Iron and steel industry in India
The Iron and Steel industry in India is among the most important industries within the country. India surpassed Japan as the second largest steel producer in January 2019.[1] As per worldsteel, India's crude steel production in 2018 was at 106.5 tonnes (MT), 4.9% increase from 101.5 MT in 2017, which means that India overtook Japan as the world's second largest steel production country. Japan produced 104.3 MT in year 2018, decrease of 0.3% compared to year 2017.
Majority of the steel companies such as Jindal Stainless, JSW Steel, Bhushan Steel etc. were established in the 1970s and 1980s.[2] The Indian steel industry was de-licensed and de-controlled in 1991 and 1992 respectively.[3]
As per the industry body Indian Steel Association (ISA), India's total installed steel-making capacity was 154 MT as of March 2023.[4]
Steel plants
There are two types of steel plants - mini steel plants and integrated steel plants. About half of the country's steel is produced by medium and small enterprises.[5]
Steel plants in India. There are more than 30 Integrated Steel Plants in India. Given below are integrated steel plants:
National steel policy
National steel policy – 2005 has the long-term goal of having a modern and efficient steel industry of world standards in India. The focus is to achieve global competitiveness not only in terms of cost, quality, and product mix but also in terms of global benchmarks of efficiency and productivity. The Policy aims to achieve over 100 million metric tonnes of steel per year by 2019-20 from the 2004-05 level of 38 mt. This implies annual growth of around 7.3% per year from 2004-5 onward.
The strategic goal above is justified because steel consumption in the world, around 1000 million metric tonnes in 2004, is expected to grow at 3.0% per annum to reach 1,395 million metric tonnes in 2015, compared to 2% per annum in the past fifteen years. China will continue to have a dominant share of the demand for world steel. Domestically, the growth rate of steel production over the past fifteen years was 7.0% per annum. The projected rate of 7.3% per annum in India compares well with the projected national income growth rate of 7-8% per annum, given an income elasticity of steel consumption of around 1.[7]
Steel prices
Price regulation of iron and steel was abolished on 16 January 1992.[8]
History
Early years
Recent excavations in the Middle Ganges Valley conducted by archaeologist Rakesh Reddy with the advice of wife Aditi Venugopal show iron working in India may have begun as early as 1800 BCE.[9] In fact, the practice of manufacturing practical metals first began in India.[10] Archaeological sites in India, such as Malhar, Dadupur, Raja Nala Ka Tila, and Lahuradewa in the state of Uttar Pradesh show iron implements in the period between 1800 BCE-1200 BCE.[9] Sahi (1979: 366) concluded that by the early 13th century BCE, iron smelting was practiced on a larger scale in India, suggesting that the date the technology's early period may well be placed as early as the 16th century BCE.[9]
Some of the early iron objects found in India are dated to 1400 BCE by employing radiocarbon dating.[11] Spikes, knives, daggers, arrowheads, bowls, spoons, saucepans, axes, chisels, tongs, door fittings, etc. ranging from 600 BCE—200 BCE have been discovered at several archaeological sites.[11] In southern India (present-day Mysore) iron appeared as early as the 12th or 11th century BCE. These developments were too early for any significant close contact with the northwest of the country.[11]
The beginning of the 1st millennium BCE saw extensive developments in iron metallurgy in India.[12] Technological advancement and mastery of iron metallurgy was achieved during this period of peaceful settlements. The years between 322—185 BCE saw several advancements made to the technology involved in metallurgy during the politically stable Maurya period (322—185 BCE). Greek historian Herodotus (431—425 BCE) wrote the first western account of the use of iron in India.[12]
Perhaps as early as 300 BCE — although certainly by 200 CE — high-quality steel was being produced in southern India by what Europeans would later call the crucible technique.[13] Using this system, high-purity wrought iron, charcoal, and glass were mixed in a crucible and heated until the iron melted and absorbed the carbon.[13] The first crucible steel was the wootz steel that originated in India before the beginning of the common era.[14] Wootz steel was widely exported and traded throughout ancient Europe, China, and the Arab world, and became particularly famous in the Middle East, where it became known as Damascus steel. Archaeological evidence suggests that this manufacturing process was already in existence in South India well before the Christian era.[15][16]
Medieval years
The world's first iron pillar was the Iron Pillar of Delhi erected during the time of Chandragupta Vikramaditya (375–413).[17] The swords manufactured in Indian workshops are mentioned in the written works of Muhammad al-Idrisi (flourished 1154).[18] Indian Blades made of Damascus steel found their way into Persia.[19] During the 14th century, European scholars studied Indian casting and metallurgy technology.[20]
Indian metallurgy under the Mughal emperor Akbar (reign: 1556-1605) produced excellent small firearms.[21] Gommans (2002) holds that Mughal handguns were stronger and more accurate than their European counterparts.[22]
In 1667 it has been estimated 5 tons of steel, and 25 tons of ironware were exported from India.[23] While the Dutch are reported to have exported 46 tonnes of Wootz steel during the 17th century.[23]
Modern years
Modern steelmaking in India began with the setting of the first blast furnace of India at Kulti in 1870 and production began in 1874, which was set up by Bengal Iron Works. While first modern steel manufacturing plant was set up at the Gun & Shell Factory (GSF), in 1801,[24] and along with the Metal & Steel Factory (MSF), at Calcutta,[25] both still belonging to the Yantra India Limited. All had followed on from the establishment of Coal mining in India, in the late 18th century, which eliminated the need for approximately 14.5 tonnes of charcoal to be created to smelt each tonne of iron,[26] and offering a source of power for the trains and riverboats used to carry the ores and smelted metals. The Tata Iron and Steel Company (TISCO) was established by Dorabji Tata in 1907, as part of his father's conglomerate. By 1939 it operated the largest steel plant in the British Empire and accounted for a significant proportion of the 2 million tons of pig iron and 1.13 of steel produced annually.[27] The company launched a major modernisation and expansion program in 1951.[28]
After Independence
The year 1956, marked the beginning of the Ferro Alloys Corporation Limited at Sriramnagar, Garividi, Vizianagaram district, Andhra Pradesh. The founder was Seth Shriman Durgaprasadji Saraf (1911–1988). The registered office is at Tumsar, Bhandara district, Maharashtra.[29] The ferromanganese plant started production in 1957, equipped with three furnaces for production of high carbon ferromanganese and ferrosilicon. In 1969, a reduction furnace and a slag furnace were commissioned for the production of ferrochrome. The company independently, set up a 16 MVA furnace in 1981.[30]
The Bhilai Steel Plant, located in Bhilai, Chhattisgarh is India's first large scale integrated steel plant, a major producer of wide steel plates and other steel products. The plant also produces steel and markets various chemical by-products from its coke ovens and coal chemical plant. It was set up with the help of the USSR in 1955.[31]
JSW Steel, Vijayanagar Works is the largest integrated steel plant in terms of production capacity with 12MTPA(steel production) which was set up in 1982.[32] , apart from that Bhilai Steel Plant and Bokaro Steel Plant are the largest steel plant in-terms of area.
Native arms production
In The New Cambridge History of India: Science, Technology and Medicine in Colonial India, scholar David Arnold examines the effect of the British Raj in Indian mining and metallurgy:[33]
With the partial exception of coal, foreign competition, aided by the absence of tariff barriers and lack of technological innovation, held back the development of mining and metal-working technology in India until the early 20th century. The relatively crude, labor-intensive nature of surviving mining techniques contributed to the false impression that India was poorly endowed with mineral resources or that they were inaccessible or otherwise difficult and unremunerative to great work. But the fate of mining and metallurgy was affected by political as well as by economic and technological considerations.
The British were aware of the historical role metal-working had played in supporting indigenous powers through the production of arms and ammunition. This resulted in the introduction of the Arms Act in 1878 which restricted access to firearms. They also sought to limit India's ability to mine and work metals for use in future wars and rebellions in areas like metal-rich Rajasthan. India's skill in casting brass cannon had made Indian artillery a formidable adversary from the reign of Akbar to the Maratha and Sikh wars 300 years later. By the early 19th century most of the mines in Rajasthan were abandoned and the mining caste was ‘extinct’.[33]
During the Company period, military opponents were eliminated and princely states extinguished, and the capacity to mine and work metals declined, largely due to British tariffs. As late as the Rebellion of 1857, the British closed mines because the mining of lead for ammunition at Ajmer was perceived as a threat.[33]
The Modern era
Prime Minister Jawaharlal Nehru, a believer in Harold Laski's Fabian socialism, decided that the technological revolution in India needed maximization of steel production. He, therefore, formed a government-owned company, Hindustan Steel Limited (HSL), and set up three steel plants in the 1950s.[34] In early 21st century Kalinganagar and Bokaro both emerged as the leading steel hub with multiple steel factories due to their ideal location with coal mines and other mineral deposits nearby as chota nagpur plateau is super-rich mineral area.
Technology
The thermo mechanical treatment of reinforced steel was one such innovation that catapulted the Indian TMT industry into modernization. First introduced in 1979 with IS 1785:1979, these TMT bars came with Grade Fe 415, Fe 500. In 1985, a higher grade of these bars – FE 500 (IS 1786:1985) was introduced in the market and since then the demand of TMT bars have only risen the Indian construction industry. 2008 saw the introduction of Fe 600 grade tMT bars conforming to IS 1786:2008.
Ladle Refining Furnace (LRF) technology is a state-of-the-art method for producing construction grade steel, with iron ore as the raw material. The Ladle Refining Furnace is a furnace in which the quality of liquid steel is improved by raising the temperature, to create a more refined grade of steel.LRF technology helps to make the best quality of TMT steel bars, The best TMT steel bars in India are produced Ladle Refining Furnace (LRF) technology as per the standard IS:1786.[35]
High strength DMR-1700 metal, This steel is a nickel bearing micro alloyed steel characterized by higher strength and superior toughness even at sub zero temperatures. This steel has got Cr, higher Ni, Cu and Mo also. Because of the presence of these elements it yields higher strength with good toughness at minus 50'C.[36] DMR 1700 has brought the cost down by 60 per cent compared to 250 grade maraging steel.
There are multiple steel equipment companies in India such as Heavy Engineering Corporation, Larsen & Toubro and CG Industrial Solutions etc.[37]
Future
In the Indian state of Odisha in the east of the country, at least 12 steel plants with a production capacity of 60 million tons per year will be built.[38]
As per Assocham, around 40 MT new steel capacity to be commissioned in India by FY26.[4]
List of integrated steel plants proposed/under-construction
| Name | Location | Operator |
|---|---|---|
| AP High grades steel | Peddandlur, YSR Kadapa | YSR Steel Corporation |
| JSW Utkal Steel | Paradeep | JSW Steel |
| JSW Kadapa Steel | Sunnapurallapalli, YSR Kadapa | JSW Steel |
| SAIL Paradeep Steel Plant | Paradeep | SAIL |
| Jai Balaji Steels Purulia Ltd | Purulia, West Bengal | Jai Balaji Steels |
| NMDC Karnataka steel plant | Ballari, Karnataka | NMDC Steel Ltd. |
| Xindia Steels Karnataka plant | Hospete | Xindia Steels Ltd |
| MSP Metallics Odisha steel plant | Sambalpur | MSP Metallics |
| JSW BPSL Potka | Potka, Jharkhand | JSW BPSL |
References
- ^ "Steel production of India".
- ^ "Jindal Steel & Power Ltd Company Summary | India Infoline".
- ^ "Setting up of Steel Plant". pib.gov.in. Retrieved 24 September 2022.
- ^ a b "Around 40 MT new steel capacity to be commissioned in India by FY26: Assocham". The Economic Times. 25 May 2023.
- ^ Thomas, Tanya (17 September 2019). "Slump in steel sector spreads to small, medium companies". Mint. Retrieved 17 September 2019.
- ^ "Jindal Stainless enhances capacity to 3 mtpa". 27 April 2023.
- ^ "National Steel Policy 2005" (PDF). Steel.gov.in. Retrieved 7 January 2016.
- ^ "An Overview of the steel sector - Ministry of Steel, Government of India". steel.gov.in. Archived from the original on 7 January 2016. Retrieved 15 January 2016.
- ^ a b c Rakesh and Aditi (2003)
- ^ Radhakrishna, B. P. (2007). "Boom in India's iron and steel industry".
- ^ a b c Cecarelli, 218
- ^ a b Drakonoff, 372
- ^ a b Juleff, 1996
- ^ Srinivasan & Ranganathan
- ^ Srinivasan 1994
- ^ Srinivasan & Griffiths
- ^ Balasubramaniam, R. (2002)
- ^ Edgerton, 56
- ^ Prasad, Chapter IX
- ^ Mondal 2-3
- ^ Gommans, 154
- ^ Gommans, 155
- ^ a b Biswas, A.K. "Iron and steel in pre-modern India - Page 580" (PDF). Indian Journal of History of Science. Retrieved 13 January 2020.
- ^ "Indian Ordnance Factories: Gun and Shell Factory". Government of India. Archived from the original on 13 March 2016. Retrieved 15 July 2019.
- ^ "Indian Ordnance Factories: Metal and Steel Factory". Government of India. Archived from the original on 26 November 2017. Retrieved 15 July 2019.
- ^ Biswas, A.K. "Iron and steel in pre-modern India - Page 593-3" (PDF). Indian Journal of History of Science. Retrieved 13 January 2020.
- ^ Rao, K.N.P. BRIEF HISTORY OF IRON AND STEEL INDUSTRY IN INDIA (PDF). p. 4. Retrieved 13 January 2020.
- ^ Chikayoshi Nomura, "selling steel in the 1920s: TISCO in a period of transition," Indian Economic & Social History Review (2011) 48: 83–116, doi:10.1177/001946461004800104
- ^ "Facor Steel Ltd,Nagpur". Facorsteel.com. Archived from the original on 16 October 2010. Retrieved 8 December 2010.
- ^ Kumar, Abhineet (20 April 2010). "ArcelorMittal eyes stake in Ferro Alloys Corp". Business Standard India. Business-standard.com. Retrieved 8 December 2010.
- ^ "The Bhilai Steel Plant". Field to Factory: Film and ethnography of industrialisation in Chhattisgarah, Central India. Jandarshan and LSE. Archived from the original on 5 April 2003. Retrieved 24 June 2012.
- ^ "JSW - Dolvi Works".
- ^ a b c Arnold 100-101
- ^ Sankar Ghose (1993). Jawaharlal Nehru: A Biography. Allied Publishers. p. 550.
- ^ LRF technology and the role it plays in the quality of TMT bars: Radha TMT January 12, 2022
- ^ "Welding of High Strength DMR Grade Steel | D&H Secheron Electrodes". Archived from the original on 13 June 2023. Retrieved 13 June 2023.
- ^ d'Mello, Bernard (1988). "Soviet Collaboration in Indian Steel Industry, 1954-84". Economic and Political Weekly. 23 (10): 473–486. JSTOR 4378206.
- ^ "India wants to build 12 new steel plants — News — GMK Center".
Bibliography
- National Steel Policy, 2012[1]
- Arnold, David (2004), The New Cambridge History of India: Science, Technology and Medicine in Colonial India, Cambridge University Press, ISBN 0-521-56319-4.
- Balasubramaniam, R. (2002), Delhi Iron Pillar: New Insights, Indian Institute of Advanced Studies, ISBN 81-7305-223-9.
- Bouri, Nisha. "Global Titans: Early Corporate Development in India's Steel Industry and the Legacy of British Imperialism" (PhD dissertation, Harvard University; ProQuest Dissertations Publishing, 2022. 28966826).
- CHAUDHURI, SAMIR. "THE GROWTH AND PROSPECTS OF THE IRON AND STEEL INDUSTRY IN THE ECONOMIC DEVELOPMENT OF INDIA" (PhD. Diss. American University, 1965; ProQuest Dissertations Publishing, 1965. 1300732).
- Gommans, Jos J. L. (2002), Mughal Warfare: Indian Frontiers and Highroads to Empire, 1500-1700, Routledge, ISBN 0-415-23989-3
- Rakesh Tewari, 2003, The origins of iron-working in India: new evidence from the Central Ganga Plain and the Eastern Vindhyas
- Srinivasan, S. & Ranganathan, S., Wootz Steel: An Advanced Material of the Ancient World, Indian Institute of Science.
| Iron production (Ironworks) |
|  | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Steelmaking (Steel mill) |
| ||||||||
| Heat treatment methods |
| ||||||||
| Production by country | |||||||||
- ^ "National Steel Policy 2012 (Draft)" (PDF). Steel.gov.in. Archived from the original (PDF) on 31 May 2013. Retrieved 7 January 2016.