had to be modified for the reduced wattage; still, not all instruments can operate simultaneously. The Department of Energy transferred the space battery program from Ohio to Argonne in 2002 because of security concerns. There are no onboard batteries. RTG output is relatively predictable; load transients are handled by a capacitor bank and fast circuit breakers.

The amount of radioactive plutonium in the RTG is 10.9 kg (24 lb), about one-third the amount on board the Cassini–Huygens probe when it launched in 1997. That launch was protested by some people. The United States Department of Energy estimated the chances of a launch accident that would release radiation into the atmosphere at 1 in 350, and monitored the launch as it always does when RTGs are involved. It was believed that a worst-case scenario of total dispersal of on-board plutonium would spread the equivalent radiation of 80% the average annual dosage in North America from background radiation over an area with a radius of 105 km (65 mi).

Telecommunications and data handling

Communication with the spacecraft is via X band. The craft had a communication rate of 38 kbit/s at Jupiter; at Pluto's distance, a rate of approximately 1 kbit/s is expected. Besides the low bandwidth, Pluto's distance also causes a (one-way) latency of about 4.5 hours. The 70 m (230 ft) Deep Space Network (DSN) dishes are used to relay data beyond Jupiter. The spacecraft uses dual redundant transmitters and receivers, and either right- or left-hand circular polarization. The downlink signal is amplified by dual redundant 12-watt traveling-wave tube amplifiers (TWTAs) mounted on the body under the dish. The receivers are new, low-power designs. The system can be controlled to power both TWTAs at the same time, and transmit a dual-polarized downlink signal to the DSN that nearly doubles the downlink rate. DSN tests early in the mission with this dual polarization combining technique were successful, and the capability is now considered operational (when the spacecraft power budget permits both TWTAs to be powered).

Antennas of New Horizons (HGA, MGA and LGA)

In addition to the high-gain antenna, there are two low-gain antennas and a medium-gain dish. The high-gain dish has a Cassegrain layout, composite construction, and a 2.1-meter (7 ft) diameter (providing over 42 dBi of gain, and a half-power beam width of about a degree). The prime-focus, medium-gain antenna, with a 0.3-meter (1 ft) aperture and 10° half-power beamwidth, is mounted to the back of the high-gain antenna's secondary reflector. The forward low-gain antenna is stacked atop the feed of the medium-gain antenna. The aft low-gain antenna is mounted within the launch adapter at the rear of the spacecraft. This antenna was used only for early mission phases near Earth, just after launch and for emergencies if the spacecraft had lost attitude control.

New Horizons will record scientific instrument data to its solid-state buffer at each encounter, then transmit the data to Earth. Data storage is done on two low-power solid-state recorders (one primary, one backup) holding up to 8 gigabytes each. Because of the extreme distance from Pluto and the Kuiper belt, only one buffer load at those encounters can be saved. This is because New Horizons will have left the vicinity of Pluto (or future target object) by the time it takes to transmit the buffer load back to Earth.

Part of the reason for the delay between the gathering and transmission of data is because all of the New Horizons instrumentation is body-mounted. In order for the cameras to record data, the entire probe must turn, and the one-degree-wide beam of the high-gain antenna will almost certainly not be pointing toward Earth. Previous spacecraft, such as the Voyager program probes, had a rotatable instrumentation platform (a "scan platform") that could take measurements from virtually any angle without losing radio contact with Earth. New Horizons' elimination of excess mechanisms was implemented to save weight, shorten the schedule, and improve reliability to achieve a 15-year lifetime.

(The Voyager 2 spacecraft experienced platform jamming at Saturn; the demands of long time exposures at Uranus led to modifications of the mission such that the entire probe was rotated to achieve the time exposure photos at Uranus and Neptune, similar to how New Horizons will rotate.)

Flight computer

The spacecraft carries two computer systems, the Command and Data Handling system and the Guidance and Control processor. Each of the two systems is duplicated for redundancy, for a total of four computers. The processor used is the Mongoose-V, a 12 MHz radiation-hardened version of the MIPS R3000 CPU. Multiple clocks and timing routines are implemented in hardware and software to help prevent faults and downtime.

To conserve heat and mass, spacecraft and instrument electronics are housed together in IEMs (Integrated Electronics Modules). There are two redundant IEMs. Including other functions such as instrument and radio electronics, each IEM contains 9 boards.

On March 19, 2007 the Command and Data Handling computer experienced an uncorrectable memory error and rebooted itself, causing the spacecraft to go into safe mode. The craft fully recovered within two days, with some data loss on Jupiter's magnetotail. No impact on the subsequent mission is expected.

Mission science

New Horizons carries seven instruments: three optical instruments, two plasma instruments, a dust sensor and a radio science receiver/radiometer. The instruments are to be used to investigate the global geology, surface composition and temperature, and the atmospheric pressure, temperature and escape rate of Pluto and its moons. The total mass of the spacecraft is 31 kg (68 lb) and rated power is 21 watts (though not all instruments operate simultaneously). In addition, New Horizons has an Ultrastable Oscillator subsystem, which may be used to study and test the Pioneer Anomaly towards the end of the spacecraft's life.

Template:Spacecraft instruments tableTemplate:Spacecraft instruments tableTemplate:Spacecraft instruments tableTemplate:Spacecraft instruments tableTemplate:Spacecraft instruments tableTemplate:Spacecraft instruments tableTemplate:Spacecraft instruments table

Past mission timeline

Detailed New Horizons Mission Dates
Date	Event	Description	References
June 8, 2001	New Horizons selected by NASA.	After a three month concept study before submission of the proposal, two design teams were competing: POSSE (Pluto and Outer Solar System Explorer) and New Horizons.
June 13, 2005	Spacecraft departed Applied Physics Laboratory for final testing.	Spacecraft undergoes final testing at Goddard Space Flight Center (GSFC).
September 24, 2005	Spacecraft shipped to Cape Canaveral	It was moved through Andrews Air Force Base aboard a C-17 Globemaster III cargo aircraft.
December 17, 2005	Spacecraft ready for in rocket positioning	Transported from Hazardous Servicing Facility to Vertical Integration Facility at Space Launch Complex 41.
January 11, 2006	Primary launch window opened	The launch was delayed for further testing.
January 16, 2006	Rocket moved onto launch pad	Atlas V launcher, serial number AV-010, rolled out onto pad.
January 17, 2006	Launch delayed	First day launch attempts scrubbed because of unacceptable weather conditions (high winds).
January 18, 2006	Launch delayed again	Second launch attempt scrubbed because of morning power outage at the Applied Physics Laboratory.
January 19, 2006	Successful launch at 14:00 EST (19:00 UTC)	The spacecraft was successfully launched after brief delay due to cloud cover.
April 7, 2006	Passes Mars	The probe passed Mars: 1.7 AU from Earth.
June 13, 2006	Flyby of asteroid 132524 APL	The probe passed closest to the asteroid 132524 APL in the Belt at about 101,867 km at 04:05 UTC. Pictures were taken.
November 28, 2006	First image of Pluto	The image of Pluto was taken from a great distance.
January 10, 2007	Navigation exercise near Jupiter	Long-distance observations of Jupiter's outer moon Callirrhoe as a navigation exercise.
February 28, 2007	Jupiter flyby	Closest approach occurred at 05:43:40 UTC at 2.305 million km, 21.219 km/s.
June 8, 2008	Passing of Saturn's orbit	The probe passed Saturn's orbit: 9.5 AU from Earth.
December 29, 2009	The probe became closer to Pluto than to Earth	Pluto was then 32.7 AU from Earth, and the probe was 16.4 AU from Earth
February 25, 2010	Half mission distance reached	Half the travel distance of 2.38×109 kilometers (1,480,000,000 mi) was completed.
March 18, 2011	The probe passed Uranus's orbit	This is the fourth planetary orbit the spacecraft crossed since its start. New Horizons reached Uranus's orbit at 22:00 GMT.
December 2, 2011	New Horizons drew closer to Pluto than any other spacecraft has ever been.	Previously, Voyager 1 held the record for the closest approach. (~10.58 AU)
February 11, 2012	New Horizons was 10 AU from Pluto.	Happened at around 4:55 UTC.
July 1, 2013	New Horizons captures its first image of Charon	Charon is clearly separated from Pluto using the Long Range Reconnaissance Imager (LORRI).
October 25, 2013	New Horizons was 5 AU from Pluto.
July 20, 2014	Photos of Pluto and Charon	Images obtained showing both bodies orbiting each other, distance 2.8 AU.
August 25, 2014	The probe passed Neptune's orbit	This was the fifth planetary orbit crossed.
December 7, 2014	New Horizons awoke from hibernation.	NASA's Deep Sky Network station at Tidbinbilla, Australia received a signal confirming that it successfully awoke from hibernation.
Jan 2015	Observation of Kuiper belt object VNH0004	Distant observations from a distance of roughly 75 million km (~0.5 AU)
January 15, 2015	New Horizons begins observing the Pluto system
Feb 2015	Observations of Pluto begin	New Horizons is now close enough to Pluto for the main science mission to begin.
March 10–11 2015	New Horizons was 1 AU from Pluto.
May 5, 2015	Better than Hubble	Images exceed best Hubble Space Telescope resolution.
July 14, 2015	Flyby of Pluto, Charon, Hydra, Nix, Kerberos and Styx	Flyby of Pluto around 11:47 UTC at 13,695 km, 13.78 km/s. Pluto is 32.9 AU from Sun. Flyby of Charon around 12:01 UTC at 29,473 km, 13.87 km/s.
2016–20	Possible flyby of one or more Kuiper belt objects (KBOs)	The probe will perform flybys of other KBOs, if any are in the spacecraft's trajectory.
January 2019	Possible flyby of 1110113Y	1110113Y is currently the most possible known target in the Kuiper belt.
2026	Expected end of the mission
2038	New Horizons will be 100 AU from the Sun.	If still functioning, the probe will explore the outer heliosphere.

Launch

The Atlas V rocket carrying New Horizons lifts off from Cape Canaveral. The launch was the fastest ever to date, at 16.26km/s.

On September 24, 2005 the spacecraft arrived at the Kennedy Space Center on board a C-17 Globemaster III for launch preparations. The launch of New Horizons was originally scheduled for January 11, 2006, but was initially delayed until January 17, 2006 to allow for borescope inspections of the Atlas V's kerosene tank. Further delays related to low cloud ceiling conditions downrange, and high winds and technical difficulties—unrelated to the rocket itself—prevented launch for a further two days. Although there were backup launch opportunities in February 2006 and February 2007, only the first twenty-three days of the 2006 window permitted the Jupiter fly-by. Any launch outside that period would have forced the spacecraft to fly a slower trajectory directly to Pluto, delaying its encounter by 2–4 years. The probe finally lifted off from Pad 41 at Cape Canaveral Air Force Station, Florida, directly south of Space Shuttle Launch Complex 39, at 14:00 EST on Jan 19, 2006.

The Centaur second stage reignited at 14:30 EST (19:30 UTC), followed by the ATK Star 48B third stage, successfully sending the probe on a solar-escape trajectory. New Horizons took only nine hours to reach the Moon's orbit, passing lunar orbit before midnight EST that day.

The probe was launched by a Lockheed Martin Atlas V 551 rocket, with a third stage added to increase the heliocentric (escape) speed. This was the first launch of the Atlas V 551 configuration, which uses five solid rocket boosters, and the first Atlas V with a third stage. Previous flights had used none, two, or three solid boosters, but never five. The vehicle, AV-010, weighed 570,000 kg (1.26 million lb) at lift-off, and had earlier been slightly damaged when Hurricane Wilma swept across Florida on October 24, 2005. One of the solid rocket boosters was hit by a door. The booster was replaced with an identical unit, rather than inspecting and requalifying the original.

New Horizons is often given the title of Fastest Spacecraft Ever Launched, and left Earth faster than any other spacecraft to date. It is also the first spacecraft launched directly into a solar escape trajectory, which requires an approximate speed of 16.5 km/s (59,000 km/h; 37,000 mph), plus losses, all to be provided by the launcher. But it is not the fastest spacecraft to leave the Solar System. This record is held by Voyager 1, currently travelling at 17.145 km/s (61,720 km/h; 38,350 mph) relative to the Sun. Voyager 1 attained greater hyperbolic excess velocity from Jupiter and Saturn gravitational slingshots than New Horizons. Other spacecraft, such as the Helios probes, can also be measured as the fastest objects, due to their orbital speed relative to the Sun at perihelion. Because they remain in solar orbit, their specific orbital energy relative to the Sun is lower than New Horizons and other artificial objects escaping the Solar System.

The Star 48B third-stage is also on a hyperbolic Solar System escape trajectory, and reached Jupiter before the New Horizons spacecraft. Since it is not in controlled flight, it did not receive the correct gravity assist, and will only pass within 200 million km (120 million mi) of Pluto. The Centaur stage did not achieve solar escape velocity, and is in heliocentric orbit.

The launch was dedicated to the memory of launch conductor Daniel Sarokon, who was described by space program officials as one of the most influential people in the history of space travel.

• 
  The Atlas V 551 rocket, used to launch New Horizons, being processed a month before launch.
• 
  View of Cape Canaveral Launch Complex 41, with the Atlas V carrying New Horizons on the pad.
• Distant view of Cape Canaveral during the launch of New Horizons on January 19, 2006.
  Distant view of Cape Canaveral during the launch of New Horizons on January 19, 2006.
• NASA TV footage of New Horizons' launch from Cape Canaveral. (4:00)

Trajectory corrections and 132524 APL

Double image of the 2.5 km (1.6 mi) diameter asteroid 132524 APL, photographed by New Horizons at two different distances

On January 28 and 30, 2006, mission controllers guided the probe through its first trajectory correction maneuver (TCM), which was divided into two parts (TCM-1A and TCM-1B). The total velocity change of these two corrections was about 18 meters per second (65 km/h; 40 mph). TCM-1 was accurate enough to permit the cancellation of TCM-2, the second of three originally scheduled corrections.

During the week of February 20, 2006, controllers conducted initial in-flight tests of three onboard science instruments, the Alice ultraviolet imaging spectrometer, the PEPSSI plasma-sensor, and the LORRI long-range visible-spectrum camera. No scientific measurements or images were taken, but instrument electronics, and in the case of Alice, some electromechanical systems were shown to be functioning correctly.

On March 9, 2006 at 17:00 UTC, controllers performed TCM-3, the last of three scheduled course corrections. The engines burned for 76 seconds, adjusting the spacecraft's velocity by about 1.16 m/s (4.2 km/h; 2.6 mph).

On April 7, 2006 at 10:00 UTC, the spacecraft passed the orbit of Mars, moving at roughly 21 km/s (76,000 km/h; 47,000 mph) away from the Sun at a solar distance of 243 million kilometers.

Because of the need to conserve fuel for possible encounters with Kuiper belt objects subsequent to the Pluto flyby, intentional encounters with objects in the asteroid belt were not planned. After launch, the New Horizons team scanned the spacecraft's trajectory to determine if any asteroids would, by chance, be close enough for observation. In May 2006 it was discovered that New Horizons would pass close to the tiny asteroid 132524 APL on June 13, 2006. Closest approach occurred at 4:05 UTC at a distance of 101,867 km (63,297 mi). The asteroid was imaged by Ralph (use of LORRI was not possible due to proximity to Sun), which gave the team a chance to exercise Ralph's capabilities, and make observations of the asteroid's composition as well as light and phase curves. The asteroid was estimated to be 2.5 km (1.6 mi) in diameter. The spacecraft successfully tracked the asteroid over June 10–12, 2006. This allowed the mission team to test the spacecraft's ability to track rapidly moving objects. Images were obtained through the Ralph telescope. On September 25, 2007 at 16:04 EDT, the engines were fired for 15 minutes and 37 seconds, changing the spacecraft's velocity by 2.37 m/s (8.5 km/h; 5.3 mph). On June 30, 2010 on 7:49 EDT, mission controllers executed a fourth TCM on New Horizons that lasted 35.6 seconds.

Jupiter encounter

Main article: Exploration of Jupiter

An infrared image of Jupiter's southern atmosphere (New Horizons; LEISA).

New Horizons used LORRI to take its first photographs of Jupiter on September 4, 2006 from a distance of 291 million kilometers (181 million miles). More detailed exploration of the system began in January 2007 with an infrared image of the moon Callisto as well as several black and white images of the planet itself. New Horizons received a Jupiter gravity assist with a closest approach at 05:43:40 UTC on February 28, 2007 when it was 2.3 million kilometers (1.4 million miles) from the planet. The flyby increased New Horizons' speed by 4 km/s (14,000 km/h; 9,000 mph) accelerating the probe 23 km/s (83,000 km/h; 51,000 mph) relative to the Sun and shortening its voyage to Pluto by three years.

The flyby was the center of a 4-month intensive observation campaign lasting from January to June. Being an ever-changing scientific target, Jupiter was observed intermittently since the end of the Galileo mission. Knowledge about the planet benefited from the fact that New Horizons instruments were built using the latest technology, especially in the area of cameras, representing a significant improvement over Galileo's cameras, which were evolved versions of Voyager cameras which, in turn, were evolved Mariner cameras. The Jupiter encounter also served as a shakedown and dress rehearsal for the Pluto encounter. Because of the much shorter distance from Jupiter to Earth, the communications link can transmit multiple loadings of the memory buffer; thus the mission actually returned more data from the Jovian system than it is expected to transmit from Pluto.

One of the main goals during the Jupiter encounter was observing the planet's atmospheric conditions and analyzing the structure and composition of its clouds. Heat induced lightning strikes in the polar regions and "waves" that indicate violent storm activity were observed and measured. The Little Red Spot, spanning up to 70% of Earth's diameter, was imaged from up close for the first time.

Observing from different angles and illumination conditions New Horizons took detailed images of Jupiter's faint ring system discovering debris left over from recent collisions within the rings or from some other unexplained phenomena. The search for undiscovered moons within the rings showed no results. Travelling through the planet's magnetosphere New Horizons collected valuable particle readings. "Bubbles" of plasma which are believed to be formed from material ejected by the moon Io were noticed in the magnetotail.

• 
  A LORRI image of Jupiter, taken on January 8, 2007, while the probe was 81 million kilometers from the planet and one month away from closest approach.
• 
  A composite image of Jupiter and Io, taken on on February 28 and March 1, 2007 respectively. Jupiter is shown in infrared, while Io is shown in true-color.
• 
  LORRI images of Jupiter's rings. The top image was taken on approach to Jupiter, while the bottom image was taken on departure, illuminated by the Sun.
• 
  A composite false-color image of Oval BA, otherwise known as the "Little Red Spot", using New Horizons' LORRI and the Hubble Space Telescope's WFPC2.
• 
  An MVIC image of Jupiter's equatorial atmosphere, showing Buoyancy waves which travel at 100m/s faster than surrounding clouds.

Jovian moons

Main article: Moons of Jupiter

The major (Galilean) moons were in poor position; the aim of the gravity-assist maneuver meant the spacecraft passed millions of kilometers from any of the Galilean moons. Still, the New Horizons instruments were intended for small, dim targets, so they were scientifically useful on large, distant moons. Emphasis was put on Io, whose active volcanoes shoot out tons of material into the planetary magnetosphere, and further. Out of 11 observed eruptions, three were seen for the first time while that of the volcano Tvashtar rose up to an altitude of 330 kilometers. The event gave scientists an unprecedented look into the structure and motion of the rising plume and its subsequent fall back to the surface. Infrared signatures of a further 36 volcanoes were noticed. Callisto's surface was analyzed with LEISA, revealing how lighting and viewing conditions affect infrared spectrum readings of its surface water ice. Minor moons such as Amalthea had their orbit solutions refined. The cameras determined their position, acting as "reverse optical navigation".

• 
  New Horizons view of Io. The Tvashtar volcano, which can be seen in the top of the image, had erupted during the spacecraft's flyby.
• 
  A LORRI image of Io, taken while New Horizons passed behind the moon's penumbra. Volcanic plumes, lava and aurora are all visible in this image.
• 
  New Horizons view of Europa. One of the goals of New Horizons at Europa was to examine "nature of the icy crust and the forces that have deformed it".
• 
  New Horizons view of Ganymede.
• 
  New Horizons view of Callisto. The moon was used by the New Horizons team to practice detecting water ice, in preparation for similar experiments at Charon.

Transit (Jupiter to Pluto)

The first images of Pluto from New Horizons were acquired September 21–24, 2006, during a test of the LORRI. They were released on November 28, 2006. The images, taken from a distance of approximately 4,200,000,000 km (2.6×10⁹ mi), confirmed the spacecraft's ability to track distant targets, critical for maneuvering toward Pluto and other Kuiper belt objects.

• 
  September 2006: New Horizons takes first images of Pluto.

After passing Jupiter, New Horizons spent most of its journey towards Pluto in hibernation mode: redundant components as well as guidance and control systems were shut down to extend their life cycle, decrease operation costs and free the Deep Space Network for other missions. During hibernation mode, the onboard computer monitored the probe's systems and transmitted a signal back to Earth: a "green" code if everything was functioning as expected or a "red" code if the mission control's assistance were needed. The probe was activated for about two months a year so that the instruments could be calibrated and the systems checked. The first hibernation mode cycle started on June 28, 2007, the second cycle began on December 16, 2008, the third cycle on August 27, 2009, and the fourth cycle on August 29, 2014 after a 10 week test.

New Horizons crossed the orbit of Saturn on June 8, 2008, and Uranus on March 18, 2011. After astronomers announced the discovery of two new moons in the Pluto system, Kerberos and Styx, mission planners started contemplating the possibility of the probe running into unseen debris and dust left over from earlier collisions with the moons. A study based on 18 months of computer simulations, Earth-based telescope observations and occultations of the Pluto system revealed that the possibility of a catastrophic collision with debris or dust is less than 0.3% on the probe's scheduled course. If the hazard increases, New Horizons will use one of two possible contingency plans, the so-called SHBOTs (Safe Haven by Other Trajectories): the probe could continue on its present trajectory with the antenna facing the incoming particles so the more vital systems would be protected, or, it could position its antenna and make a course correction that would take it just 3000 km from the surface of Pluto where it is expected that the atmospheric drag would clean the surrounding space of possible debris.

While in hibernation mode in July 2012, New Horizons started gathering scientific data with SWAP, PEPSSI and SDC. Although it was originally planned to activate just SDC, other instruments were powered on the initiative of principal investigator Alan Stern who believed they could use the opportunity to collect valuable heliospheric data. Before activating the other two instruments, ground tests were conducted to make sure that the expanded data gathering in this phase of the mission would not limit available energy, memory and fuel in the future and that all systems are functioning during the flyby. The first set of data was transmitted in January 2013 during a three week activation from hibernation. A new command and data handling software was also uploaded to address the problem of computer resets.

Images from July 1 to 3, 2013 by LORRI were the first by the probe to resolve Pluto and Charon as separate objects.

On July 14, 2014, mission controllers performed a sixth trajectory correction maneuver (TCM) since its launch to enable the craft to reach Pluto.

Between July 19–24, 2014, New Horizons' LORRI snapped 12 images of Charon revolving around Pluto, covering almost one full rotation at distances ranging from about 429,000,000 km (267,000,000 mi) to 422,000,000 km (262,000,000 mi).

• 
  July 2014: New Horizons takes images of Pluto and its largest moon, Charon.

In August 2014, astronomers made high-precision measurements of Pluto's location and orbit around the Sun using the Atacama Large Millimeter/submillimeter Array (ALMA) to help NASA's New Horizons spacecraft accurately hone in on Pluto.

• 
  August 2014: The ALMA observes Pluto and Charon.

On December 6, 2014, mission controllers sent a signal for the craft to "wake up" from its final Pluto-approach hibernation and begin regular operations. The craft's response that, it was "awake", arrived to Earth at 9:30 PM EST.

Pluto encounter

Distance-encounter operations at Pluto began on January 4, 2015. At this date images of the targets with the onboard LORRI imager plus Ralph telescope would only be a few pixels in width. Investigators have begun taking Pluto and background starfield images to assist mission navigators in the design of course-correcting engine maneuvers that precisely modifiy the trajectory of New Horizons to aim the approach.

On January 15, 2015, NASA gave a brief update of the timeline of the approach and departure phases.

• 
  January 2015: NASA updates New Horizons timeline.

On February 12, 2015, NASA released new images of Pluto (taken from January 25 to 31) from the approaching probe. New Horizons was more than 203,000,000 km (126,000,000 mi) away from Pluto when it began taking the photos, which showed Pluto and its largest moon, Charon. The exposure time was too short to see Pluto's smaller, much fainter moons.

• 
  January 2015: New Horizons takes images of Pluto and its largest moon, Charon.

Investigators compiled a series of images of the moons Nix and Hydra taken from January 27 through February 8, 2015, beginning at a range of 201,000,000 km (125,000,000 mi). Pluto and Charon appear as a single overexposed object at the center. The right side image has been processed to remove the background starfield.

• 
  January and February 2015: New Horizons takes images of Pluto, Charon, Nix, and Hydra.

Also in regards to this approach phase during January 2015, on August 21, 2012, the team had announced that they would also spend mission time attempting long-range observations of the Kuiper belt object, temporarily designated VNH0004, when the object was at a distance from New Horizons of 75 gigameters (0.50 AU). The object would be too distant to resolve surface features or take spectroscopy, but it would be able to make observations that cannot be made from Earth, namely a phase curve and a search for small moons. A second object will be observed in June, and a third in September, after the flyby; the team hopes to observe a dozen such objects through 2018.

Current status

New Horizons' path as of March 3, 2015 (see today's position).

The latest news and photos from the probe can be viewed at NASA's Web site.

As of March 10, 2015, 14:00:00 UTC New Horizons was about:

• 1.00 AU (150,000,000 km; 93,000,000 mi) from Pluto
• 31.86 AU (4.766×10⁹ km; 2.962×10⁹ mi) from the Sun
• 32.28 AU (4.829×10⁹ km; 3.001×10⁹ mi) from Earth.

The spacecraft traveled at 14.59 km/s (32,600 mph) or about 3.0 AU per year (relative to the Sun). Radio signals take four and a half hours to travel to the spacecraft from Earth.

The brightness of the Sun from the spacecraft is magnitude −19.3. New Horizons is heading in the direction of the constellation Sagittarius.

Future mission timeline

Pluto flyby

New Horizons approaching Pluto and Charon (artist concept).

Computer-generated simulation of what the view from the spacecraft might look like during the flyby of Pluto (right) also showing its moon, Charon (left)

On May 5, 2015, New Horizons' imaging resolution of Pluto will exceed that of the Hubble's, lasting until two weeks after the flyby. From the May date forward on approach the probe should be able to detect any rings or any additional moons (eventually down to 2 km diameter), for avoidance and targeting maneuvers, and observation scheduling. New Horizons' best spatial resolution of the small satellites is: 460m/pixel at Nix, 1.1 km/pixel at Hydra, 3.2 km/pixel at Kerberos, and 3.2 km/pixel at Styx. Estimates for the sizes of these bodies (assuming albedo 0.35) are Hydra 60 km, Nix 45 km, Kerberos 13 km, Styx 10 km. This translates to ~55, ~95, ~4, and ~3 pixels in width for Hydra, Nix, Kerberos, and Styx, respectively.

New Horizons is intended to pass within 10,000 km (6,200 mi) of Pluto, with this closest approach date estimated to occur on July 14, 2015 at 11:50 UTC. New Horizons will have a relative velocity of 13.78 km/s (49,600 km/h; 30,800 mph) at its closest approach, and will come as close as 27,000 km (17,000 mi) to Charon, although these parameters may be changed during flight. Long-range imaging will include 40 km (25 mi) mapping of Pluto and Charon 3.2 days out. This is half the rotation period of Pluto–Charon and will allow imaging of the side of both bodies that will be facing away from the spacecraft at closest approach. Coverage will repeat twice per day, to search for changes due to snows or cryovolcanism. Still, due to Pluto's tilt and rotation, a portion of the northern hemisphere will be in shadow at all times. During the flyby, LORRI should be able to obtain select images with resolution as high as 50 m/px (if closest distance is around 10,000 km), and MVIC should obtain 4-color global dayside maps at 1.6 km resolution. LORRI and MVIC will attempt to overlap their respective coverage areas to form stereo pairs. LEISA will obtain hyperspectral near-infrared maps at 7 km/px globally and 0.6 km/pixel for selected areas.

Meanwhile, Alice will characterize the atmosphere, both by emissions of atmospheric molecules (airglow), and by dimming of background stars as they pass behind Pluto (occultation). During and after closest approach, SWAP and PEPSSI will sample the high atmosphere and its effects on the solar wind. VBSDC will search for dust, inferring meteoroid collision rates and any invisible rings. REX will perform active and passive radio science. Ground stations on Earth will transmit a powerful radio signal as New Horizons passes behind Pluto's disk, then emerges on the other side. The communications dish will measure the disappearance and reappearance of the radio occultation signal. The results will resolve Pluto's diameter (by their timing) and atmospheric density and composition (by their weakening and strengthening pattern). (Alice can perform similar occultations, using sunlight instead of radio beacons.) Previous missions had the spacecraft transmit through the atmosphere, to Earth ("downlink"). Low power and extreme distance means New Horizons will be the first such "uplink" mission. Pluto's mass and mass distribution will be evaluated by their tug on the spacecraft. As the spacecraft speeds up and slows down, the radio signal will experience a Doppler shift. The Doppler shift will be measured by comparison with the ultrastable oscillator in the communications electronics.

Reflected sunlight from Charon will allow some imaging observations of the nightside. Backlighting by the Sun will highlight any rings or atmospheric hazes. REX will perform radiometry of the nightside.

Initial, highly-compressed images will be transmitted within days. The science team will select the best images for public release. Uncompressed images will take about nine months to transmit, depending on Deep Space Network traffic. It may turn out that fewer months will be needed. The spacecraft link is proving stronger than expected, and it is possible that both downlink channels may be ganged together to nearly double the data rate.

Primary objectives (required)

• Characterize the global geology and morphology of Pluto and Charon
• Map chemical compositions of Pluto and Charon surfaces
• Characterize the neutral (non-ionized) atmosphere of Pluto and its escape rate

Loss of any of these objectives will constitute a partial failure of the mission.

Secondary objectives (expected)

• Characterize the time variability of Pluto's surface and atmosphere
• Image select Pluto and Charon areas in stereo
• Map the terminators (day/night border) of Pluto and Charon with high resolution
• Map the chemical compositions of select Pluto and Charon areas with high resolution
• Characterize Pluto's ionosphere (upper layer of the atmosphere), and its interaction with the solar wind
• Search for neutral species such as H₂, hydrocarbons, HCN and other nitriles in the atmosphere
• Search for any Charon atmosphere
• Determine bolometric Bond albedos for Pluto and Charon
• Map surface temperatures of Pluto and Charon
• Map any additional surfaces of outer most moons; Nix, Hydra, Kerberos & Styx.

It is expected, but not demanded, that most of these objectives will be met.

Tertiary objectives (desired)

• Characterize the energetic particle environment at Pluto and Charon
• Refine bulk parameters (radii, masses) and orbits of Pluto and Charon
• Search for additional moons, and any rings

These objectives may be attempted, though they may be skipped in favor of the above objectives. An objective to measure any magnetic field of Pluto was dropped. A magnetometer instrument could not be implemented within a reasonable mass budget and schedule, and SWAP and PEPSSI could do an indirect job detecting some magnetic field around Pluto.

Kuiper belt object mission

A comparison of Pluto's orbit, the Kuiper belt, and the presumed distance of the Oort cloud compared to the rest of the Solar System

Kuiper belt object – possible target of New Horizons spacecraft (artist's concept).

Target background

After passing by Pluto, New Horizons will continue farther into the Kuiper belt. The goal is to study one or two other Kuiper belt objects. Because maneuvering capability is limited, this phase of the mission is contingent on the presence of suitable KBOs close to New Horizons' flight path (which ruled out any possibility for a flyby of Eris, a trans-Neptunian object comparable in size to Pluto.). Because the flight path is determined by the Pluto flyby, with only minimal hydrazine remaining, objects needed to be found within a cone, extending from Pluto, of less than a degree's width, within 55 AU. Past 55 AU, the communications link will become too weak, and the RTG wattage will have decayed significantly enough to hinder observations. Desirable KBOs will be well over 50 km (31 mi) in diameter, neutral in color (to compare with the reddish Pluto), and, if possible, possess a moon. Because the population of KBOs appears quite large, multiple objects may qualify. Mission planners searched for one or more additional Kuiper belt objects (KBOs) of the order of 50–100 km (31–62 mi) in diameter as targets for flybys similar to the spacecraft's Plutonian encounter. The available region, being fairly close to the plane of the Milky Way and thus difficult to survey for dim objects, is one that was not well-covered by previous KBO search efforts.

Search

In 2011 a dedicated search for suitable KBOs using ground telescopes was started. Large ground telescopes with wide-field cameras, notably the twin 6.5-meter Magellan Telescopes in Chile, the 8.2-meter Subaru Observatory in Hawaii, and the Canada-France-Hawaii Telescope were used to search for potential targets. Through the citizen science project, the public helped to scan telescopic images for possible suitable mission candidates by participating in the Ice Hunters project. The ground-based search resulted in the discovery of about 143 KBOs of potential interest, but none of these were close enough to the flight path of New Horizons. Only the Hubble Space Telescope was deemed likely to find a suitable target in time for a successful KBO mission. On June 16, 2014, time on Hubble was granted. Hubble has a much greater ability to find suitable KBOs than ground telescopes. The probability that a target for New Horizons would be found was estimated beforehand at about 95%.

Suitable KBOs

Hubble Space Telescope images of 1110113Y, a potential target for New Horizons during its Kuiper belt mission.

On October 15, 2014, it was revealed that Hubble's search had uncovered three potential targets, provisionally designated PT1, PT2 and PT3 by the New Horizons team. All are objects with estimated diameters in the 30–55 km range, too small to be sighted by ground telescopes, at distances from the Sun of 43–44 AU, which would put the encounters in the 2018–2019 period. The initial estimated probabilities that these objects are reachable within New Horizons' fuel budget are 100%, 97% and 7%, respectively. All are members of the "cold" (low-inclination, low-eccentricity) classical Kuiper belt, and thus very different from Pluto. PT1 (designated 1110113Y on the HST web site), the most favorably situated object, is magnitude 26.8, 30–45 km in diameter, and would be encountered around January 2019. A course to reach it would require about 35% of New Horizons' available trajectory-adjustment fuel supply. A mission to PT2 or PT3 may be preferable, as they are brighter and therefore probably larger than PT1.

Possible Neptune trojan objectives

Lagrange points in the Sun-Earth system (not to scale)

Other possible targets were Neptune trojans. The probe's trajectory to Pluto passed near Neptune's trailing Lagrange point ("L₅"), which may host hundreds of bodies in 1:1 resonance. In late 2013, New Horizons passed within 1.2 AU (180,000,000 km; 110,000,000 mi) of the high-inclination L5 Neptune trojan 2011 HM102, which was identified shortly before by the New Horizons KBO Search Survey team while searching for more distant objects for New Horizons to fly by after its 2015 Pluto encounter. At that range, 2011 HM₁₀₂ would have been bright enough to be detectable by New Horizons' LORRI instrument. The 2011 HM₁₀₂ flyby came shortly before the Pluto encounter. At that time, New Horizons may not have had significant downlink bandwidth, and thus free memory, for trojan encounter data. The New Horizons team eventually decided that they would not target 2011 HM₁₀₂ for observations because the preparations for the Pluto approach took precedence.

Post KBO mission - the heliosphere and science conclusion

Provided it survives that far out, New Horizons is likely to follow the Voyager probes in exploring the outer heliosphere and mapping the heliosheath and heliopause. The heliopause might be reached around year 2047.

Even though it was launched far faster than any outward probe before it, New Horizons will never overtake either Voyager 1 or Voyager 2, as the most distant human-made object from Earth. Close fly-bys of Saturn and Titan gave Voyager 1 an advantage with its extra gravity assist. When New Horizons reaches the distance of 100 AU, it will be travelling at about 13 km/s (29,000 mph), around 4 km/s (8,900 mph) slower than Voyager 1 at that distance.

A public-defined mission not proposed by the New Horizons team

In August 2013, it was proposed to use the radio-tracking data from New Horizons to discover constraints on the position of a hypothesized trans-Neptunian planetary-sized body.

See also

• List of artificial objects escaping from the Solar System
• List of spaceflights (2006)
• New Horizons 2 – a proposed twin of New Horizons
• Pioneer 10
• Pioneer 11
• Robotic spacecraft
• Space exploration
• Timeline of Solar System exploration
• Voyager 1
• Voyager 2

Further reading

Guo, Y.; Farquhar, R. W. (2005). "New Horizons Pluto–Kuiper Belt mission: design and simulation of the Pluto–Charon encounter" (PDF). Acta Astronautica. 56 (3): 421–429. doi:10.1016/j.actaastro.2004.05.076.

External links

Official websites

• Official New Horizons mission website
• Where is New Horizons now?
• New Horizons (PKB) Profile at NASA's Solar System Exploration web site
• NSSDC page

Citizen Science

• Ice Hunters – a citizen science project searching for Kuiper belt objects that could be visited by New Horizons
• Deep Space Network @ Home a proposal that could increase the data return beyond Pluto–Charon.
• New Horizons animation of visit through Jupiter's magnetic field
• New Horizons launch APOD
• Student-Built Dust Detector Renamed Venetia, Honoring Girl Who Named Ninth Planet

Press Coverage

• The New Horizons spacecraft – Spaceflight Now, January 8, 2006 (from the NASA mission press kit)
• The New Horizons Spacecraft, Glen H. Fountain et al.
• How the mission got its name
• Johns Hopkins Magazine – Mission: Pluto
• New Horizons Set To Launch With Minimum Amount of Plutonium
• NASA's New Horizons mission also a new horizon for INL
• NASA's New Horizons spacecraft in the clean room, November 4, 2005

Other

• Unofficial "Where is New Horizons Now?"
• Keep tracking New Horizons on your Dashboard (Mac OS X Tiger)
• CollectSpace article on the trinkets placed aboard New Horizons
• Hi, I am Alan Stern, head of NASA's New Horizons spacecraft on its way to Pluto... "Ask Me Anything" session on the 'Reddit' website with New Horizons project leader Alan Stern and five others, October 6, 2014.