User:Famousdog/Human factors and ergonomics
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/bf/Human_fatigue_study.jpg/220px-Human_fatigue_study.jpg)
Human factors or Ergonomics (HF&E) is a multidisciplinary field incorporating contributions from psychology, engineering, industrial design, graphic design, statistics, operations research and anthropometry. In essence it is the study of designing equipment and devices that fit the human body and its cognitive abilities. The two terms "human factors" and "ergonomics" are essentially synonomous.[1][2]
The International Ergonomics Association defines ergonomics or human factors as follows:[2]
Ergonomics (or human factors) is the scientific discipline concerned with the understanding of interactions among humans and other elements of a system, and the profession that applies theory, principles, data and methods to design in order to optimize human well-being and overall system performance.
HF&E is employed to fulfill the goals of health and safety and productivity. It is relevant in the design of such things as safe furniture and easy-to-use interfaces to machines and equipment. Proper ergonomic design is necessary to prevent repetitive strain injuries, which can develop over time and can lead to long-term disability.
Human factors and ergonomics is concerned with the ‘fit’ between the user, equipment and their environments. It takes account of the user's capabilities and limitations in seeking to ensure that tasks, functions, information and the environment suit each user.
To assess the fit between a person and the used technology, human factors specialists or ergonomists consider the job (activity) being done and the demands on the user; the equipment used (its size, shape, and how appropriate it is for the task), and the information used (how it is presented, accessed, and changed). Ergonomics draws on many disciplines in its study of humans and their environments, including anthropometry, biomechanics, mechanical engineering, industrial engineering, industrial design, information design, kinesiology, physiology and psychology.
Etymology
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/35/Computer_Workstation_Variables.jpg/240px-Computer_Workstation_Variables.jpg)
The term ergonomics, from Greek Έργον 'work' and Νόμος 'natural laws', first entered the modern lexicon when Wojciech Jastrzębowski used the word in his 1857 article Rys ergonomji czyli nauki o pracy, opartej na prawdach poczerpniętych z Nauki Przyrody (The Outline of Ergonomics, i.e. Science of Work, Based on the Truths Taken from the Natural Science).[3] The introduction of the term to the English lexicon is widely attributed to British psychologist Hywel Murrell, at the 1949 meeting at the UK's Admiralty, which led to the foundation of The Ergonomics Society. He used it to encompass the studies in which he had been engaged during and after the World War II.[4]
The expression human factors is a North American term which has been adopted to emphasise the application of the same methods to non work-related situations. A "human factor" is a physical or cognitive property of an individual or social behavior specific to humans that may influence the functioning of technological systems. The terms "human factors" and "ergonomics" are essentially synonomous.[1]
History of the field
[edit]The foundations of the science of ergonomics appear to have been laid within the context of the culture of Ancient Greece. A good deal of evidence indicates that Greek civilization in the 5th century BC used ergonomic principles in the design of their tools, jobs, and workplaces. One outstanding example of this can be found in the description Hippocrates gave of how a surgeon's workplace should be designed and how the tools he uses should be arranged.[5] The archaeological record also shows that the early Egyptian dynasties made tools and household equipment that illustrated ergonomic principles. It is therefore questionable whether the claim by Marmaras, et al., regarding the origin of ergonomics, can be justified[6]
In the 19th century, Frederick Winslow Taylor pioneered the "scientific management" method, which proposed a way to find the optimum method of carrying out a given task. Taylor found that he could, for example, triple the amount of coal that workers were shoveling by incrementally reducing the size and weight of coal shovels until the fastest shoveling rate was reached.[7] Frank and Lillian Gilbreth expanded Taylor's methods in the early 1900s to develop the "time and motion study". They aimed to improve efficiency by eliminating unnecessary steps and actions. By applying this approach, the Gilbreths reduced the number of motions in bricklaying from 18 to 4.5, allowing bricklayers to increase their productivity from 120 to 350 bricks per hour.[7]
Previous to World War I the focus of aviation psychology was on the aviator himself, but the war shifted the focus onto the aircraft, in particular, the design of controls and displays, the effects of altitude and environmental factors on the pilot. The war saw the emergence of aeromedical research and the need for testing and measurement methods. Studies on driver behaviour started gaining momentum during this period, as Henry Ford started providing millions of Americans with automobiles. Another major development during this period was the performance of aeromedical research. By the end of WWI, two aeronautical labs were established, one at Brooks Airforce Base, Texas and the other at Wright field outside of Dayton, Ohio. Many tests were conducted to determine which characteristic differentiated the successful pilots from the unsuccessful ones. During the early 1930s, Edwin Link developed the first flight simulator. The trend continued and more sophisticated simulators and test equipment were developed. Another significant development was in the civilian sector, where the effects of illumination on worker productivity were examined. This led to the identification of the Hawthorne Effect, which suggested that motivational factors could significantly influence human performance.[7]
World War II marked the development of new and complex machines and weaponry, and these made new demands on operators' cognition. it was no longer possible to adopt the Tayloristic principle of matching individuals to preexisting jobs. Now the design of equipment had to take into account human limitations and take advantage of human capabilities. The decision-making, attention, situational awareness and hand-eye coordination of the machine's operator became key in the success or failure of a task. There was a lot of research conducted to determine the human capabilities and limitations that had to be accomplished. A lot of this research took off where the aeromedical research between the wars had left off. An example of this is the study done by Fitts and Jones (1947), who studied the most effective configuration of control knobs to be used in aircraft cockpits. A lot of this research transcended into other equipment with the aim of making the controls and displays easier for the operators to use. The entry of the terms "human factors" and "ergonomics" into the modern lexicon date from this period. It was observed that fully functional aircraft, flown by the best-trained pilots, still crashed. In 1943, Alphonse Chapanis, a lieutenant in the U.S. Army, showed that this so-called "pilot error" could be greatly reduced when more logical and differentiable controls replaced confusing designs in airplane cockpits. After the war, the Army Air Force published 19 volumes summarizing what had been established from research during the war.[7]
In the decades since WWII, HF&E has continued to flourish and diversify. Work by Elias Porter and others within the RAND Corporation after WWII extended the conception of HF&E. "As the thinking progressed, a new concept developed - that it was possible to view an organization such as an air-defense, man-machine system as a single organism and that it was possible to study the behavior of such an organism. It was the climate for a breakthrough."[8] In the initial 20 years after the WWII, most activities were done by the "founding fathers": Alphonse Chapanis, Paul Fitts, and Small.[citation needed]
The beginning of The Cold War led to a major expansion of Defense supported research laboratories. Also, a lot of labs established during WWII started expanding. Most of the research following the war was military-sponsored. Large sums of money were granted to universities to conduct research. The scope of the research also broadened from small equipments to entire workstations and systems. Concurrently, a lot of opportunities started opening up in the civilian industry. The focus shifted from research to participation through advice to engineers in the design of equipment. After 1965, the period saw a maturation of the discipline. The field has expanded with the development of the computer and computer applications.[7]
The Space Age created new human factors issues such as weightlessness and extreme g-forces. Tolerance of the harsh environment of space and it's effects on the mind and body were widely studied[citation needed]
The dawn of the Information Age has resulted in the related field of Human–computer interaction (HCI). Likewise, the growing demand for and competition among consumer goods and electronics has resulted in more companies including human factors in product design.
HF&E Organisations
[edit]Formed in 1946 in the UK, the oldest professional body for human factors specialists and ergonomists is The Institute of Ergonomics and Human Factors, formally known as The Ergonomics Society.
The Human Factors and Ergonomics Society (HFES) was founded in 1957. The Society's mission is to promote the discovery and exchange of knowledge concerning the characteristics of human beings that are applicable to the design of systems and devices of all kinds.
The International Ergonomics Association (IEA) is a federation of ergonomics and human factors societies from around the world. The mission of the IEA is to elaborate and advance ergonomics science and practice, and to improve the quality of life by expanding its scope of application and contribution to society. As of September 2008, the International Ergonomics Association has 46 federated societies and 2 affiliated societies.
Related organisations
[edit]The Institute of Occupational Medicine (IOM) was founded by the coal industry in 1969, from the outset the IOM employed ergonomics staff to apply ergonomics principles to the design of mining machinery and environments. To this day, the IOM continues ergonomics activities, especially in the fields of musculoskeletal disorders; heat stress and the ergonomics of personal protective equipment (PPE). Like many in occupational ergonomics, the demands and requirements of an ageing UK workforce are a growing concern and interest to IOM ergonomists.
The International Society of Automotive Engineers (SAE) is a professional organization for mobility engineering professionals in the aerospace, automotive, and commercial vehicle industries. The Society is a standards development organization for the engineering of powered vehicles of all kinds, including cars, trucks, boats, aircraft, and others. The Society of Automotive Engineers has established a number of standards used in the automotive industry and elsewhere. It encourages the design of vehicles in accordance with established Human Factors principles. It is one the most influential organizations with respect to Ergonomics work in Automotive design. This society regularly holds conferences which address topics spanning all aspects of Human Factors/Ergonomics.[citation needed]
Specialisations
[edit]Specialisations within this field include visual ergonomics, cognitive ergonomics, usability, human–computer interaction, and user experience engineering. New terms are being generated all the time. For instance, “user trial engineer” may refer to a human factors professional who specialises in user trials.[citation needed] Although the names change, human factors professionals apply an understanding of human factors to the design of equipment, systems and working methods in order to improve comfort, health, safety and productivity.
According to the International Ergonomics Association within the discipline of ergonomics there exist domains of specialization:
- Physical ergonomics is concerned with human anatomy, and some of the anthropometric, physiological and bio mechanical characteristics as they relate to physical activity.[2]
- Cognitive ergonomics is concerned with mental processes, such as perception, memory, reasoning, and motor response, as they affect interactions among humans and other elements of a system. (Relevant topics include mental workload, decision-making, skilled performance, human-computer interaction, human reliability, work stress and training as these may relate to human-system and Human-Computer Interaction design.)[2]
- Organizational ergonomics is concerned with the optimization of socio-technical systems, including their organizational structures, policies, and processes.(Relevant topics include communication, crew resource management, work design, design of working times, teamwork, participatory design, community ergonomics, cooperative work, new work programs, virtual organizations, telework, and quality management.)[2]
- Environmental ergonomics is concerned with human interaction with the environment. The physical environment is characterized by: climate, temperature, pressure, vibration, light.[9]
There are more than twenty technical subgroups within the Human Factors and Ergonomics Society[10] (HFES), which indicates the range of applications for ergonomics.
Applications
[edit]Human factors issues arise in simple systems and consumer products as well. Some examples include cellular telephones and other hand held devices that continue to shrink yet grow more complex (a phenomenon referred to as "creeping featurism"), millions of VCRs blinking "12:00" across the world because very few people can figure out how to program them, or alarm clocks that allow sleepy users to inadvertently turn off the alarm when they mean to hit 'snooze'. A user-centered design (UCD), also known as a systems approach or the usability engineering life cycle aims to improve the user-system. Ergonomic principles have been widely used in the design of both consumer and industrial products. Past examples include screwdriver handles made with serrations to improve finger grip, and use of soft thermoplastic elastomers to increase friction between the skin of the hand and the handle surface.[citation needed]
HF&E continues to be successfully applied in the fields of aerospace, aging, health care, IT, product design, transportation, training, nuclear and virtual environments, among others. Physical ergonomics is important in the medical field, particularly to those diagnosed with physiological ailments or disorders such as arthritis (both chronic and temporary) or carpal tunnel syndrome. Pressure that is insignificant or imperceptible to those unaffected by these disorders may be very painful, or render a device unusable, for those who are. Many ergonomically designed products are also used or recommended to treat or prevent such disorders, and to treat pressure-related chronic pain.[citation needed]
One of the most prevalent types of work-related injuries are musculoskeletal disorders. Work-related musculoskeletal disorders (WRMDs) result in persistent pain, loss of functional capacity and work disability, but their initial diagnosis is difficult because they are mainly based on complaints of pain and other symptoms.[11] Every year 1.8 million U.S. workers experience WRMDs and nearly 600,000 of the injuries are serious enough to cause workers to miss work.[12] Certain jobs or work conditions cause a higher rate worker complaints of undue strain, localized fatigue, discomfort, or pain that does not go away after overnight rest. These types of jobs are often those involving activities such as repetitive and forceful exertions; frequent, heavy, or overhead lifts; awkward work positions; or use of vibrating equipment.[13] The Occupational Safety and Health Administration (OSHA) has found substantial evidence that ergonomics programs can cut workers' compensation costs, increase productivity and decrease employee turnover.[14] Therefore, it is important to gather data to identify jobs or work conditions that are most problematic, using sources such as injury and illness logs, medical records, and job analyses.[13]
Practitioners
[edit]Human factors practitioners come from a variety of backgrounds, though predominantly they are psychologists (from the various subfields of engineering psychology, cognitive psychology, perceptual psychology, applied psychology and experimental psychology) and physiologists. Designers (industrial, interaction, and graphic), anthropologists, technical communication scholars and computer scientists also contribute. Typically, an ergonomist will have an undergraduate degree in psychology, engineering, design or health sciences, and usually a masters degree or doctoral degree in a related discipline. Though some practitioners enter the field of human factors from other disciplines, both M.S. and Ph.D. degrees in Human Factors Engineering are available from several universities worldwide. The Human Factors Research Group (HFRG) at the University of Nottingham provides human factors courses at both at MSc and PhD level including a distance learning course in Applied Ergonomics.[15] Other Universities to offer postgraduate courses in human factors in the UK include Loughborough University, Cranfield University and the University of Oxford.[citation needed]
Methods
[edit]Until recently, methods used to evaluate human factors and ergonomics ranged from simple questionnaires to more complex and expensive usability labs.[16] Some of the more common HF&E methods are listed below:
- Ethnographic analysis: Using methods derived from ethnography, this process focuses on observing the uses of technology in a practical environment. It is a qualitative and observational method that focuses on "real-world" experience and pressures, and the usage of technology or environments in the workplace. The process is best used early in the design process.[17]
- Focus Groups are another form of qualitative research in which one individual will facilitate discussion and elicit opinions about the technology or process under investigation. This can be on a one to one interview basis, or in a group session. Can be used to gain a large quantity of deep qualitative data,[18] though due to the small sample size, can be subject to a higher degree of individual bias.[19] Can be used at any point in the design process, as it is largely dependent on the exact questions to be pursued, and the structure of the group. Can be extremely costly.
- Iterative design: Also known as prototyping, the iterative design process seeks to involve users at several stages of design, in order to correct problems as they emerge. As prototypes emerge from the design process, these are subjected to other forms of analysis as outlined in this article, and the results are then taken and incorporated into the new design. Trends amongst users are analyzed, and products redesigned. This can become a costly process, and needs to be done as soon as possible in the design process before designs become too concrete.[17]
- Meta-analysis: A supplementary technique used to examine a wide body of already existing data or literature in order to derive trends or form hypotheses in order to aid design decisions. As part of a literature survey, a meta-analysis can be performed in order to discern a collective trend from individual variables.[19]
- Subjects-in-tandem: Two subjects are asked to work concurrently on a series of tasks while vocalizing their analytical observations. This is observed by the researcher, and can be used to discover usability difficulties. This process is usually recorded.[citation needed]
- Surveys and Questionnaires: A commonly used technique outside of Human Factors as well, surveys and questionnaires have an advantage in that they can be administered to a large group of people for relatively low cost, enabling the researcher to gain a large amount of data. The validity of the data obtained is, however, always in question, as the questions must be written and interpreted correctly, and are, by definition, subjective. Those who actually respond are in effect self-selecting as well, widening the gap between the sample and the population further.[19]
- Task analysis: A process with roots in activity theory, task analysis is a way of systematically describing human interaction with a system or process to understand how to match the demands of the system or process to human capabilities. The complexity of this process is generally proportional to the complexity of the task being analyzed, and so can vary in cost and time involvement. It is a qualitative and observational process. Best used early in the design process.[19]
- Think aloud protocol: Also known as "concurrent verbal protocol", this is the process of asking a user to execute a series of tasks or use technology, while continuously verbalizing their thoughts so that a researcher can gain insights as to the users' analytical process. Can be useful for finding design flaws that do not affect task performance, but may have a negative cognitive affect on the user. Also useful for utilizing experts in order to better understand procedural knowledge of the task in question. Less expensive than focus groups, but tends to be more specific and subjective.[20]
- User analysis: This process is based around designing for the attributes of the intended user or operator, establishing the characteristics that define them, creating a persona for the user. Best done at the outset of the design process, a user analysis will attempt to predict the most common users, and the characteristics that they would be assumed to have in common. This can be problematic if the design concept does not match the actual user, or if the identified are too vague to make clear design decisions from. This process is, however, usually quite inexpensive, and commonly used.[19]
- "Wizard of Oz": This is a comparatively uncommon technique but has seen some use in mobile devices. Based upon the Wizard of Oz experiment, this technique involves an operator who remotely controls the operation of a device in order to imitate the response of an actual computer program. It has the advantage of producing a highly changeable set of reactions, but can be quite costly and difficult to undertake.
- Methods Analysis is the process of studying the tasks a worker completes using a step-by-step investigation. Each task in broken down into smaller steps until each motion the worker performs is described. Doing so enables you to see exactly where repetitive or straining tasks occur.
- Time studies determine the time required for a worker to complete each task. Time studies are often used to analyze cyclical jobs. They are considered “event based” studies because time measurements are triggered by the occurrence of predetermined events.[21]
- Work sampling is a method in which the job is sampled at random intervals to determine the proportion of total time spent on a particular task.[21] It provides insight into how often workers are performing tasks which might cause strain on their bodies.
- Predetermined time systems are methods for analyzing the time spent by workers on a particular task. One of the most widely used predetermined time system is called Methods-Time-Measurement or MTM. Other common work measurement systems include MODAPTS and MOST.[citation needed]
- Cognitive Walkthrough: This method is a usability inspection method in which the evaluators can apply user perspective to task scenarios to identify design problems. As applied to macroergonomics, evaluators are able to analyze the usability of work system designs to identify how well a work system is organized and how well the workflow is integrated.[22]
- Kansei Method: This is a method that transforms consumer’s responses to new products into design specifications. As applied to macroergonomics, this method can translate employee’s responses to changes to a work system into design specifications.[22]
- High Integration of Technology, Organization, and People (HITOP): This is a manual procedure done step-by-step to apply technological change to the workplace. It allows managers to be more aware of the human and organizational aspects of their technology plans, allowing them to efficiently integrate technology in these contexts.[22]
- Top Modeler: This model helps manufacturing companies identify the organizational changes needed when new technologies are being considered for their process.[22]
- Computer-integrated Manufacturing, Organization, and People System Design (CIMOP): This model allows for evaluating computer-integrated manufacturing, organization, and people system design based on knowledge of the system.[22]
- Anthropotechnology: This method considers analysis and design modification of systems for the efficient transfer of technology from one culture to another.[22]
- Systems Analysis Tool (SAT): This is a method to conduct systematic trade-off evaluations of work-system intervention alternatives.[22]
- Macroergonomic Analysis of Structure (MAS): This method analyzes the structure of work systems according to their compatibility with unique sociotechnical aspects.[22]
- Macroergonomic Analysis and Design (MEAD): This method assesses work-system processes by using a ten-step process.[22]
- Virtual Manufacturing and Response Surface Methodology (VMRSM): This method uses computerized tools and statistical analysis for workstation design.[23]
Weaknesses of HF&E Methods
[edit]Problems in how usability measures are employed include the fact that measures of learning and retention of how to use an interface are rarely employed during methods and some studies treat measures of how users interact with interfaces as synonymous with quality-in-use, despite an unclear relation.[24]
Although field methods can be extremely useful because they are conducted in the users natural environment, they have some major limitations to consider. The limitations include:
- Usually take more time and resources than other methods
- Very high effort in planning, recruiting, and executing than other methods
- Much longer study periods and therefore requires much goodwill among the participants
- Studies are longitudinal in nature, therefore, attrition can become a problem.[25]
See also
[edit]References
[edit]- ^ a b "Ergonomics". The University of Manchester. Centre for Occupational and Environmental Health. Retrieved 18 May 2012.
- ^ a b c d e International Ergonomics Association. What is Ergonomics. Website. Retrieved 6 December 2010.
- ^ Wojciech Jastrzębowski
- ^ Hywel Murrell
- ^ "Marmaras, N., Poulakakis, G. and Papakostopoulos, V. (1999). Ergonomic design in ancient Greece. Applied Ergonomics, 30 (4), pp. 361-368". Simor.ntua.gr. Retrieved 6 April 2012.
- ^ IG Okorji, 2009[clarification needed]
- ^ a b c d e The History of Human Factors and Ergonomics, David Meister
- ^ Porter, Elias H. (1964). Manpower Development: The System Training Concept. New York: Harper and Row, p. xiii.
- ^ "Home Page of Environmental Ergonomics Society". Environmental-ergonomics.org. Retrieved 6 April 2012.
- ^ "Technical Groups page at HFES Web site". Hfes.org. Retrieved 6 April 2012.
- ^ Isabel A P Walsh; Jorge Oishi; Helenice J C Gil Coury (February 2008). "Clinical and functional aspects of work-related musculoskeletal disorders among active workers". Programa de Pós-graduação em Fisioterapia. Universidade Federal de São Carlos. São Carlos, SP, Brasil. Rev. Saúde Pública vol.42 no.1 São Paulo.
{{cite journal}}
: CS1 maint: multiple names: authors list (link) - ^ Charles N. Jeffress (27 October 2000). "BEACON Biodynamics and Ergonomics Symposium". University of Connecticut, Farmington, Conn.
- ^ a b "Workplace Ergonomics: NIOSH Provides Steps to Minimize Musculoskeletal Disorders". 2003. Retrieved 23 April 2008.
- ^ Charles N. Jeffress (27 October 2000). BEACON Biodynamics and Ergonomics Symposium. University of Connecticut, Farmington, Conn.
{{cite book}}
: CS1 maint: location missing publisher (link) - ^ Human Factors Research Group (HFRG) at the University of Nottingham These courses are accredited by the Ergonomics Society. See this link
- ^ Stanton, N. (2005). Human Factors Methods; A Practical Guide For Engineering and Design. Aldershot, Hampshire: Ashgate Publishing Limited. ISBN 0-7546-4661-0.
{{cite book}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ a b Carrol, J.M. (1997). Human-Computer Interaction: Psychology as a Science of Design. Annu. Rev. Psyc., 48, 61-83.
- ^ Nedarc.org
- ^ a b c d e Wickens, C.D.; Lee J.D.; Liu Y.; Gorden Becker S.E. (1997). An Introduction to Human Factors Engineering, 2nd Edition. Prentice Hall. ISBN 0-321-01229-1.
- ^ Kuusela, H., Paul, P. (2000). A comparison of concurrent and retrospective verbal protocol analysis. The American Journal of Psychology, 113, 387-404.
- ^ a b Thomas J. Armstrong (2007). Measurement and Design of Work.
- ^ a b c d e f g h i Brookhuis, K., Hedge, A., Hendrick, H., Salas, E., and Stanton, N. (2005). Handbook of Human Factors and Ergonomics Models. Florida: CRC Press.
- ^ Ben-Gal et al. (2002), The Ergonomic Design of Workstation Using Rapid Prototyping and Response Surface Methodology. IIE Transactions on Design and Manufacturing, 34(4), 375-391. Available at: http://www.eng.tau.ac.il/~bengal/Ergonomics_Paper.pdf
- ^ Hornbaek, K (2006). Current Practice in Measuring Usability: Challenges to Usability Studies and Research, International Journal of Human-Computer Studies.
- ^ Dumas, J. S. (2006). Reviews of Human Factors and Ergonomics. Vol. 2. Human Factors and Ergonomics Society.
{{cite book}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help)
Further reading
[edit]- Books
- Meister, D. (1999). The History of Human Factors and Ergonomics. Mahwah, N.J.: Lawrence Erlbaum Associates. ISBN 0-8058-2769-2.
- Oviatt, S. L. (2000, March). "Multimodal systems that process what comes naturally". Communications of the ACM. 43 (3). New York: ACM Press: 45–53. doi:10.1145/330534.330538.
{{cite journal}}
: Check date values in:|date=
(help); Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - Sarter, N. (2002). "Multimodal information presentation in support of human-automation communication and coordination". Advances in Human Performance and Cognitive Engineering Research. 2. Netherlands: JAI: 13–36. doi:10.1016/S1479-3601(02)02004-0. ISBN 978-0-7623-0748-7.
{{cite journal}}
: CS1 maint: date and year (link) - Wickens, C.D. (1997). An Introduction to Human Factors Engineering, 2nd Edition. Prentice Hall. ISBN 0-321-01229-1.
{{cite book}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - Wickens, C. D. (1983). "Compatibility and resource competition between modalities of input, central processing, and output". Human Factors. 25 (2). Santa Monica, CA, United States: Human Factors and Ergonomics Society: 227–248. doi:10.1177/001872088302500209. ISSN 0018-7208. PMID 6862451.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - Wu, S. (2011). "Warranty claims analysis considering human factors". Reliability Engineering & System Safety. 96: 131–138. doi:10.1016/j.ress.2010.07.010.
- Jan Dul and Bernard Weedmaster, Ergonomics for Beginners - - A classic introduction on ergonomics - Original title: Vademecum Ergonomie (Dutch) -published and updated since 1960's
- Stephen Pheasant, Bodyspace - - A classic exploration of ergonomics
- Zamprotta, Luigi, La qualité comme philosophie de la production.Interaction avec l'ergonomie et perspectives futures, thèse de Maîtrise ès Sciences Appliquées - Informatique, Institut d'Etudes Supérieures L'Avenir, Bruxelles, année universitaire 1992-93, TIU [1] Press, Independence, Missouri (USA), 1994, ISBN 0-89697-452-9
- Kim Vicente, The Human Factor Full of examples and statistics illustrating the gap between existing technology and the human mind, with suggestions to narrow it
- Donald Norman, The Design of Everyday Things - - An entertaining user-centered critique of nearly every gadget out there (at the time it was published)
- Liu, Y (2007). IOE 333. Course pack. Industrial and Operations Engineering 333 (Introduction to Ergonomics), University of Michigan, Ann Arbor, MI. Winter 2007
- Wilson & Corlett, Evaluation of Human Work A practical ergonomics methodology. Warning: very technical and not a suitable 'intro' to ergonomics
- Wickens and Hollands (2000). Engineering Psychology and Human Performance. Discusses memory, attention, decision making, stress and human error, among other topics
- Alvin R. Tilley & Henry Dreyfuss Associates (1993, 2002), The Measure of Man & Woman: Human Factors in Design A human factors design manual.
- Valerie J Gawron (2000), Human Performance Measures Handbook Lawrence Erlbaum Associates - A useful summary of human performance measures.
- Peter Opsvik (2009), "Re-Thinking Sitting" Interesting insights on the history of the chair and how we sit from an ergonomic pioneer
- Thomas J. Armstrong (2008), Chapter 10: Allowances, Localized Fatigue, Musculoskeletal Disorders, and Biomechanics (not yet published)
- Computer Ergonomics & Work Related Upper Limb Disorder Prevention- Making The Business Case For Pro-active Ergonomics (Rooney et al, 2008)
- Peer-reviewed Journals (numbers between brackets are the ISI impact factor, followed by the date)
- Behaviour & Information Technology (0.915, 2008)
- Ergonomics (journal)|Ergonomics (0.747, 2001-2003)
- Applied Ergonomics (0.738, 2001-2003)
- Human Factors (1.373, 2010)
- International Journal of Industrial Ergonomics (0.395, 2001-2003)
- Human Factors and Ergonomics in Manufacturing (0.311, 2001-2003)
- Travail Humain (0.260, 2001-2003)
- Theoretical Issues in Ergonomics Science (-)
- International Journal of Human Factors and Ergonomics (-)
- International Journal of Occupational Safety and Ergonomics (-)
External links
[edit]- National Center for Human Factors Engineering in Healthcare
- Directory of Design Support Methods
- Engineering Data Compendium of Human Perception and Performance
- Index of Non-Government Standards on Human Engineering...
- Index of Government Standards on Human Engineering...
- Human Factors Engineering resources
- MANPRINT
- Human Factors in aviation
- Usability Engineering and E-Health
- NIOSH Topic Page on Ergonomics and Musculoskeletal Disorders
- Office Ergonomics Information from European Agency for Safety and Health at Work
- Human Factors Standards & Handbooks from the University of Maryland Department of Mechanical Engineering