Toyota Corolla (E30)

Third generation
Overview
Production	Aug 1974–July 1981
Assembly	Toyota City, Japan Port Melbourne, Australia, Thames, New Zealand, Samut Prakan, Thailand
Body and chassis
Body style	2-door coupe 2/4-door sedan 2-door hardtop coupé 3-door liftback 3/5-door station wagon 3-door van
Layout	FR layout
Related	Sprinter, Daihatsu Charmant
Powertrain
Engine	1.2 L 3K I4 1.3 L 4K I4 1.4 L T I4 1.6 L 2T I4 1.6 L 12T I4
Transmission	4/5-speed manual 2/3-speed automatic
Dimensions
Wheelbase	2,370 mm (93 in)
Length	3,995 mm (157.3 in)
Width	1,570 mm (62 in)
Height	1,375 mm (54.1 in)
Curb weight	880 kg (1,940 lb)
Chronology
Predecessor	Corolla E20
Successor	Corolla E70

The Corolla E30 was the third generation of cars sold by Toyota under the Corolla nameplate. It was built from August 1974 to July 1981 and marked Toyota's greatest growth in the United States in the wake of the fuel crisis. In addition to its sister model, the Sprinter, there was a redesigned-body version built by Toyota affiliate Daihatsu, called the Daihatsu Charmant. While there were certain fourth-generation models with a longer model life, this generation, when considered as a whole, was the longest-lived one, possibly due to the worldwide recession in the 1970s. A large range of cars were built using this chassis, including Corollas, Sprinters, Daihatsu, and the sporty Levin and Trueno models with the DOHC motor, with a fuel injection upgrade added to Japanese Levin models in January 1977.

The 3K engine was used in certain markets and later the 4K, while most Japanese and American models had the bigger 2T engine. A "Toyoglide" 2/3-speed automatic transmission was added as well as a four-speed and five-speed manual transmission, driving to the rear wheels. A three-door "liftback" (E50) and sports coupé (E51) was added in 1976. The E40 and E60 series were assigned to the Sprinter variants. In 1975, Toyota introduced the TTC-L (Toyota Total Clean-Lean Burn) on the 12T engine only, using a lean burn implementation.

Even though the E30 and E50 series were replaced by the E70 series in August 1979 in most markets, the original E30 series and the facelifted E50 series both continued production until July 1981.

Japan

Japanese market engines:

• 3K-C — 1.2 L (1166 cc) I4, 8-valve OHV, carb, 55 PS (40 kW)
• 3K-U — 1.2 L (1166 cc) I4, 8-valve OHV, carb,
• 3K-H — 1.2 L (1166 cc) I4, 8-valve OHV, carb, 71 PS (52 kW) (commercial vehicles only)
• T — 1.4 L (1407 cc) I4, 8-valve OHV, carb, 86 PS (63 kW)
• 2T-C — 1.6 L (1588 cc) I4, 8-valve OHV, carb, 75 PS (55 kW)
• 12T-U — 1.6 L (1588 cc) I4 8-valve OHV, carb, 88 PS (65 kW)
• 2T-G — 1.6 L (1588 cc) I4, 8-valve DOHC, carb, 124 PS (91 kW)

Japanese market chassis:

• E30 — Sedan, 2-door/4-door (3K, T)
• E31 — Sedan, 2-door/4-door (2T)
• E35 — Hardtop coupé (3K, 3K-C, 3K-B, 3K-BR, T)
• E36 — Van, 3 or 5-door (3K-H, T)
• E37 — Hardtop coupé (2T)
• E50 — Sports coupé (3K, 3K-C, 3K-U, T)
• E51 — Sports coupé (2T)
• E52 — Sports coupé/liftback (12T)

The 40- and 60-series were reserved for the Corolla's slightly more expensive Sprinter sibling.

• 
  1974–1977 Corolla (TE37) Levin coupé
• 
  1974–1977 Corolla (TE37) Levin coupé
• 
  Corolla 1600 GSL (TE31) four-door
• 
  Corolla 1600 (TE52) liftback
• 
  1979 Corolla 1400 Deluxe (TE36V) five-door van

North America

Road & Track was critical of the 1975 Corolla (introduced to North America in late 1974), calling it "large and heavy" and "expensive" compared to the Honda Civic and Datsun B210. They also criticized the "relatively crude rear suspension", lack of interior space, and poor fuel economy when compared to the VW Rabbit. The base model cost US$2,711 in 1975, but only the $2,989 "deluxe" model had features comparable to the contemporary pack.

Emissions became a problem further into the 1970s especially with the 3K engine, which became popular because of its low fuel consumption. Its replacement, the 4K engine, came with emissions equipment but only produced 60 hp (45 kW), despite a greater 1,290 cc displacement.

The E30 series 2T-C engines outmatched rival Datsun B210's engine output.

North American market engines:

• 2T-C — 1.6 L (1,588 cc) I4, 8-valve OHV, carb, 75 hp (56 kW)
• 3K-C — 1.2 L (1,166 cc) I4, 8-valve OHV, carb, 55 hp (41 kW)

North American market chassis:

• E31 — Sedan, 2-door/4-door (Std, DX)
• E38 — Wagon, 5-door (Std, DX)
• E37 — Hardtop coupé (DX, SR5)
• E51 — Sports coupé (Std, SR5)
• E51 — Liftback, 3-door (Std, SR5)

• 
  1976–1978 Corolla Deluxe 2-door sedan (US, MY 1977–1978)
• 
  1977 Corolla Deluxe 2-door sedan (US)
• 
  1974–1976 Corolla Deluxe 2-door sedan (Canada, MY 1975/1976)
• 
  Corolla Wagon (US)

Europe

Toyota Corolla Wagon (KE36)

In Europe, the third generation Corolla was offered in the same body styles as in the US. All the sedans and wagons, along with the Hardtop coupé, were only offered with the 1.2 L 3K, and the Liftback occasionally had the bigger 2T engine. The preceding 20-series Corolla continued to be available for as much as two years as a cheaper alternative, only with the two-door sedan body. A small facelift for the 1977 model year saw a redesigned dashboard and additional trim colors for the interior, and a new grille with small twin horizontal steel beams across it. For the 1979 model year, the last year of the E30 in Europe, the sedan's exterior trim was redesigned for the Deluxe model option with new tail lights (without the plastic chromed frame around) and another new grille.

Australia

The Corolla was manufactured in Australia at AMI-Toyota's Port Melbourne production facility. It was a popular car on the Australian market and most body styles available elsewhere were utilized. All variants originally came with Toyota's 1166 cc 3K-C engine, which was replaced by the 1290 cc 4K-C engine for the update released in November 1978.

Originally released in the SE trim, a luxury CS model was later released in February 1976. The CS featured carpeting, a clock, and reclining cloth seats. From July 1976, government regulated anti-pollution rules resulted in a loss of power for the further curtailed the 1166 cc 3K-C engine.

The facelifted version of the Corolla in Australia was released in November 1978. Among the changes were a new grille and dashboard, along with revised interior trim. The previous 3K-C engine was superseded by the 4K-C. At the same time, an entry-level SE version of the wagon was made available, with a range-topping XX coupe released in October 1979.

Due to the expenditure of manufacturing of the car in Australia, the production continued for several years after it was replaced by the next generation model everywhere else. A facelift was released in July 1980, giving the car a new squared-off grille and rectangular headlamps, however it could not conceal the car's dated styling. This facelift coincided with minor interior trim changes, new seats, revised suspension settings, and a five-speed manual option. Production continued until July 1981, when the already aged fourth-generation E70 range replaced it.

Australian market engines:

• 1.2 L (1166 cc) 3K-C I4, 8-valve OHV, carb, 55 hp (41 kW)
• 1.3 L (1290 cc) 4K-C I4, 8-valve OHV, carb, 60 hp (45 kW)

Australian market chassis:

• KE30: two-door/four-door sedan
• KE35: two-door hardtop coupé
• KE38: three-door van, five-door wagon
• KE55: two-door hardtop coupé, four-door sedan

• 
  1976 Corolla (KE30R) CS sedan
• 
  1976 Corolla (KE30R) CS sedan
• 
  1976–1978 Toyota Corolla (KE35R) CS coupe
• 
  1976–1978 Toyota Corolla (KE35R) CS coupe
• 
  1977–1978 Toyota Corolla (KE50R) liftback
• 
  1977–1978 Toyota Corolla (KE50R) liftback
• 
  1978–1980 Corolla (KE55R) SE sedan
• 
  1978–1980 Corolla (KE55R) SE sedan
• 
  1980–1981 Corolla (KE55R) CS sedan
• 
  1980–1981 Corolla (KE55R) CS sedan
• 
  1980–1981 Corolla (KE55R) coupe
• 
  1976 Corolla (KE36RV) wagon