Jump to content

Oripavine

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Mplanine (talk | contribs) at 07:08, 4 November 2022 (added the 3D structure to the chemical infobox). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Oripavine
Names
IUPAC name
6,7,8,14-Tetradehydro-4,5α-epoxy-6-methoxy-17-methylmorphinan-3-ol
Other names
3-O-desmethylthebaine
Identifiers
3D model (JSmol)
ChEMBL
ChemSpider
ECHA InfoCard 100.006.715 Edit this at Wikidata
EC Number
  • 207-385-6
KEGG
MeSH Oripavine
UNII
  • InChI=1S/C18H19NO3/c1-19-8-7-18-11-4-6-14(21-2)17(18)22-16-13(20)5-3-10(15(16)18)9-12(11)19/h3-6,12,17,20H,7-9H2,1-2H3/t12-,17+,18+/m1/s1 checkY
    Key: ZKLXUUYLEHCAMF-UUWFMWQGSA-N checkY
  • InChI=1S/C18H19NO3/c1-19-8-7-18-11-4-6-14(21-2)17(18)22-16-13(20)5-3-10(15(16)18)9-12(11)19/h3-6,12,17,20H,7-9H2,1-2H3/t12-,17+,18+/m1/s1
    Key: ZKLXUUYLEHCAMF-UUWFMWQGBL
  • Key: ZKLXUUYLEHCAMF-UUWFMWQGSA-N
  • OC1=C(O[C@H]2C(OC)=CC=C3[C@@]42CCN5C)C4=C(C[C@H]35)C=C1
Properties
C18H19NO3
Molar mass 297.348 g/mol
Pharmacology
N02A (WHO)
SC
Legal status
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Oripavine is an opioid and the major metabolite of thebaine. It is the parent compound from which a series of semi-synthetic opioids are derived, which includes the compounds etorphine and buprenorphine. Although its analgesic potency is comparable to morphine, it is not used clinically due to its severe toxicity and low therapeutic index. Due to its use in manufacture of strong opioids, oripavine is a controlled substance in some jurisdictions.

Pharmacological properties

Oripavine possesses an analgesic potency comparable to morphine; however, it is not clinically useful due to severe toxicity and low therapeutic index. In both mice and rats, toxic doses caused tonic-clonic seizures followed by death, similar to thebaine.[1] Oripavine has a potential for dependence which is significantly greater than that of thebaine but slightly less than that of morphine.[2]

Bridged derivatives

Of much greater relevance are the properties of the orvinols, a large family of semi-synthetic oripavine derivatives classically synthesized by the Diels-Alder reaction of thebaine with an appropriate dienophile followed by 3-O-demethylation to the corresponding bridged oripavine. These compounds were developed by the group led by K. W. Bentley in the 1960s, and these Bentley compounds represent the first series of "super-potent" μ-opioid agonists, with some compounds in the series being over 10,000 times the potency of morphine as an analgesic.[3][4][5] The simple bridged oripavine parent compound 6,14-endoethenotetrahydrooripavine is already 40 times the potency of morphine,[6] but adding a branched tertiary alcohol substituent on the C7 position results in a wide range of highly potent compounds.[7]

Drug name R Analgesic Potency (Morphine = 1)
isobutyl 10
phenyl 34
n-hexyl 58
methyl 63
cyclopentyl 70
ethyl 330
phenethyl 2200
Etorphine n-propyl 3200
cyclohexyl 3400
n-pentyl 4500
n-butyl 5200
isopentyl 9200

Other notable derivatives then result from further modification of this template, with saturation of the 7,8-double bond of etorphine resulting in the even more potent dihydroetorphine (up to 12,000× potency of morphine) and acetylation of the 3-hydroxy group of etorphine resulting in acetorphine (8700× morphine)—although while the isopentyl homologue of etorphine is nearly three times more potent, its 7,8-dihydro and 3-acetyl derivatives are less potent than the corresponding derivatives of etorphine at 11,000 and 1300 times morphine, respectively. Replacing the N-methyl group with cyclopropylmethyl results in opioid antagonists such as diprenorphine (M5050, which is used as an antidote to reverse the effects of etorphine, M99), and partial agonists such as buprenorphine, which is widely used in the treatment of opioid addiction.

Due to the relative ease of synthetic modification of oripavine to produce other narcotics (by either direct or indirect routes via thebaine), the World Health Organization's Expert Committee on Drug Dependence recommended in 2003 that oripavine be controlled under Schedule I of the 1961 Single Convention on Narcotic Drugs.[8] On March 14, 2007, the United Nations Commission on Narcotic Drugs formally decided to accept these recommendations, and placed oripavine in the Schedule I.[9]

Until recently, oripavine was a Schedule II drug in the United States by default as a thebaine derivative, although it was not explicitly listed. However, as a member state under the 1961 Single Convention on Narcotic Drugs, the US was obliged to specifically control the substance under the Controlled Substances Act following its international control by the UN Commission on Narcotic Drugs. On September 24, 2007, the Drug Enforcement Administration formally added oripavine to Schedule II.[10]

Under the Controlled Substances Act 1970, oripavine has an ACSCN of 9330 and a 2013 manufacturing quota of 22,750 kg (50,160 lb).

Biosynthesis

This molecule is biosynthetically related to the morphinane derivatives metabolism, where thebaine and morphine are implicated.[11]

Morphine biosynthesis
Morphine biosynthesis

References

  1. ^ Yeh, SY (December 1981). "Analgesic activity and toxicity of oripavine and phi-dihydrothebaine in the mouse and rat". Archives Internationales de Pharmacodynamie et de Thérapie. 254 (2): 223–40. PMID 6121539.
  2. ^ Chanoit, Pierre; et al. (1981). "Dependence potential of oripavine". Bulletin on Narcotics. 33 (3): 29–35. PMID 7039748. Retrieved 2007-10-05.
  3. ^ Bentley, K. W.; Boura, A. L.; Fitzgerald, A. E.; Hardy, D. G.; McCoubrey, A; Aikman, M. L.; Lister, R. E. (1965). "Compounds Possessing Morphine-Antagonizing or Powerful Analgesic Properties". Nature. 206 (4979): 102–3. Bibcode:1965Natur.206..102B. doi:10.1038/206102a0. PMID 14334338. S2CID 4296776.
  4. ^ Bentley, K. W.; Hardy, D. G.; Meek, B (1967). "Novel analgesics and molecular rearrangements in the morphine-thebaine group. II. Alcohols derived from 6,14-endo-etheno- and 6,14-endo-ethanotetrahydrothebaine". Journal of the American Chemical Society. 89 (13): 3273–80. doi:10.1021/ja00989a031. PMID 6042763.
  5. ^ Bentley, K. W.; Hardy, D. G.; Meek, B (1967). "Novel analgesics and molecular rearrangements in the morphine-thebaine group. IV. Acid-catalyzed rearrangements of alcohols of the 6,14-endo-ethenotetrahydrothebaine series". Journal of the American Chemical Society. 89 (13): 3293–303. doi:10.1021/ja00989a033. PMID 6042765.
  6. ^ Lewis, J. W.; Bentley, K. W.; Cowan, A (1971). "Narcotic analgesics and antagonists". Annual Review of Pharmacology. 11: 241–70. doi:10.1146/annurev.pa.11.040171.001325. PMID 4948499.
  7. ^ Bentley, K. W.; Hardy, D. G. (1967). "Novel analgesics and molecular rearrangements in the morphine-thebaine group. 3. Alcohols of the 6,14-endo-ethenotetrahydrooripavine series and derived analogs of N-allylnormorphine and -norcodeine". Journal of the American Chemical Society. 89 (13): 3281–92. doi:10.1021/ja00989a032. PMID 6042764.
  8. ^ WHO Expert Committee on Drug Dependence. "Thirty-third report". WHO Technical Report Series, No. 915. Geneva, World Health Organization, 2003. Accessed September 17, 2007.
  9. ^ UN Commission on Narcotic Drugs. "Decision 50/1: Inclusion of oripavine in Schedule I of the Single Convention on Narcotic Drugs of 1961 and that Convention as amended by the 1972 Protocol." Report on the fiftieth session. Document E/CN.7/2007/16, p 52. Geneva, United Nations Office on Drugs and Crime, 2007. Accessed September 18, 2007.
  10. ^ Drug Enforcement Administration. "Designation of Oripavine as a Basic Class of Controlled Substance." Federal Register. September 2007; 72 (184):p54208-54210. Accessed October 25, 2007.
  11. ^ Novak; et al. (2000). "Morphine Synthesis and Biosynthesis—An Update" (PDF). Current Organic Chemistry. 4 (3): 343–362. CiteSeerX 10.1.1.515.9096. doi:10.2174/1385272003376292.