Wikipedia:Reference desk/Science
of the Wikipedia reference desk.
Main page: Help searching Wikipedia
How can I get my question answered?
- Select the section of the desk that best fits the general topic of your question (see the navigation column to the right).
- Post your question to only one section, providing a short header that gives the topic of your question.
- Type '~~~~' (that is, four tilde characters) at the end – this signs and dates your contribution so we know who wrote what and when.
- Don't post personal contact information – it will be removed. Any answers will be provided here.
- Please be as specific as possible, and include all relevant context – the usefulness of answers may depend on the context.
- Note:
- We don't answer (and may remove) questions that require medical diagnosis or legal advice.
- We don't answer requests for opinions, predictions or debate.
- We don't do your homework for you, though we'll help you past the stuck point.
- We don't conduct original research or provide a free source of ideas, but we'll help you find information you need.
How do I answer a question?
Main page: Wikipedia:Reference desk/Guidelines
- The best answers address the question directly, and back up facts with wikilinks and links to sources. Do not edit others' comments and do not give any medical or legal advice.
August 7
UV filters
I'm interesting in finding out if some sunglasses and a camera filter that I have are actually doing a good job of blocking UV light. Is there any easy or cheap way to measure the amount blocked? Any way to tell if cheap sunglasses are actually helping or just hurting or to see if my UV camera filter is doing anything put protecting the lens? Tobyc75 (talk) 02:38, 7 August 2009 (UTC)
- Sunglasses in some countries are standards tested and rated, see Sunglasses#Standards, but may depend where you live, and don't know how you'd do this yourself if you live somewhere where they're not. In general, in Australia, the rule of thumb is don't buy them if they're so cheap as not to be standards approved. Re the camera what are you actually wanting the UV filter to do? Try the identical shot with and without the filter on and compare the photos down to a pixel level - but many people (myself included) chiefly use the UV filter to protect the lens itself rather than for any real effect. See UV filter and Photographic_filter#Clear_and_ultraviolet. --jjron (talk) 03:10, 7 August 2009 (UTC)
- I bought a Hoya Super HMC UV filter for a camera lens, and inside the package was a paper card with a specially treated dot. The dot changes color when exposed to UV light. Outdoors in sunlight, the dot would change color, and when I put the filter in front of it, it would go back to white. I don't know what the dot was made of, or its wavelength response, or sensitivity, or anything else that would make it a quantitative test. -- Coneslayer (talk) 12:42, 7 August 2009 (UTC)
- A fluorescent thing would help - but only proves that a narrow band of uv is being blocked/transmitted in general. A better solution would be a photodiode (light meter) and a filter that you know only allows uv (but not visible)83.100.250.79 (talk) 13:00, 7 August 2009 (UTC)
- I don't know that it matters to you - but I recently got a new set of eye glasses - specifically for driving. I asked about photochromic lenses (the kind that change color) and asked if they were able to block UV efficiently. I was surprised to hear that pretty much all normal eye glasses sold through mainstream opticians in the US now have UV-protective coatings as a matter of course...even the glasses that are completely clear! So you don't even need tinted glass - a completely clear lens can be an efficient UV blocker if it has the right coatings. SteveBaker (talk) 17:46, 7 August 2009 (UTC)
- In fact you often don't even need coatings - CR-39 which is (probably) the most popular lens material blocks almost all uv itself. It's quite difficult to get a glass or plastic lens that doesn't cut out practically all uv.83.100.250.79 (talk) 23:24, 7 August 2009 (UTC)
- UV filters are essential for outdoor photography using film, since film is more sensitive to UV than to visible light, and even the near-opacity of glass to UV isn't enough. Digital cameras are the other way around: they're more sensitive to visible than to UV, and the glass that makes up the lenses is sufficient to filter out the rest. --Carnildo (talk) 23:00, 7 August 2009 (UTC)
- Thanks for the responses. Re: the sunglasses, I was actually interested in whether the cheap children's sunglasses did more harm than good, and I'm in the US, so I'm not sure if I've seen any government testing stickers on them. I'd guess that, yes the cheap ones most likely are pretty bad. As for the camera filter, I mostly just use it to protect the lens. It's on a DSLR and I can't see any difference between with and without the filter. Tobyc75 (talk) 23:19, 7 August 2009 (UTC)
- As I mentioned above in response to SteveBaker - most optical materials block uv anyway, so your uv filter is probably only protecting the lens (which is a good thing anyway). Don't know about sunglasses - you're probably right. 83.100.250.79 (talk) 23:43, 7 August 2009 (UTC)
- The trouble with sunglasses is that the darkened lenses fool people into looking at brighter objects without squinting and the reduction in visible light causes your irises to open wider to allow in more light. So if the sunglasses aren't really good a blocking UV, the result is much more UV entering the eye than would normally be the case if you weren't wearing them. However, at least in Europe, those kinds of sunglasses are supposedly banned. SteveBaker (talk) 03:05, 8 August 2009 (UTC)
- As I mentioned above in response to SteveBaker - most optical materials block uv anyway, so your uv filter is probably only protecting the lens (which is a good thing anyway). Don't know about sunglasses - you're probably right. 83.100.250.79 (talk) 23:43, 7 August 2009 (UTC)
- Thanks for the responses. Re: the sunglasses, I was actually interested in whether the cheap children's sunglasses did more harm than good, and I'm in the US, so I'm not sure if I've seen any government testing stickers on them. I'd guess that, yes the cheap ones most likely are pretty bad. As for the camera filter, I mostly just use it to protect the lens. It's on a DSLR and I can't see any difference between with and without the filter. Tobyc75 (talk) 23:19, 7 August 2009 (UTC)
Bike gearing
This came up in a discussion about motorbike gearing, but probably easier to ask in the context of bicycle gearing and in a simplified form.
Consider a multi-speed bike with typical front and rear gears, and for convenience express the ratios as FR:RR. Now lets take two gear ratios, say 28 teeth front and 14 teeth on the rear, i.e., 28:14, and 48 front & 24 rear, i.e., 48:24. Mathematically both these ratios simplify to 2:1, which is the easy bit.
For a perhaps less 'artificial' or simplistic example consider ratios of 38:16 and 48:20, which come out to 2.38 & 2.40, which again is mathematically essentially the same.
The question is that while these ratios are basically the same mathematically, physically is there a difference between changing the gearing on the 'bigger' chainring or the 'smaller' chainring, i.e., would these gear ratios require say an identical amount of energy to push them?
I'm thinking in terms of effects due to torque, angular velocity or momentum due to the different sized rings, or other relevant things. Anyone with better knowledge of this than me... Thanks in advance. --jjron (talk) 02:58, 7 August 2009 (UTC)
- Torque (rotational force) depends on radius. What is the relationship between number of teeth and the circumference of the gear? What is the relationship between circumference and radius? Based on those answers, you can determine if tooth-ratio is equivalent to torque-ratio. Once you've figured it out yourself, you can check with our gear ratio article for more information. DMacks (talk) 03:24, 7 August 2009 (UTC)
- Yes, you are right. what matters here is the ratio so, as you pointed out, 28:14 and 48:24 will lead to essentially the same torque, assuming that other factors such as friction can be considered negligible. Dauto (talk) 04:36, 7 August 2009 (UTC)
From Surely You're Joking, Mr. Feynman!:
“ | Near the end of the summer I was given my first real design job: a machine that would make a continuous curve out of a set of points--one point coming in every fifteen seconds--from a new invention developed in England for tracking airplanes, called "radar." It was the first time I had ever done any mechanical designing, so I was a little bit frightened. I went over to one of the other guys and said, "You're a mechanical engineer; I don't know how to do any mechanical engineering, and I just got this job. "There's nothin' to it," he said. "Look, I'll show you. There's two rules you need to know to design these machines. First, the friction in every bearing is so-and-so much, and in every gear junction, so-and-so much. From that, you can figure out how much force you need to drive the thing. Second, when you have a gear ratio, say 2 to 1, and you are wondering whether you should make it 10 to 5 or 24 to 12 or 48 to 24, here's how to decide: You look in the Boston Gear Catalogue, and select those gears that are in the middle of the list. The ones at the high end have so many teeth they're hard to make. If they could make gears with even finer teeth, they'd have made the list go even higher. The gears at the low end of the list have so few teeth they break easy. So the best design uses gears from the middle of the list." I had a lot of fun designing that machine. By simply selecting the gears from the middle of the list and adding up the little torques with the two numbers he gave me, I could be a mechanical engineer! |
” |
70.90.174.101 (talk) 07:52, 7 August 2009 (UTC)
- And the parts in the middle of the spec range are most likely to be available on short turnaround. As I mentioned above, there's a difference between "it's in the catalog" and "you can order it and receive it in a reasonable time". This is what's mean by the "OTS" in "COTS." Nimur (talk) 17:21, 7 August 2009 (UTC)
- Naturally, if we neglect friction, the torque onto the pedals of a bicycle needed to drive it forward with a specified force is dependent on just the gear ratio. However, the torque is transferred to tension in the chain and that is inversely proportional to the radius of a gear. Hence, to save the chain it's best to use preferably large cogwheels, as then both the tension and the bending of the chain are minimum. — Pt (T) 02:39, 8 August 2009 (UTC)
- The actual diameters also matter if you're dealing with shifting Derailleur gears. This shift is a change of absolute radius and chain-slack on one gear, not a ratio between two gears, but the goal is a shift of relative ratio. That means if the gear has a large radius, a relatively large change is needed to accomplish a shift of ratio. That is, if you are doing a ratio shift 3:1→2:1, changing gears 30:10→20:10 is a change of 10 whereas 60:20→40:20 is a change of 20. WP:OR says derailleurs and chains are more susceptible to jamming with very large changes. Also, the derailleur needs to take up all the slack, so the larger the change, the larger the derailleur cage needs to be. At the other extreme (small gears), a small change in radius represents a more significant change in ratio, so they need to be manufactured more accurately and precisely. DMacks (talk) 05:09, 8 August 2009 (UTC)
- Naturally, if we neglect friction, the torque onto the pedals of a bicycle needed to drive it forward with a specified force is dependent on just the gear ratio. However, the torque is transferred to tension in the chain and that is inversely proportional to the radius of a gear. Hence, to save the chain it's best to use preferably large cogwheels, as then both the tension and the bending of the chain are minimum. — Pt (T) 02:39, 8 August 2009 (UTC)
- Friction, however, does play a small but noticeable role at the margins, a percentage point or two according to the books I've read on the topic. IN a nutshell, the straighter your chain, the lower the friction; not only does this marginally reduce your pedaling effort, but it also reduces the wear on your chain.--Robert Merkel (talk) 23:09, 10 August 2009 (UTC)
conservation of momentum and heat
Does a system gain momentum when it absorbs blackbody radiation, or when it emits it? Thus even though photons are massless, are they potentially carriers of momentum? (This was never covered in AP Physics really...) John Riemann Soong (talk) 08:41, 7 August 2009 (UTC)
Yes, photons carry momentum (despite their rest mass being exactely zero, the classical formula p=m*v does not hold here). Yes, systems absorbing or emitting electromagnetic radiation in a non-uniform way will gain or lose momentum.
See http://en.wikipedia.org/wiki/Photon#Physical_properties
- See also radiation pressure and the Nichols radiometer, which can measure the force imparted by a light beam. AlmostReadytoFly (talk) 10:16, 7 August 2009 (UTC)
- Doesn't this mean the Earth is actually gaining and losing momentum just through radiation alone...? Or is it assumed that global net radiation flux (Rnet?) is zero? John Riemann Soong (talk) 11:12, 7 August 2009 (UTC)
- It's pretty close to zero, yes. If it were not, it's difficult to see how the Earth could remain habitable over millions of years. Although photons don't have rest mass, they do carry energy. The formula gives the relationship between these quantities, where is momentum.--Leon (talk) 11:27, 7 August 2009 (UTC)
- Well, I mean, does Rnet account for photosynthesis? So all those plant sugars and fossil fuels ... are actually carriers of momentum? It's strange cuz in high school (AP Physics C) they always told me, that excepting tiny particles colliding with the Earth, or asteroids, that as far as momentum was concerned, we could treat Earth as a closed system, with no mention of light as a bearer of momentum.
- Momentum ain't energy! Momentum isn't really "stored" per se, and whilst the momentum of the Earth would be changed by this, the momentum of the Earth--bomb system would be constant. But you would be converting energy from one form to another. --Leon (talk) 12:31, 7 August 2009 (UTC)
- I also remember solving a few problems about conservation of momentum on a system composed of bound protons and neutrons...(yeah a nucleus). The nucleus underwent nuclear decay, ejecting various daughter nuclei. Since the original nucleus was at rest to begin with, we used this condition to solve for the velocities and masses of some of the daughter nuclei (being given the mass of the original nucleus and the masses and velocities of some of the other nuclei, etc.). Thankfully, the problem was in 2D ... I don't think I could have done it in 3 dimensions without some serious linear algebra. Anyway, I'm wondering whether the methodology is necessarily valid, since 1) gamma radiation is likely to be emitted nonuniformly 2) since fission energy is being converted into kinetic energy, why should the total momentum of the system be still zero? John Riemann Soong (talk) 12:02, 7 August 2009 (UTC)
- It's a law of physics that momentum is always conserved. However, kinetic energy needn't be. If bombs are detonated as you describe, the kinetic energy of component parts is increased, but the momentum isn't. Remember, momentum is a vector quantity and if you add up those vectors the result doesn't change. Kinetic energy is scalar, and is proportional to v squared not v. --Leon (talk) 12:31, 7 August 2009 (UTC)
- Wait a minute - if light is converted to stored energy through photosynthesis there's no impulse (change of momentum) on the body (tree/plant) it acts on - if there was then the energy would be dissapated as kinetic energy - but it's not - it's stored as chemical energy. - a momentum change would need the light to be reflected.
- As for the bomb - yes, think so.83.100.250.79 (talk) 12:08, 7 August 2009 (UTC)
- No, a momentum change does not need light to be reflected. Though a certain amount of reflection does occur, incidentally. And there is some impulse on the plant! --Leon (talk) 12:31, 7 August 2009 (UTC)
- Well yeah, it's the electrons that gain energy, with the potential to transfer momentum later on? John Riemann Soong (talk) 12:22, 7 August 2009 (UTC)
- Yes
- (edit conflict)The force on the earth due to light reflection is ~ 50 mega newtons (assuming intensity of 920W/m2 [[1]], albedo of 30%, radius of earth = 3x106m , p=E/c , F=dp/dt )83.100.250.79 (talk) 12:29, 7 August 2009 (UTC)
- That's the same as 100 British Rail Class 59 trains pulling together.
- Mass of earth ~ 5x10^24kg , F=ma so a= F/m a=5x10^7N / 5x10^24kg = 10^-17 m/s2
- change in velocity due to acceleration =at . 1year = ~3x10^7 seconds
- So increase in outward velocity of earth in 1 year would be 3x10^7 x 10^-17 = 3x10^-10m/s - quite small..83.100.250.79 (talk) 12:35, 7 August 2009 (UTC)
- Hmm, but now take billions of years of cyanobacteria and fossil fuel formation ... also I ask about photosynthesis because it's basically a sort of energy sink, allowing Earth to reach thermal equilibrium while actually stockpiling energy. Thus even if no reflection occurs, the system of Earth's atoms has arguably gained momentum, hasn't it? Also, I assume things like angular momentum, axial tilt, and other planetary parameters could be more sensitive? (Though still not very sensitive to anything man-made ... but I am wondering about variation over long periods of years, after accounting for things like tidal lock effects and such.) John Riemann Soong (talk) 12:45, 7 August 2009 (UTC)
- Not really momentum - they have gained energy. If you say convert carbon dioxide and water into sugar (increase in energy) there's no real increase in classical momentum.83.100.250.79 (talk) 12:57, 7 August 2009 (UTC)
- Indeed, the earth absorbs more momentum by reflecting and/or absorbing photons on the dayside than is radiated away by thermal radiation on the nightside. The photons exert a tiny net force away from the sun. Gravity exerts a force towards the sun. The net effect is a tiny decrease of the force keeping the earth in its orbit, as if the sun were slightly less massive than it actually is. For orbiting dust particles and solar sails, the radiation pressure is comparable to or larger than the gravitational force due to the sun, and the orbits of these things are significantly different from purely gravitational orbits.
- Hmm, but now take billions of years of cyanobacteria and fossil fuel formation ... also I ask about photosynthesis because it's basically a sort of energy sink, allowing Earth to reach thermal equilibrium while actually stockpiling energy. Thus even if no reflection occurs, the system of Earth's atoms has arguably gained momentum, hasn't it? Also, I assume things like angular momentum, axial tilt, and other planetary parameters could be more sensitive? (Though still not very sensitive to anything man-made ... but I am wondering about variation over long periods of years, after accounting for things like tidal lock effects and such.) John Riemann Soong (talk) 12:45, 7 August 2009 (UTC)
Bullets fired in the air returning to ground
When live bullets are fired into the air (9 gun salute e.g.) are the falling bullets just as deadly as usual, or do they burn up or something? Are blanks used in these kind of displays? —Stanstaple (talk) 17:45, 7 August 2009 (UTC)
- It depends on the trajectory of the bullets. If fired at an angle, the bullets can maintain their spin and lethality -- there are many documented cases. If fired strictly vertically, the bullets lose their spin and fall at a much slower speed. The MythBusters covered this in some detail a few years back. As for whether blanks are used in x-gun salutes: it depends on who's doing it. — Lomn 17:52, 7 August 2009 (UTC)
- Depends how massive the bullets are. If you use cannon, you might want blanks. If you're dealing with a lighter object like a bullet, you should be familiar with the concept of terminal velocity because of air resistance. Bulkier objects tend to have a larger mass / surface area ratio (due to geometric trends). John Riemann Soong (talk) 17:53, 7 August 2009 (UTC)
- Of course! For some reason i'd never figured in the effects of wind resistance- Firing a bullet into the air would be akin to droping the bullet from the apex- makes sense when you think about it- thanks again. —Preceding unsigned comment added by Stanstaple (talk • contribs) 18:59, 7 August 2009 (UTC)
- Not quite. If you read the article careful enough, it all depends on whether the bullet keeps its spin or not. If it does, just the terminal velocity after the fall can be fatal. If, however, it starts tumbling on the way down, it will fall to earth harmlessly. Seems whether it will tumble or not is very hard to predict.195.128.250.139 (talk) 21:18, 7 August 2009 (UTC)
- Of course! For some reason i'd never figured in the effects of wind resistance- Firing a bullet into the air would be akin to droping the bullet from the apex- makes sense when you think about it- thanks again. —Preceding unsigned comment added by Stanstaple (talk • contribs) 18:59, 7 August 2009 (UTC)
- There's a saying in Russian (and in Serbo-Croatian too), "Even when you shoot into the air, the bullets still fall on someone's head". 98.234.126.251 (talk) 22:32, 7 August 2009 (UTC)
- I like the "Bullets are not greeting cards. Celebrate without firearms" slogan from Macedonia. I wonder - are the people who fire off their guns in joy the same kind of people who shoot their TV set when their football team loses, or shoot their monitor when their PC crashes? --Kurt Shaped Box (talk) 23:00, 7 August 2009 (UTC)
- No, no, no! Be VERY careful how you answer this question. Shooting a gun into the air is lethally dangerous - period. Unless you shoot it pretty much exactly vertically - it will have considerably more velocity when it finally comes to earth than if you dropped it from the maximum height it achieves. You can imagine the horizontal and vertical velocities of the bullet as entirely separate things. If you shoot a bullet horizontally (eg if there was no gravity) then only air resistance slows it down - and not by very much...the bullet is (predictably) lethal. When you fire it vertically, it travels to the apex, gradually slowing down because of gravity and wind resistance - and then stops - and falls back to earth with gravity accellerating it and air resistance slowing it down. Because of the air resistance, the bullet is travelling more slowly when it hits the ground than when you fired it. The terminal velocity of a spinning bullet is pretty fast - because they are fairly aerodynamic - and quite heavy for their cross-sectional area...but when the bullet is fired vertically, it slows to a stop and has to flip over...it loses the spin that keeps it stable in flight - and one the way back down again it's tumbling randomly - which introduces a lot more drag and slows it down quite a bit. A bullet that fell back on you would hurt quite a bit - but it wouldn't kill you. Mythbusters found them buried in a couple of inches of dirt. But what gets complicated (and VERY dangerous) is when you fire the bullet at an angle - not quite vertical. The horizontal component of the motion isn't slowed down by gravity at all - and that allows the bullet to keep its spin - so as it goes over the top of the arc, it stays nicely pointed into the airflow - wind resistance hardly slows it down at all and it remains completely lethal - exactly as lethal as if you'd fired it in a straight line over the same total distance. The precise angle at which the spin of the bullet turns into a tumble and it becomes much safer is unknown and would certainly depend on the initial muzzle velocity, the precise shape of the bullet and a whole bunch of aerodynamic complications. However, it is very safe to say that if you fire a bullet into the air - you could quite easily kill someone. There are PLENTY of well-documented cases of innocent people who have been killed and injured by stray bullets at celebrations where people shoot guns into the air. Please don't let anyone convince you otherwise...most of them are oversimplifying a complicated aerodynamic situation. They simply don't understand what's going on in enough detail to explain the problem - so they claim to "know" that it's safe - which it patent nonsense given the number of documented cases of people dying.
- Shooting blanks is obviously safer - but even so, there have been people killed by blank rounds too - blank rounds are far from "safe".
- Paradoxically, if you were going to fire off your AK-47 in celebration of <whatever>, aiming it straight up in the air would seem like one of the most stupid things that anyone could possibly do... --Kurt Shaped Box (talk) 22:56, 7 August 2009 (UTC)
- Yep - ironically, perfectly vertically is the safest...(well, safest for humanity in general...perhaps not safest for you personally!) But that requires much more faith in aerodynamics than most people have! The Mythbusters tried quite hard to fire their guns perfectly vertically - but the bullets still landed hundreds of feet away. SteveBaker (talk) 02:59, 8 August 2009 (UTC)
in short bullets shot up into the air do fall down but are less deadly but unlike being fired they are limited to their terminal veliocity
Space-filling models software
Hello, I am looking for free software that allows me to generate atomic and molecular space-filling models. Do you know of any? Thank you. Leptictidium (mt) 20:33, 7 August 2009 (UTC)
- try browsing Category:Molecular modelling software for free ones that do what you want.83.100.250.79 (talk) 21:26, 7 August 2009 (UTC)
Nipping out buds of tomatoes
I'm growing some tomato plants. I've read a few times that it helps to remove some of the buds on the plant - could anyone clarify what you are supposed to do please? And is doing this truelly worthwile, or just a myth? I happened to see on tv about farmers growing thousands of tomatoes in a big field. I doubt they do any bud nipping, but also they do not support the plants at all - is supporting the plants and trusses necessary? 78.146.176.224 (talk) 21:09, 7 August 2009 (UTC)
- The process of removing the buds/side shoots of tomatoes is called "suckering" (at least that's what I learned it as). The thought is to remove growth that will never amount to much, and get the plant to put that energy into flowering and fruiting. The Wikipedia article isn't too applicable, but if you search the web for "suckering tomatoes" (or similar), you should get a number of sites which discuss it. The reason you stake/cadge tomatoes is to keep the fruit off the ground, and to allow it to dry out more thoroughly. Tomatoes are particularly susceptible to diseases especially fungal ones, such as verticillium wilt and fusarium wilt. Commercial farmers don't prune or stake because it's very labor intensive, and labor is costly. It's cheaper/more efficient to just grow more plants, spray with fungicides, and hope for the best. The analysis is different with a backyard gardener, though. The labor expenditure is not as high with just half a dozen plants, and you'll get a much larger crop. -- 76.201.158.47 (talk) 14:57, 8 August 2009 (UTC)
I have previously grown tomatos only in grow-bags, when the thin stalks do need tying to supports to stop them bending to the ground with the weight of the toms. This year I have grown them in soil for the first time - and I have been surprised to see how thick the stems are, like minature trees. Hopefully they will not need tying to supports. The variety used was Money Maker I think. 78.147.132.206 (talk) 11:52, 13 August 2009 (UTC)
power leakage
Is it true that power leaks away when, for example, a phone charger is left plugged in without the phone? How does this happen? How much energy is wasted? --Halcatalyst (talk) 22:10, 7 August 2009 (UTC)
- Even the best phone chargers waste some energy - even if they are not connected to anything - they're mostly better than 90% efficient, and probably waste even less when not charging.
- Basically they are Switched-mode power supplys - a type of electronic device - they need some electrical energy to keep ticking over, about the same as an electric clock.83.100.250.79 (talk) 22:23, 7 August 2009 (UTC)
- Well, the power doesn't "leak" out of the end of the wire...that's a common fallacy. (If it did, every power socket in your house without something plugged into it would be "leaking" too!) However, because a charger is a transformer - which has a coil of wire on the wall-socket side of things, there could be a VERY tiny amount of current consumed - which would appear as a small amount of heat being emitted by the charger. But unless the charger has an LED on it that's lit up to show that it's plugged in - I think the amount of energy wasted is very small indeed. If you are looking for places where electricity is being uselessly consumed, consider things like TV sets which can be "turned on" with a remote. Anything that can be turned on and off with a remote has to have some circuitry running in order to detect the signal coming from the remote. So when you turn off your TV/DVD/Satellitebox/etc - it's not REALLY being turned off - it's just turning off most of it's functions and hopefully saving energy. However, nothing short of unplugging such devices will truly get them "turned off" completely. SteveBaker (talk) 22:24, 7 August 2009 (UTC)
- I've heard wall warts (transformers) tend to take significant amounts of energy even if nothings plugged in. I think the good ones have a way of telling if something is plugged in, and disconnect the circuit nothing is. I know from experience that I have at least one wall wart that tends to get warm if you leave it plugged in, even if the device it's connected to is off. — DanielLC 04:16, 8 August 2009 (UTC)
- Cecil Adams did a column on this here. He found the the idea that wall-warts wasted huge amounts of energy was mostly a myth. APL (talk) 04:47, 8 August 2009 (UTC)
- Since the wasted electricity is converted to heat, you can get a good qualitative idea of the wastage by simply placing you hand on the charger. For chargers of the same physical size, a warmer charger is wasting more heat. A power dissipation as low as one watt will make a charger-sized object quite warm. My two-watt Sheevaplug feels much warmer than the (much smaller) telephone chargers sitting next to it, so I infer that they are each consuming very much less than one watt. I can save more energy by turning off my computer monitor for five minutes than by turning off all my chargers for one day. -Arch dude (talk) 15:30, 8 August 2009 (UTC)
Surgery recovery time
Suppose someone has had surgery for eye injuries due to a shotgun backfire (see the science ref desk archives section "Shotgun backfiring"), and also for multiple bone fractures and lacerations due to being mauled by a bear. How long must the patient stay in one place before he can be evacuated by plane? Also, how likely is he to have complications that would require follow-up surgery? (No, this ain't no medical advice, it's for my story again.) Thanks in advance! 98.234.126.251 (talk) 22:59, 7 August 2009 (UTC)
- Too many unknowns to make a definitive decision. The main fulcrum of the decision to move the patient would be the need for improved care against the possibility of damage caused by the evacuation. Helicopters are frequently used to move seriously injured individuals. What sort of plane had you in mind? A small single engined plane that did not ascend to altitude would OK for early evacuation. IMHO. 86.4.181.14 (talk) 07:24, 8 August 2009 (UTC)
- The plane I had in mind was that same Queen Air that had to land in a 15-knot crosswind (see the section "Crosswind landing"), but the pilot knows that there's a surgery patient on board, so she flies low and does her level best to avoid any turbulence. What I wanted to know is, how soon before it's safe to even move the patient? Assume that he had to have (1) the splinters taken out of the scleras and corneas of both his eyes, (2) small tears in both irises repaired, (3) blood drained from inside both eyeballs, (4) a SMALL part of the vitreous humor taken out to remove dried blood, (5) compound-comminuted fractures in both forearms cleaned, aligned, and fixed in position, (6) simple fractures of the ribs repaired, and (7) lacerations sutured on face and body. (Quite a list, huh?) 98.234.126.251 (talk) 10:13, 8 August 2009 (UTC)
- That bear must have been fairly close to a largish city, for that level of surgical help to be available to your victim. So why does he have to be moved? If it happens in the back of nowhere, then he'd just have pressure bandages applied to stop bleeding, splints applied to stop the bones moving (possibly those inflatable splints carried by ambulances) and then he'd be evacuated to a place with a large enough hospital to do the actual surgery.
- Once he's had the surgery he could be safely moved immediately, by road or air transport, as long as his IV drips go with him. It would be no different than being wheeled through 2 hospital buildings to get from the operating theatre to his ward. But if he had the full surgery close to where the incident happened, why move him?
- If moving him is a necessary part of the story, you either need a compelling non-medical reason for moving him, or he'd only be able to get basic first-aid at the scene and need evacuation to be able to get the surgery.- KoolerStill (talk) 14:28, 8 August 2009 (UTC)
- Ah, but that's not how the story goes. The story is, at the time that he's got hurt, he's trapped on an island in the Canadian Arctic so they can't evacuate him to a hospital. They can't get to the island by sea or over the ice because the ice is just starting to break up, and the weather is so bad that the Canadian chopper pilots are afraid to fly to the island. The Americans are willing to send help, though, but the island is out of range of American choppers, so they can only get there by plane (the aforementioned Queen Air). Unfortunately the island ain't got no airstrip (only a helipad) and landing on the ice is impossible due to the ice breaking up. And obviously with these kinds of injuries the poor guy needs surgery (not just splints and pressure bandages) within 24 hours at the very most or he could very well be maimed for the rest of his life. So what they do is they drop the surgeon on the island by parachute so he can do the surgery in the field, and then later on when the ice breaks up completely they evacuate him by boat and then by plane so he can get follow-up surgery if necessary. As a matter of fact, I got the story line from the poem "Ice Island" by the Russian poet Samuel Marshak, which was written back in the late '40s, before choppers were in widespread use, so I had to take some creative latitude to make sure that the new technologies are unavailable (I also moved the setting from the Russian Arctic to the Canadian Arctic, and added a love story between the surgeon and the pilot). By the way, thanks for answering my question about how soon it's safe to move the patient -- I see now that I won't have to rewrite that part at all. 98.234.126.251 (talk) 21:13, 8 August 2009 (UTC)
- Okay, that surgeon is not going to have an operating theatre at his disposal, nor x-rays to see the broken bones, nor an anesthetist, nor proper aseptic conditions. So he can stitch the worst surface wounds where there are no underlying fractures, remove the shrapnel from the eyes to save the victim's sight (to stop further damage from the eyes moving); then splint him up for evacuation. The compound fractures would take many hours of surgery, pins etc to set, which he won't have the equipment for. And which he'd normally have 3 or 4 assistants for, at least. Those would need to be done at a proper hospital. He'd be okay for several days without the bones being set, as long as he is splinted (to prevent painful movement) and has painkillers and an IV going (for hydration and anti-biotics). Seeing you have a lot of ice, consider using a sled rather than a boat. How does this guy call for help in the first place? - KoolerStill (talk) 22:50, 8 August 2009 (UTC)
- Ah, but that's not how the story goes. The story is, at the time that he's got hurt, he's trapped on an island in the Canadian Arctic so they can't evacuate him to a hospital. They can't get to the island by sea or over the ice because the ice is just starting to break up, and the weather is so bad that the Canadian chopper pilots are afraid to fly to the island. The Americans are willing to send help, though, but the island is out of range of American choppers, so they can only get there by plane (the aforementioned Queen Air). Unfortunately the island ain't got no airstrip (only a helipad) and landing on the ice is impossible due to the ice breaking up. And obviously with these kinds of injuries the poor guy needs surgery (not just splints and pressure bandages) within 24 hours at the very most or he could very well be maimed for the rest of his life. So what they do is they drop the surgeon on the island by parachute so he can do the surgery in the field, and then later on when the ice breaks up completely they evacuate him by boat and then by plane so he can get follow-up surgery if necessary. As a matter of fact, I got the story line from the poem "Ice Island" by the Russian poet Samuel Marshak, which was written back in the late '40s, before choppers were in widespread use, so I had to take some creative latitude to make sure that the new technologies are unavailable (I also moved the setting from the Russian Arctic to the Canadian Arctic, and added a love story between the surgeon and the pilot). By the way, thanks for answering my question about how soon it's safe to move the patient -- I see now that I won't have to rewrite that part at all. 98.234.126.251 (talk) 21:13, 8 August 2009 (UTC)
How can I tell if a martial arts school is crap?
I know to avoid the ones that guarantee that you'll become a black belt in n years (as long as you keep paying every month), or don't actually do any real full-contact sparring against a resisting opponent, tell you that they'll teach you to be able to beat up six guys at once - every time, or claim ninja movie rubbish like that they have 'ancient secret high-level techniques' that will allow you to kill people with one punch, or levitate/teleport/become invisible using chi magic, or throw fireballs, or move fast enough to catch bullets, etc.
But what else should I look out for, as a newb, before I sign up for training that might be generally poor and ineffective? Sorry if this is in the wrong place, but I think that MA is a sort of science. Wasn't exactly sure where to put my Q. --84.69.218.212 (talk) 23:25, 7 August 2009 (UTC)
It's not really a 'science' in the usual sense of what questions are posted here, but here goes: Word of mouth is wonderful for things such as these, similarly if you can find more about local tournaments then you'll maybe find which 'schools' teach the top performers in your area (a-la Karate Kid). Perhaps find a few local ones and ask if they'd let you come and watch in on a session - most will be receptive if they know you're seriously considering joining. ny156uk (talk) 23:35, 7 August 2009 (UTC)
Well, as a karate brown belt, I'd say that you should seek out a martial arts school that first puts an emphasis on teaching the right moves so that you do them right every time, and then, once you learn the techniques, incorporate them into one-on-one full-contact sparring with your fellow students. It's also highly desirable that the instructor should take the time to personally demonstrate the martial arts techniques to the students, and explain or demonstrate what (if anything) they're doing wrong. It's also generally (but not always) true that small MA schools offer better quality training than bigger ones. And last but not least, if within a reasonable amount of time (say a year or so) you don't see your technique improving in perceptible terms, then you should consider changing your MA school. There might be other considerations too, but I can't think of them off the top of my head. 98.234.126.251 (talk) 23:44, 7 August 2009 (UTC)
- It's also a good idea to talk to your teacher and ask him who he trained under - then look him/them up. Beware of the guys who claim to be the only non Chinese/Japanese/Korean/Tibetan/etc. person to ever train in the style (which he learnt after living and fighting alongside Far-Eastern monks/ninjas/mobsters/etc.) - which, of course, no-one else will have ever heard of, because it's so secret and deadly. More than likely, he trained to the point of 'not being rubbish' in something else, watched some instructional DVDs in a couple more MAs, then founded his own made-up MA using all the coolest-looking moves and made himself grandmaster. Likewise, avoid the 'former SAS/MI5/black ops guy' - people who've done that don't talk about it, especially not to sell 'how to kill people on the street with your bare hands' classes out of their garages to teenagers. It should be common sense - but for some reason, a lot of people seem to fall for this Walter Mitty crap when it comes to MAs. There was a guy putting flyers about in my town a couple of years ago, claiming SAS (secret, BATTLEFIELD-PROVEN commando techniques FAR TOO DEADLY to be taught at regular MA classes, etc.) - with the caveat "HARDCORE people ONLY! No women, children or time wasters!" at the bottom. You can guarantee that some people saw those and thought "FUCKIN A! I'M THERE!" --Kurt Shaped Box (talk) 18:59, 8 August 2009 (UTC)
Why not invite the instructors to a no holds barred fighting competition? The winner will be the best fighter and likely the best instructor. Marcus Greene (talk) 23:49, 7 August 2009 (UTC)
- I find your second statement unlikely. Many people who are good at something are not great teachers. Many great teachers are not the best at their subject. While I'm primarily thinking of academic teachers here, I don't see why this won't apply to martial arts as well. Indeed if we consider sports, the best coaches were often not the best players, and the best players often fail as coaches. Of course a more significant fact is that I don't see any evidence the OP is particularly interested in learning no hold barred fighting and most importantly, unless you happen to have a large amount of money, the chance you a prospective student will convince many instructors to get involved in such a thing is slim Nil Einne (talk) 09:43, 8 August 2009 (UTC)
We have an article about a bogo-martial-art debunking website, bullshido.net. 70.90.174.101 (talk) 01:26, 8 August 2009 (UTC)
In my 30+ years of martial arts (several art forms to keep me well rounded), I would suggest that you watch the instructor(s) and see how they teach. Are they respectful to the students? Do they bully them? Are they good with both children and adults? What are their credentials (e.g. one of my Senseis is a member of Karate Ontario as well as associations in Japan and the US). One can easily check the vaildity of any Association (like Karate Ontario) via the web and then check out the instructor via the Association). I have had instructors who were very good fighters in tournaments but on the street were useless. I have had instructors who were good all around fighters but could not teach if their life depended on it! A few years ago, my instructor asked me to teach the children's class because he didn't have the temperment for it. I really respect him for that. Gotta watch the egos as well. Some egos are quite problematic. Is the instructor open to learning from anyone? I take the stance that I can learn from anyone if I take the time to learn (I learned a lot even from the children I taught).
Also, keep in mind that different martial arts have different emphasis: karate was developed in Japan and Okinawa to mee the needs of the people there. Karate has an older history/tradition than Aidido (also Japaneese)but not as long a Kunf Fu. By contrast, Krav Maga is an Israeli fighting art that places a very different emphasis on self-defense than does karate, kung fu, tae kwon do or even boxing.
What do you want to get out of a martial art? Shop around and don't be pressured into anything that your gut says to be wary of. —Preceding unsigned comment added by 216.154.17.222 (talk) 19:18, 9 August 2009 (UTC)
- At the risk of making an obvious statement - an instructor who acts like Pei Mei around his students is probably more a common-or-garden asshole than a learned martial arts master. One who talks like Master Po is probably just pretentious. You don't need to learn from guys like that to be good. --Kurt Shaped Box (talk) 23:00, 9 August 2009 (UTC)
- Who??? Are you referring to this Pei Mei? Nil Einne (talk) 17:07, 10 August 2009 (UTC)
- Na, I was talking about this *Pai* Mei. Damn my tyops. --Kurt Shaped Box (talk) 23:27, 10 August 2009 (UTC)
I'd like to emphasize 216.154.17.222's point above; you need to consider what you want to get out of training. Are you looking for a cardio workout? Muay thai can sure give you that. Want to improve flexibility? Many forms of Chinese martial arts (i.e. "kung fu") place a heavy emphasis on that. If you really get into it, it can be a huge time and money investment, so shop around. If you just want to kick someone ass, try Homer Simpson's advice: "First, you gotta shriek like a woman, till he turns away in disgust. That's when it's time to kick some back! Then, when he's lyin' on the ground, kick him in the ribs, step on his neck, run like hell." Matt Deres (talk) 14:03, 10 August 2009 (UTC)
Lead lined coffins
I recently saw a TV programme where a scientist said that he had seen a woman's body who had been buried in a lead lined coffin for 200 year and yet he could still tell that her eyes were blue. Is that level of preservation really possible? Would the body have had to been subject to some other preservation? In the same programme they exhumed Mark Sykes and were able to obtain lung tissue after 90 year (even though his lead coffin was split) so I guess it is not impossible that sure amazing preservation can take place. This article on Snopes suggest that an air tight container wouldn't preserve a body very well, without other preservation techniques being used. If somebody eye colour was preserved for 200 years, I would have thought that they would be in pretty good shape for at least the first few years. Are Snopes wrong? Would lead preserve a body better than an air tight casket made of another material? Bury me in a Y shaped coffin (talk) 23:36, 7 August 2009 (UTC)
- Lead lined coffins are expensive, and person buried in them may have also been heavily embalmed - meaning that they are preserved longer.
- However, all a lead lined coffin does is prevent worms etc getting to the body - it still will decompose - into a "grave liquor" (aka "coffin liquor" "human soup") - this is well known to archaeologists, and grave diggers who have to exhume remains from old grave yards.
- http://www.hpa.org.uk/CDR/archives/CDRreview/1995/cdrr0595.pdf
Completely preserved bodies have been found in wooden coffins buried in the ground and completely decayed bodies in apparently intact lead coffins in crypts. Most lead coffins contain dry bones but some are found to be about one third full of a viscous black liquid (coffin liquor), which contains bones and (sometimes) soft tissues. Well preserved, partially mummified bodies are sometimes found and, very rarely, intact and totally preserved bodies are found that are not even discoloured. (Copyrighted PHLS 1995)
- Any bacteria sealed inside any coffin (lead, glass, stainless steel etc) will get to work, provided that they can operate in the absence of air. So just sealing isn't the answer.83.100.250.79 (talk) 16:20, 8 August 2009 (UTC)
- A sealed vessel, plus something to stop the bacteria is needed. 83.100.250.79 (talk) 16:24, 8 August 2009 (UTC)
- When the lead coffins of candidates for sainthood are opened, it is reported that some are better preserved than others[2]. Preservation is a positive mark towards beatification. The rank ones on their way to decay are said to be "walking." Edison (talk) 19:26, 8 August 2009 (UTC)
- Thanks, an interesting example. Do you know if Saint Bernadette's body underwent some kind of preservation treatment before being buried? It sounds as if she was almost completely preserved for 30 years after death, and pretty well preserved at least 20 years after that. Bury me in a Y shaped coffin (talk) 20:14, 8 August 2009 (UTC)
- As I understand it no - it's considered to be just a miracle. It's worth noting that the parts 'on display' the head and hands are actually wax. see Bernadette Soubirous#exhumations —Preceding unsigned comment added by 83.100.250.79 (talk) 20:34, 8 August 2009 (UTC)
- Thanks, an interesting example. Do you know if Saint Bernadette's body underwent some kind of preservation treatment before being buried? It sounds as if she was almost completely preserved for 30 years after death, and pretty well preserved at least 20 years after that. Bury me in a Y shaped coffin (talk) 20:14, 8 August 2009 (UTC)
Is the mind software or hardware?
I have been wondering whether if the electrical activity in the brain stopped just for a split second and was then restored, would your "mind" still be there? (I imagine that "mind" is a concept that is a can of worms, but basically would all of your memory and mental faculties be in tact). I guess that it is a bit like a PC, in that if you turn it off and then back on, the hardware is still there and so is the data on the hard drive, but any running software is gone. So is the mind software or hardware? Has anybody ever recovered from a complete cessation of electrical activity in the brain? Bury me in a Y shaped coffin (talk) 23:46, 7 August 2009 (UTC)
- I think the important question here is how is memory physically stored in the brain? Is it some chemical or electrical state that needs to be actively maintained like RAM, is it more physical changes in the ways the neurons behave like hard disk storage, or is it physical changes in the way the neurons are linked together like chip architecture. I have no expertise in neuroscience, but I think the answer is first that it's not all that well understood, and second it's probably a combination of a lot of these things. There seems to be a fair bit of information on Wikipedia about this stuff although I'm not really sure where a good place to start is. The memory article talks about the different kinds of memory. I think it's safe to assume that sensory memory (which lasts less than half a second) is probably not facilitated by any permanent physical changes in the brain. Meanwhile neuroplasticity talks about how the brain can over time rewire itself in response to experiences. Rckrone (talk) 00:45, 8 August 2009 (UTC)
- It would take a library to address all of the issues you brought up so let's grimace and push those aside. I think the core of what you're asking is "are pathways hard-coded in physical structures, or are they volatile?" It's a tough question. The brain isn't a digital circuit, it's chemical. Neurotransmitters metabolize, unused enzymes build up or break down.. The problem is, brains don't just stop working for a split second. The chemicals that are there are ionized and produce current.. how do you plan to neutralize them? Are they just going to disappear? Well they're critical to the functioning of the brain.. you might as well have asked whether a bullet ripped through your skull for just a split second would cause permanent damage. .froth. (talk) 01:41, 8 August 2009 (UTC)
- Electroconvulsive therapy rather thoroughly disrupts normal brain functioning for a fraction of a second, which is fairly similar to what you are asking. There is a lot of electrical activity going on in that case, unlike none as in your question, but the electrical activity that’s going on during that instant is a far cry from what would normally be happening in the brain. The immediate short-term effects of electroconvulsive therapy are confusion and loss of short-term memory, but the confusion goes away, and long-term memories are largely retained. Red Act (talk) 02:39, 8 August 2009 (UTC)
- As best we understand it (which is not great), long term memory is in 'hardware' - hard connections that grow between neurons. Short term memory is 'software' - electrical signals circulating around the brain that holds the information until neural connections can fill in and make the memory "permenant". This is kinda backed up by the fact that people who have accidents and lose consciousness often lose all memory of the incident - presumably because the software short term memory disappears (just like losing RAM memory in your computer if you turn it off). SteveBaker (talk) 02:50, 8 August 2009 (UTC)
- Try mind, electroencephalogram, coma, and brain death. When awake, the brain always has electrical activity, there's no such thing as electrical activity stopping for a "split second." During anesthesia, loss of consciousness can be associated with a flatline on EEG (though this may be more reflective of the limited sensitivity of EEG as opposed to actual complete electrical inactivity). When brought back to consciousness, the "mind" is unaltered. Complete loss of electrical activity on EEG is sometimes used as a criteria for determining brain death. The brain death article references the case of a man who was declared "brain dead" but later recovered. The references cited in the article indicate that he had no cerebral metabolism on positron emission tomography scan shortly after an injury, though this is not quite the same thing as declaring that there is no electrical activity. He apparently remembers hearing the doctors say that he was dead, so presumably his short term memory (and therefore electrical activity) were working normally. As a hand-waving answer to your questions, it seems as though the brain structures (hardware) are what enable the mind (software) to run and that memories can be written to short-term RAM (as with SteveBaker's analogy) or long-term ROM to be accessed by the mind when needed. --- Medical geneticist (talk) 03:22, 8 August 2009 (UTC)
Thanks to everyone for the input, I have been reading around this subject a bit (including the articles suggested above), I have also found the following of interest: Information-theoretic death and Cryonics#Premises_of_cryonics. Bury me in a Y shaped coffin (talk) 09:53, 8 August 2009 (UTC)
- As I think of it, the 'brain' is the hardware (like RAM, hard drive) but 'mind' is software. When we first 'boot up', most mental activity is crude ... but as the hardware gets more input, chemical pathways are established that eventually causes 'mind' - or self-awareness at least - to pop into existence.
Most people aren't conscious of the first few years of their life. Perhaps that is the period before the 'ignition' of mind. At that moment we become aware of the existence of our memories.
Primitive software, like machine language, then assembly language, is still very close to the hardware. But as time goes by, the software is increasingly abstracted from the hardware. Scripting languages are very far away from the underlying hardware. Clearly the software could rise to higher and higher levels of abstraction, while still running on the same hardware. It could be the same way with mind.
What does the program consist of in a computer? A varying pattern of energy levels spread across many transistors. Is the *pattern* made of electrons? No. It is the changing relationship between the electrons!! Which weighs nothing ... it's a complete abstraction! Yet, the program 'works' ... and so does the mind.
Certainly the mind 'ceases running' when the brain is badly damaged. But, like the program, the mind never tangibly existed. So in some sense, it never goes away. Twang (talk) 09:06, 9 August 2009 (UTC)
- I don't buy "ignition", if you mean a discrete moment when a child's mind fundamentally changes. I don't remember any events at age 3, but I believe I did remember them when I was 4 (the time of my oldest accessible memories). My guess: as we learn how to learn, our internal language develops, and eventually the encoding of new memories is no longer compatible with that of the oldest memories — but there's no transition, just as (we assume) there was no sharp transition between Latin and modern Spanish. —Tamfang (talk) 04:26, 11 August 2009 (UTC)
- 'Ignition' may not have been the best choice of words (is 'launch' better?). Because there's a period 'before' without recoverable memories and a period 'after' with recoverable memories, there must be a threshold. It may not matter whether it's quick or not. Is this experience 'private' and ineffable, or could it actually be observed? I don't know of any serious work. (I'm trying to be practical and stay away from metaphysics questions like 'is there mind before there's memory'.)
You may be right: it may be that our personal primitives are slowly massaged into better and better conformity with our sense data without any transition. But I suspect there comes a day for most of us when we first understand that there's an 'I'. That *might* be the day when memory kicks in. Twang (talk) 06:18, 11 August 2009 (UTC)
- 'Ignition' may not have been the best choice of words (is 'launch' better?). Because there's a period 'before' without recoverable memories and a period 'after' with recoverable memories, there must be a threshold. It may not matter whether it's quick or not. Is this experience 'private' and ineffable, or could it actually be observed? I don't know of any serious work. (I'm trying to be practical and stay away from metaphysics questions like 'is there mind before there's memory'.)
- I don't buy "ignition", if you mean a discrete moment when a child's mind fundamentally changes. I don't remember any events at age 3, but I believe I did remember them when I was 4 (the time of my oldest accessible memories). My guess: as we learn how to learn, our internal language develops, and eventually the encoding of new memories is no longer compatible with that of the oldest memories — but there's no transition, just as (we assume) there was no sharp transition between Latin and modern Spanish. —Tamfang (talk) 04:26, 11 August 2009 (UTC)
Complete cessation of brain electrical activity is the standard medical criterion for death. ECT doesn't cause a cessation of electrical activity, only a disruption. In principle it might be possible to cause a very brief cessation, followed by a return to life, by giving a single large DC stimulus -- but it would be a very tricky thing to do. There are some species of animals that can survive freezing, which involves a complete cessation of electrical activity. There are hopes that such a thing might eventually be possible with humans, but it isn't yet.
Most neuroscientists believe that there are two kinds of memory in the brain, long term memory which is encoded by structural changes, and dynamic memory which is encoded by ongoing electrical activity. Disruption of electrical activity, for example by a seizure, would clear the dynamic memory, but leave the long term forms intact. So in the OP's terminology (which is not standard), there are both hardware and software forms of memory -- at least we think there are. Looie496 (talk) 05:05, 11 August 2009 (UTC)
August 8
Ringworm
What causes ringworm to be circular shaped? --jpgordon::==( o ) 00:06, 8 August 2009 (UTC)
- It's a fungal infection. Probably it starts as a tiny dot at the center - as it spreads outwards, the damage it does is being repaired by the victims' body - so you wind up with a circular infected area with a smaller circular healed area in the middle. But that's just a guess...I don't know for sure. SteveBaker (talk) 02:38, 8 August 2009 (UTC)
- That seems to be vaguely confirmed by the literature (it seems the fungus feeds on keratin) - though I can't find an explicit statement of the reason.83.100.250.79 (talk) 15:38, 8 August 2009 (UTC)
- The same principle applies, but not the same effect results, in Fairy Rings. 86.4.181.14 (talk) 07:17, 8 August 2009 (UTC)
- <curmudgeon> Does circular shaped mean something other than circular ? </curmudgeon> —Tamfang (talk) 04:28, 11 August 2009 (UTC)
- In some contexts, yes. A circular argument or a circular definition is quite different from a circular-shaped argument or a circular-shaped definition. In British English, a circular might also be a piece of junk-mail - which might or might not be circular-shaped. SteveBaker (talk) 13:10, 11 August 2009 (UTC)
- Surely circular-shaped means shaped like a circular. —Tamfang (talk) 03:48, 13 November 2023 (UTC)
- In some contexts, yes. A circular argument or a circular definition is quite different from a circular-shaped argument or a circular-shaped definition. In British English, a circular might also be a piece of junk-mail - which might or might not be circular-shaped. SteveBaker (talk) 13:10, 11 August 2009 (UTC)
Negative Matter Superluminal Travel???
Suppose there is Negative Matter. Assume we have a negative positron at position p. When it moves to another position, say k, subluminally external observers may interpret this as an electron moving back in time. Is this counted as superluminal travel? Also, this travel into the past does not violate casualty because the information is sent from future to the present, which affects the future.The Successor of Physics 04:18, 8 August 2009 (UTC)
- What is "Negative Matter"? --Tango (talk) 04:49, 8 August 2009 (UTC)
- Do you mean Antimatter? Mitch Ames (talk) 04:56, 8 August 2009 (UTC)
- Antimatter moves through normal space in the normal way. It does not travel back in time.
- There is no such thing as a "negative positron".
- I don't understand how moving a "negative positron" from one place to the other would be the same as moving an electron back in time.
- If information was sent from the future to the present it would absolutely violate causality as we understand it.
- You might be trying to describe Tachyons. Keep in mind that Tachyons are a hypothetical construct. There is no theoretical or experimental evidence of their existence. APL (talk) 05:29, 8 August 2009 (UTC)
- I think the OP might be talking about Feynman's idea of anti-particles being thought of as their regular counterparts traveling backward through time. It's important to stress that this is just an interpretation used to help intuitively understand what's happening. A given particle exists at various point in time-space, but it's not really meaningful to say that a particle is traveling in one direction along that path or the other. There's also no violation to causality. If we assume determinism in both directions, then the state of the universe at one time determines both the state immediately before and immediately after. The direction of causation is which ever direction we choose to look at things from, so it's not really meaningful to say that in this case events in the future are causing events in the past. It's just a matter of perspective. Rckrone (talk) 05:53, 8 August 2009 (UTC)
- Guys, I think you should take a read on the (redirected, but still) page on Negative matter. It's not the same as antimatter. (One may not exist, while the other certainly does!) -- Aeluwas (talk) 07:36, 8 August 2009 (UTC)
- Thanks, Aeluwas, thats the negative matter I was discussing!
The Successor of Physics13:22, 8 August 2009 (UTC)- "Negative matter" doesn't mean anything to a physicist, the existence of a Wikipedia redirect notwithstanding. It could just as well redirect to antimatter. The anti-positron is the electron, but exotic matter is supposed to be an entirely different kind of matter that has negative mass (and is presumably also different in other ways), so there's no such thing as an exotic positron. I don't think it's true that negative mass going backwards in time would be like positive mass. Mass isn't like charge—there's no symmetry of nature that exchanges positive and negative mass (in the presence of gravity). CPT symmetry swaps positive and negative charge as it reverses the direction of time, but it doesn't swap positive and negative mass. -- BenRG (talk) 16:19, 8 August 2009 (UTC)
- Thanks, Aeluwas, thats the negative matter I was discussing!
- Guys, I think you should take a read on the (redirected, but still) page on Negative matter. It's not the same as antimatter. (One may not exist, while the other certainly does!) -- Aeluwas (talk) 07:36, 8 August 2009 (UTC)
Negative matter has been hypothesised, the fact that it remains unobserved doesn't detract from it status as a hypothesis. Having said that, I would otherwise agree with BenRG that inversion of T is equivalent to inversion of C and P, but no such known symmetry exists for mass. On an ending note, a symmetry that involves the inversion of T does not constitute superluminal travel. The particle is still going forward in time. —Preceding unsigned comment added by 92.8.8.69 (talk) 22:28, 9 August 2009 (UTC)
- Purple dancing interstellar hippo's have also been hypothesised (I just hypothesised them - so I can say this with confidence!) - that doesn't give them any more scientific status than any other hypothesis...including negative matter. Being unobserved certainly doesn't detract from the hippo's status as a hypothesis either. But being a "hypothesis" doesn't confer any kind of meaning onto some vague concept - it's just a fancy term for "a wild-assed idea that someone thought up when they had nothing better to do". The hypothesis of negative matter doesn't appear to solve any problems that physics currently has - there is no proposed experiment that would reveal whether the stuff exists - until or unless one or other of those things becomes true, we can consign this to Occam's razor. Without anything more than a hypothesis - there is no possible way to answer the OP's question...no more than if (s)he had asked whether those hippo's do the tango or the waltz. (Actually, they can-can - but that's another matter). SteveBaker (talk) 14:08, 10 August 2009 (UTC)
- A big difference between hypothetical negative mass and Baker's Hippo Burlesque is that negative mass is actually an interesting mathematical abstraction. Negative mass is something that, even if it doesn't actually exist, can still be examined in theoretical physics, asking "what would happen if this existed?" Abstract mathematical curiosity is in itself interesting and occasionally produces side results that are also practical. Another difference is that negative mass is something that has actually been explored in reliable scientific sources, whereas (far as I know) purple dancing hippos haven't. So the moral is that just because something probably doesn't exist doesn't mean it's not worth exploring the concept hypothetically. 63.95.36.13 (talk) 14:33, 10 August 2009 (UTC)
- Purple dancing interstellar hippo's have also been hypothesised (I just hypothesised them - so I can say this with confidence!) - that doesn't give them any more scientific status than any other hypothesis...including negative matter. Being unobserved certainly doesn't detract from the hippo's status as a hypothesis either. But being a "hypothesis" doesn't confer any kind of meaning onto some vague concept - it's just a fancy term for "a wild-assed idea that someone thought up when they had nothing better to do". The hypothesis of negative matter doesn't appear to solve any problems that physics currently has - there is no proposed experiment that would reveal whether the stuff exists - until or unless one or other of those things becomes true, we can consign this to Occam's razor. Without anything more than a hypothesis - there is no possible way to answer the OP's question...no more than if (s)he had asked whether those hippo's do the tango or the waltz. (Actually, they can-can - but that's another matter). SteveBaker (talk) 14:08, 10 August 2009 (UTC)
slow cooking of pork -- where does all the fat go?
A lot of recipes say the fat "melts" after a long slow roast (or a braising) ... and sure enough, the huge chunk of fat on the pork slowly seems to dissolve; if I'm braising the liquid becomes quite oily. What happens to the fat? Is it broken down into smaller fatty acids (and maybe some of it gets oxidised into CO2 and water?). I also note that we generally use acidic liquids like tomato sauce, fruit juice, beer, or some liquid with a bit of vinegar tossed into it ... does some sort of acid-catalysed elimination reaction occur? John Riemann Soong (talk) 10:35, 8 August 2009 (UTC)
If you're heating triglycerides (i.e. fat) in an acidic aqueous solution, the fat is hydrolysed to glycerin and free fatty acids (the glycerin is fully water-soluble, the fatty acids only partly water-soluble); however, oxidation to CO2 and H2O does not take place. 98.234.126.251 (talk) 10:52, 8 August 2009 (UTC)
- Animal fats are just solid oils. (Or rather, edible oils are simply liquid fats). You said it yourself - the braising liquid becomes oily. No quotation marks needed, the fat literally is melting, and is being added to the drippings. If you poured off the liquid and separated out the oil, not only would it solidify when it cooled, but it would probably be equivalent in volume/weight to the fat lost from the roast. One caveat to this would be that some of the fat may be emulsified into the water portion. I seriously doubt that a significant portion of the fat has been converted to fatty acids, as free fatty acids are, well, soap. (Your bath bar possibly lists sodium tallowate as an ingredient - that's saponified (hydrolyzed) beef fat.) A small amount of free fatty acids as well as mono- and diglycerides may form, which would help to emulsify the fats, but if a significant amount of free fatty acids were formed, your roasts would taste "soapy". -- 76.201.158.47 (talk) 14:36, 8 August 2009 (UTC)
- Soap gets part of its taste from the sodium in it, hydrolysed fats would be the free acid, and have a different taste. Mostly though the fat just melts, rather than reacting as mentioned above.83.100.250.79 (talk) 15:31, 8 August 2009 (UTC)
Light as a feather, stiff as a board
There is a fairly common "party trick" where somebody sits in a chair and a small group of people lift the chair and the person, using only one finger each (alternatively the lifters put their fingers under the subjects armpits and knees). I have found some discussions about how it works (it seems that it is called "light as a feather, stiff as a board" by some) but no definitive answers as to how it works. It seems to me that it is likely the case that the combined lifting force of the lifters is simply sufficient when the weight is shared between them (even though that seems counter-intuitive). Is it that, or is something else involved, or maybe is it really a "trick" with the lifted individual or one or more of the lifters in on the trick and somehow "cheating"? There is a Wikipedia article on the game, but it seems pretty vague, I am hoping that there is, in fact, a recognised scientific explanation for it. Bury me in a Y shaped coffin (talk) 10:57, 8 August 2009 (UTC)
We have an article Light as a feather, stiff as a board on that, it doesn't seem to suggest it is anything special - just that a number of people can easily lift a person and so the 'effort' is a trick of the mind (though it has a 'dubious' statement around it). ny156uk (talk)
- Thanks, yes that is the article that I mentioned. However, it does not say conclusively how it works. Because this is so common, and yet at first sight so counter-intuitive, I imagine that there must be a definitive answer somewhere. Bury me in a Y shaped coffin (talk) 15:59, 8 August 2009 (UTC)
- I think that's more a function of journaled researchers not spending a lot of time playing a 12-year old girls' sleepover game than anything else. The article offers a number of suggestions, however, all of which probably work in concert. Essentially, if you're trying to lift a 125 pound individual with 5 people, no one needs to lift more than 25 pounds. ~ Amory (user • talk • contribs) 16:17, 8 August 2009 (UTC)
- I think that you are forgetting that many of the reseachers did spend some time as 12 year old girls at some point in their lives, and the rest spent some time as 12 year old boys. My point being that this "trick" seems to have been very well known for centuries and, if it didn't have an obvious explanation, it would have been investigated by somebody. I am surprised that there is no definitive published answer on this, although I appreciate your input and that of the other people who have responded. Bury me in a Y shaped coffin (talk) 18:40, 8 August 2009 (UTC)
- I suspect many people, even when they were 12 years old, didn't play games like this. Even if they did, many probably didn't or don't now think there's anything extraordinary going on here. (The 'don't now' is perhaps a key point. Even if they really thought there was something extraordinary then, many would probably regard it now as such one of the silly things they believed while young.) Most scientists only really study things that are of interest to someone, probably them. There are some who do try to discredit pseudoscience or and few who perhaps are more open and willing to study pseudoscientific claims in their own right, but I don't think many people actually believe or claim there's anything unusual going on with the trick. (There are a lot of other areas where there are far more people who believe in some sort of pseudoscientific explaination which many would regard as more important to study or discredit.) In other words, the vast majority of people are unlikely to have any interest in studying the trick. In any case, it's not entirely clear what there is to study since as has been explained, there are many rather obvious things that could be going on here which most would consider entirely explain why some people think there's something unusual. Edit: It seems there's so brief discussion here [3] Nil Einne (talk) 10:00, 9 August 2009 (UTC)
- I don't think that there is anything pseudoscientific here. You have a phenomenom were people seem to be able to lift a large amount of weight, yet they feel that it is very light. This has been experienced by large number of people, it is not an unsubstantiated claim. Now, someone of a scientific mindset is likely to wonder what is going on here and want to be able to explain it to themselves. Now, there is either a very obvious explanation (obvious to somebody with the required knowledge) which you would think that somebody would state as the definitive explanation or somebody would be interested enough to investigate (not to the extent of multi-billion dollar research, but some kind of investigation). Surely this situation of spotting a phenomena, yet not being able to explain it, is the basis of a lot of good science (not pseudoscience). Remember also that I didn't suggest that this would be heavily researched, I just asked if there was a recognised scientific explanation. Bury me in a Y shaped coffin (talk) 14:21, 9 August 2009 (UTC)
- I suspect many people, even when they were 12 years old, didn't play games like this. Even if they did, many probably didn't or don't now think there's anything extraordinary going on here. (The 'don't now' is perhaps a key point. Even if they really thought there was something extraordinary then, many would probably regard it now as such one of the silly things they believed while young.) Most scientists only really study things that are of interest to someone, probably them. There are some who do try to discredit pseudoscience or and few who perhaps are more open and willing to study pseudoscientific claims in their own right, but I don't think many people actually believe or claim there's anything unusual going on with the trick. (There are a lot of other areas where there are far more people who believe in some sort of pseudoscientific explaination which many would regard as more important to study or discredit.) In other words, the vast majority of people are unlikely to have any interest in studying the trick. In any case, it's not entirely clear what there is to study since as has been explained, there are many rather obvious things that could be going on here which most would consider entirely explain why some people think there's something unusual. Edit: It seems there's so brief discussion here [3] Nil Einne (talk) 10:00, 9 August 2009 (UTC)
- I think the key thing is that a finger locked out straight is pretty much as strong as the arm it is attached to. Since the finger is locked the muscles controlling it don't have to do any work, they just have to maintain the tension. People think that the finger is doing the lifting when it really isn't, the arm is doing the lifting and of course an arm can lift a fifth of a person. --Tango (talk) 17:34, 8 August 2009 (UTC)
- I think that you are forgetting that many of the reseachers did spend some time as 12 year old girls at some point in their lives, and the rest spent some time as 12 year old boys. My point being that this "trick" seems to have been very well known for centuries and, if it didn't have an obvious explanation, it would have been investigated by somebody. I am surprised that there is no definitive published answer on this, although I appreciate your input and that of the other people who have responded. Bury me in a Y shaped coffin (talk) 18:40, 8 August 2009 (UTC)
- I think that's more a function of journaled researchers not spending a lot of time playing a 12-year old girls' sleepover game than anything else. The article offers a number of suggestions, however, all of which probably work in concert. Essentially, if you're trying to lift a 125 pound individual with 5 people, no one needs to lift more than 25 pounds. ~ Amory (user • talk • contribs) 16:17, 8 August 2009 (UTC)
Pushing things out of earth orbit
Would it be possible for an astronaut on the International Space Station to easily shove some garbage in the optimal direction so that it fell to earth and got burnt up? Or in reality is this not possible? If something was pushed towards earth, then as there is virtually no friction in space it should keep on going to earth, at least it would seem that way when viewed from the Space Station. 84.13.197.233 (talk) 14:55, 8 August 2009 (UTC)
- No. Unless the astronaut pushes really, really fast (as in much faster than any astronaut could conceivably push any significant amount of garbage), the garbage will keep orbiting, just in a slightly different orbit. —Preceding unsigned comment added by 81.11.170.162 (talk) 16:59, 8 August 2009 (UTC)
- No, it's quite impossible. Pushing something like this changes its speed (called giving it a delta-v, a change of velocity). Changing the speed of an orbiting body causes it to move into a different orbit (slow it down and it goes into a tighter orbit, speed it up and it goes into a wider orbit). To get from a low-Earth-orbit (LEO) to land on the earth takes a delta-v of more than 8km/s or more (per the diagram on the delta-v article), because that's how fast the astronaut and the ISS are orbiting. So the change to that 8km/s that the astronauts throw would induce would be so trivial that it would make a trivial difference to the orbit of the garbage. In fact the garbage will reenter in time (but so will the astronaut and the ISS, unless they do something about it), as they're all orbiting in the Thermosphere, one of the upper layers of the Earth's atmosphere. Although the drag from the very thin atmosphere is very little, it all adds up, and eventually it burns off enough velocity from things orbiting at the altitudes we're talking about for them to reenter. -- Finlay McWalter • Talk 17:34, 8 August 2009 (UTC)
- Yes, they can, because there is still a considerable amount of atmospheric drag at the altitude of the ISS. The ISS is boosted every few months, if the garbage isn't boosted it will eventually burn up. You don't actually want to push it towards Earth, you want to push it backwards along the line of the orbit. This will slow it down so it goes into a lower orbit where the drag will be more significant. I'm not quite sure what would happen if you threw it straight down - it certainly wouldn't go straight down since it would still have all its sideways momentum. I think you would actually increase the height of the orbit (well, it would become elliptical with the height at the point you threw it the same as it was before and higher on the other side of the planet). --Tango (talk) 17:30, 8 August 2009 (UTC)
- Come on Tango, the question was clearly wheather a person would have enough arm power to do it, not wheather it is theoretically possible and as Finlay pointed out the delta-v is pohibitivily high. BTW the orbit you described at the end of your post would happen if the person through the object forward, not earthward as you described.Dauto (talk) 18:23, 8 August 2009 (UTC)
- If you're already in a low enough orbit that you experience some atmospheric drag, then the garbage is already on a trajectory that will send it burning up eventually. Any way you throw it with any amount of force will work. It would be impossible for a person to throw it hard enough that it fell straight to Earth (completely stopping the object) but I don't think that's what the OP was asking.
- As for the orbit resulting from throwing it in the direction of Earth, if the final velocity toward Earth is small compared to the angular velocity, the new orbit would be elliptical but with roughly the same total energy. Since the push is perpendicular to the direction of motion it doesn't significantly affect the kinetic energy. You would see it falling away from you, but as it did it would accelerate in the direction of the orbit, and as it accelerated, the speed of it's fall would slow, until eventually it would start rising again. Rckrone (talk) 19:14, 8 August 2009 (UTC)
- Come on Tango, the question was clearly wheather a person would have enough arm power to do it, not wheather it is theoretically possible and as Finlay pointed out the delta-v is pohibitivily high. BTW the orbit you described at the end of your post would happen if the person through the object forward, not earthward as you described.Dauto (talk) 18:23, 8 August 2009 (UTC)
- The retro-rocket fire slows the speed by about 1% to cause reentry. Atmospheric drag does the rest of the delta v. Any delta-v in the retro direction would hasten reentry a bit, but shoving something, throwing it or pushing it would be far less than 1% or orbital velocity. For the ISS. 1% of velocity would be 77 m/sec. A baseball player might achieve a 100 mph or 45 m/s fastball. A cricket ball might reach the same speed [4]. It would clearly deorbit sooner than if not thrown. A tossed sack of garbage might be 1/10 of that speed or less. A kicked U.S. football might hit 27 m/sec [5]. A golf ball might hit 78 m/sec [6] and a jai alai ball could hit 84 m/s [7], and either should de-orbit nicely. Edison (talk) 19:19, 8 August 2009 (UTC)
- Something on the order of 1% is needed if you want to land in the next few minutes or hours, but for disposing of garbage it doesn't matter if it takes days or weeks to burn up (much longer than that would be annoying because you would need to keep tracking it to avoid collisions). --Tango (talk) 19:34, 8 August 2009 (UTC)
- The retro-rocket fire slows the speed by about 1% to cause reentry. Atmospheric drag does the rest of the delta v. Any delta-v in the retro direction would hasten reentry a bit, but shoving something, throwing it or pushing it would be far less than 1% or orbital velocity. For the ISS. 1% of velocity would be 77 m/sec. A baseball player might achieve a 100 mph or 45 m/s fastball. A cricket ball might reach the same speed [4]. It would clearly deorbit sooner than if not thrown. A tossed sack of garbage might be 1/10 of that speed or less. A kicked U.S. football might hit 27 m/sec [5]. A golf ball might hit 78 m/sec [6] and a jai alai ball could hit 84 m/s [7], and either should de-orbit nicely. Edison (talk) 19:19, 8 August 2009 (UTC)
- It's not just a matter of it being possible - it has actually been done. I can't remember which EVA it was, but I do recall reading about a broken part that was being replaced (or something like that) being disposed of by the astronaut throwing it away and letting it burn up over the next few weeks). --Tango (talk) 19:34, 8 August 2009 (UTC)
- The astronaut "throwing" has nothing to do with it; indeed, the astronaut didn't "throw", they just let go. Things in the ISS orbit lose speed, and thus altitude, all by themselves, due solely to atmospheric friction. Left alone the ISS itself would burn up for the same reason - it loses 100m of altitude per day, and requires an occasional kick of +ve delta-v from Progress or ATV - this burn gave it an additional 7km. -- Finlay McWalter • Talk 23:24, 8 August 2009 (UTC)
- They do throw things - otherwise there is a risk of them hitting the ISS. --Tango (talk) 23:37, 8 August 2009 (UTC)
- The astronaut "throwing" has nothing to do with it; indeed, the astronaut didn't "throw", they just let go. Things in the ISS orbit lose speed, and thus altitude, all by themselves, due solely to atmospheric friction. Left alone the ISS itself would burn up for the same reason - it loses 100m of altitude per day, and requires an occasional kick of +ve delta-v from Progress or ATV - this burn gave it an additional 7km. -- Finlay McWalter • Talk 23:24, 8 August 2009 (UTC)
If an astronaut pushed something towards earth, then wouldnt she/he see it continually coasting towards earth at a constant speed? As it got closer to earth, then it would be slowed down by atmospheric friction, and accelerate downwards due to gravity? That is how the astronaut would see it - from a static viewpoint it would seem to spiral down towards earth. 89.240.34.84 (talk) 22:50, 9 August 2009 (UTC)
- It wouldn't go straight down. The orbital period would not remain the same as the astronaut's. It would only spiral down because of drag, if it was a high enough orbit that drag was negligible it would go into a periodic orbit, just a more eccentric (elliptical) than before. --Tango (talk) 23:22, 9 August 2009 (UTC)
Tyres and Dry-Rot
Hello! I have a "project car" in my garage, and I've got a lead on a good deal for new tyres. But - The car won't be road ready for maybe a year or 2 at the rate I'm working on it! So if I buy these new tyres, and they go on the car now, will they dry-rot if they just sit there not rolling for extended periods? I usually roll the car forward and back 10-20 feet or so for various access while working, but nothing more than that. They are new-new as in 2008-2009 manufacture ,and not new-old, if that makes any difference. Cheers! —Preceding unsigned comment added by 71.62.88.123 (talk) 16:50, 8 August 2009 (UTC)
- Tires bought 2 years ahead of when you will start driving the car will obviously not give as many miles of use as if you bought them when you needed them. But the "good deal" might make up for that, I suppose. Edison (talk) 19:05, 8 August 2009 (UTC)
- Store your new tyres in a cool, dry, shaded place until you need them. Stack the tyres flat on their sides. Remember to check the tyre pressures when it's time to use them. Cuddlyable3 (talk) 22:50, 8 August 2009 (UTC)
- It is completely normal to keep using the same tires for a decade or more, e.g. if you have snow tires that you put on the car for just a few months a year and don't drive much during those months. Snow tires are usually left in the garage during the summer too. 67.117.147.249 (talk) 01:58, 9 August 2009 (UTC)
- I'd keep them in a cool, dry, dark place - resting on their sides, not inflated and not mounted onto wheels. I think they'll last you a good few years that way. (So what are you restoring? My current 'baby' is a 1963 Mk I Mini...tyres are no problem...but a replacement engine block is!) If the tyres you need are still being made - and if you don't actually need them yet - then I'd hold off buying them. There's bound to be another good deal coming along in a couple of years time - and since about 80% of restoration projects are never completed, you might be wasting your money. I rarely pre-buy anything - I get just the parts I'm going to use in the next month or two. SteveBaker (talk) 13:55, 10 August 2009 (UTC)
Detecting nuclear weapons
Lets say a terrorist has a suitcase nuclear bomb. Does that bomb emit any particles that can be detected at all? Perhaps neutrinos? This is all before the bomb detonates, not after. ScienceApe (talk) 19:51, 8 August 2009 (UTC)
- I'm almost certain the short answer is "yes", but I don't believe the radioactivity of bomb materials (plutonium and/or enriched uranium) is really that great (I don't believe proneness to an actual chain reaction is too closely correlated with radioactivity levels, though if someone wants to correct ME I'd be interested). Also, the casing will presumably be lead, which will block most of that radiation. As for the neutrinos, well, they're pretty hard to detect as they only interact weakly (the weak interaction).--Leon (talk) 19:57, 8 August 2009 (UTC)
- Mostly it would be gamma rays that could be detected externally. In principle, the gamma rays could be blocked or reduced below background radiation levels but it would probably take several centimeters of lead shielding on all sides - at the very least, and the "briefcase" would easily end up weighing as much as a small car. Yes, lead is really that dense! 69.140.12.180 (talk) 20:25, 8 August 2009 (UTC)Nightvid
- Here is an excellent article on this topic. --Sean 20:43, 8 August 2009 (UTC)
- Neither neutrinos nor gamma rays are produced by U235. Neutrinos are produced during beta-decay while gamma rays are produced during a gamma-decay (hence the name). U235 decays through a alpha-decay chain producing alpha-particles which can be easily stopped by a sheet of paper for instance. Dauto (talk) 20:47, 8 August 2009 (UTC)
- Isn't there some beta decay eventually down the chain? Would that produce a detectable amount of beta radiation? I guess it's kind of moot though since beta particles are easy to block too and neutrinos are too hard to detect. Rckrone (talk) 21:14, 8 August 2009 (UTC)
- The uranium and plutonium used in nuclear weapons are very pure and therefore practically free of radioactive decay products. Also, they have a very long half-life, so an appreciable amount of decay products simply cannot build up. So the answer to your question is a definite "no". 98.234.126.251 (talk) 21:26, 8 August 2009 (UTC)
- In the case of 235U, even if it's totally pure, the daughter nuclid 231Th decays emitting beta radiation and it has a half life of only 25.5 hours. The short half life means that you approach the equilibrium at which there is one 231Th decay for each 235U decay pretty quickly (after 25.5 hours there will be 1/2 231Th decay for each 235U decay, after 51 hours 3/4 etc.). But beta radiation isn't difficult to shield, only the neutrinos are, but they are also too difficult to measure. By the way, the uranium and plutonium in nuclear weapons are maybe very pure chemically, but certainly not very pure with respect to unwanted isotopes. Icek (talk) 17:45, 9 August 2009 (UTC)
- The uranium and plutonium used in nuclear weapons are very pure and therefore practically free of radioactive decay products. Also, they have a very long half-life, so an appreciable amount of decay products simply cannot build up. So the answer to your question is a definite "no". 98.234.126.251 (talk) 21:26, 8 August 2009 (UTC)
- Isn't there some beta decay eventually down the chain? Would that produce a detectable amount of beta radiation? I guess it's kind of moot though since beta particles are easy to block too and neutrinos are too hard to detect. Rckrone (talk) 21:14, 8 August 2009 (UTC)
- Neither neutrinos nor gamma rays are produced by U235. Neutrinos are produced during beta-decay while gamma rays are produced during a gamma-decay (hence the name). U235 decays through a alpha-decay chain producing alpha-particles which can be easily stopped by a sheet of paper for instance. Dauto (talk) 20:47, 8 August 2009 (UTC)
- That is an excellent, not to mention worrying article. I am surprised that the detectors they have in place seem to be so ineffective (although it seems that it is not really possible to construct effective ones), but I am amazed by the idea that a gunlike nuclear weapon could be so easy to build (even to the point that just dropping one piece of enriched uranium onto another could potentially create a 1 kiloton explosion). I had always assumed that you would need the technological infrastructure of a state to build such a weapon. I can see now why people can be so very concerned about smuggling of enriched uranium. Bury me in a Y shaped coffin (talk) 23:01, 8 August 2009 (UTC)
- The single hardest step of building an atomic bomb is the enrichment. Dauto (talk) 01:40, 9 August 2009 (UTC)
- Yes, it would seem so. This article from a few years back seems to suggest that designing a crude weapon would certainly not be beyond the ability of a group that could recruit a couple of PhD students. Of course, the last pieces of the puzzles are the fabrication and assembly of the bomb components. I wonder what level of expertise and equipment is required for that. Bury me in a Y shaped coffin (talk) 10:43, 9 August 2009 (UTC)
- I guess that one bit of good news is that the quality of enriched uranium being produced by states that are more likely to lose it (or deliberately provide it to groups) is likely much lower than that discussed in the Scientific American article (which they state could cause a 1 kt explosion just by dropping one piece onto another), meaning that a bomb that used it would need to be more sophisticated (in terms of the accuracy of the components) and therefore less easy to construct. Bury me in a Y shaped coffin (talk) 10:48, 9 August 2009 (UTC)
- The hard parts of making a "suitcase" nuclear bomb are not the conceptual parts (which any Ph.D. student would have no trouble grasping). Probably, most college sophomore engineering students can handle all the conceptual details of the designs. But the execution of the extreme precision engineering required for all parts of the device are very hard to do. Refining the radioactive elements is the most commonly cited "difficult engineering task" - conceptually simple, but actually manufacturing and refining pure U235 or plutonium is so nontrivial that it really does take a sizeable operation. But this is only one single part of the process! While reading today about the Nagasaki bombing, I read about the fuzing device - an Exploding-bridgewire detonator (designed by a Ph.D. student at Berkeley, no less). But the precision engineering required on the Nagasaki bomb required a timing control on the chemical reaction of the detonators on the order of microseconds - else the shockwave does not properly yield the explosive lens effect necessary for achieving the the critical density for fission. Surely there are thousands of other extremely precise mechanical, chemical, nuclear, and electronics details. Even with a small team of highly trained experts, there's not a very good way to get these engineering details worked out - a large infrastructure base is required for the kinds of details necessary. In brief, there is a huge difference between understanding the process to make pure U235, and being able to make it. The same applies for every other engineering detail of these weapons - they're really fragile, balanced on a knife-edge betwen functional- and dud- so any little slip-up would result in a heavy lead-lined suitcase with some sort of hazardous stuff in it (but no nuclear weapon). Nimur (talk) 19:28, 9 August 2009 (UTC)
- See Radioactive Boy Scout. Apparently it isn't too hard for a 17-year-old. -RunningOnBrains(talk) 06:31, 10 August 2009 (UTC)
- You're confusing a tiny "reactor" of sorts with an actual bomb. Not the same, at all. If he had run his reactor for the rest of his life, he wouldn't have had an atomic bomb. More relevant article: Nth Country Experiment. --98.217.14.211 (talk) 00:30, 11 August 2009 (UTC)
- See Radioactive Boy Scout. Apparently it isn't too hard for a 17-year-old. -RunningOnBrains(talk) 06:31, 10 August 2009 (UTC)
- Make sense, although the bomb dropped on Nagasaki was of an implosion design rather than a gun-type weapon. I understand that implosion weapon are many times more difficult to create because of the timing issues that you mention. Not sure if you have had a chance to read the article linked by Sean above, but it suggests that gun-type designs are much easier to fabricate and, if the uranium is sufficiently enriched, you could potentially even get a detonation by just dropping one piece on the other. In a gun type weapon you are basically just slamming two pieces of uranium together, but of course the engineering required is still going to be slightly complex, I just wonder how complex. Bury me in a Y shaped coffin (talk) 20:00, 9 August 2009 (UTC)
- You'd need a gun that can shoot uranium at high speeds; that's easy enough to make. You'd also need neutron reflectors to cause as many fission events as possible before the bomb disintegrates, but I don't see anything challenging about surrounding the gun with reflector material. Whether all of this can fit in a suitcase, I have no idea. --Bowlhover (talk) 22:52, 9 August 2009 (UTC)
- Probably, if you have the right materials and know what you are doing. They used gun-type weapons in developing nuclear artillery shells which are about the size of a large suitcase. --98.217.14.211 (talk) 00:30, 11 August 2009 (UTC)
- You'd need a gun that can shoot uranium at high speeds; that's easy enough to make. You'd also need neutron reflectors to cause as many fission events as possible before the bomb disintegrates, but I don't see anything challenging about surrounding the gun with reflector material. Whether all of this can fit in a suitcase, I have no idea. --Bowlhover (talk) 22:52, 9 August 2009 (UTC)
- The hard parts of making a "suitcase" nuclear bomb are not the conceptual parts (which any Ph.D. student would have no trouble grasping). Probably, most college sophomore engineering students can handle all the conceptual details of the designs. But the execution of the extreme precision engineering required for all parts of the device are very hard to do. Refining the radioactive elements is the most commonly cited "difficult engineering task" - conceptually simple, but actually manufacturing and refining pure U235 or plutonium is so nontrivial that it really does take a sizeable operation. But this is only one single part of the process! While reading today about the Nagasaki bombing, I read about the fuzing device - an Exploding-bridgewire detonator (designed by a Ph.D. student at Berkeley, no less). But the precision engineering required on the Nagasaki bomb required a timing control on the chemical reaction of the detonators on the order of microseconds - else the shockwave does not properly yield the explosive lens effect necessary for achieving the the critical density for fission. Surely there are thousands of other extremely precise mechanical, chemical, nuclear, and electronics details. Even with a small team of highly trained experts, there's not a very good way to get these engineering details worked out - a large infrastructure base is required for the kinds of details necessary. In brief, there is a huge difference between understanding the process to make pure U235, and being able to make it. The same applies for every other engineering detail of these weapons - they're really fragile, balanced on a knife-edge betwen functional- and dud- so any little slip-up would result in a heavy lead-lined suitcase with some sort of hazardous stuff in it (but no nuclear weapon). Nimur (talk) 19:28, 9 August 2009 (UTC)
- The single hardest step of building an atomic bomb is the enrichment. Dauto (talk) 01:40, 9 August 2009 (UTC)
- The theory is only that you have to take two or more sub-critical-mass chunks and push them together to make a critical mass chunk and kaboom! The practical problem (which is why the guys at the Manhattan project had such a hard time making something that actually worked) is that when the two sub-critical mass pieces get close - the amount of heat and radiation goes up very rapidly, and this can be enough to rip the bomb to shreds without it actually going critical and producing the expected yield. The call this a "fizzle". So simply dropping one chunk of material onto another doesn't produce the large yield you need to take out a city...although it might be enough to spread radioactive material over a few city blocks...a "dirty bomb". You could do as well by just wrapping some radioactive material around a few sticks of dynamite. The whole business of experimenting with "gun" and "implosion" designs was to solve the question of how to get the fissile material close enough together and to hold it there for long enough for the chain reaction to really get going. Slamming the parts together RAPIDLY seems to have been the key - and for that you need either a "gun" or an "implosion" device...but small, subtle details of the design - and high engineering tolerances - seem to be a vital part of making something that actually works without fizzling. Given the ruinously expensive cost of the fissile material, this kind of thing can't really be done experimentally by anyone short of a major governement - so you are left with needing to steal someone else's design and doing some really first class precision machining - or employing a LOT of very smart people to figure out a new design with a real chance of working the very first time you try it. SteveBaker (talk) 13:48, 10 August 2009 (UTC)
- I just want to note that it's easy to deride a fizzle as not being very powerful, but if you set off a .5kt explosion in a major city, it would without a doubt be the most deadly terrorist attack ever perpetrated. When you start talking about nuclear yields, it's easy to fall into the "if it's smaller than Hiroshima, it's a dud" mindset, but if you take the time to calculate how bad that would actually be, it's pretty bad if you get an appreciable yield at all (which for U-235, you probably would, if you dropped 1.5 crits together in a crude way). The Oklahoma City bomb was only .002 kt. If you can get anything appreciable nuclear yield, then you're still talking about a relatively large explosion.
- I also want to object that only governments could come up with a gun-type design that would work. I suspect a small team of people with the right backgrounds (some physics, some explosives, some engineering) could easily come up with a Hiroshima-style weapon IF they had the U-235. It's a shop-class sort of project, and you don't need to waste U-235 to experiment about it (they didn't during the Manhattan Project, and things are a lot better known today than they were then... you can get a million times more information about fission processes through a nuclear engineering course than they ever had during the war). Implosion designs are much, much harder, and require the whole team of very smart people to work on (even if it is not as revolutionary as it once was). For U-235, the only significant hurtle is obtaining the material—which is why it is a much, much more dangerous element from the point of view of terrorism than plutonium. --98.217.14.211 (talk) 00:30, 11 August 2009 (UTC)
- On detecting nuclear weapons: Robert Oppenheimer was asked by a Senator once, in Congress, what instrument he would use to detect an atomic bomb. "A screwdriver," he replied—to open every suitcase coming in. --98.217.14.211 (talk) 00:30, 11 August 2009 (UTC)
- [citation needed]. Nimur (talk) 21:05, 11 August 2009 (UTC)
- Bird and Sherwin, American Prometheus, p. 349. A great book, incidentally. --98.217.14.211 (talk) 18:55, 12 August 2009 (UTC)
- [citation needed]. Nimur (talk) 21:05, 11 August 2009 (UTC)
- Nobody mentioned muon radiography. While this LANL press release says that "efforts to shield nuclear materials with lead or similar heavy metals make a smuggled object easier to detect with muons" you would of course only see that there are these high-Z materials like lead. Icek (talk) 08:43, 12 August 2009 (UTC)
Antenna length
(apologies if I'm not on the right desk) I have one of those portable TVs with a whip antenna attached. (You can extend the antenna to a length of about 30 inches, and retract it to about 5 inches.) What is the best length of this antenna - half or quarter wavelength? Xenon54 (talk) 21:41, 8 August 2009 (UTC)
- What frequency or station are you trying to tune to?83.100.250.79 (talk) 22:21, 8 August 2009 (UTC)
- Specifically, it's WJZ-TV on channel 13 (211 MHz). Quarter-wavelength is 13.3 inches (I think), but something's telling me "No! It's half!" and I can't remember which it is. Xenon54 (talk) 22:54, 8 August 2009 (UTC)
- Dipole antenna is 1/2 , Whip antenna is 1/4 which must 'be grounded'. (I get about 13.9" for 1/4) I assume the article is right? 83.100.250.79 (talk) 23:47, 8 August 2009 (UTC)
- Specifically, it's WJZ-TV on channel 13 (211 MHz). Quarter-wavelength is 13.3 inches (I think), but something's telling me "No! It's half!" and I can't remember which it is. Xenon54 (talk) 22:54, 8 August 2009 (UTC)
- At 211MHz, the wavelength = 1.42 meters = 56 inches. 1/4 wavelength is 14 inches.
Generally speaking, a longer antenna always 'intercepts' more energy. I'll go with the half-wavelength (28") being 'better' for reception ... 'in free space' at least.
Twang (talk) 08:44, 9 August 2009 (UTC)- Responders have assumed that "best" means maximum sensitivity. That could be true when seeking a distant station. It's more usual to have adequate signal strength but receive a picture that is degraded by "ghosting" due to delayed signal(s) from reflection(s). A whip aerial has little or no directivity but you can experiment with its length and position to minimise ghosts. Cuddlyable3 (talk) 12:42, 9 August 2009 (UTC)
- A bit of OR here, I've had good results with ghost removal in a weakish reception area, by resting the tip of the antenna against an aluminium venetian blind.-KoolerStill (talk) 18:25, 9 August 2009 (UTC)
- Dipole antennas for televisions are very weakly tuned anyway, (and they must pick up a reasonably wide-band channel, with various different wavelengths). The "quarter-wavelength" or "half-wavelength" concept is usually less relevant in this situation than other factors - most importantly, the dipole is directional, so changing its orientation will affect your signal reception capability. Also, the total received power will vary (roughly linearly) with the length of the antenna - so a longer antenna, which de-tunes from the correct frequency, may still yield better total signal reception due to better received power. Your specific dipole antenna circumstances may vary... Nimur (talk) 19:17, 9 August 2009 (UTC)
August 9
Is this guy a crank?
http://www.wholeapproach.com/index.php
I tried to google criticism of this website but no results. Any help?--12.48.220.130 (talk) 03:11, 9 August 2009 (UTC)
- The evidence for these yeast syndromes is dubious at best, the condition is not widely accepted among the mainstream medical and scientific community. See [8] and [9] Rockpocket 03:55, 9 August 2009 (UTC)
- While not specifically answering the question, Googling for criticism of a website is often ineffective because unless the person/website is a notable crank, it's likely no one has discussed it. Googling for the claims made or therapy or whatever is likely to be more effective presuming the person didn't come up with some 'novel' idea. Even better of course is to look into the science and website. Does the website mention any science to support it? Is there any science to support it? If for example, the website is describing some sort of treatment, then looking into the condition the treatement is alleged to help should be illuminating. Ultimately the best thing is perhaps not to ask is the person a crank but is there any evidence the person is not a crank? Nil Einne (talk) 17:01, 10 August 2009 (UTC)
Where can I find more about that? —Preceding unsigned comment added by 12.48.220.130 (talk) 04:35, 9 August 2009 (UTC)
- See the references for Candidiasis#Alternative views. Red Act (talk) 10:12, 9 August 2009 (UTC)
Zero Velocity but accelerating!!!!!
Can an object moving with zero velocity have some acceleration?? -- 04:17, 9 August 2009 (UTC)
- Momentarily, yes. I suspect this is homework, so I won't give the detailed answer. However, watch the pendulum and you may be enlightened :) --Dr Dima (talk) 04:25, 9 August 2009 (UTC)
- This is not homework. I just happened to ponder about it! I always get such stupid questions in my mind!!! -- 04:34, 9 August 2009 (UTC)
Plot the trajectory of a ball thrown up into the air as a function of distance versus time. Take the derivative, to find velocity. Is the function defined at y=0? If so, then the object experienced zero velocity even undergoing constant gravitational acceleration. John Riemann Soong (talk) 06:00, 9 August 2009 (UTC)
Can an object be not moving and yet is accelerating at the same time? The answer is yes. But the "amount of time" the object spent at this strange state is infinitesimally small. 122.107.207.98 (talk) 11:39, 9 August 2009 (UTC)
- Until you put it into a simple harmonic motion system that is. Well okay, it's still going to be infinitesimally small (thanks to the cardinality of the continuum), but it'll repeat that moment every time the cycle repeats. John Riemann Soong (talk) 14:11, 9 August 2009 (UTC)
- The original questioner might want to contemplate the conceptual difference between velocity and instantaneous velocity. A particle can have an instantaneous velocity of 0, and a non-zero acceleration; but after an infinitely small instant of time, it will soon have a non-zero velocity as well. This thought-experiment is often used to introduce the concept of the derivative with respect to time, in an elementary mechanics or calculus class. Nimur (talk) 19:14, 9 August 2009 (UTC)
- Bringing in the ideas that went into special relativity, a person sitting in a box that travel upwards at a constant acceleration, cannot distinguish this from sitting in a box at rest, in a gravitational field. (on the ground) This really goes back to Newton since the force the ground is pushing at you with is given as F = m*a where a is the gravitational acceleration. EverGreg (talk) 12:09, 10 August 2009 (UTC)
- A train set out at midday, travelling (as they do) from A to B at 100mph. A common housefly sets out at the same time, travelling from B to A at 1mph. At point C, the fly hits the front of the train. In this instant, it is momentarily stationary. Since the fly and the train are both at point C - then either the fly's velocity changed from 1mph to -100mph in zero time (which would require an infinite acceleration and hence an infinite force) - or the fly slowed down, was briefly stationary, then gained a finite acceleration up to -100mph. In which case, was the train also stationary at some point? Did the fly stop the train? The problem with these thought-experiments is that they neglect the elasticity of objects at macro-scales and the sheer weirdness of things at the nano-scale. In theory, the fly reached zero velocity had an acceleration that was non-zero - but it can only have that for an amount of time equal to zero. In practice, time, position, momentum and force are all quantized in weird and wonderful ways - so that this issue simply doesn't come up as a practical problem. When the fly hit the train, both fly and train deformed, atom by atom - some atoms in the train did reverse direction briefly. The forces between the atoms acted to repel them from each other and cause a gradual slow-down, then acceleration of the two surfaces at the nano-scale. You really can't ask these questions at the 'macro' scale and get a sensible answer. SteveBaker (talk) 13:34, 10 August 2009 (UTC)
Certainly. Take a ball, hold it in your hand and then leave it - letting it free-fall. The moment you leave it, it has zero velocity ( wrt to you) but has an acceleration of g=9.8m/s/s/.
Velocity is always measured relative to a frame. Suppose you are running at a constant speed of 2m/s , another firend of your starts from rest, accelerating at .5m/s . At exactly 4 sec - he is at rest, having velocity of zero magnitude in your frame of reference. Hope this clears up things for you.
Dilip rajeev (talk) 07:31, 16 August 2009 (UTC)
Untitled Query
how to split hydrogen and nitrogen from urea. please say the method in detail. —Preceding unsigned comment added by Studiousvenkat (talk • contribs) 05:06, 9 August 2009 (UTC)
- Welcome to the Wikipedia Reference Desk. Your question appears to be a homework question. I apologize if this is a misevaluation, but it is our policy here to not do people's homework for them, but to merely aid them in doing it themselves. Letting someone else do your homework does not help you learn how to solve such problems. Please attempt to solve the problem yourself first. If you need help with a specific part of your homework, feel free to tell us where you are stuck and ask for help. If you need help grasping the concept of a problem, by all means let us know. Thank you. ~ Amory (user • talk • contribs) 06:12, 9 August 2009 (UTC)
- Subscription required. If you can't access that article, then google "10.1039/b905974a" (that will bring up references to the paper). 152.16.59.102 (talk) 06:14, 9 August 2009 (UTC)
- Uhh, how do you want your hydrogen and nitrogen? As ammonia? As N2 and H2? John Riemann Soong (talk) 06:18, 9 August 2009 (UTC)
- Use a mass spectrometer - that will provide N , C, O and H atoms!83.100.250.79 (talk) 12:39, 9 August 2009 (UTC)
- A related chemical process is the Haber process - an efficient method for producing ammonia, given nitrogen and hydrogen. The process is reversible, so under some conditions, you can produce nitrogen and hydrogen from ammonia. So, one method to solve the initial question is to decay the urea into ammonia (via hydrolysis) - and then use the ammonia into a reversed Haber process. You might also want to read about the urea cycle. Nimur (talk) 19:11, 9 August 2009 (UTC)
Suppose you're standing on the surface of a balloon
Further suppose that this balloon is in empty space, far away from any other matter, but you have your own air supply. Further suppose that this (very large) balloon is very elastic. Air is being pumped into it rapidly, and it is expanding. It has negligible mass (compared to, say, a planet), but because the surface is expanding, you are being accelerated.
Consequently (because your body has inertia), you are able to walk around on the surface. Because it's expanding at just the right rate, you feel a 'weight' just like you do when you walk around on the surface of the Earth.
Here's the question: how is this 'force' -- caused by expansion of the balloon -- fundamentally different (apart from its cause) from the force of gravity? Twang (talk) 08:25, 9 August 2009 (UTC)
- Other than observing the relative motion of nearby objects (if any), I can think of no way to tell the difference, though the expansion would have to be in space rather than of space. Dbfirs 08:32, 9 August 2009 (UTC)
- You wouldn’t be able to tell the difference, with local experiments. See Einstein equivalence principle. Red Act (talk) 10:26, 9 August 2009 (UTC)
- A local experiment: Stop walking, stand and look at your feet gradually moving apart. Cuddlyable3 (talk) 12:31, 9 August 2009 (UTC)
- "Local" is a technical term, it means (roughly speaking) that the experiment only concerns a single point (or an arbitrarily small region around that point). Your experiment isn't local since your feet are in two different places. --Tango (talk) 15:21, 9 August 2009 (UTC)
- A local experiment: Stop walking, stand and look at your feet gradually moving apart. Cuddlyable3 (talk) 12:31, 9 August 2009 (UTC)
Wouldn't your acceleration be different depending on what sort of mass you had? What if you were as twice as heavy? John Riemann Soong (talk) 15:38, 9 August 2009 (UTC)
- Yes, but if the pressure in the balloon was high enough you compressing the balloon would be a negligible factor. --Tango (talk) 15:52, 9 August 2009 (UTC)
I suppose it depends on how you define fundamentally, but the acceleration you'd feel on the balloon is essentially pressure, caused by the air being pumped in (work is being done). Gravity is gravity. ~ Amory (user • talk • contribs) 15:58, 9 August 2009 (UTC)
- In science, things are only considered to be different if there is an experiment that tells them apart. According to General Relativity, there is no experiment that can tell acceleration (whatever the cause) and gravity apart, so they are the same thing. --Tango (talk) 16:03, 9 August 2009 (UTC)
- This was meant as a response to Bus stop's removed comment, but it's applicable here. I was trying to imply that the fact that the two "forces" are from different causes matters here. I failed miserably. At any rate, the "weight" on the balloon is caused due to its expansion due to the pumping-in of air, as I said. What that means, however, is that more and more air must be pumped in in order to sustain that weight, as implied in the question. As the balloon expands further and further, you move farther and farther away from a given point, something you do not notice under the influence of gravity unless no other forces are in play. If you did the same thing with gravity (move away from the center of gravity), you would begin to weigh less and less as the distance between you increased. The question was about forces and weight, not accelerations, and our weight on Earth rarely involves a significant amount of acceleration. ~ Amory (user • talk • contribs) 16:36, 9 August 2009 (UTC)
- I'm believe Amory has a point, but I disagree with the significance of the issue, or more properly, I feel that the response needs more qualification. With a very large balloon, on which the surface is approximately flat in a decent-sized neighbourhood of the observer, he needn't notice the change in its shape (which I'll add Amory very rightly did not mention), and let's suppose he build a house and other landmarks on this near-flat surface. How would he know he was moving? With reference to applicable landmarks, he wouldn't be. So he needn't notice.--Leon (talk) 16:46, 9 August 2009 (UTC)
- Actually I think he would notice. While the shape doesn't noticeably change the size does. The radius of the balloon needs to increase with an acceleration of 9.8m/s2. The distance between two points is the angle between them (in radians) multiplied by the radius, so that will be increasing at a speed equal to the speed the radius is enlarging multiplied by that angle. Assuming the balloon started at rest the size of the Earth and the most distant parts of the house were 20m apart, that corresponds to an angle of 20/6400000=1/320000 radians. The size of the house is then R/320000, where R=6400000+1/2*9.8*t2. If we assume the house can survive an expansion of 1% before it collapses then it will collapse when (6400000+1/2*9.8*t2)/320000=20.2, ie. when 1/2*9.8*t2/320000=0.2, which is 3 hours and 38 minutes after the start. So this guy's house would collapse in less than 4 hours - he would notice that! It is only locally that acceleration and gravity are equivalent, a house is an extended object so it can tell the difference (at least, it can tell that the acceleration/gravity isn't uniform, you probably could describe the house collapsing in terms of tidal forces in some gravitational field). --Tango (talk) 17:22, 9 August 2009 (UTC)
- That's true; though the larger the balloon's radius the longer the house would stand! However, more germanely, the environment would change globally, which makes creating some sort of "static" local environment difficult. I suppose that if the surface has zero friction, one could place some extremely large platform upon it to build such an environment. In which case I don't think he'd notice.--Leon (talk) 17:31, 9 August 2009 (UTC)
- The larger the balloon's starting radius, the longer the house would stand. If I'd assumed the balloon had started at zero size and then the house was built once it reached the Earth's size, it wouldn't have lasted anywhere near as long (probably seconds, I haven't done the sums). I think if you had an enclosed platform that met the balloon tangentially (ie. at a single point - not possible in real life, but good enough for a thought experiment like this one), you wouldn't be able to tell the difference between that and a similar platform on Earth. --Tango (talk) 17:36, 9 August 2009 (UTC)
- It’s possible to perform experiments that would distinguish between the two situations, even within an enclosed platform, if the distances and times involved in the experiment are too large for the experiment to qualify as being local, as is the case with the house example. Suppose that 20m wide house isn’t attached to the balloon, but instead is engineered to allow the balloon to expand under it. Suppose the house has a precisely flat, perfectly frictionless, 20m-long table in it, that’s been balanced with the use of a super-precise level placed at the center of the table. Take two perfectly frictionless objects, and place them so they’re precisely motionless at the ends of the table. Wait the 3 hours and 38 minutes. If the objects have moved together by about 1%, you’re on earth. If the objects are where you left them, your house is being pushed along by the expanding balloon. Or if you’re impatient, you can just weigh yourself with super-precise scales on the house’s ground floor, and in the house’s attic. If you weigh less in the attic, you’re on Earth. If you weigh the same in both places, you’re on the balloon. Red Act (talk) 20:00, 9 August 2009 (UTC)
- You make a good point, I was so wrapped up in the details of the balloon I forgot the Earth's gravitational field wasn't uniform! --Tango (talk) 20:26, 9 August 2009 (UTC)
- It’s possible to perform experiments that would distinguish between the two situations, even within an enclosed platform, if the distances and times involved in the experiment are too large for the experiment to qualify as being local, as is the case with the house example. Suppose that 20m wide house isn’t attached to the balloon, but instead is engineered to allow the balloon to expand under it. Suppose the house has a precisely flat, perfectly frictionless, 20m-long table in it, that’s been balanced with the use of a super-precise level placed at the center of the table. Take two perfectly frictionless objects, and place them so they’re precisely motionless at the ends of the table. Wait the 3 hours and 38 minutes. If the objects have moved together by about 1%, you’re on earth. If the objects are where you left them, your house is being pushed along by the expanding balloon. Or if you’re impatient, you can just weigh yourself with super-precise scales on the house’s ground floor, and in the house’s attic. If you weigh less in the attic, you’re on Earth. If you weigh the same in both places, you’re on the balloon. Red Act (talk) 20:00, 9 August 2009 (UTC)
- The larger the balloon's starting radius, the longer the house would stand. If I'd assumed the balloon had started at zero size and then the house was built once it reached the Earth's size, it wouldn't have lasted anywhere near as long (probably seconds, I haven't done the sums). I think if you had an enclosed platform that met the balloon tangentially (ie. at a single point - not possible in real life, but good enough for a thought experiment like this one), you wouldn't be able to tell the difference between that and a similar platform on Earth. --Tango (talk) 17:36, 9 August 2009 (UTC)
- That's true; though the larger the balloon's radius the longer the house would stand! However, more germanely, the environment would change globally, which makes creating some sort of "static" local environment difficult. I suppose that if the surface has zero friction, one could place some extremely large platform upon it to build such an environment. In which case I don't think he'd notice.--Leon (talk) 17:31, 9 August 2009 (UTC)
- Actually I think he would notice. While the shape doesn't noticeably change the size does. The radius of the balloon needs to increase with an acceleration of 9.8m/s2. The distance between two points is the angle between them (in radians) multiplied by the radius, so that will be increasing at a speed equal to the speed the radius is enlarging multiplied by that angle. Assuming the balloon started at rest the size of the Earth and the most distant parts of the house were 20m apart, that corresponds to an angle of 20/6400000=1/320000 radians. The size of the house is then R/320000, where R=6400000+1/2*9.8*t2. If we assume the house can survive an expansion of 1% before it collapses then it will collapse when (6400000+1/2*9.8*t2)/320000=20.2, ie. when 1/2*9.8*t2/320000=0.2, which is 3 hours and 38 minutes after the start. So this guy's house would collapse in less than 4 hours - he would notice that! It is only locally that acceleration and gravity are equivalent, a house is an extended object so it can tell the difference (at least, it can tell that the acceleration/gravity isn't uniform, you probably could describe the house collapsing in terms of tidal forces in some gravitational field). --Tango (talk) 17:22, 9 August 2009 (UTC)
- I'm believe Amory has a point, but I disagree with the significance of the issue, or more properly, I feel that the response needs more qualification. With a very large balloon, on which the surface is approximately flat in a decent-sized neighbourhood of the observer, he needn't notice the change in its shape (which I'll add Amory very rightly did not mention), and let's suppose he build a house and other landmarks on this near-flat surface. How would he know he was moving? With reference to applicable landmarks, he wouldn't be. So he needn't notice.--Leon (talk) 16:46, 9 August 2009 (UTC)
- It's really worth noting that large spheres of gas have extremely appreciable gravity. In fact, most of the gravitating objects in our universe are large spheres of gas. How can the force of gravity be considered "negligible" if there is enough gas to make a balloon like the one that's being described? Nimur (talk) 22:01, 9 August 2009 (UTC)
- Those large spheres of gas aren't made of gas as we know it. Most of Jupiter is metallic hydrogen. Stars are made of plasma and behave very differently to gasses like those in Earth's atmosphere. An Earth-sized balloon filled with Earth-like air would have a pretty low mass, even lower if you filled it with hydrogen instead. I'm not sure exactly what because I'm not sure how much it would compress under its own gravity. The density will also depend on the nature of the balloon itself. --Tango (talk) 22:14, 9 August 2009 (UTC)
- Given the radius of Earth as 6371km, and a density of Hydrogen of 0.08988 g/L (massive underestimate), an Earth-sized ball of hydrogen would be approximately 1020kg (if my quick math is right), a full 10,000 times less than the current Earth, but hardly negligible (compare to the mass of the Moon). ~ Amory (user • talk • contribs) 22:34, 9 August 2009 (UTC)
- Where did that density come from? If that's under STP, it's pretty meaningless - why would this balloon be under STP? Don't forget you are further away from the centre of gravity than you would be on the moon, so surface gravity would be lower than you might expect. 10,000 times less density means 10,000 less surface gravity, so that's 0.00098m/s2, only 100 times more than microgravity on the ISS [10] and that is often described as zero-g. It's pretty negligible, if you ask me. --Tango (talk) 22:52, 9 August 2009 (UTC)
- If you're interested Tango (or others) I responded on my talk page here, not wanting to derail this (now lovingly answered) question further. ~ Amory (user • talk • contribs) 23:44, 9 August 2009 (UTC)
- Where did that density come from? If that's under STP, it's pretty meaningless - why would this balloon be under STP? Don't forget you are further away from the centre of gravity than you would be on the moon, so surface gravity would be lower than you might expect. 10,000 times less density means 10,000 less surface gravity, so that's 0.00098m/s2, only 100 times more than microgravity on the ISS [10] and that is often described as zero-g. It's pretty negligible, if you ask me. --Tango (talk) 22:52, 9 August 2009 (UTC)
- Given the radius of Earth as 6371km, and a density of Hydrogen of 0.08988 g/L (massive underestimate), an Earth-sized ball of hydrogen would be approximately 1020kg (if my quick math is right), a full 10,000 times less than the current Earth, but hardly negligible (compare to the mass of the Moon). ~ Amory (user • talk • contribs) 22:34, 9 August 2009 (UTC)
- It's a thought exercise - the question is about the specific acceleration and forces on the balloon, trying to ignore all other influences. Clearly it's not realistic, but it's useful for our understanding to deconstruct a problem. ~ Amory (user • talk • contribs) 22:19, 9 August 2009 (UTC)
- Those large spheres of gas aren't made of gas as we know it. Most of Jupiter is metallic hydrogen. Stars are made of plasma and behave very differently to gasses like those in Earth's atmosphere. An Earth-sized balloon filled with Earth-like air would have a pretty low mass, even lower if you filled it with hydrogen instead. I'm not sure exactly what because I'm not sure how much it would compress under its own gravity. The density will also depend on the nature of the balloon itself. --Tango (talk) 22:14, 9 August 2009 (UTC)
- It's really worth noting that large spheres of gas have extremely appreciable gravity. In fact, most of the gravitating objects in our universe are large spheres of gas. How can the force of gravity be considered "negligible" if there is enough gas to make a balloon like the one that's being described? Nimur (talk) 22:01, 9 August 2009 (UTC)
- In response to an earlier objection that the expanding balloon would tear the house apart, there are casters and sliding pads which would allow the house to be supported at four or more points which would slip along the surface as the balloon expanded. The base of the house could also be a Teflon covered flat or curved plate or diaphragm which would slip nicely. Edison (talk) 02:48, 10 August 2009 (UTC)
- We weren't trying to build a house, though, we were trying to hide the fact that the balloon was expanding. You could tell the balloon was expanding by watching the wheels turn around or whatever. --Tango (talk) 11:36, 10 August 2009 (UTC)
- Couldn't you tell the difference with the Cavendish experiment? AlmostReadytoFly (talk) 11:48, 10 August 2009 (UTC)
- So if you jump off of the surface of the balloon, there is nothing to reduce your outward velocity (no gravity) - but it seems like there is because the balloon is accelerating upwards towards you at exactly the rate that gravity would be lowing you down. However, there is an experiment you can do - which is to toss a ball vertically upwards at "escape velocity" for the planet you think you're standing on. If there is real gravity - then the ball will never return to you - if there is only this 'fake' gravity, then the ball will always come back eventually, no matter how fast you throw it. As others have pointed out, it's only the same as gravity "locally" - and as soon as you can do any kind of non-local experiment, you can tell the difference. You specified an otherwise empty universe - and that's just as well because otherwise we'd be able to measure the red-shift of nearby stars and discover that they too are accelerating towards us in a manner that could not happen if this were a gravitational field because they are too far away. The illusion of gravity is perfect for strictly 'local' observations...but is easily detectable with almost any kind of non-local experiment. The Cavendish experiment uses non-locality. SteveBaker (talk) 13:18, 10 August 2009 (UTC)
- Actually, I don’t see how doing the Cavendish experiment would enable you to tell the difference. The Cavendish experiment doesn’t rely on non-locality at all. What the Cavendish experiment measured was the gravitational attraction between lead balls separated by a few centimeters, by measuring miniscule changes in the motion of a rod that only oscillated back and forth by about 4 mm. The distances involved are too small for variations in the Earth’s gravitational field to affect the measurements, and the masses of the balls are vastly too small for gravity’s nonlinearity to have a significant effect. So within experimental error, the Cavendish experiment would measure the gravitational attraction between the balls to be the same, whether you were on Earth or on the balloon. Red Act (talk) 15:19, 10 August 2009 (UTC)
- Indeed. The Cavendish experiment is done horizontally so local gravity or vertical acceleration won't make any difference - that's really the whole point, you want to remove any contributions from anything other than the gravity of the balls. --Tango (talk) 15:30, 10 August 2009 (UTC)
- Actually, I don’t see how doing the Cavendish experiment would enable you to tell the difference. The Cavendish experiment doesn’t rely on non-locality at all. What the Cavendish experiment measured was the gravitational attraction between lead balls separated by a few centimeters, by measuring miniscule changes in the motion of a rod that only oscillated back and forth by about 4 mm. The distances involved are too small for variations in the Earth’s gravitational field to affect the measurements, and the masses of the balls are vastly too small for gravity’s nonlinearity to have a significant effect. So within experimental error, the Cavendish experiment would measure the gravitational attraction between the balls to be the same, whether you were on Earth or on the balloon. Red Act (talk) 15:19, 10 August 2009 (UTC)
Thanks, y'all. I hope you had as much fun with it as I did reading the replies. As a result, in time I may return with a more refined round 2 question. (Not that there's any comparison, but ... No damn wonder Niven took so long after Ringworld!!) Twang (talk) 04:22, 11 August 2009 (UTC)
I don't understand the 3-body problem
I tried looking at the article and I don't "get" it. Where can I have it explained in simpler terms?--12.48.220.130 (talk) 13:38, 9 August 2009 (UTC)
- What don't you get? The idea is that we have 3 bodies (eg planets or something), and we also have their intial positions and speeds, as well as formula showing how they interact with each other (eg gravity in this case).
- The problem is to find equations describing the positions of the bodies after time t.
- The thing about it is that it's very difficult to solve...
- You're probably familiar with simple 2 body problems such as the motion of a small ball under gravity (which is solved eaasily by assuming that the earth (that causes gravity) is so big that it doesn't move at all (an approximation) - the three body problem is to find the same sort of things for 3 things, with no approximations. (Probably you don't get a lot of the article because it's complicated maths - to be honest - neither do I)83.100.250.79 (talk) 15:15, 9 August 2009 (UTC)
I mean is it of the same nature as Fermat's last theorem or something?--12.48.220.130 (talk) 16:01, 9 August 2009 (UTC)
- No. it's just a difficult set of equations to solve.83.100.250.79 (talk) 16:05, 9 August 2009 (UTC)
- You should also read N-body_problem#King_Oscar_II_Prize_about_the_solution_for_the_n-body_problem which roughly says "stop asking stuff about things which you have no way of knowing if you've got the answer or not or fuck off" 83.100.250.79 (talk) 16:08, 9 August 2009 (UTC)
- Try starting with something simpler first - do you get the 2-body problem?83.100.250.79 (talk) 16:43, 9 August 2009 (UTC)
Well yeah. That makes sense. So why can't three objects all revolve around the same barycenter as well?--12.48.220.130 (talk) 18:42, 9 August 2009 (UTC)
- They can - but that's just one special case of a three body problem - one which happens to be much easier to solve. It's the general solution that is hard to get...83.100.250.79 (talk) 19:03, 9 August 2009 (UTC)
Well what's an example of a generic case that is hard to find a solution for?--12.48.220.130 (talk) 20:06, 9 August 2009 (UTC)
- A mass 4 at (3,0,0) initial velocity (1,2,2)
- B mass 10 at (3,4,3) initial velocity (0,-2,1)
- C mass 3 at (-1,3,3) initial velocity (7,0,5)
- All subject to gravitational type force (inverse square) eg kM1M2/r2 (units in SI units or whatever)
- What are the positions of A, B and C as a function of time?
- (edited twice)83.100.250.79 (talk) 20:32, 9 August 2009 (UTC)
- What makes generic examples as the one described above is the fact that the bodies will swarm around each other following open orbits (that do not repeat themselves) and will ocasionally suffer arbitrarilly close encounters. The closer the encounter the harder it becomes to predict what happens next due to Oberth effect which implies that an arbitrarily small imprecision in the orbits before the close encounter can turn into an arbitrarily large imprecision after it making the general problem impossible to handle. Dauto (talk) 21:04, 9 August 2009 (UTC)
- The Oberth effect is only one of the many issues that plague a numerical solution to this problem. A naive iterative solution of the gravitational force equation, using Euler method iteration and incrementing the velocity and position of each body for each time step, is numerically unstable, and diverges due to accumulating error. For the non-technical reader: This is the simplest way you might think you can program a computer to solve the gravity equation - just solve for the force, update the acceleration, and update the velocity and position - but it doesn't work! This is the case even for the 2-body problem, which has an analytic solution. See "Inaccuracy and Instability of Euler's method" from the University of Buffalo's Math Department for a graphic visualization of numerical error on a very simple equation. Even some more advanced ordinary differential equation solvers tend towards numerical instability on the force law iteration. This doesn't even consider whether the problem suffers from an analytic instability - this is strictly about propagation of error in the numerical differential equation solver. With an n-body problem, you have a large matrix of coupled differential equations, and you will find that the errors are not only propagating forward in time, but coupling in unusual ways throughout the problem. You certainly have to worry about this issue if you are solving the 3-body problem on a computer. Nimur (talk) 22:10, 9 August 2009 (UTC)
- I remember for the intro programming class I took at school, one of the first things we did was program a solar system simulator that used Euler's method approximation. It generally worked alright if you didn't look too closely, but when objects got very close to each other, they would suddenly get flung off the screen at high speed never to be seen again. Rckrone (talk) 23:08, 9 August 2009 (UTC)
- That's really at the heart of the problem. You can use numerical approaches to get an approximation to the correct answer - and you can make the time steps arbitarily small to get an arbitarily good answer - but the 3 body problem is chaotic in nature - small changes in the short term tend to blow up into arbitarily massive changes in the long term for all but the most stable cases. So you can't ever get a good answer over long time periods using a numerical method with finite precision. With the 2 body problem, the equations exist and can be solved for any arbitary time 't' and you can plug any 't' into the equation and get a good answer. I'm a computer game programmer - and for exactly these reasons, doing N body dynamics problems is one of the hardests parts of what we do. Even simulating something as seemingly simple as a pile of boxes sitting perfectly still on the ground becomes quite tricky in general-purpose dynamics software. If you naively plug in the math and naively simulate them numerically then they start jiggling, then bouncing - then they fly apart at crazy speeds...just like your solar system simulator! All sorts of cheats and kludges are required to make the 'real world' math function believably in a numerically simulated world. SteveBaker (talk) 13:05, 10 August 2009 (UTC)
- I remember for the intro programming class I took at school, one of the first things we did was program a solar system simulator that used Euler's method approximation. It generally worked alright if you didn't look too closely, but when objects got very close to each other, they would suddenly get flung off the screen at high speed never to be seen again. Rckrone (talk) 23:08, 9 August 2009 (UTC)
- The Oberth effect is only one of the many issues that plague a numerical solution to this problem. A naive iterative solution of the gravitational force equation, using Euler method iteration and incrementing the velocity and position of each body for each time step, is numerically unstable, and diverges due to accumulating error. For the non-technical reader: This is the simplest way you might think you can program a computer to solve the gravity equation - just solve for the force, update the acceleration, and update the velocity and position - but it doesn't work! This is the case even for the 2-body problem, which has an analytic solution. See "Inaccuracy and Instability of Euler's method" from the University of Buffalo's Math Department for a graphic visualization of numerical error on a very simple equation. Even some more advanced ordinary differential equation solvers tend towards numerical instability on the force law iteration. This doesn't even consider whether the problem suffers from an analytic instability - this is strictly about propagation of error in the numerical differential equation solver. With an n-body problem, you have a large matrix of coupled differential equations, and you will find that the errors are not only propagating forward in time, but coupling in unusual ways throughout the problem. You certainly have to worry about this issue if you are solving the 3-body problem on a computer. Nimur (talk) 22:10, 9 August 2009 (UTC)
- A couple decades back I wrote a program to simulate a ship launched from Earth orbit towards the Moon's future position. It was designed so that the user had to find the right set of initial values to get the ship to orbit the Moon at least once. To make it as realistic as possible (but 'fly' in reasonable CPU time for that day), I consulted with a math prof and we came up with a Runga-Kutta 'solution' that could be quite accurate.
After toying with that for several months, I developed a MUCH deeper appreciation for any team that managed to get a real satellite into lunar orbit ... Twang (talk) 04:43, 11 August 2009 (UTC)- Yep - and that's not even a proper 3-body problem since the gravitational force exerted by the satellite onto the earth and moon is negligable. SteveBaker (talk) 13:03, 11 August 2009 (UTC)
- Righto - I think I figured that if the 'restricted 3-body problem' was tough enough for Euler, it was tough enough for me ;-) (Some interesting background on how the old heavy-lifters got some work done anyway here. ) Twang (talk) 08:00, 12 August 2009 (UTC)
- Yep - and that's not even a proper 3-body problem since the gravitational force exerted by the satellite onto the earth and moon is negligable. SteveBaker (talk) 13:03, 11 August 2009 (UTC)
- A couple decades back I wrote a program to simulate a ship launched from Earth orbit towards the Moon's future position. It was designed so that the user had to find the right set of initial values to get the ship to orbit the Moon at least once. To make it as realistic as possible (but 'fly' in reasonable CPU time for that day), I consulted with a math prof and we came up with a Runga-Kutta 'solution' that could be quite accurate.
What is the name of this insect?
Does anyone know the name of this insect, photographed in South Germany? It must be approximately 2 cm long. Thanks a lot... --Edcolins (talk) 18:00, 9 August 2009 (UTC)
-
Unknown insect, first picture.
-
Unknown insect, second picture.
- Nice photo, this site should be able to help you. [11]. 86.4.181.14 (talk) 21:32, 9 August 2009 (UTC)
- Could it be a firefly/lightning bug? Firefly is found here. Bus stop (talk) 21:55, 9 August 2009 (UTC)
- His name is Friedrich, and he would be happy to autograph your pictures. B00P (talk) 00:41, 10 August 2009 (UTC)
- Actually it's his brother Willem, he parts his antennae the other way. 86.4.181.14 (talk) 06:16, 10 August 2009 (UTC)
- Thanks for your answers... Could it be a female stictoleptura rubra (stictoleptura rubra) maybe? --Edcolins (talk) 18:42, 10 August 2009 (UTC)
What the heck is going on in this video?
http://strangepaths.com/canon-1-a-2/2009/01/18/en/
--12.48.220.130 (talk) 18:35, 9 August 2009 (UTC)
- Nothing much. The score sounds musical played from left to right as well as from right to left, and still sounds musical when both are played together. The mobius strip in the video is just a visualisation and (doesn't seem) to have anything particularily to do with it - the music could have been written on one side of a normal ring of paper and it still would have worked.
- Was there something else mysterious.?83.100.250.79 (talk) 19:01, 9 August 2009 (UTC)
- After edit conflict - The musical score is unfolded into a Moebius strip, which has unique mathematical properties. I'm pretty sure this is only a loose analogy to the musical score, though - notice that the note-bobs lose synchronization with the audio while traversing the score in Moebius strip format. Nimur (talk) 19:03, 9 August 2009 (UTC)
- @83.100.250.79: It would NOT have worked, as the staff is "turned upside down" for the part of the table canon. --Cookatoo.ergo.ZooM (talk) 21:50, 9 August 2009 (UTC)
- I didn't notice that.83.100.250.79 (talk) 22:57, 9 August 2009 (UTC)
- @83.100.250.79: It would NOT have worked, as the staff is "turned upside down" for the part of the table canon. --Cookatoo.ergo.ZooM (talk) 21:50, 9 August 2009 (UTC)
- Yes, it does work. You need to have the staff be upside down on the “back” side before doing the twist, in order to have it be right side up after the twist. To check that it works, try it by writing a line of text on a thin strip of paper, and turning it into a Moebius strip by following the video (I did). The sync is a little off when the Moebius strip is playing, in that the music starts about one whole note later than it should, but other than that, it’s accurate. If the sync looks way off for part of it, it’s because the music being played at that point is on the “back” of the strip at that point, not the “front” part that you can see. Notice that the “cursors” are solid on the side of the paper that’s being played at the moment, and have a gap on the “back” side of the paper, that isn’t being played. When following the cursors, it also helps to remember that the balls on the cursors are on the “up” side of the staff, when the cursor is viewed from the side of the paper that’s being played. Red Act (talk) 01:11, 10 August 2009 (UTC)
- There's no good reason to put it on a Moebius strip or any sort of loop at all, since the piece doesn't loop. They play it through once in both directions at once and when they get to ends they stop. What makes the topology of a Moebuis strip or a regular loop interesting is what happens at the ends or when we go around in a full circle, but nothing like that is relevant here. Rckrone (talk) 01:36, 10 August 2009 (UTC)
Changes in DNA
Is an acquired mutation in the DNA still being instructed to create the mutated cells still controled at the mRNA level, telling the body that even though you were not born with certain gene mutation but it may have developed because of environment or lifestyle are those mutated cells controlled by the RNA still? —Preceding unsigned comment added by 71.155.212.203 (talk) 20:58, 9 August 2009 (UTC)
- I can't make head or tail of your question. Why don't you try elaborating it a little bit more? Please do not refrain from using proper punctuation. Dauto (talk) 21:14, 9 August 2009 (UTC)
If there is a mutation in the DNA that someone is not born with, for example cancer cells that is not inherited rather is a result from environmental factors, are those cells still directed by the RNA telling or continuing to give the bad/mutated genes or cells and continue to make the mutated genes/cells (it doesn't come from few bad cell that breaks away to duplicate other cells)?
- You still aren't making such sense. For example, what does "give the bad/mutated genes or cells" mean? However, the DNA replication process isn't likely to be affected by small mutations - the RNA, DNA polymerase, etc. will all do what they usually do. --Tango (talk) 22:19, 9 August 2009 (UTC)
Your question appears to violate universal grammar. I'll try to make some sense of it though. Cells with acquired mutations can purge them with DNA repair enzymes; I imagine DNA repair enzymes are located in protected regions of the genome in such a way that for those loci to acquire mutations would require some pretty massive damage (such massive damage would trigger apoptosis and kill the cell). However cancer cells probably arise where mutations knock out DNA repair enzymes, cell cycle control genes, etc. through the generations and it's done gradually enough that the cell doesn't go into apoptotic shock.
Are you asking whether damage to RNA post-transcription factors could lead to mutations? John Riemann Soong (talk) 13:36, 10 August 2009 (UTC)
- This is my best guess at the parsing of the OPs two paragraphs:
- "Is mutated DNA (which is still being instructed to create mutated cells) still controled at the mRNA level? Is mutated DNA still controlled by RNA?"
- "If there is a new mutation in the DNA, for example in cancer cells, are those cells still directed by the RNA to make mutated genes or cells? Or do these new genes or cells come from a few bad cells that break away to duplicate other cells?" 89.240.199.45 (talk) 13:57, 11 August 2009 (UTC)
Attachment for cooling cars pre-ac?
I was at a classic car show and saw an attachment on the window of a Nash Rambler. The owner said it was for cooling the passenger compartment when traversing the desert in the Southwest US. Drivers would rent the device at one end, which would be filled with ice and attached to the window. At the other end of the journey, the device was then refilled with ice and rented to another driver going the opposite direction. What is the actual name of this attachment, and where can I find more details? DarkAudit (talk) 22:59, 9 August 2009 (UTC)
- Car cooler. -96.255.161.148 (talk) 01:48, 10 August 2009 (UTC)
- That's it. Thanks!. DarkAudit (talk) 01:57, 10 August 2009 (UTC)
- I love this place!!!!! Especially the comedy double acts!!!!! 06:14, 10 August 2009 (UTC) —Preceding unsigned comment added by 86.4.181.14 (talk)
August 10
Alice
Arg, this is driving me crazy. In Australia, isn't there some animal, or something to do with animals, that the term "alice" is applied to? Any help is appreciated. Thx. --207.206.137.204 (talk) 01:47, 10 August 2009 (UTC)
- I'm not from Australia, but googling turned up a lot of Australian slang sites that all related "Alice" to Alice Springs, Northern Territory. There was also Alice the Pig. I wish I could have found more for you. I'm sure some of our Australian editors will be by shortly to assist. 152.16.59.102 (talk) 02:13, 10 August 2009 (UTC)
- I've got that too , I'm fairly certain it's a nickname for the spiny euchidna (they call them alices), curiously there is absolutely nothing to prove this. Did you know that the platypus is austrlias only poisonous mammal?83.100.250.79 (talk) 02:23, 10 August 2009 (UTC)
- @83.100: Considering how rare venomous mammals are, that's not much of a surprise, is it? --Scray (talk) 03:46, 10 August 2009 (UTC)
- Subtle recommendation to use the term venomous by Scray noted -- "poisonous" refers to organisms that affect their predator upon consumption (or heterotroph, more specifically), whereas "venomous" more precisely refers to those organisms that envenomate other organisms without the need for consumption. I don't think the spur is a "last-licks" on the part of the male platypus to "get" the guy that eats him. DRosenbach (Talk | Contribs) 14:14, 10 August 2009 (UTC)
- Thanks for highlighting that - it's an important distinction. --Scray (talk) 01:54, 12 August 2009 (UTC)
- Subtle recommendation to use the term venomous by Scray noted -- "poisonous" refers to organisms that affect their predator upon consumption (or heterotroph, more specifically), whereas "venomous" more precisely refers to those organisms that envenomate other organisms without the need for consumption. I don't think the spur is a "last-licks" on the part of the male platypus to "get" the guy that eats him. DRosenbach (Talk | Contribs) 14:14, 10 August 2009 (UTC)
- @83.100: Considering how rare venomous mammals are, that's not much of a surprise, is it? --Scray (talk) 03:46, 10 August 2009 (UTC)
- I'm Australian and I've never heard of Alice as a nickname for an animal. It is definitely used to refer to Alice Springs and perhaps sometimes as a nickname for a place like it, a dry remote town, of which there are a lot of in the outback. Vespine (talk) 03:24, 10 August 2009 (UTC)
You also have lice in Australia but you don't say "a lice" you would say a louse. Graeme Bartlett (talk) 21:48, 10 August 2009 (UTC)
- You could however say all lice which would sound the same. Googlemeister (talk) 13:17, 11 August 2009 (UTC)
- There is a koala called Alice in something called Animal Crossing.She is named for Alice Springs, about the only thing abbreviated to "Alice" here. - KoolerStill (talk) 20:17, 11 August 2009 (UTC)
Total Perspective Vortex IRL
Has an effect comparable to that of the Total Perspective Vortex from The Restaurant at the End of the Universe been observed e.g. in astronomy students? If so, how is it treated? NeonMerlin 02:52, 10 August 2009 (UTC)
- Well there certainly haven't been any proven cases of "brain annihilation!" All facetiousness and humor aside, the controversial concept of Depressive realism is probably the closest concept. As for Astronomy students, they are probably some of the most grounded people, if only because they tend to form tigh-knit groups since they are often so few. Besides, our understanding of astronomy isn't nearly as wide-reaching as everything. ;) ~ Amory (user • talk • contribs) 03:09, 10 August 2009 (UTC)
Evolution and Paganism
I've heard that the theory of evolution has pagan origins in Babylon, 2000 years before Christ. Is that true?
Bowei Huang (talk) 04:04, 10 August 2009 (UTC)
- No. No, it is not. Algebraist 04:15, 10 August 2009 (UTC)
- And even if it were, scientific theories are to be judged on the veracity or falsehood of their predictions, not on their origins. —Preceding unsigned comment added by 81.11.170.162 (talk) 06:03, 10 August 2009 (UTC)
It wouldn't surprise me if that was true, to some limited extent - coming up with the concept of animals adapting over time to fit their surroundings is not an immense leap of intellect. Some pagans quite easily could have seen, say, a green insect living in grasslands and a similar-looking but brown insect in a nearby forest. From there it's not too hard to suggest that perhaps those two animals "evolved" to fit their surroundings. However, having said that it's far from being the "origin" of the theory of evolution - for one, there are very limited records from that far in the past, so the chances of any reasonable scientific thought surviving to be verified in the present day are very slim indeed. So yes - ideas that were perhaps related to evolution quite possibly were thought of that long ago, but it's unlikely that any evidence remains, and even if so it's unlikely if any of it was used in the formulation of the modern theory. ~ mazca talk 07:58, 10 August 2009 (UTC)
- It is possibe that there were early theories of evolution, just as there were early theories of cosmology and early atomic theories. However, today's theories in these fields do not "have their origins" in the earlier theories. Today's theories in all three fields originated independently of the earlier theories. This is not true for all scientific theories: for instance, medicine, agronomy, and chemistry (and their theories) can be traced more or less continuously back to antiquity, even though the modern theories in these fields bear little relationship to those in antiquity. -Arch dude (talk) 12:11, 10 August 2009 (UTC)
- I would have thought the the notion of breeding to develop characteristics (e.g. domesticating dogs etc) are likely to be old enough for this to be plausibly dating 2000BC. However on "pagan origins in Babylon, 2000 years before Christ" I think you may have misheard someone talking about the Biblical creation narratives which certainly derive in parts (order from chaos etc) from their Babylonian predecessors (or so we are taught in school). --BozMo talk 12:25, 10 August 2009 (UTC)
- I think the OP is really asking whether the hypothesis of evolution was around back then - and I think it's extremely likely that it was. However, turning a hypothesis into a theory (in the scientific meaning of the term) is a more formal process - and that was certainly not done back in those early times. Merely having an idea that fortuitously turns out to be right doesn't qualify you as the inventor of a theory. It's only when observations, experiments and careful testing are performed and can exclude other possible causes that a hypothesis can be labelled as a theory in the scientific meaning of that word. There is no evidence that I could find that the Babylonians did that (and it's very unlikely that they would - the 'scientific method' is really only a couple of hundred years old). SteveBaker (talk) 12:51, 10 August 2009 (UTC)
- People have understood the practical implications of evolution for thousands of years, even if they didn't have an understanding of molecular genetics. Basic concepts of breeding have existed for 10,000 years. People have long understood that one can control which traits are passed on through offspring to create slow changes in a population. There is no fundemental difference between traits that are encouraged by deliberate human intervention versus traits that are encouraged by adaptation to a changing environment. The only significant barrier to the modern theory of evolution is only the time scales involved. Once you detatch yourself for the need for the earth to only be 6000 years old, and are willing to accept an earth that is billions of years old, then the rest of it falls into place pretty easily. --Jayron32 18:20, 10 August 2009 (UTC)
Yet I don't think anyone before the 19th ct. made that connection. The principles of selection-by-man were not extended to create the concept of selection-by-nature. Answering the original question - no, the scientific theory of natural selection is not known to have been inspired, directly or indirectly, by any non-Christian beliefs. On the other hand, there are many cases of stories about species developing from each other through some kind of mystical force or magic, or through the will of a deity (thus, not through evolution in the modern scientific sense of the word). One commonly occurring belief is that some or all animals are descended from humans who were transformed into animals for one reason or another (sometimes as punishment for some transgression, but in other cases they are regarded as ancestors worthy of veneration). The opposite direction of development is less common, but not unheard of. I think I recall that in the creation myth of a certain Australian aboriginal tribe, fish miraculously turned into lizards, lizards turned into some kind of mammals and the mammals turned into a humans. I can't find the reference though, and I can't find any mention of this elsewhere, so I might be wrong. I do, however, find sources saying that in a couple of tribes in Tibet and in South Africa, humans were said to originate from apes or monkeys. It's a nice illustration of the difference between religion and science - the claim can happen to be the same, the difference is in the explanations and the methods to reach it.--91.148.159.4 (talk) 21:38, 10 August 2009 (UTC)
Bowie, if you're interested for a careful, interesting historical account about the development of evolutionary theory—which has its origins long before Darwin, and indeed has interesting connections to ideas about society, morality, and religion!—check out the two-volume biography of Darwin by Janet Browne. It does not strive to convince you of anything you don't want to believe (you can keep the wool in your ears if you'd like), but it will give you a much deeper understanding of where these ideas came from. The truth of it is far more interesting (and potentially more scandalous!) than anything your conspiracy theories will have up their sleeves. --98.217.14.211 (talk) 00:10, 11 August 2009 (UTC)
- It's fairly well established that the "ancient" Greek astronomers learned much from the (far more ancient) Babylonians about astronomy. So the ancient Babylonians were certainly trying out their powers of observation to help them make predictions, not just consulting sheep intestines.
In a long lifetime of science reading, I've never heard anyone make the remarkable claim that the Babylonians invented a theory of evolution -- but I can imagine such a speculative hypothesis arising in modern times, because I heard people like H.W. Armstrong baying at the moon on AM radio. Twang (talk) 06:39, 11 August 2009 (UTC)
What was this pagan origin of evolution that was in Babylon 2000 years before Christ? What was it?
I have read about this claim in the section "2. Evolution" in Chapter 3: The Wisdom of Man in the book Mind Siege: The Battle for Truth in the New Millenium by David Noebel and Timothy LaHaye.
Bowei Huang (talk) 01:08, 12 August 2009 (UTC)
- I'd be interested in seeing Noebel's pamphlet "Communism, Hypnotism And The Beatles." I just *knew* those mop-tops were up to no good. Twang (talk) 07:45, 12 August 2009 (UTC)
- I know it doesn't seem open-minded, but I would recommend you ignore anything David Noebel has to say about humanism or evolution. The claims that you've read and come to ask us about have been complete rubbish, and the author seems (in my opinion, not that of the RefDesk or Wikimedia) to be a liar.
- Twang, you have listened to Imagine, right? AlmostReadytoFly (talk) 08:10, 12 August 2009 (UTC)
- It's Lennon, not the Beatles per se. He did have an activist period, but was always a Hippie-style leftie, not a Comintern-style one. Only someone wildly right-wing can fail to see a difference between the two. --91.148.159.4 (talk) 22:52, 12 August 2009 (UTC)
Relativistic Doppler effect-not theta_s?
I am trying to derive the formula
in Relativistic Doppler effect#Motion in an arbitrary direction. I used an equivalent of Lorentz transformation to transform the light cone for an observer, A, to the shape in a coordinate system for another observer, B. A point at the edge of the light cone for A in the coordinate system A, with an angle around t-axis in the x-y plane, starting from x-axis, , is
times a distance from origin after transformation. (In Lorentz transformation and Relativistic Doppler effect, directions of v seems opposite, and this is in Relativistic Doppler effect way)
I think this is the rate of change in wavelength. Changing it to frequency,
- .
This is like the one at the beginning, but with instead of . How can I derive the correct one? Like sushi (talk) 05:03, 10 August 2009 (UTC)
- That formula can be obtained by combining the effect due to the movement of the source away from the observer (that's the same effect that gives you the non-relativistic doppler effect) with an extra gamma factor due to time dilation. The first effect gives you a factor
- and the second effect gives the factor
- It is as simple as that. Dauto (talk) 05:43, 10 August 2009 (UTC)
- Alternatively, you can use the fact that and form a 4-vector in the observer's reference frame and apply a Lorentz transformation to get in the sources reference frame. Choosing the x-axis along the direction of the source motion, we have
- But we also have , where the minus sign is due to the fact that the source is assumed to be moving away from the observed while the light ray must be moving towards the observer (otherwise it would never be detected). Putting all that together with the simple formula we get
which yields the desired formula. Dauto (talk) 06:16, 10 August 2009 (UTC)
- Thank you for quick answer. But why is it not but ? I do not understand the alternative explanation. And I hope you will answer in a way that guides me from what I supposed in the first post.
- Like sushi (talk) 06:31, 10 August 2009 (UTC)
- The angle comes about when you take the component of the source velocity along the line connecting source and observer. That velocity is measured from the point of view of the observer (from the source's point of view it is not moving at all, obviously) which means that is the correct angle. Dauto (talk) 06:52, 10 August 2009 (UTC)
- Here's a nice simple way to derive the redshift without coordinates. At the end I'll introduce coordinates and get back the usual formula. I'll use "1+z" for the ratio of received wavelength to transmitted wavelength because it's just about the only standardized notation for redshift out there. Ignore the added 1 and just think of "1+z" as a single symbol.
- Let xs and vs be the sender's spacetime location and four-velocity at the time of sending and let xr and vr be the receiver's location and velocity at the time of receiving. Let X = xr − xs be the separation between them. Note X is a lightlike vector because xs and xr are connected by a light signal.
- The sender waits an interval dτ, measured on her wristwatch, and then sends a second signal (or a second wavefront of the same light beam, if you prefer). The receiver receives this after an interval (1+z)dτ, measured on his wristwatch. (This is the definition of the redshift 1+z.) These second sending and receiving events also have to be separated by a lightlike vector—that is,
- It's now just a matter of solving this for 1+z. Multiply out the square to get
- The first term disappears because X is lightlike and the third term is negligible because we're assuming dτ is small. Dividing what's left by 2 dτ and rearranging we get
- which is the coordinate-free redshift formula. I don't know why anyone would want to uglify it by introducing coordinates, but here goes. Let X = (Δt, Δx) and vs = (γs, γsvs) and vr = (γr, γrvr). Then we have
- Now Δx/Δt is a vector with magnitude 1 (= c), so (Δx/Δt)·v gives the component of v along the path of the light, which I'll call v||. Thus
- which I'll grant you is also pretty easy to remember, though you have to be careful about the signs. As I've defined it, v|| is positive for motion in the same direction as the light. Usually people pick coordinates where the receiver is at rest, in which case . Then they introduce an angle θ instead of writing v|| and you have to remember how the angle was defined and whether it's a sine or a cosine and whether it's added or subtracted along with everything else and it just becomes more and more confusing, so I'm going to stop here. Incidentally, the coordinate-free formula works in general relativity also if you suitably interpret X (it can't be a vector anymore because the light signal crosses a large region of spacetime where curvature can't be neglected). You can derive the gravitational redshift and cosmological redshift formulas from it by choosing different coordinates and background geometries. -- BenRG (talk) 10:44, 11 August 2009 (UTC)
Ring Singularities
In a rotating black hole there is supposed to be a ring singularity, and if you fall through it you go to a negative universe(universe with gravity repulsive). Is there space in the middle of a ring singularity? I imagine it to be no, and you fall through the ring singularity to the other side of the spacetime surface, and because the spacetime(or only time) is curved "downwards" from the original universe, the spacetime is curved "upwards" on the other side, so gravity is repulsive. I also imagine that the fields may travel through the spacetime surface so that the only thing different about the negative and the ordinary universes are the gravitational fields.
The Successor of Physics 05:59, 10 August 2009 (UTC)
- I've never heard of this "negative universe". I think you just end up in a new universe with the same laws of physics (in fact, if it is possible to travel between the two it would be reasonable to consider then parts of the same universe). I think you would come out of a white hole, but they aren't repulsive, they actually look identical to black holes to an outside observer (this is very counter-intuitive, but it is what the maths says). --Tango (talk) 11:43, 10 August 2009 (UTC)
- There is a region of repulsive gravity through the ring singularity in the Kerr-Newman metric. That's not a "universe with gravity repulsive", though, it's just the equivalent of a negative-mass object in our universe. If you brought two ordinary objects through the ring singularity they would still attract each other. Probably that region of the solution doesn't have any physical significance. Don't make the mistake of thinking that attractive gravity is "downwards" curvature and repulsive gravity is "upwards". The curvature is intrinsic—there's no up and down. The difference between attractive and repulsive gravity is more like the difference between elliptical and hyperbolic space. You might be thinking of the "gravity well" or "rubber sheet" picture of Newtonian gravity, where a valley is attractive and a hill is repulsive. A lot of books confuse that with spacetime curvature. -- BenRG (talk) 20:54, 10 August 2009 (UTC)
- On a tangent, it's kind of funny when people talk about or movies and tv shows show things going "through" a black hole into a new universe or back in time, etc. Fraser Cain on the Astronomy Cast podcast had a good line about this. He said it's like a frog looking up at a blender and wondering "If I jump inside the blender will I go to a new universe? Or looking at a trash compactor and wondering if you can go to a new dimension. Unfortunately, if you go into a black hole, you just end up being blended and compacted into the stuff that's in the singularity itself (whatever form of stuff that is). 63.95.36.13 (talk) 22:00, 10 August 2009 (UTC)
- An idealised black hole is a connection to "another universe", although it is impossible to actually travel between them, even if you could avoid being ripped to pieces, the connection doesn't exist long enough for even light to traverse it. However, even that doesn't matter because real black holes aren't ideal, when a black hole forms from the collapse of a star (rather than existing forever) the connection never exists in the first place. It is best depicted using a Penrose diagram like this one. Roughly speaking space is horizontal and time is vertical with up being forward in time - only one dimension of space is shown, the other two are the same, though. Travelling at the speed of light corresponds to travelling along a 45 degree line, travelling slower than light means being closer to vertical than that, that is why you can't leave the black hole once you are in it, you would have to move along a line more than 45 degrees off vertical, which means travelling faster than light. The connection between the two universes is a single point, you can't get through it without ending up in the black hole. (Ignore the electrically charged/rotating version - that's just weird! That is where the ring shaped singularities come into it, though.) --Tango (talk) 00:20, 11 August 2009 (UTC)
- Thanks!
The Successor of Physics 04:36, 11 August 2009 (UTC)
First major sport to get the Deep Blue treatment?
Interesting line of discussion, I think...
Which major sport will be the first to get the Deep Blue treatment -- i.e., someone creates a robot that can match (if not exceed) the best human athlete?
Now certain sports like target shooting could almost certainly already be "solved" if anyone bothered, although sporting clays would present some difficulty!
But restricting it to major sports, which do you think would be easiest to beat? Which would be the last to go down?
Personally, I think golf will be the first to fall because it lacks the collisions and speed of other sports. The range-finding and condition assessment would seem perfect for a computer.
As for the last sport to fall? I think it would probably be basketball - satisfying the dribbling requirements and keeping track of the ball in such a confined, cramped space would present all sorts of difficulties... and that'd be after you solved all the basic mobility challenges...
What says the mighty Science Desk?
218.25.32.210 (talk) 07:54, 10 August 2009 (UTC)
- I think that this is beyond our wisdom (no offence, anyone), but first, do you mean with robots performing the physical side of things? If not, what do you propose instead? Human bodies controlled by computer? And do other board games like Go count as "sports"? If so, I'd guess we'll crack them all first. Of course, by "board game" I mean "discrete" game, in which the set of possible states is finite. Even relatively simple games like pool are principally continuous, with an infinite number of states, though one could probably discretize the table into squares at minimal loss of performance. --Leon (talk) 08:56, 10 August 2009 (UTC)
- Beyond whose wisdom? Here's a video of my classmates' robot playing Shuffleboard. Clearly, computers no longer need to stick to nerdy games like "chess" and "Go" - soon robots will be lining up on cruise ship decks and hogging all the shuffleboards with their precise, calibrated technique! Nimur (talk) 16:12, 10 August 2009 (UTC)
- I thought I explained it well enough, but I guess not. Fully autonomous robots competing shoulder to shoulder against humans. Go, however much its proponents made enjoy trumpeting its complexity, is quite clearly not a "major sport" - let's keep it on topic! 218.25.32.210 (talk) 09:23, 10 August 2009 (UTC)
- In that case, I haven't a clue. And I'm not convinced that the question is very clear. For instance, are the robots allowed some sort of "telepathy", meaning invisible radio contact between them? The rules of sports don't specify that humans can't be telepathic, to my knowledge! Are we placing limits on size (mass and volume) of these machines? If not, couldn't quite simple robots pummel humans with ease, in sports like boxing? Are robots allowed wheels, or must they have legs, like humans? With wheels, I'd imagine we could engineer some very fast robots. --Leon (talk) 09:32, 10 August 2009 (UTC)
- What are you defining as a major sport? You've already ruled out target shooting, which does seem an obvious choice.
- The men's world record for discus is only 74.08 m, whereas clay pigeon traps can shoot up to 100m, according to our article. Hammer throw would also be a relatively easy problem to solve.
- I understand getting humanoid robots to balance is a difficult problem, which suggests sports involving lots of balancing and moving around would be difficult (e.g. basketball as suggested, gymnastics). Swimming might be easier, with the possibility of very hydrodynamic designs. AlmostReadytoFly (talk) 09:55, 10 August 2009 (UTC)
- In that case, I haven't a clue. And I'm not convinced that the question is very clear. For instance, are the robots allowed some sort of "telepathy", meaning invisible radio contact between them? The rules of sports don't specify that humans can't be telepathic, to my knowledge! Are we placing limits on size (mass and volume) of these machines? If not, couldn't quite simple robots pummel humans with ease, in sports like boxing? Are robots allowed wheels, or must they have legs, like humans? With wheels, I'd imagine we could engineer some very fast robots. --Leon (talk) 09:32, 10 August 2009 (UTC)
- Against topic drift, the gods themselves contend in vain. (Redlink?!) —Tamfang (talk) 04:51, 11 August 2009 (UTC)
OP back, now at home hence the different IP. Here, I'll throw out some guidelines for the sake of discussion.
Rule 1 Robot must have a body similar to a human - 2 legs, 2 arms, walk upright, similar articulation (elbows, knees, ankles), sensors in the "head", dimensions equivalent with professional athletes of the same sport -- weight is unrestricted in non-contact sports (golf, tennis, swimming), but must also be equivalent in contact sports (football, rugby, sumo)
Rule 2 Robots may not communicate with teammates in any fashion that a human could not - so no infrared, no wi-fi - only auditory / visual / gesture based communication
Rule 3 Robots are autonomous during competition, not remotely controlled.
Off the top of my head, let's confine it to the following sports: swimming, track & non-throwing field (pole vault, high jump, etc), wrestling, sumo, American football, world football, golf, tennis, badminton, basketball, baseball, ice hockey, volleyball, and cycling.
I think cycling is particularly interesting - the energy efficiency advantages would be offset as it'd have to balance itself on a bicycle and rely on cameras for depth perception and road surface interpretation... 213.146.164.143 (talk) 12:05, 10 August 2009 (UTC)
- My kid used to have a radio-controlled toy motorcycle. It balances very easily without any clever software, cameras or anything else. Once a bike is moving fast enough, the balance is rather automatic. SteveBaker (talk) 14:22, 10 August 2009 (UTC)
- I don't know what qualifies you to set up the rules. You asked a question - the answer doesn't necessarily conform to your guidelines! Actually, your 'rules' are incredibly stupid...why should (say) a robot soccer player have to look and speak like a human? We didn't require Deep Blue to use neurons to think with - why should a robot have to have things like arms and legs and communicate with it's teammates using crappy audio links? Do you require 'eyes' to be made with a gelatinous lens projecting the image on to a curved interior surface - instead of just using off-the-shelf cameras? Do we have to build our audio detectors using fluid-filled chambers with little hairs protruding into them instead of microphones? Drawing the line where you drew it is an entirely arbitary decision - and one that completely precludes us from researching a proper answer. What you are asking is really "When will the first fully humanoid robot be built?" and that's not at all the same question - and because the definition of 'fully humanoid' is an arbitary one too - we're not going to be able to answer that one if you nail down the preconditions so tightly. It's like asking "When will the first robot appear that's painted pink with little blue stripes?"...the answer can only be "Nobody knows until it happens". SteveBaker (talk) 12:39, 10 August 2009 (UTC)
- Ping pong was the first physical sport to be attacked robotically...without a doubt. A guy called Russell Anderson built a fairly successful ping pong playing robot back in 1986 - he even wrote a book about it: [12]. There were robot ping-pong contests held all over the place back in the 1980's - research into the subject more or less fizzled out once it was realised that the problem was pretty much solved. There is currently quite a bit of interest in robot soccer - and (to 'level the playing field') "segway soccer" between humans and robots. Someone mentioned shooting - there are several robotic paintball guns out there that can out-shoot a human with ease...especially on moving targets...switching out the painball gun for a 'real' gun would be a little dangerous - and doesn't really prove anything. Robotic gliders have beaten the human glider endurance record. It would be completely trivial to build a robot that could beat a human on any track running event...in fact anything like the shot putt, discus, javalin, etc should be entirely trivial to win robotically. In case you insist that the robots use legs for running...let me point out that I can build a robot to beat people in the wheelchair track events at the para-olympics when legs are specifically not allowed in the rules! SteveBaker (talk) 12:39, 10 August 2009 (UTC)
- Which glider record were you thinking of, Steve. This article
claims a team is still trying to reach a 142-mile robotic flight while the human record seem to be 2200 km by Steve Fossett. 75.41.110.200 (talk) 14:52, 10 August 2009 (UTC)
- You might like Robot competition. Personally my favourite is the dance competition. How long till the judges say robots are more artistic, have better costumes, express the music than humans? Next they'll be competing in another athletic sport as in A.I. Artificial Intelligence... Dmcq (talk) 14:02, 10 August 2009 (UTC)
- I would imagine that you could design a robotic pitcher for baseball where one of it's arms is essentially a cannon capable of shooting the ball at a speed too high for a human player to hit, say 300 mph. That would far surpass any human achievements in that part of the sport. Even if he strikes out every time he bats, it would still be a major net gain for the team, so you wouldn't even have to program that part. 65.121.141.34 (talk) 16:12, 10 August 2009 (UTC)
- I suppose Pitch-o-mat 5000 was just a modified howitzer? Nimur (talk) 21:13, 10 August 2009 (UTC)
- I would imagine that you could design a robotic pitcher for baseball where one of it's arms is essentially a cannon capable of shooting the ball at a speed too high for a human player to hit, say 300 mph. That would far surpass any human achievements in that part of the sport. Even if he strikes out every time he bats, it would still be a major net gain for the team, so you wouldn't even have to program that part. 65.121.141.34 (talk) 16:12, 10 August 2009 (UTC)
'Bacteriocidality' of penicillin
"β-lactam antibiotics work by inhibiting the formation of peptidoglycan cross-links in the bacterial cell wall. The β-lactam moiety (functional group) of penicillin binds to the enzyme (DD-transpeptidase) that links the peptidoglycan molecules in bacteria, which weakens the cell wall of the bacterium (in other words, the antibiotic causes cytolysis or death due to osmotic pressure). In addition, the build-up of peptidoglycan precursors triggers the activation of bacterial cell wall hydrolases and autolysins, which further digest the bacteria's existing peptidoglycan.
Are these cross-links continually constructed during the lifecycle of the bacteria -- otherwise, penicillin should be merely bacteriostatic? Or is the secondary effect the major (I assume it's not, as it's secondary). DRosenbach (Talk | Contribs) 14:04, 10 August 2009 (UTC)
- The cross-linking doesn't have to be continuous - it just has to be necessary for both daughter cells on division. If both daughters die on division then any active colony will collapse, and therefore penicillin would be bacteriocidal (This bit is just a thought experiment - read on for a real answer). If I remember my microbiology lectures correctly, during growth the cell wall is actually continually synthesized "on the inside" (closest to the inner membrane) and broken down by autolysins on the outside. This is to allow for expansion (the newly synthesized cell wall can stretch as it is not yet cross-linked). As, at least under ideal lab conditions, bacteria are continually growing then yes, the cross links are pretty much continually constructed during the lifecycle. 84.12.138.49 (talk) 22:50, 10 August 2009 (UTC)
Tornandos and Hurricanes in US
I didn't hear of a lot of press about a lot of tornados out in the Midwest. Was this a milder year than average? Does that have anything to do with the milder temperatures we had out here on the East Coast? Will that affect how many hurricanes we can expect out here this season? --Reticuli88 (talk) 15:45, 10 August 2009 (UTC)
- For the latter two questions, our understanding of weather is still primitive enough that we can't draw any firm conclusions about wildly disparate weather trends being linked. For example, our tornado article notes a correlation with the Southern Oscillation (El Nino), which is also cited as a rationale for this year's lower-activity hurricane forecast. However, we note that the tornado-SO correlation is weak and moreover ties to winter tornadoes -- which have not yet occurred. Finally, even if borne out, the research doesn't create a causative tie between tornadoes and hurricanes; they would be merely correlated at best. — Lomn 16:12, 10 August 2009 (UTC)
- Going back to the former, our article on tornadoes of 2009 cites 1053 US tornadoes as of 31 July; our tornado climatology article notes that the US reports about 1200 tornadoes annually. I don't find this year to be an outlier in terms of low tornadic activity. — Lomn 16:15, 10 August 2009 (UTC)
- (ec) Generally, the cause of hurricanes in the United States is elevated water temperatures in the eastern Atlantic ocean, spurning west-bound low pressure systems; while the cause of tornados are large pressure variations in the air masses that originated over the western part of North America and are moving eastbound. If these two effects are correlated, or causally linked, I am not aware of any research indicating so. As Lomn pointed out, we don't really have a good model of how global weather patterns interplay - so it's hard to say for sure. Nimur (talk) 16:17, 10 August 2009 (UTC)
- Pedantic nit-pick: I assume you really meant spawning, not spurning? 87.81.230.195 (talk) 00:01, 11 August 2009 (UTC)
- That we haven't heard much about tornadoes this year is mainly a matter of luck; the worst tornadoes have been staying away from population centers, so the death toll has been much lower. While this May was unusually quiet as far as tornadoes go, this summer has been unusually active in the Northeastern United States.
- The formative ingredients for tornadoes and hurricanes are so different, it is really impossible to discuss any correlation between the two with our current understanding of meteorology/climatology. Landfalling hurricanes do tend to produce tornadoes in their outer rainbands, but whether or not a tropical cyclone hits land is also just a matter of luck.-RunningOnBrains(talk) 17:00, 10 August 2009 (UTC)
- (ec) Generally, the cause of hurricanes in the United States is elevated water temperatures in the eastern Atlantic ocean, spurning west-bound low pressure systems; while the cause of tornados are large pressure variations in the air masses that originated over the western part of North America and are moving eastbound. If these two effects are correlated, or causally linked, I am not aware of any research indicating so. As Lomn pointed out, we don't really have a good model of how global weather patterns interplay - so it's hard to say for sure. Nimur (talk) 16:17, 10 August 2009 (UTC)
- Going back to the former, our article on tornadoes of 2009 cites 1053 US tornadoes as of 31 July; our tornado climatology article notes that the US reports about 1200 tornadoes annually. I don't find this year to be an outlier in terms of low tornadic activity. — Lomn 16:15, 10 August 2009 (UTC)
Neodymium Chloride
Hello. Does neodymium chloride (NdCl) exist? Thanks in advance. --Mayfare (talk) 17:48, 10 August 2009 (UTC)
I don't see why not -- its oxidation states probably means it would form analogues to iron chloride. John Riemann Soong (talk) 17:55, 10 August 2009 (UTC)
- Like this maybe Neodymium(III) chloride .83.100.250.79 (talk) 18:09, 10 August 2009 (UTC)
- @ [13] ~£1/g 83.100.250.79 (talk) 18:13, 10 August 2009 (UTC)
- Indeed, similarly to iron, neodymium tends to have a +2 or +3 oxidation state. That means one would expect to have chloride salts NdCl2 and NdCl3 but probably not NdCl. I don't see an article for any ones for any other truly ionic salts (except for the previously-noted Neodymium(III) chloride) or any +2 valence compounds in Category:Neodymium compounds. DMacks (talk) 18:15, 10 August 2009 (UTC)
- (ec)Yes, I think it does. Those, by the way, are the first four hits on Google. ~ Amory (user • talk • contribs) 18:21, 10 August 2009 (UTC)
- There's probably a 1:1 ratio NdCl, but that's a different story, and not the common chloride that you can get in a tin, the orginal question ask-er would have to ask about it if they specifically wanted to know. (feel free)83.100.250.79 (talk) 19:39, 10 August 2009 (UTC)
- There is probably not a stable NdCl monochloride. It does not get a mention in my copy of Advanced Inorganic Chemistry. To get this you may have to look in the gas phase. Graeme Bartlett (talk) 08:49, 11 August 2009 (UTC)
- There's probably a 1:1 ratio NdCl, but that's a different story, and not the common chloride that you can get in a tin, the orginal question ask-er would have to ask about it if they specifically wanted to know. (feel free)83.100.250.79 (talk) 19:39, 10 August 2009 (UTC)
- (ec)Yes, I think it does. Those, by the way, are the first four hits on Google. ~ Amory (user • talk • contribs) 18:21, 10 August 2009 (UTC)
The CRC handbook's table Physical Constants of Inorganic Compounds lists the following:
- NdCl2, CAS # 25469-93-6, green hygroscopic solid, melting point 841 °C
- NdCl3, CAS # 10024-93-8, violet hexagonal crystals, melting point 759 °C, boiling point 1600 °C, density 4.13 g cm−3
- NdCl3·6H2O, CAS # 13477-89-9, purple crystals, decomposes at 124 °C, density 2.3 g cm−3
A search of crystallography databases also lists NdCl2.31 and Nd14Cl33.
Ben (talk) 09:29, 11 August 2009 (UTC)
spirit fire
What proof would an alcoholic beverage need to be before you can light it on fire with a match? would 80 proof be sufficient? I want something exciting for a party. Googlemeister (talk) 18:31, 10 August 2009 (UTC)
- Definitely. Most spirits are around 80 proof and they all light no problem. Be careful, though - flames from burning alcohol can be almost invisible unless the room is quite dark and they can leave the container dangerously hot after the flames are out. --Tango (talk) 18:38, 10 August 2009 (UTC)
- You might find Alcoholic proof interesting. Edison (talk) 18:55, 10 August 2009 (UTC)
- I'd suggest using Bacardi 151 - afaik, it's sort of the standard for flaming shots and the like. It's
shittycheap enough and burns better than the 80%proof stuff. ~ Amory (user • talk • contribs) 19:01, 10 August 2009 (UTC)- I'd avoid that; it burns too well. And for god's sake don't confuse percentage with proof like that. Please see alcoholic proof. Matt Deres (talk) 19:13, 10 August 2009 (UTC)
- Oops, thanks! ~ Amory (user • talk • contribs) 19:55, 10 August 2009 (UTC)
- Bacardi-151 is good, but 190-proof Everclear is better. Alas, it's illegal in too many places now. Twang (talk) 06:48, 11 August 2009 (UTC)
- Oops, thanks! ~ Amory (user • talk • contribs) 19:55, 10 August 2009 (UTC)
- I'd avoid that; it burns too well. And for god's sake don't confuse percentage with proof like that. Please see alcoholic proof. Matt Deres (talk) 19:13, 10 August 2009 (UTC)
- (e/c) Be extremely careful when lighting alcohol. If you're planning on doing a flambé kind of thing, a few quick tips: keep the lid to the vessel in your hand at all times. If the fire gets out of hand, the lid will cut off the oxygen supply. Keep a fire extinguisher within arms reach. And this sounds obvious, but turn off your stove, especially if you're using a gas stove - in fact, take your pan off the heat altogether. Gas plus fire = well, you get the idea. Also, the vapours coming off the alcohol normally ignite first, so expect the flame to start before you'd think you should expect the flame to start. Our article suggests adding cinnamon to the dish; I can't vouch for that myself. Why not try an electric pickle instead? What, no article??? Matt Deres (talk) 19:11, 10 August 2009 (UTC)
- Here's an exciting party trick (I saw it done with some high tequila content mix drink). Get some small shot glasses. Fill it up and light it up. Quickly (before it gets too hot) cover it with your hand's palm extinguishing the fire. As the flame is extinguished it consumes O2 reducing the pressure in the cup enough to make it stick to your palm. Visibly shake your hand up and down mixing your drink Hold back the urge to let people know wheather/that you have slighly burned your hand. Dare other people to do the same. Tease the ones that refuse. Rinse and repeat untill bored or drunk. Make sure you have an bucket with ice "for drinks" near by just in case. Have fun. Dauto (talk) 19:15, 10 August 2009 (UTC)
- Partial-vacuum is also substantially due to cooling of the headspace vapor after the flame is out. Burning does chemically consume the O2, but two thirds of the oxygen gas consumed by burning ethanol winds up as CO2 gas, so not nearly the "gas loss" one might expect. On the other hand, dropping the temperature of a water-vapor/CO2/atmosphere from flame temp to hand temp is a noticeable pressure difference. See also Fire cupping. DMacks (talk) 19:39, 10 August 2009 (UTC)
- I need to reinforce one point for our OP. The light you get from burning alcohol is NOT spectacular. It's almost invisible except in a fairly dark room when there is a faint blue light. To get something impressive there needs to be something besides the alcohol that's being burned. SteveBaker (talk) 12:56, 11 August 2009 (UTC)
Orthodontic braces
I know someone who has braces who is about the mid 20's agewise. Does an adult need braces longer then a teen would to correct the same problem? Googlemeister (talk) 18:37, 10 August 2009 (UTC)
- According to this and this, yes it does, although there are some discrepancies. I am not a dentist (IANAD, that's a new one) but I presume it has to do with the fact that as a teen, one's teeth are still moving into their "final" position and can thus be tampered with more easily. As an adult, the teeth are relatively set, and it's harder to move them without altering all the others. Many still consider it worthwhile because of the long-lasting changes it will likely have. At any rate, if you're considering getting them, you should speak with a dentist to get the full picture. ~ Amory (user • talk • contribs) 18:55, 10 August 2009 (UTC)
- If I'm not mistaken, getting braces also has long-lasting consequences: you'll be wearing a retainer to sleep for the rest of your life if you want your teeth to be straight. I would like to be wrong on this. Vranak (talk) 20:41, 10 August 2009 (UTC)
- Like most answers, it depends. It depends on what needs to be done. There are many types of malocclusions that can warrant the need for braces, and there are issues of minor tooth movement. Even with a full mouth case, there are various levels of severity, that would range from closing some spaces to correcting crossbites and exposing impacted canines. If it's just about closing some spaces, it shouldn't take any longer, but if it's something much more complex, it might take longer than 18 months...but then so might a child who presents with some very complex case. DRosenbach (Talk | Contribs) 21:15, 10 August 2009 (UTC)
- If I'm not mistaken, getting braces also has long-lasting consequences: you'll be wearing a retainer to sleep for the rest of your life if you want your teeth to be straight. I would like to be wrong on this. Vranak (talk) 20:41, 10 August 2009 (UTC)
Questions/suggestions for Fetch (game)
On a whim I was looking at Fetch (game) and noticed the article didn't address some questions I was curious about. (I also posted these question in the article's discussion page, but figured you folks would be more reliable for answers.) First, do all dog breeds like to play fetch instinctively, or are there certain breeds who don't have an inclination for the game without training? It's unlikely that newborn pups play fetch, so at what stage of development do dogs show an interest in the game? And is there a researched evolutionary reason for dogs learning to play fetch (eg maybe dogs have been trained for thousands of years to fetch prey for hunters so the trait is now ingrained)?
And on a related note, what species other than dogs like to play fetch? Will some species of cats or birds play fetch, and if so how much training does it require if any? Is falconry a related activity, for example?
Finally, if anybody has good sources for answers to these questions, I'd recommend appending them to the Fetch (game) article. It would be a nice addition. 63.95.36.13 (talk) 21:52, 10 August 2009 (UTC)
- I know that retrievers are specificially bred to retrieve which is like fetch. I don't know much beyond that. Rckrone (talk) 22:28, 10 August 2009 (UTC)
- I've had an Uncle and Aunt who had a cat that would play fetch, and I don't believe they had tried to teach that particular cat to play fetch. But I would expect this to be a rare behavior in cats. 131.191.87.100 (talk) 23:37, 10 August 2009 (UTC)
- Of the two cats I've had, both have "fetched" toy mice without any training, although as is usually the case with cats they're only letting you play with them, and on their terms. Both these cats eventually figured out that if they chase after the mouse but don't bring it back, the loving human will eventually walk over to where they are and then re-throw the toy. That's not exactly fetch anymore, but they did figure out how to game the system in their favor! ~ Amory (user • talk • contribs) 00:57, 11 August 2009 (UTC)
- I have two Giant Schnauzers who have never in their entire lives even looked after a ball when it was thrown, let alone gone to fetch it. They might fit under your idea of a dog who doesn't have an inclination for the game without training. However, they were both raised in a kennel where there weren't many balls to be fetched, so that may have something to do with it. They are also super couch potatoes...208.65.223.146 (talk) 03:04, 11 August 2009 (UTC)
- Cats'll play with a laser-pen spot for a while too, then lose interest in that. (I don't have any dog data on the subject.)
- Of the two cats I've had, both have "fetched" toy mice without any training, although as is usually the case with cats they're only letting you play with them, and on their terms. Both these cats eventually figured out that if they chase after the mouse but don't bring it back, the loving human will eventually walk over to where they are and then re-throw the toy. That's not exactly fetch anymore, but they did figure out how to game the system in their favor! ~ Amory (user • talk • contribs) 00:57, 11 August 2009 (UTC)
I about 250 million years we will have second Pangaea. But which oneis most likely? Pangaea Ulitma, Amasia or NovoPangaea. What is a novopangaea?--69.229.108.245 (talk) 22:03, 10 August 2009 (UTC)
- According to our Pangaea Ultima article, Novopangaea is just another name for that predicted configuration. As to whether this or Amasia is most likely, I doubt there is any way to tell. 250 million years is a very long way ahead to predict. Mikenorton (talk) 22:14, 10 August 2009 (UTC)
Do South Africa tip (Cape Town) and tip of South America snow every year at basin (not the mountain) but surface level like metro-los Angeles-orange-county type land? Idoubt Cape Town often gets land-level snow altugh it's winter can be bone-chilly. Cape horn is just bad-weather, since it's coastal island, it is unlikely too to have a fixate snow seansons.--69.229.108.245 (talk) 22:21, 10 August 2009 (UTC)
- Cape Town, South Africa, is at 33 degrees south latitude. this the the same distance from the equator as the southern shore of the Mediteranian (straits of Gibraltar, Tangier, etc.) Snow is not likely. By contrast, Cape Horn, at 55.5 degrees south, is much further away from the equator and is famous for nasty winter weather. -Arch dude (talk) 23:02, 10 August 2009 (UTC)
- (After looking as some more pages) Cape town's record low temperatures is -1 degree C, or 30 degrees F. and it's average lows are higher than those of Los Angeles, which is farther from the equator. Cape Horn is considerably farther from the equator than Kiska, in Alaska.
- I'm 28 and in my lifetime we've never had snow at ground level in Cape Town. Cape Town is a coastal city with a Mediterranean climate and quite temperate weather. We regularly get hail a few times during winter yes, but never the slow-falling snow we see on TV! On the other hand we always have snow in the higher lying areas such as the upper slopes of Table Mountain and towns further inland. Ceres, Western Cape is always inundated with Capetonians driving out every year whenever the first snowfalls of the season are reported there. We go crazy for the stuff, we're just not used to it! Also, since you do mention South Africa in your heading, I must mention that we almost certainly get snow in the Highveld areas of the country (cities such as Johannesburg and Pretoria for example), which are 100's of
kmmetres above sea level and very far inland. On an aside, the coldest place in South Africa (and thus also getting regular snow) is Sutherland, a very remote inland town in the Karoo desert most famous for hosting the Southern African Large Telescope, the largest optical telescope in the southern hemisphere. Zunaid 18:51, 11 August 2009 (UTC)- Whoa! "100's of km above sea level" is really high! Like, thermospheric, man! Can they park the ISS there for maintenance? --Scray (talk) 02:05, 12 August 2009 (UTC)
- Oops! I meant metres of course... Zunaid 14:24, 12 August 2009 (UTC)
- Whoa! "100's of km above sea level" is really high! Like, thermospheric, man! Can they park the ISS there for maintenance? --Scray (talk) 02:05, 12 August 2009 (UTC)
- I'm 28 and in my lifetime we've never had snow at ground level in Cape Town. Cape Town is a coastal city with a Mediterranean climate and quite temperate weather. We regularly get hail a few times during winter yes, but never the slow-falling snow we see on TV! On the other hand we always have snow in the higher lying areas such as the upper slopes of Table Mountain and towns further inland. Ceres, Western Cape is always inundated with Capetonians driving out every year whenever the first snowfalls of the season are reported there. We go crazy for the stuff, we're just not used to it! Also, since you do mention South Africa in your heading, I must mention that we almost certainly get snow in the Highveld areas of the country (cities such as Johannesburg and Pretoria for example), which are 100's of
August 11
Does the mass of the earth change with population growth?
Does a batch of newborns add mass to the earth? My feeling would be no, due to the law of conservation of matter. —Preceding unsigned comment added by 12.168.244.134 (talk) 00:07, 11 August 2009 (UTC)
- No, everything the new organisms are made of was already on the Earth, it is just existing matter being rearranged, nothing is created from scratch. There is some change of mass due to the atmosphere escaping, meteors hitting the Earth, etc. and also some due to energy entering and leaving the Earth as radiation (E=mc2), but that's pretty negligible. --Tango (talk) 00:10, 11 August 2009 (UTC)
- You are correct. The mass of a newborn had been counted as part of the mass of the baby’s mother before the baby was born, so childbirth results in no increase of the total mass on the earth. Red Act (talk) 00:25, 11 August 2009 (UTC)
- Even if all newborns actually came from outer space, the mass addition wouldn't matter as far as the Earth is concerned. The Earth has a mass of about 6x1024 kilograms, and if there were seven billion people alive (there aren't) and they all weighed 100 kilograms (220 lbs), that would only be 7x1011 kilos, which is a paltry contribution. ~ Amory (user • talk • contribs) 00:45, 11 August 2009 (UTC)
- A fact which I think is even more counterintuitive which I only really "got" recently is that burning a tree does not decrease any mass either.. The mass of the ashes that are left and the gasses released by the burning actually equals the mass of the tree before it was burned.. I mean I always knew all the "matter" was still there just in a different configuration, but I never really realised that the gas actually had the same mass as the tree. Vespine (talk) 01:06, 11 August 2009 (UTC)
- Strictly speaking, it is marginally less because some of that mass has been converted into energy (E=mc2 again), but since the speed of light is so enormous it is a negligible amount of mass that is lost (and it is only actually lost when that energy gets radiated into outer space). --Tango (talk) 01:18, 11 August 2009 (UTC)
- I think E=mc2 only applies to nuclear reactions. Burning a tree is a chemical reaction. (As is growing it in the first place.) Mitch Ames (talk) 11:25, 11 August 2009 (UTC)
- If you read the article it's quite clear that applies whenever there's a change in mass although as Tango mentioned and I think it's been pointed out before with actual figures the change in mass is negible. See also Wikipedia:Reference desk/Archives/Science/2009 February 24#Conservation of mass or search more in the archives Nil Einne (talk) 11:37, 11 August 2009 (UTC)
- It applies to everything. It just says that mass and energy are equivalent. You think of it as energy having mass, if energy is released its mass goes with it. --Tango (talk) 16:30, 11 August 2009 (UTC)
- I think E=mc2 only applies to nuclear reactions. Burning a tree is a chemical reaction. (As is growing it in the first place.) Mitch Ames (talk) 11:25, 11 August 2009 (UTC)
- Strictly speaking, it is marginally less because some of that mass has been converted into energy (E=mc2 again), but since the speed of light is so enormous it is a negligible amount of mass that is lost (and it is only actually lost when that energy gets radiated into outer space). --Tango (talk) 01:18, 11 August 2009 (UTC)
- A fact which I think is even more counterintuitive which I only really "got" recently is that burning a tree does not decrease any mass either.. The mass of the ashes that are left and the gasses released by the burning actually equals the mass of the tree before it was burned.. I mean I always knew all the "matter" was still there just in a different configuration, but I never really realised that the gas actually had the same mass as the tree. Vespine (talk) 01:06, 11 August 2009 (UTC)
- Would the mass converted into energy while dismantling the tree roughly equal the energy that was turned into mass by capturing the sun when the plant was growing in the 1st place? Would it be completely incorrect to say that the fire is just years of accumulated sunshine released in a (relative) instant? Maybe not strictly correct but rather poetic way to look at it I think. Vespine (talk) 04:54, 11 August 2009 (UTC)
- Once, in answering a child's question "Why is the fire hot?", Buckminster Fuller said that the fire was the sunlight the tree had absorbed "unwinding from the log". Deor (talk) 06:15, 11 August 2009 (UTC)
- Yes, that is a good way to describe it. --Tango (talk) 16:23, 11 August 2009 (UTC)
- Once, in answering a child's question "Why is the fire hot?", Buckminster Fuller said that the fire was the sunlight the tree had absorbed "unwinding from the log". Deor (talk) 06:15, 11 August 2009 (UTC)
- Even if all newborns actually came from outer space, the mass addition wouldn't matter as far as the Earth is concerned. The Earth has a mass of about 6x1024 kilograms, and if there were seven billion people alive (there aren't) and they all weighed 100 kilograms (220 lbs), that would only be 7x1011 kilos, which is a paltry contribution. ~ Amory (user • talk • contribs) 00:45, 11 August 2009 (UTC)
Howard Hughes Medical Institute
Is the Howard Hughea Medical Institute(tax-exempt) classified as a 501c(3) organization under the IRS tax code? —Preceding unsigned comment added by Bmmillar (talk • contribs) 01:04, 11 August 2009 (UTC)
- From the Wikipedia article:
Hughes was the sole trustee of HHMI and transferred all his stock of Hughes Aircraft to the institute, in effect turning the large defense contractor into a tax-exempt charity. For many years the Institute grappled with maintaining its non-profit status; the Internal Revenue Service challenged its "charitable" status which made it tax exempt
- That would seem to imply that yes, it is, despite my paltry knowledge of the tax code. ~ Amory (user • talk • contribs) 01:11, 11 August 2009 (UTC)
- No, it counts as a Medical Research Organization, which is IRS code section 170(b).[14] Red Act (talk) 01:20, 11 August 2009 (UTC)
Northern Canada, Anchorage and southern Greenland
Do Northern Canada and Anchorage, Alaska get up to 70s F in summer highs ? Well it is up in the 60 degrees away from equators. Is is possible southern Greenland can get up to 50s F in summer highs?--69.229.108.245 (talk) 02:07, 11 August 2009 (UTC)
- Anchorage can get to the 80s: [15] 75.41.110.200 (talk) 03:00, 11 August 2009 (UTC)
- Wow, that's amazing Anchorage have hit 80 F. Thanks 75.41.110.200--69.229.108.245 (talk) 03:02, 11 August 2009 (UTC)
- As you can see at our article on Anchorage, Alaska, the average summer high is above 60 degrees Fahrenheit, and the record high is 93F, so it seems likely that the temperature often reaches 70F or higher. As for Greenland, Narsarsuaq routinely gets above 60F, see here.-RunningOnBrains(talk) 03:41, 11 August 2009 (UTC)
Remember that while the summer daylight in these places is less intense than nearer the equator (because the sun is lower in the sky), there are also a lot more hours of sunlight each day in the summer (up to 24 hours a day when you get beyond the Arctic Circle), which partially offsets the weakness of it. "Summer" in climatic terms tends to be short in the arctic, limiting the kinds of plants than can grow there (for instance), but it certainly exists. --Anonymous, 04:16 UTC, August 11, 2009.
- Even today, in August, Accuweather is forecasting 69°F for Anchorage. A bit chillier in Nuuk, though! Tonywalton Talk 11:45, 11 August 2009 (UTC)
- Much of the populated parts of Alaska are known for warm, muggy summers. Remember that tundra is basically seasonally frozen swampland; so much of the southern parts of Alaska become quite humid and muggy in the (albeit short) summer months. Many people are surprised, for example, of the massive mosquito problem that Alaska has; or that cities like Juneau and Sitka occasionally get days over 100 deg F. As noted, even Anchorage gets a day or two in the 80s or 90s. Continental Canada has a likely much different climate, as the tempering effects of the ocean don't reach places like Yellowknife or Dawson. --Jayron32 04:54, 12 August 2009 (UTC)
- According to http://www.weather.com/outlook/travel/businesstraveler/wxclimatology/monthly/graph/USAK0116?from=36hr_bottomnav_business Record high for Juneau is 90F. Sitka is 87F. Warmer then you might expect, but certainly not over 100F. Don't forget the impact of a maritime climate for a lot of the cities on the south coast of Alaska. Also, south Alaska is NOT tundra. Googlemeister (talk) 13:30, 12 August 2009 (UTC)
- Much of the populated parts of Alaska are known for warm, muggy summers. Remember that tundra is basically seasonally frozen swampland; so much of the southern parts of Alaska become quite humid and muggy in the (albeit short) summer months. Many people are surprised, for example, of the massive mosquito problem that Alaska has; or that cities like Juneau and Sitka occasionally get days over 100 deg F. As noted, even Anchorage gets a day or two in the 80s or 90s. Continental Canada has a likely much different climate, as the tempering effects of the ocean don't reach places like Yellowknife or Dawson. --Jayron32 04:54, 12 August 2009 (UTC)
Conversions
I saw this information on YouTube. Before the explosion in the engine room aboard the SS Norway, 60,000 liters of water heated up to 500 degrees Celcius in a matter of seconds. How many gallons of water is 60,000 liters? How many degrees Fahrenheit is 500 degrees Celcuis69.203.157.50 (talk) 03:05, 11 August 2009 (UTC)
- Google is great for these kind of questions, here's the first http://www.google.com.au/search?hl=en&q=60000+l+in+gallons+&meta=&aq=f&oq= i'll let you work out how to do the temperature your self :). Vespine (talk) 03:17, 11 August 2009 (UTC)
- Well, the question is what kind of gallons you mean. Note that even though Vespine's link is to the Australian version of Google, it gave a result in US gallons. (At least, it did for me, trying it from Canada.) If you want Imperial gallons, you have to ask for them explicitly. --Anonymous, 04:21 UTC, August 11, 2009.
- 500C = 932F. (Double the C, decrease by 10%, add 32. You can do it in your head, right?) What supposedly caused this temperature increase? What was the starting temp? Where did the energy come from? How many Joules does it represent? Sounds dubious. Was it this incident? [16] A boiler rupturing and flashing to steam should not cause a temperature rise, and energy does not come to a boiler from nowhere. It normally took over 3 hours to go from cold to full pressure. Edison (talk) 04:39, 11 August 2009 (UTC)
- Just for the numbers, i have 125Gj to get that amount of water to 500 degrees, from 0. 30 tons of TNT. I'm bad at numbers tho so that could be way off.. However, i think they've just misreported it, i don't think the water would heated up to that high in a few seconds, i think the explosion and consequent vaporisation of the water took a few seconds. The tempereature was probably right up there just before the explosion. I'd be looking for a failure in the cooling system as the cause. But no doubt on a ship like this, multiple systems must have failed for this kind of accident to occur. warning sytstems, shut down systems etc... Vespine (talk) 05:09, 11 August 2009 (UTC)
- The very informative NTSB accident report says "About 0637, a boiler ruptured in the aft boiler room ... The boiler contained about 20 tons of water operating at a temperature of about 528º F under a pressure of about 60 bar (870 pounds per square inch [psi])). In the normal atmospheric pressure of the aft boiler room (14.7 psi), the pressurized hot water rapidly expanded in volume about 1,260 times into steam. The expanding steam, mixed with smoke, soot, and debris, swept through the engineering spaces, fatally injuring four engineering crewmembers who were on watch or on duty in or near the boiler room, as well as four other crewmembers who were in the crew living spaces on the starboard side of the Caribbean deck, next to the boiler room". Chronology of the incident says:
- "0637 - Rupture occurs in boiler No. 23 in aft boiler room. Rupture activates sprinkler system in areas around boiler room as well as smoke alarms locally in affected areas and remotely in wheelhouse. Pier-side Miami-Dade police officer radios report of accident to his command.
- 0638 - Boiler automation system shuts down operating main boilers, which stops steam turbine generators and causes loss of main electrical power. Ship’s battery-operated emergency systems activate and function as designed."
- Further on, the report says "Tests of the four safety valves on boiler No. 23 revealed no significant defects, indicating that they probably functioned properly at the time of the accident". The report concludes that "the probable cause of the boiler rupture on the Norway was the deficient boiler operation, maintenance, and inspection practices of Norwegian Cruise Line, which allowed material deterioration and fatigue cracking to weaken the boiler". So sounds like the boiler failed during normal operations and the steam came from the superheated water that was already in the boiler, not from external water heated by an explosion. Gandalf61 (talk) 10:08, 11 August 2009 (UTC)
- Our article says "Her engines consisted of eight high-pressure, super-heating boilers delivering 65 kg per cc and 500 degrees Celsius, all weighing 8,000 tons". This isn't referring to the accident but if I understand this correctly that is the normal operating temperature. There's a possible source but it's offline. It also says "This move cut down fuel consumption to 250 tonnes per 24 hours. The remaining four boilers and engine room were made fully automated, and operated from either a central control station below decks, or from the bridge", it's not clear if this cut down the operating temperature as well. Nil Einne (talk) 11:31, 11 August 2009 (UTC)
- The very informative NTSB accident report says "About 0637, a boiler ruptured in the aft boiler room ... The boiler contained about 20 tons of water operating at a temperature of about 528º F under a pressure of about 60 bar (870 pounds per square inch [psi])). In the normal atmospheric pressure of the aft boiler room (14.7 psi), the pressurized hot water rapidly expanded in volume about 1,260 times into steam. The expanding steam, mixed with smoke, soot, and debris, swept through the engineering spaces, fatally injuring four engineering crewmembers who were on watch or on duty in or near the boiler room, as well as four other crewmembers who were in the crew living spaces on the starboard side of the Caribbean deck, next to the boiler room". Chronology of the incident says:
- By the late 19th century, safety practices in operating steam boilers included periodic internal inspections, to detect the beginning of cracks or failure of internal bracing, and periodic testing of indicator valves and safety pressure relief valves. Boilers and other pressure vessels had to undergo hydrostatic testing, in which it was pressurized way above operating pressure by being filled with water. That way if it burst during the test, there was little or no stored energy to cause the damage and casualties that happened here. If I were investigating, I would wnt to check those tests and inspections. If a boiler had passed a pressure test, and had functioning relief valves, why would it pop like a kernal of popcorn? What was the root cause per the investigation? Malfeasance or incompetence? Murphy's Law? Bad Luck? Shit Happens? If it was a design problem, were there other similar boilers which had to be modified or taken out of service? Also, reports above list both 500 C and 528F, which are far apart as I noted. Edison (talk) 15:49, 11 August 2009 (UTC)
- The safety board investigation cited above concluded "The National Transportation Safety Board determines that the probable cause of the boiler rupture on the Norway was the deficient boiler operation, maintenance, and inspection practices of Norwegian Cruise Line, which allowed material deterioration and fatigue cracking to weaken the boiler. Inadequate boiler surveys by Bureau Veritas contributed to the cause of the accident." Pressures and temps were normal when it failed. Cracks from fatigue and corrosion extended to .55 inches in a wall .935 inches thick. Internal inspection or hydraulic testing had not been done recently on the header which failed. Edison (talk) 16:35, 11 August 2009 (UTC)
name of soviet car
What is the name of the type of car in this picture? --67.173.155.191 (talk) 04:07, 11 August 2009 (UTC)
- Dunno. It sort of resembles a ZIL-117 but some differences are visible. Maybe another model in the same series. 70.90.174.101 (talk) 04:20, 11 August 2009 (UTC)
That would be a Gaz-14 Chaika. Here's a Youtube video that nicely shows the distinctive rear.--Rallette (talk) 10:50, 11 August 2009 (UTC)
Cheap DNA restriction enzymes
To help in finding cheap sites for restriction endonuclease analysis (REA), I'm trying to compose a list of cheap endonucleases for use with my molecular cloning program. I know that, for example, EcoRI and BamHI are examples of relatively cheap enzymes, and therefore preferable candidates for REA. Can someone help me to augment this list? --94.212.39.7 (talk) 07:26, 11 August 2009 (UTC)
- New England Biolabs's website has a pricelist Rockpocket 07:45, 11 August 2009 (UTC)
- It would be a lot of work to deduce the enzymes from that price list. I was hoping someone already had a list compiled or otherwise was familiar enough with the prices to be able to reel them from the top of their head. --94.212.39.7 (talk) 10:47, 11 August 2009 (UTC)
- Page down to page 7 of the price list. On the left column, starting with product number R0101 are the restriction enzymes. They continue until page 10, with product number R3642 - basically all product numbers starting with "R" are restriction enzyme, restriction methylases and related. A quick glance shows that NEB's pricing for restriction enzymes is relatively simple, with "small" sizes in the $50-70 range, and "large" sizes in the $225-275 range. Different enzymes have different amounts of enzyme in each size, though. Uncommon or hard to purify enzymes may only have 500 units in the small size, whereas commonly used enzymes which NEB expresses recombinantly have 10,000 units in the small size. The cheapest ones are the ones you've probably heard of: EcoRI, HindIII, BamHI, and PstI all come in 10,000 units in the small size. - If you're at all interested in restriction enzymes, it pays to spend time browsing NEB's website. They have a lot more information there than the standard "this is what we sell and this is how much it costs" info. - 128.104.112.100 (talk) 16:15, 11 August 2009 (UTC)
- It would be a lot of work to deduce the enzymes from that price list. I was hoping someone already had a list compiled or otherwise was familiar enough with the prices to be able to reel them from the top of their head. --94.212.39.7 (talk) 10:47, 11 August 2009 (UTC)
Sorry, I didn't fully understand what you wanted. NEB and other companies generally price their enzymes at roughly the same price, what they vary is how many enzyme units you get for that standard price. Therefore the amount you plan use use is a factor in value for money. 128.104.112.100 is correct, though, in that most of the restriction enzymes are grouped together on that list, so it should be easy to scan down and find the best value for your application. In general, I seem to remember BamHI, EcoRI and XhoI are very inexpensive. Rockpocket 16:57, 11 August 2009 (UTC)
Battle excavations
Is it posssible to detect and excavate for example the shields, bones and other artifacts of Greek warriors at the site of Thermopylae? Also, is there a good source on battlefield excavations? 217.25.31.169 (talk) 09:13, 11 August 2009 (UTC)
- Use "find" for "archaelogy" in Battle of Thermopylae for more details, arrowheads etc have been found there. Don't know about shields - I would suspect any are long gone.
- Note that you personally cannot do this (ie start digging)- you'll get arrested by angry greeks ! - amateur archaelogy is illegal in all countries.83.100.250.79 (talk) 13:03, 11 August 2009 (UTC)
- (it might be an idea to move your question to the humanities desk)83.100.250.79 (talk) 13:38, 11 August 2009 (UTC)
- Amateur archaeology is not "illegal in all countries". Tempshill (talk) 16:10, 11 August 2009 (UTC)
- Where did that idea even come from? There are probably regulations on where digging is allowed, but anyone can do archaeology, amateur- or professional. In most places, even digging is okay. In places where archaeological artifacts are known to exist, a lot of regulations probably exist, but "illegal all countries"? Really? [citation needed]. Nimur (talk) 19:20, 11 August 2009 (UTC)
- If I remember The Mildenhall Treasure correctly, in the UK, any treasure found that is gold or silver must be reported to the authorities, and the Crown has the authority to confiscate it. Failure to report it is a crime. But conducting amateur archaeology to look for such treasure (or any other artifact) is not illegal in the UK, as far as I know. Tempshill (talk) 22:47, 11 August 2009 (UTC)
- It is more complicated than that. There is a big difference between property intentionally hidden in the ground and property simply lost. That means a random coin found when ploughing a field falls under different laws than a stash of coins found in a grave. I can't remember the details of those laws, I would have to look them up. I think gold (and maybe silver) has different laws to other things found as well. It is all extremely complicated in the UK (other countries probably have simpler laws, I would be amazed if they have more complicated ones!). --Tango (talk) 04:15, 12 August 2009 (UTC)
- We have a fantastic article on the subject: Lost, mislaid, and abandoned property. There may be some statutes that alter the common law, but I think the basic principles are the same as they always were. --Tango (talk) 04:23, 12 August 2009 (UTC)
- It is more complicated than that. There is a big difference between property intentionally hidden in the ground and property simply lost. That means a random coin found when ploughing a field falls under different laws than a stash of coins found in a grave. I can't remember the details of those laws, I would have to look them up. I think gold (and maybe silver) has different laws to other things found as well. It is all extremely complicated in the UK (other countries probably have simpler laws, I would be amazed if they have more complicated ones!). --Tango (talk) 04:15, 12 August 2009 (UTC)
- If I remember The Mildenhall Treasure correctly, in the UK, any treasure found that is gold or silver must be reported to the authorities, and the Crown has the authority to confiscate it. Failure to report it is a crime. But conducting amateur archaeology to look for such treasure (or any other artifact) is not illegal in the UK, as far as I know. Tempshill (talk) 22:47, 11 August 2009 (UTC)
- Where did that idea even come from? There are probably regulations on where digging is allowed, but anyone can do archaeology, amateur- or professional. In most places, even digging is okay. In places where archaeological artifacts are known to exist, a lot of regulations probably exist, but "illegal all countries"? Really? [citation needed]. Nimur (talk) 19:20, 11 August 2009 (UTC)
- As long as you have the permission of the landowner, I can't see there being any problems. If you find human remains there are usually procedures to go through and there may be complicated rules about who owns whatever you find, but you amateur archaeology isn't illegal in any country as far as I know. There are archaeology societies made up of amateurs set up all over the place. --Tango (talk) 21:35, 11 August 2009 (UTC)
- My wife's grandfather was an amateur archaeologist, and he had literally THOUSANDS of carefully cateloged Native American arrowheads. There are parts of the midwest where all you'd need to find one is a garden rake; they are quite literally littered all over the place. As far as I know, as long as there are no regulations, such as removing artifacts from a national park, and you have the property owners permission, there's little problem with this sort of amateur archaeology. Now, there may be pragmatic probelms, as noted above, with tripping over say a large gravesite or large cache of valuables, but for little things like arrowheads and potsherds and the like, I'm pretty sure its unregulated. --Jayron32 04:49, 12 August 2009 (UTC)
- Right, I just would not go out to a famous historical battlefield and look without permission from whoever is responsible for managing it though. The rules might vary in different legal jurisdictions. Googlemeister (talk) 13:25, 12 August 2009 (UTC)
- My wife's grandfather was an amateur archaeologist, and he had literally THOUSANDS of carefully cateloged Native American arrowheads. There are parts of the midwest where all you'd need to find one is a garden rake; they are quite literally littered all over the place. As far as I know, as long as there are no regulations, such as removing artifacts from a national park, and you have the property owners permission, there's little problem with this sort of amateur archaeology. Now, there may be pragmatic probelms, as noted above, with tripping over say a large gravesite or large cache of valuables, but for little things like arrowheads and potsherds and the like, I'm pretty sure its unregulated. --Jayron32 04:49, 12 August 2009 (UTC)
- Amateur archaeology is not "illegal in all countries". Tempshill (talk) 16:10, 11 August 2009 (UTC)
European Maple Syrup
Are any of the species of maple tree native to Europe usable for making syrup? --Carnildo's non-admin account (talk) 09:46, 11 August 2009 (UTC)
- I think the issue is not the species of tree but the climate. I think Maple syrup is incredibly bitter without the right weather (long cold plus correct timing). I suspect you would have to be somewhere well East in Europe to have a chance --BozMo talk 13:14, 11 August 2009 (UTC)
- Sugar maples originated in North America. In Europe I have seen some in gardens, parks and even alleys, but I am not aware of any agricultural usage of the tree. Googling indicates that the European climate is unsuitable to produce any significant yield of syrup, as this requires freezing nights and warmish days for prolonged periods. Molasses from other sources (sugar beet) were / are used in Europe. --Cookatoo.ergo.ZooM (talk) 14:52, 11 August 2009 (UTC)
- So, it appears that extreme cold is bad for sugar maples. How about warm weather? I'm currently in the Ozarks (Missouri) and there is a lot of sugar maples. A road nearby is called "Sugar Tree Hill" because the sugar maples there are supposedly extra sweet. It rarely freezes at night here - just a few weeks in February. So, I wonder if there are warmer weather sugar maples and colder weather sugar maples (or if the sugar maples here aren't sugar maples at all). -- kainaw™ 15:07, 11 August 2009 (UTC)
- Sugar maples can grow in a lot of different places. The suitability of the sap for making syrup is based both on the tree species, and on the climate. I see no reason why maple species native to Europe could not produce good syrup if grown in the right conditions, or that a sugar maple grown in improper conditions would not give good syrup. In fact, you can make syrup from birch trees. Googlemeister (talk) 15:15, 11 August 2009 (UTC)
- This site describes the European field maple, and indicates that the sap contains sugar, and can be drunk or turned into syrup, but that the sugar content is far below that of the North American sugar maple. As far as climate/weather goes, take a look at this site, but basically, it needs to get warm enough for the sap to flow well during the day, and cold enough (below freezing) to allow the tree to recover at night. Sugaring season ends when the leaves start budding because of chemical changes in the sap related to bud/leaf production which give the syrup an off taste. Some jerk on the Internet (talk) 18:48, 11 August 2009 (UTC)
- So, it appears that extreme cold is bad for sugar maples. How about warm weather? I'm currently in the Ozarks (Missouri) and there is a lot of sugar maples. A road nearby is called "Sugar Tree Hill" because the sugar maples there are supposedly extra sweet. It rarely freezes at night here - just a few weeks in February. So, I wonder if there are warmer weather sugar maples and colder weather sugar maples (or if the sugar maples here aren't sugar maples at all). -- kainaw™ 15:07, 11 August 2009 (UTC)
Relativistic Doppler effect-another problem
Relativistic Doppler effect#Motion in an arbitrary direction has relativistic abberatition formula
I just calculated putting . Then
- .
Because c>|v|, the numerator is always positive, so the denominator decides the sign of .
And because |x|>1, and c>|v|, |cx|>|v|, and the sign of x decides the sign of .
If x is positive, is positive, and if x is negative, is negative, and vice versa.
Taking |x| as large as possible, comes near 0, that is, comes near , and still the sign of is the same as .
Looking at Relativistic Doppler effect#Visualization, the direction at comes forward.
Hmmm...Like sushi (talk) 11:04, 11 August 2009 (UTC)
Sorry, I found a mistake in calculation.
Like sushi (talk) 11:39, 11 August 2009 (UTC)
Why is AIDS so Common in Africa?
I was taught that AIDS was spread through gay sex. But the infection rate--last time I checked--was ⅓ in some countries in Africa. It's hard to understand how a disease that isn't airborne could infect that many people.--IndexOutOfBounds (talk) 15:01, 11 August 2009 (UTC)
- AIDS may be spread by any unprotected sex (gay, straight, bi, tri...). It is rampant in underdeveloped countries due to a lack of education and prevention. -- kainaw™ 15:03, 11 August 2009 (UTC)
- A guy can give a girl AIDS, but not the other way around, right? At least, it'd have to involve untraditional sex for that to happen, right?--IndexOutOfBounds (talk) 15:04, 11 August 2009 (UTC)
- Wow, have you been poorly served by your public health service. Girls can give guys HIV with regular, traditional sex. Both penetrative and receptive partners can transmit and receive HIV. Here's an overview of HIV transmission. Statistically, it is less likely to occur, but it can, and does occur. Keep in mind that there are non-sexual ways to transmit it as well; mother-to-child is a very common mode of transmission in Africa in particular. --98.217.14.211 (talk) 15:08, 11 August 2009 (UTC)
- I graduated from high school in 2000 and last learned about HIV/AIDS in 1998. So, no, I don't remember everything they told us about AIDS back then, and even if they went into details such as these.--IndexOutOfBounds (talk) 15:15, 11 August 2009 (UTC)
- It's kind of a big deal, you know, how to avoid getting various diseases. I'm just saying. And it's pretty easy to look up this information. You might as well be posting on here about whether the Earth is flat or not, and then complaining that you went to school a long time ago and can't be bothering to remember such a thing. To think that AIDs is "only spread by gay sex" is an extremely, extremely ignorant thing to believe still. If that's really what you were taught in 2000 (which is not what I was taught in the 1990s), then you were, as I said, seriously poorly served by whomever taught you about public health, STDs, etc. --98.217.14.211 (talk) 16:13, 11 August 2009 (UTC)
- Just so you know, this is a reference desk where you can ask questions. I'm not a doctor. I have few college degrees, but none of them are in biology or medicine. So, to call me ignorant is (ironically) ignorant.--IndexOutOfBounds (talk) 23:45, 11 August 2009 (UTC)
- It's not, though. This is considered to be high-school knowledge in the USA. It's basic public health. It's about one step above knowing about how condoms work. Anyway, your question has been answered, many times over. My quibble isn't with you, just that you've been so poorly, poorly served by your secondary school education. (If you had graduated from high school in the 1970s, that would be one thing. But 2000? Come on.) The idea that you've somehow managed to get college education and be so ignorant about this basic, world-relevant, individually-relevant health fact is even more disconcerting, in a way. My degrees are not in biology, either, but one learns just a certain amount by simply paying attention to the world around you. The fact that AIDS is not spread only by homosexuals has been a major public health message since the 1980s. --98.217.14.211 (talk) 02:40, 12 August 2009 (UTC)
- At least IndexOutOfBounds can admit what he doesn't know. What are you trying to make up for by pretending that you know everything?Ksngdfhg (talk) 03:11, 12 August 2009 (UTC)
- I think there is a troll with a sockpuppet in the house. But IndexOutOfBounds is entertaining and I would like to hear where he claims to be from. And if "IndexOutOfBounds" is busy I wouldn't mind hearing where Ksngdfhg is from.--OMCV (talk) 03:37, 12 August 2009 (UTC)
- I really feel sorry for your kids, guys. You people can't even answer a simple question without calling someone ignorant? IndexOutOfBounds may have been ignorant about AIDS, but at least he's not stupid. I'm afraid there are no articles on Wikipedia that cover how to answer a simple question. I guess there's nothing that can be said to help you.Ksngdfhg (talk) 03:44, 12 August 2009 (UTC)
- Well, look at it like this. User:Ksngdfhg's "User contributions" consists entirely of two posts to this thread - and nothing else. How likely is it that a brand new user arrives at Wikipedia, types in a random string on the home-keys of his/her keyboard as a user ID (possibly the least memorable one imaginable) and heads straight over to the Science ref-desk to stridently support IndexOutOfBounds and does NOTHING else on Wikipedia. Are you surprised that people accuse this account of being a sock-puppet? I don't know for sure because I don't have 'check-user' priviliges - but I'd bet good money on it - and so I remind IndexOutOfBounds/Ksngdfhg that sock puppeteering for these kinds of reasons is a serious offense around here...it could easily get you blocked from the site if it becomes a habit. SteveBaker (talk) 12:01, 12 August 2009 (UTC)
- I really feel sorry for your kids, guys. You people can't even answer a simple question without calling someone ignorant? IndexOutOfBounds may have been ignorant about AIDS, but at least he's not stupid. I'm afraid there are no articles on Wikipedia that cover how to answer a simple question. I guess there's nothing that can be said to help you.Ksngdfhg (talk) 03:44, 12 August 2009 (UTC)
- I think there is a troll with a sockpuppet in the house. But IndexOutOfBounds is entertaining and I would like to hear where he claims to be from. And if "IndexOutOfBounds" is busy I wouldn't mind hearing where Ksngdfhg is from.--OMCV (talk) 03:37, 12 August 2009 (UTC)
- At least IndexOutOfBounds can admit what he doesn't know. What are you trying to make up for by pretending that you know everything?Ksngdfhg (talk) 03:11, 12 August 2009 (UTC)
- It's not, though. This is considered to be high-school knowledge in the USA. It's basic public health. It's about one step above knowing about how condoms work. Anyway, your question has been answered, many times over. My quibble isn't with you, just that you've been so poorly, poorly served by your secondary school education. (If you had graduated from high school in the 1970s, that would be one thing. But 2000? Come on.) The idea that you've somehow managed to get college education and be so ignorant about this basic, world-relevant, individually-relevant health fact is even more disconcerting, in a way. My degrees are not in biology, either, but one learns just a certain amount by simply paying attention to the world around you. The fact that AIDS is not spread only by homosexuals has been a major public health message since the 1980s. --98.217.14.211 (talk) 02:40, 12 August 2009 (UTC)
- Just so you know, this is a reference desk where you can ask questions. I'm not a doctor. I have few college degrees, but none of them are in biology or medicine. So, to call me ignorant is (ironically) ignorant.--IndexOutOfBounds (talk) 23:45, 11 August 2009 (UTC)
- It's kind of a big deal, you know, how to avoid getting various diseases. I'm just saying. And it's pretty easy to look up this information. You might as well be posting on here about whether the Earth is flat or not, and then complaining that you went to school a long time ago and can't be bothering to remember such a thing. To think that AIDs is "only spread by gay sex" is an extremely, extremely ignorant thing to believe still. If that's really what you were taught in 2000 (which is not what I was taught in the 1990s), then you were, as I said, seriously poorly served by whomever taught you about public health, STDs, etc. --98.217.14.211 (talk) 16:13, 11 August 2009 (UTC)
- I graduated from high school in 2000 and last learned about HIV/AIDS in 1998. So, no, I don't remember everything they told us about AIDS back then, and even if they went into details such as these.--IndexOutOfBounds (talk) 15:15, 11 August 2009 (UTC)
- Are you currently in Africa? I thought we spent enough time and money in America and Europe to stamp out such ignorance. -- kainaw™ 15:10, 11 August 2009 (UTC)
- Wow. You're a really big troll. I don't think the reference desk is for you. After having to read your comments, I don't think it's for me, either.--IndexOutOfBounds (talk) 15:15, 11 August 2009 (UTC)
- Are you currently in Africa? I thought we spent enough time and money in America and Europe to stamp out such ignorance. -- kainaw™ 15:10, 11 August 2009 (UTC)
- Also note there is more information in the transmission section of the article on HIV. --130.216.1.16 (talk) 15:10, 11 August 2009 (UTC)
- You have kind of answered your own initial education. Poor education and ignorance (sometimes willfull) of the facts are a major factor in transmission. See Jacob Zuma and his infamous "shower cure". Fribbler (talk) 15:12, 11 August 2009 (UTC)[
- As well as Fribbler's comment, HIV conspiracy theories and AIDS denialism have also taken hold in parts of Africa. When political leaders such as Thabo Mbeki and Manto Tshabalala-Msimang are spreading misinformation about how HIV is spread, it's difficult to get the message about safer sex across. AlmostReadytoFly (talk) 15:21, 11 August 2009 (UTC)
- You have kind of answered your own initial education. Poor education and ignorance (sometimes willfull) of the facts are a major factor in transmission. See Jacob Zuma and his infamous "shower cure". Fribbler (talk) 15:12, 11 August 2009 (UTC)[
- According to the AIDS article, the primary mode of HIV infection worldwide is through sexual contact between a man and a woman. One possibility being researched as to why heterosexual transmission is more common in Africa than elsewhere is that schistosomiasis, which affects up to 50 per cent of women in parts of Africa, damages the lining of the vagina. Red Act (talk) 15:35, 11 August 2009 (UTC)
- I hope IndexOutOfBounds is not seriously offended by comments here. I can remember when doctors genuinely thought that AIDS was mainly transmitted through gay sex, but that was in the 1980s, and much has been discovered since then, and I would have thought that any educator would have updated their knowledge by 1998. Dbfirs 18:20, 11 August 2009 (UTC)
- Misinformation is a big part of it. One persistant myth amongst African men is that having sex with a virgin will cure you of AIDS. I leave it to your imagination as to (a) how such a crazy notion might spread faster than the "don't have sex" message - and (b) the devastating consequences of such dangerous claims. SteveBaker (talk) 18:33, 11 August 2009 (UTC)
- The Catholic prohibition of condoms is also a significant factor. --Tango (talk) 21:30, 11 August 2009 (UTC)
- And also the George Bush government funding AIDS awareness campaigns throughout Africa under the specific condition that abstainance be taught rather than condom use. That's such an incredibly irresponsible thing to mandate, it makes me want to scream! SteveBaker (talk) 23:33, 11 August 2009 (UTC)
- I am not aware of any sexually transmitted disease that is only spread by gay people, only spread by males, only spread by females, or in general only spread by any particular kind of person. Any person can transmit a sexually transmitted disease to any other person, and it may not even involve sex (mishandled medical equipment can also be a vector). Pathogens don't pay attention to what kind of person you are. What is correct is that there was a point at time in which AIDS was statistically more prevalent in the gay community than in the general population in the United States. I don't know whether this is still the case. Dcoetzee 23:26, 11 August 2009 (UTC)
- Life is a sexually transmitted disease (normally) only spread by hetero-sex. :-) Mitch Ames (talk) 11:26, 12 August 2009 (UTC)
- The most harrowing thing about the HIV->AIDS epidemic is how human ideologies fan the flames. Be it nationalistic: "This country can't have aids, for it is too great!", religious: "Abstinence is gods way. If you want to have sex, then don't...", or political: "AIDS would be bad for business, any chance of massaging the figures?". Nationalistic denials, abstinence programmes that kill millions in the name of "decency" and political manipulation of pandedemics exacerbate the AIDS problem more than prostitution, drugs, or, as some people believe, "teh geys". Education stops HIV. Proven fact. It's the best weapon we have, and we should use it! Fribbler (talk) 23:55, 11 August 2009 (UTC)
Electric field strength
Hi, this is a homework problem, but I'm not asking for the solution, I'd just like someone to point out where I've gone wrong please. The problem is:
Given two point charges of arbitrary same-signed charge q1 and q2, at locations x1 and x2, find the point x between them at which the electric field strength is equal to zero.
What I did was make x1 equal to zero, then made this equality:
Then I rearranged that to get:
Which is just a quadratic, so then you solve that. The trouble is, the way the problem is given, values for the charges and distances are given (these change every time, it's an online thing), and the answer you check it against is the numerical one for that particular set of values, and mine keeps coming up incorrect. For example, if I have
Then I get the values of the coefficients in the quadratic as
And when I solve that, I get 0.153 m, which I add to 0.25 to get a final answer of 40.3 cm. The given solution for this set of values, however, is x=43.2 cm. I've checked and double-checked my working; could someone help me? --130.216.1.16 (talk) 15:08, 11 August 2009 (UTC)
The x2 you use in your equation is the distance between the charges, not the position x2 from the assignment. —Preceding unsigned comment added by 81.11.170.162 (talk) 15:57, 11 August 2009 (UTC)
- No, although the symbol is used to mean two different values, the distinction is maintained mentally such that that isn’t a problem. The real problem is that there’s a sign error – the expression above should be
- I don't think so. Dauto (talk) 21:44, 11 August 2009 (UTC)
- The problem is that . Dauto (talk) 00:34, 12 August 2009 (UTC)
- Why not take the square root?
- Which is not only simpler than the quadratic but also avoids the secon (spurious) solution to the quadratic. Dauto (talk) 00:34, 12 August 2009 (UTC)
- Whoops, you’re right! The sign error I showed was my error. The actual problem was the sign on the , as you pointed out. Red Act (talk) 04:46, 12 August 2009 (UTC)
helicopter ejection seats
The Kamov Ka-50 was the first helicopter to be designed with a ejector seat, have there been any others with this feature? Googlemeister (talk) 15:10, 11 August 2009 (UTC)
- The Ka-52 two-seat variant also has the ejector system; I've found no reference to ejector seats in other helicopters. Rotary wing aircraft can already survive many unpowered landings via autorotation. — Lomn 15:53, 11 August 2009 (UTC)
- If it also rather difficult to eject from a helicopter since there are rotor blades above you! You have to get rid of them before you can eject, which makes for a much more complex system. They will only be fitted if it is really worth it, which it rarely is. --Tango (talk) 16:39, 11 August 2009 (UTC)
- What's wrong with ejecting downwards? Vimescarrot (talk) 17:58, 11 August 2009 (UTC)
- It prevents low-altitude ejections, and helicopters are typically in low-altitude environments. — Lomn 18:05, 11 August 2009 (UTC)
- What's wrong with ejecting downwards? Vimescarrot (talk) 17:58, 11 August 2009 (UTC)
- If it also rather difficult to eject from a helicopter since there are rotor blades above you! You have to get rid of them before you can eject, which makes for a much more complex system. They will only be fitted if it is really worth it, which it rarely is. --Tango (talk) 16:39, 11 August 2009 (UTC)
- They usually have explosive bolts to blow the rotors off...with the amount of centrifugal force, it doesn't take much for them to fly outwards at a truly spectacular speed! There have been experiments with ejecting through the floor of the helicopter also - but having large doors in places like that really messes up the structural rigidity of the thing. The US experimented with them on the Cobra - but I don't think that ever went into production. Part of the problem is that helicopters generally fly too close to the ground for a safe ejection. While there are ejection systems that can fling the seat high enough for the parachute to open - those seats have big rockets under them and are too heavy for helicopter operations...they are mostly only used for aircraft that do carrier deck landings. SteveBaker (talk) 18:30, 11 August 2009 (UTC)
- Thanks for the info! :) Vimescarrot (talk) 21:50, 11 August 2009 (UTC)
The Moon
![](http://upload.wikimedia.org/wikipedia/commons/5/5f/Pacman.gif)
I just read about the "Giant impact hypothesis" for the first time. Very interesting. But for that much material to have been blasted off the face of this planet, surely when the NASA guys took photos of earth, they'd have seen something that looked more like Pacman than a sphere? --Dweller (talk) 16:18, 11 August 2009 (UTC)
- The Earth’s solid crust is relatively very thin, below which there’s a liquid mantle. So an enormous hole like that would get filled in rather immediately. Red Act (talk) 16:31, 11 August 2009 (UTC)
- The mantle is a solid! See rheid. It's like cheese; it moves when you push on it, but it is not a liquid. Nor is the mantle a sea of magma. Dragons flight (talk) 23:30, 11 August 2009 (UTC)
- My boss told me he had heard there was one side of the earth with less dense material (visible on a "gravitation map" or whatever) which could be due to such an impact. I don't know if he was correct or not... TastyCakes (talk) 16:33, 11 August 2009 (UTC)
- See: Physical geodesy. --Tango (talk) 16:36, 11 August 2009 (UTC)
- I'd think that since Earth is geologically active, it would have erased any gravity anomalies long ago. Anything below the crust is fluid and in a state of constant motion (although said "motion" is slower than the speed that glass flows), so density variations would even out pretty quickly. The crust is constantly being created, subducted, and moved around by plate tectonics, so very few rocks remain from the time of the impact. --Bowlhover (talk) 22:01, 11 August 2009 (UTC)
- See also: History of the Earth for a brief note about how the Earth reacted to the collision. The theory is that it became completely molten - which would cause it to quickly become nearly spherical. -- kainaw™ 17:24, 11 August 2009 (UTC)
- Even without becoming molten, gravity will reshape a body like the Earth back into the near-spherical condition of hydrostatic equilibrium (the IAU's definition of a planet notes that a defining characteristic is sufficient gravity to overcome rigidity and reach hydrostatic equilibrium). — Lomn 18:07, 11 August 2009 (UTC)
- Indeed, but a molten planet will reshape quicker. --Tango (talk) 18:30, 11 August 2009 (UTC)
- Even without becoming molten, gravity will reshape a body like the Earth back into the near-spherical condition of hydrostatic equilibrium (the IAU's definition of a planet notes that a defining characteristic is sufficient gravity to overcome rigidity and reach hydrostatic equilibrium). — Lomn 18:07, 11 August 2009 (UTC)
- My boss told me he had heard there was one side of the earth with less dense material (visible on a "gravitation map" or whatever) which could be due to such an impact. I don't know if he was correct or not... TastyCakes (talk) 16:33, 11 August 2009 (UTC)
Large population increases rate of evolution?
In a book review, game designer and former physics teacher Chris Crawford cite two writers as showing mathematically that a larger population increases the rate of evolution, even if it doesn't make previously abundant resources scarce. Can anyone here confirm that the numbers work out, whether because they've read the book or because of another source that says the same thing? NeonMerlin 17:54, 11 August 2009 (UTC)
- It seems pretty obvious - in order to have evolution, you have to have some kind of pressure on the species such that not every individual can have offspring survive into the next generation - and you have to have some source of genetic variation. A larger population means that there are more mutations - more new genes appearing and more combinations of genes showing up. Assuming there is at least some level of breeding pressure, the increased number of mutations will obviously result in faster evolution. 18:21, 11 August 2009 (UTC)
- I would think it was more the opposite. Population bottlenecks can cause rapid evolution since any mutations in the few members of the population that survive will inevitably end up in a large proportion of the population. --Tango (talk) 18:29, 11 August 2009 (UTC)
- It's both. A larger population means there is likely to be a greater number (not necessarily percent) of genetic mutations occurring, so the potential is definitely there. However, in a small population, all it takes is one particularly persistent mutation to quickly affect the entire population. ~ Amory (user • talk • contribs) 19:18, 11 August 2009 (UTC)
- I guess we have to be more careful about what we're saying when we talk about increasing the "rate" of evolution. Certainly having a smaller population would result in a new, beneficial gene spreading more rapidly - but an awful long time could go by without any new, useful mutation showing up. With a large population, beneficial genes would show up much more frequently - although it would take longer for them to spread everywhere. But the degree to which that is the case has to depend on exactly HOW beneficial the gene was. A gene that made you immune to heart disease would spread through the population incredibly quickly - but a gene that helped you survive being struck by lightning could take forever to take hold in a larger population. When you consider the evolutionary advances due to two or more rare genes that are only beneficial in combination happening to meet as a result of sexual reproduction - the advantages of a large population should be even more significant. SteveBaker (talk) 23:28, 11 August 2009 (UTC)
- It's both. A larger population means there is likely to be a greater number (not necessarily percent) of genetic mutations occurring, so the potential is definitely there. However, in a small population, all it takes is one particularly persistent mutation to quickly affect the entire population. ~ Amory (user • talk • contribs) 19:18, 11 August 2009 (UTC)
- Right point, but wrong example. There is apparently such a mutation in a family from Italy, but it has little chance of being fixed any time soon. People typically die of heart attacks long after their reproductive age, so the selection pressure is fairly minimal. --Stephan Schulz (talk) 00:40, 12 August 2009 (UTC)
- But! if old people play a big enough part in raising and supporting the children of their family, their longevity could still play a part in selection pressure. This would be analogous to "drones" which alone can't breed or pass their genes on, but they play enough of a role in the "family" of the hive to explain how they evolved. Darwin thought this was important enough to devote a chapter in "Origins" to its study. Vespine (talk) 01:09, 12 August 2009 (UTC)
- Okay, but that selection pressure is going to be extremely weak. Old people aren't even remotely as crucial to the support of a human family as worker drones are to a colony of ants. Maelin (Talk | Contribs) 01:49, 12 August 2009 (UTC)
- But! if old people play a big enough part in raising and supporting the children of their family, their longevity could still play a part in selection pressure. This would be analogous to "drones" which alone can't breed or pass their genes on, but they play enough of a role in the "family" of the hive to explain how they evolved. Darwin thought this was important enough to devote a chapter in "Origins" to its study. Vespine (talk) 01:09, 12 August 2009 (UTC)
- Right point, but wrong example. There is apparently such a mutation in a family from Italy, but it has little chance of being fixed any time soon. People typically die of heart attacks long after their reproductive age, so the selection pressure is fairly minimal. --Stephan Schulz (talk) 00:40, 12 August 2009 (UTC)
- One more distinction between Neandertals and moderns deserves mention, one that could have enhanced modern survival in important ways. Research led by Rachel Caspari of Central Michigan University has shown that around 30,000 years ago, the number of modern humans who lived to be old enough to be grandparents began to skyrocket. Exactly what spurred this increase in longevity is uncertain, but the change had two key consequences. First, people had more reproductive years, thus increasing their fertility potential. Second, they had more time over which to acquire specialized knowledge and pass it on to the next generation—where to find drinking water in times of drought, for instance. “Long-term survivorship gives the potential for bigger social networks and greater knowledge stores,” Stringer comments. Among the shorter-lived Neandertals, in contrast, knowledge was more likely to disappear, he surmises.
- The above may be peculiar to human evolution, but it is still evolution. Bus stop (talk) 01:59, 12 August 2009 (UTC)
- Isn't "worker drone" a contradiction in terms? Workers are infertile females, drones are fertile males. Vespine meant "workers" not "drones". (Unless some social insects are very different to the honey bee, which is where my [limited] experience lies.) --Tango (talk) 04:09, 12 August 2009 (UTC)
- I think the opposite is observed more frequently... Take Darwin's finches, the large parent population on the mainland remains relatively unchanged for a long time. The small island populations on the islands are evolving like crazy. Yes the variable selection pressures have a lot to do with it, one year there is a drought so the seeds are hard and dry, the next year might be wet so there's more food around. But I think the large population does a lot more to "dilute" any evolution that takes place, they said that if any birds made it back to the mainlad, their genes would be diluted into the large population.. ring species is a very interesting topic, not exactly in response to this topic, but related. Vespine (talk) 23:54, 11 August 2009 (UTC)
- Yes, the main problem with large populations is that beneficial genes don't spread quickly at all—hence the old Galtonian problem of reversion to mediocrity. You don't get quick changes unless there is isolation, and so unless there are strong pressures you tend to get more of the same, on average. --98.217.14.211 (talk) 00:36, 12 August 2009 (UTC)
- The changes are no more quick when you have small populations, but the stresses are peculiar to that population, thus sending that population in its own direction. Isolation correlates with stresses peculiar to an isolated population, resulting in "peculiar" creatures. Bus stop (talk) 01:40, 12 August 2009 (UTC)
- I think our problem here is multiple uses of the term "changes". Why don't we say, "the spread of particular mutations." In a population that is very large, individual mutations will tend to have a very small net effect in the overall gene pool—they represent a very small percentage of the next generation's genes. In a small population, they will represent a sizable proportion of the next generation's genes. Over the course of a large number of generations, you'd see that particular mutation in a far higher percentage of the total population in a small group (assuming it is beneficial), than in a large one. I think most people would consider that to be a faster "rate of evolution" in a very colloquial sense, even though the total amount of gene exchange is identical. This is obviously a very crude approach to things. In the end, I think we're all getting caught up on the terminology like "rate of evolution," which is rather ambiguous. A large population will have a higher rate of mutation—that is clear—but the mutations themselves will not spread quickly unless there are very strong selective pressures. --98.217.14.211 (talk) 02:47, 12 August 2009 (UTC)
- "Faster" and "slower" evolution are subjective terms. Faster is not necessarily better than slower. Populations of the same creature that become isolated from one another will diverge from one another under forces of evolution if the challenges to reproduction and survival are different in their different ecological niches. Species evolve in order to preserve themselves (in an attempt to avoid extinction). Bus stop (talk) 03:07, 12 August 2009 (UTC)
- You can define the terms objectively in terms of change over time, to be sure. As for their "value" (good, bad, ugly), yes, that's subjective. --98.217.14.211 (talk) 15:17, 12 August 2009 (UTC)
- What are the advantages of "slower evolution" -- that is, of having beneficial mutations either arise less often or spread more slowly? NeonMerlin 16:41, 12 August 2009 (UTC)
- Advantages from what point of view? If we consider it advantageous that parrots be colorful and beautiful than we want evolution to go in that direction. But evolution has no agenda -- apart from survival and reproduction. I don't understand the question concerning slowness or rapidity in evolution. There may be material available on this. I am just ignorant of it. Bus stop (talk) 18:33, 12 August 2009 (UTC)
core not molten
When will Earth's core become solid and what would be the consequence for Earth? -- Taxa (talk) 18:39, 11 August 2009 (UTC)
- The inner core is solid, it's just the outer core that is molten. (The inner core is hotter, but under more pressure, so is solid despite the heat.) The Earth is slowly cooling, so I suppose it is possible that the outer core will freeze eventually. That would have a significant impact on the geomagnetic field, although I don't think it would eliminate the field entirely. I can't find a timescale for that, though - it might be longer than the life of the Sun, so would be moot. --Tango (talk) 18:56, 11 August 2009 (UTC)
- From what I understand, our knowledge of the thermal conduction properties of the inner earth are very limited. In fact, our best information on the deep earth comes from seismic analysis - which can give a good sound-speed and rock shear properties. This lets us estimate the rock composition in the mantle - but the error bars are non-trivial. We also have electromagnetic information, but it's not very conclusive as far as telling us material properties in the earth. So, from this amalgamation of data, we "guess" what sort of rock is down there, and under what conditions (pressure, temperature, etc). The next step is to estimate, or measure in a laboratory, the thermal conductivity properties of such a material - again, we don't have a great way of synthesizing molten silica or iron at the temperatures and pressures we expect to find in the deep mantle or outer core, so lab measurements are helpful only as far as data-extrapolation is reliable. Finally, the thermal conductivity problem can be solved analytically or numerically to estimate the time-constant of cooling. To my understanding, the Earth is almost in steady-state temperature, with solar energy incidence equally balanced by reradiation into space. But, with all these "Global Climate Change" scientists redefining what is meant by "Temperature of the Earth" (they usually mean the sea-level average temperature, or the average ocean temperature, or whatever - but they rarely mean the blackbody temperature or the radiation temperature as observed from space) - it's hard to be very sure whether Earth as a whole is "warming" or "cooling". On geological time scales, we can probably say that Earth is actually cooling, but very slowly; and by comparison to other Earth-like planets that we have measured (Mars, Mercury, and Moon -not really a planet, but who knows what terminology IAU will come out with next-- come to mind). All of these planets have cooled and appear to have solid interiors as evidenced by weak or absent dipole planetary magnetic fields; but our seismic experiments on the Moon were noisy and weak (so we aren't really sure). No seismic experiments have been conducted on Mars or Mercury (to my knowledge) so we have very limited understanding of the interiors of those planets. Each of those three seem to have cooled quicker than Earth - probably due to their smaller size (which means lower thermal mass, and also a greater surface-area to volume ratio). We can pretty much assume that Earth's interior will also solidify; I would estimate the timescales are on billions-of-years (which means that the steady-state approximation of solar heating will be invalid). Regarding the consequences - the biggest question is, "what will happen to our dipole magnetic field?" Mars seems to have greatly weakened and frozen some magnetism into the crustal rock; but Mercury and Moon have a neglible magnetic field. The dramatic consequences might include the disappearance of the Van Allen belts, exposing the atmosphere to the highest-energy solar wind particles; but this is speculation. It's worth noting that the most intelligent geomagnetism experts I have talked to about this always preface things by reminding me that we really have no idea why Earth has a magnetic field anyway - something about "hot iron" and maybe some kind of circular, convective motion ... but try to get a straight answer as to why this makes the planet look like a bar magnet - and you just get more questions. So - maybe a frozen interior will have no effect on our magnetic field... Nimur (talk) 19:32, 11 August 2009 (UTC)
- Given the long timescales involved, are we going to be rendered uninhabitable by the Sun before this happens? Vimescarrot (talk) 21:47, 11 August 2009 (UTC)
- The Sun will kill us in about a billion years, so if Nimur is correct and we're talking billions of years then yes, the Sun will kill us before the core cools down enough to be a serious problem (if it will ever be a serious problem). --Tango (talk) 22:59, 11 August 2009 (UTC)
- Given the long timescales involved, are we going to be rendered uninhabitable by the Sun before this happens? Vimescarrot (talk) 21:47, 11 August 2009 (UTC)
- From what I understand, our knowledge of the thermal conduction properties of the inner earth are very limited. In fact, our best information on the deep earth comes from seismic analysis - which can give a good sound-speed and rock shear properties. This lets us estimate the rock composition in the mantle - but the error bars are non-trivial. We also have electromagnetic information, but it's not very conclusive as far as telling us material properties in the earth. So, from this amalgamation of data, we "guess" what sort of rock is down there, and under what conditions (pressure, temperature, etc). The next step is to estimate, or measure in a laboratory, the thermal conductivity properties of such a material - again, we don't have a great way of synthesizing molten silica or iron at the temperatures and pressures we expect to find in the deep mantle or outer core, so lab measurements are helpful only as far as data-extrapolation is reliable. Finally, the thermal conductivity problem can be solved analytically or numerically to estimate the time-constant of cooling. To my understanding, the Earth is almost in steady-state temperature, with solar energy incidence equally balanced by reradiation into space. But, with all these "Global Climate Change" scientists redefining what is meant by "Temperature of the Earth" (they usually mean the sea-level average temperature, or the average ocean temperature, or whatever - but they rarely mean the blackbody temperature or the radiation temperature as observed from space) - it's hard to be very sure whether Earth as a whole is "warming" or "cooling". On geological time scales, we can probably say that Earth is actually cooling, but very slowly; and by comparison to other Earth-like planets that we have measured (Mars, Mercury, and Moon -not really a planet, but who knows what terminology IAU will come out with next-- come to mind). All of these planets have cooled and appear to have solid interiors as evidenced by weak or absent dipole planetary magnetic fields; but our seismic experiments on the Moon were noisy and weak (so we aren't really sure). No seismic experiments have been conducted on Mars or Mercury (to my knowledge) so we have very limited understanding of the interiors of those planets. Each of those three seem to have cooled quicker than Earth - probably due to their smaller size (which means lower thermal mass, and also a greater surface-area to volume ratio). We can pretty much assume that Earth's interior will also solidify; I would estimate the timescales are on billions-of-years (which means that the steady-state approximation of solar heating will be invalid). Regarding the consequences - the biggest question is, "what will happen to our dipole magnetic field?" Mars seems to have greatly weakened and frozen some magnetism into the crustal rock; but Mercury and Moon have a neglible magnetic field. The dramatic consequences might include the disappearance of the Van Allen belts, exposing the atmosphere to the highest-energy solar wind particles; but this is speculation. It's worth noting that the most intelligent geomagnetism experts I have talked to about this always preface things by reminding me that we really have no idea why Earth has a magnetic field anyway - something about "hot iron" and maybe some kind of circular, convective motion ... but try to get a straight answer as to why this makes the planet look like a bar magnet - and you just get more questions. So - maybe a frozen interior will have no effect on our magnetic field... Nimur (talk) 19:32, 11 August 2009 (UTC)
- The inner core started to solidify 3-4 billion years ago, and in that time ~15% of the total core has frozen. Given that time scale, the sun will almost certainly die before the core could solidify completely. Dragons flight (talk) 23:24, 11 August 2009 (UTC)
- Is it a linear thing? --Tango (talk) 23:41, 11 August 2009 (UTC)
- The inner core started to solidify 3-4 billion years ago, and in that time ~15% of the total core has frozen. Given that time scale, the sun will almost certainly die before the core could solidify completely. Dragons flight (talk) 23:24, 11 August 2009 (UTC)
- Everything is linear if you approximate enough. ;-) No, it's not entirely linear. However, heat flow through the Earth is roughly proportional to the temperature gradient and both the interior and exterior temperature are quasi-steady state, so energy loss is roughly constant (of order 10 TW for the core). Incidentally, the crystallization front between the inner and outer core is itself responsible for stabilizing the interior temperature, since the boundary must exist at the temperature where liquid and solid core material can coexist (i.e. a phase boundary). Dragons flight (talk) 23:50, 11 August 2009 (UTC)
- Everything differentiable is linear if you approximate enough, that being the definition of differentiability (a definition, anyway). I'll except that it is differentiable, though, but I suspect that over the billions of years you are talking about it may not be reasonable to approximate that much. It's not just residual heat involved, most of the heat comes from ongoing radioactivity that will be reducing over billions of years and may be concentrated more in certain layers, which will make the temperature gradient more complicated. The boundary isn't at constant temperature either, as it moves outwards it will decrease since the pressure is decreasing. These, and various other factors that I probably could never think of, mean it is probably far more complicated than a linear relationship. --Tango (talk) 04:01, 12 August 2009 (UTC)
- Everything is linear if you approximate enough. ;-) No, it's not entirely linear. However, heat flow through the Earth is roughly proportional to the temperature gradient and both the interior and exterior temperature are quasi-steady state, so energy loss is roughly constant (of order 10 TW for the core). Incidentally, the crystallization front between the inner and outer core is itself responsible for stabilizing the interior temperature, since the boundary must exist at the temperature where liquid and solid core material can coexist (i.e. a phase boundary). Dragons flight (talk) 23:50, 11 August 2009 (UTC)
- Tango, where are you getting 'about a billion years' from? The Sun article says it's about halfway along the main sequence and will enter the red giant phase in about another 5 billion years. Is something likely to happen before that that we need to worry about?AlmostReadytoFly (talk) 07:39, 12 August 2009 (UTC)
- In our Earth article, the 'future' section suggests that there may be less than a billion years before the effects of increased luminosity of the sun makes the planet uninhabitable. See also 'Sigurd (August 10, 2009). "On a cosmological timescale, The Earth's period of habitability is nearly over". Space Fellowship. Retrieved 2009-08-11.' (borrowed from a discussion on that article's talk page), which certainly gives food for thought. Mikenorton (talk) 08:14, 12 August 2009 (UTC)
- Nothing that some orbital mirrors wouldn't be able to fix for a few more billion years. Dauto (talk) 22:26, 12 August 2009 (UTC)
esterification of edible alcohols, besides ethanol
So I got some favourable correspondence from a chef, so I'm about to refine my series of experiments. The thing is, being 19, I don't really have good access to ethanol, and I'm tired of borrowing my roommates' beer. Which is a pity, since ethanol is probably an alcohol I could use in excess, and I wanted to try frying pan syntheses of ethyl cinnamate. What are some common food items that contain favourable OH groups for esterification? (And favourable COOH groups too?) Preferably these are compounds I could react in excess (for a noticeable ester smell?).
I was thinking of using tannins, since they are abundant. must I do to get tannin OH groups to react? (If I say, added tea leaves?) Why are aryl OH groups hard to esterify in general? Are there any pleasant tannin esters, anyway? Are there any cooking pan methods to turn compounds into reactive alcohols, e.g. turning spice oils?
Are sugar's OH groups conducive to esterification? What about sweeteners? What about caramelised sugars?
Could I also use enzymes or microbes to produce alcohols besides ethanol, e.g. convert an aldehyde into an alcohol? John Riemann Soong (talk) 19:11, 11 August 2009 (UTC)
- Depending on your area, possession of ethanol for chemistry is not regulated; you might be able to order it from a chemical supplier like Fisher Scientific: Molecular Biology-grade 100.0% ethanol is available for about 25 US dollars per 100 mL. Nimur (talk) 19:54, 11 August 2009 (UTC)
- (It should be noted - DO NOT DRINK 200 proof ethanol). Nimur (talk) 19:55, 11 August 2009 (UTC)
- Wow, 200 proof ethanol is really expensive ... couldn't I get it at azeotrope concentration? I imagine that would cheapen things considerably. Or is azeotrope-distilled alcohol (without a bittering agent?) regulated? John Riemann Soong (talk) 20:08, 11 August 2009 (UTC)
- There are numerous grades available; less pure ethanol may be cheaper. You can search for them or find other vendors. Of course, if you want to eat any of this stuff, be very careful - impurities in lab-chemistry-grade chemical supply can be extremely toxic - deadly. Even the 100.0% ethanol, which claims to be very pure, still might have as high as 100 ppm acetone, and other impurities ("probably below the LD50" isn't safe enough for human consumption). Nimur (talk) 20:12, 11 August 2009 (UTC)
- In many areas, you can buy 190 proof (95%, the azeotropic ratio) in liquor stores (some places regulate it as any other drinking alcohol, other places are stricter specifically about this one). I'll second Nimur's comment though, that lab-grade chemicals, while they may have a higher % purity than food-grade, may have than smaller amount of contaminant be a more dangerous chemical; food-grade is often lower purity but you know the impurities are safe to eat. Methyl alcohol (probably 70% or 90%, maybe also 100%) is often available from pharmacies. Isopropyl is also, but I don't know of any popular esters of it. DMacks (talk) 21:02, 11 August 2009 (UTC)
- There are numerous grades available; less pure ethanol may be cheaper. You can search for them or find other vendors. Of course, if you want to eat any of this stuff, be very careful - impurities in lab-chemistry-grade chemical supply can be extremely toxic - deadly. Even the 100.0% ethanol, which claims to be very pure, still might have as high as 100 ppm acetone, and other impurities ("probably below the LD50" isn't safe enough for human consumption). Nimur (talk) 20:12, 11 August 2009 (UTC)
- Even if you do, it isn't simple to get 200% proof - this 14-page document is a summary of the rules: [17]. You only need status, power of attorney, federal inspection, tracking systems to account for it down to no more than 1% loss, etc. 75.41.110.200 (talk) 21:29, 11 August 2009 (UTC)
- Depends on if you get denatured alcohol or not. As mentioned above, you can get "200 proof" denatured ethanol that has ppm levels of acetone/benzene/gasoline/etc. in it which renders it "unfit for human consumption" in the eyes of the government (and anyone who doesn't want to seriously destroy their liver). Denatured ethanol is relatively easy to come by - most hardware stores carry it in the paint department, where it is used as a cleaning solvent and finish component (for shellac and the like). Whether that would be suitable for chemistry experiments, I don't know. -- 128.104.112.100 (talk) 17:32, 12 August 2009 (UTC)
- Wow, 200 proof ethanol is really expensive ... couldn't I get it at azeotrope concentration? I imagine that would cheapen things considerably. Or is azeotrope-distilled alcohol (without a bittering agent?) regulated? John Riemann Soong (talk) 20:08, 11 August 2009 (UTC)
- Aryl OH is harder to esterificy than alkyl OH because of the lower nucleophilicity of Ar-OH - caused by delocalisation of the O lone pairs onto the benzene ring - the same effect causes the higher acidity of phenols compared to alcoholes (in general , for the same type of atom, higher acidity = lower nucleophilicity)
- You can get enzymes to do almost anything - both oxidations and reductions - however for a reduction you'll probably need a reducing agent to 'feed' the enzyme.
- I think tannin esters would be too involatile to have a smell. For taste see Tannin#Foods with tannins
- 83.100.250.79 (talk) 21:04, 11 August 2009 (UTC)
How do I get Ajax out of a can?
I called the company's number and they claim it can't be done. They just sent me a coupon for a new can.
However, I have three or four cans that have something left in them, but at some point even banging the can against a hard surface didn't work.
Yes, the company advised me don't keep it in a moist environment. I don't know where else to keep it. I use it in the bathroom; therefore, it goes in the bathroom. My father used to keep and use it in the kitchen (which the company doesn't advise either). I use Lysol there.
I have a can of Comet--a big one--that may soon be in the same situation. I tried Lysol toilet bowl cleaner but all those warnings scare me. Besides, Comet and Ajax are cheaper--if I can use the whole can.Vchimpanzee · talk · contributions · 19:24, 11 August 2009 (UTC)
- Can you cut the can? Tin snips ought to go through them (I think it's really just a stiff cardboard can, right?) Nimur (talk) 20:17, 11 August 2009 (UTC)
- That might work. Yes, it is cardboard. The oldest one is bent completely out of shape.
- I was thinking about Acupuncture needles or something. Thanks.Vchimpanzee · talk · contributions · 20:43, 11 August 2009 (UTC)
- What is the chemical formula of Ajax anyway? Might it be possible to gently heat the can in the oven to drive off the excess moisture (I've done that with salt when I lived in a damp flat) - or would the heat cause it to decompose and release noxious gases? --Kurt Shaped Box (talk) 13:38, 12 August 2009 (UTC)
- As an aside, it's probably not good that your bathrooms & kitchen are that humid - you're just asking for mold to grow there. If you have an extractor fan, you should probably turn it on more often than you currently do. SteveBaker (talk) 23:18, 11 August 2009 (UTC)
- I do have a fan. My father used to use it but I don't.
- The kitchen may not be that humid, but under the sink it would be.Vchimpanzee · talk · contributions · 14:26, 12 August 2009 (UTC)
- Why? There shouldn't be water UNDER the sink! You need to take this rather seriously - use the fans - and if something is damp that shouldn't be - find out why and get if fixed. When (not: "if") mold starts to grow in these moist environments, it will prove (a) smelly, (b) hazardous to your health and (c) hard to get rid of. SteveBaker (talk) 17:29, 12 August 2009 (UTC)
- I'll echo that. The place I lived in when I first left home (one room basement bedsit with no ventilation) caused my clothing to rot on the hanger if not taken out and hung in front of the electric fire every couple of weeks. Wet towels and bathmats would have mould growing on them within a couple of days. I was always getting chest infections too. The place was that damp that the air felt thick to breathe. Oh yeah, there were always silverfish and woodlice skittering everywhere too - after a while, I just learned to ignore them. --Kurt Shaped Box (talk) 21:39, 12 August 2009 (UTC)
- Apart from keeping your apartment drier you might want to use a zippy bag around your next can of Ajax. Put a bit of baking soda at the bottom of the bag to absorb any moisture that gets in. (Some grains of rice might also work for that.) Use a slider bag for easier access to your can. BTW if you live in a place with high air humidity you might have to consider getting a dehumidifier. For your existing cans I'd demolish them, use a tool to break up the lump. (No, I will not advise you to use a screwdriver like I would, because that's a good way to damage a perfectly good screwdriver ;-) Store the resulting powder in a container you can seal. Be sure to wear gloves, long sleeves and eye protection. 71.236.26.74 (talk) 07:07, 13 August 2009 (UTC)
- I'll echo that. The place I lived in when I first left home (one room basement bedsit with no ventilation) caused my clothing to rot on the hanger if not taken out and hung in front of the electric fire every couple of weeks. Wet towels and bathmats would have mould growing on them within a couple of days. I was always getting chest infections too. The place was that damp that the air felt thick to breathe. Oh yeah, there were always silverfish and woodlice skittering everywhere too - after a while, I just learned to ignore them. --Kurt Shaped Box (talk) 21:39, 12 August 2009 (UTC)
- Why? There shouldn't be water UNDER the sink! You need to take this rather seriously - use the fans - and if something is damp that shouldn't be - find out why and get if fixed. When (not: "if") mold starts to grow in these moist environments, it will prove (a) smelly, (b) hazardous to your health and (c) hard to get rid of. SteveBaker (talk) 17:29, 12 August 2009 (UTC)
- The kitchen may not be that humid, but under the sink it would be.Vchimpanzee · talk · contributions · 14:26, 12 August 2009 (UTC)
plant intelligence
What is the most intelligent plant in the world? -- Taxa (talk) 19:38, 11 August 2009 (UTC)
- Define "intelligent". Plants don't have a central nervous system, which is really a requirement for any common definition of intelligence that I know of. --Tango (talk) 19:43, 11 August 2009 (UTC)
- (ec) Define "intelligent". (Wow, Tango had exactly the same knee-jerk reaction as I did!) We really can't answer this question unless you have a specific idea about what intelligence means for an organism with no central nervous system. Maybe you would find tropism helpful - a lot of response to stimuli can occur without "thinking" - so there's sort of a biological Chinese room problem. Really sophisticated behavior might or might not be due to intelligence, depending how you want to define it. Nimur (talk) 19:47, 11 August 2009 (UTC)
- Response to stimuli. -- Taxa (talk) 20:44, 11 August 2009 (UTC)
- (ec) Define "intelligent". (Wow, Tango had exactly the same knee-jerk reaction as I did!) We really can't answer this question unless you have a specific idea about what intelligence means for an organism with no central nervous system. Maybe you would find tropism helpful - a lot of response to stimuli can occur without "thinking" - so there's sort of a biological Chinese room problem. Really sophisticated behavior might or might not be due to intelligence, depending how you want to define it. Nimur (talk) 19:47, 11 August 2009 (UTC)
- That's only one response to one stimuli in a millisecond time frame limit. What about sequences that occur over broader periods of time? -- Taxa (talk) 21:00, 11 August 2009 (UTC)
- Plants bend and twist to orient themselves to an available light source. Surely that qualifies as intelligence. See auxins. Bus stop (talk) 21:11, 11 August 2009 (UTC)
- (ec) Not what you're going to want to hear, but isn't, say, the growth of an oak tree over 50 years the result of a bunch of different stimuli? Roots grow around rocks in the ground, branches grow around any obstacles that exist, the acorns are produced at a certain time of the year, and it's all powered by photosynthesis which is 'stimulated' by sunlight. Tempshill (talk) 21:14, 11 August 2009 (UTC)
- You guys are overthinking it; the question is flawed. Vranak (talk) 21:45, 11 August 2009 (UTC)
- To the contrary. Put yourself in the place of a plant. You are in competition with other plants. You have to outwit the competition. If you are a conifer you decide to fill your photosynthesis devices with resin to conserve water so you can live near the arctic circle. You then send seeds aloft which take root and eventually dominate that part of the globe. You are much more intelligent than the plants which go there with no hope that they can survive. -- Taxa (talk) 03:34, 12 August 2009 (UTC)
- I believe a more thorough understanding of evolution and its pathways may inform and improve upon your understanding of putative 'plant intelligence'. Vranak (talk) 15:18, 12 August 2009 (UTC)
- An individual conifer doesn't make any decisions like that, the resin evolved over many generations. --Tango (talk) 03:45, 12 August 2009 (UTC)
- To the contrary. Put yourself in the place of a plant. You are in competition with other plants. You have to outwit the competition. If you are a conifer you decide to fill your photosynthesis devices with resin to conserve water so you can live near the arctic circle. You then send seeds aloft which take root and eventually dominate that part of the globe. You are much more intelligent than the plants which go there with no hope that they can survive. -- Taxa (talk) 03:34, 12 August 2009 (UTC)
- Overthinking! Refdeskers. Preposterous! ;-) Fribbler (talk) 23:30, 11 August 2009 (UTC)
- The brain cactus (Mammillaria elongata 'Cristata' ). --Heron (talk) 10:59, 12 August 2009 (UTC)
- In years past, the Y-12 Plant in Oak Ridge was crawling with Ph.D.s. --Sean 14:22, 12 August 2009 (UTC)
- For any reasonable definition of intelligence, (Like those you would find in an actual dictionary) there isn't an answer. No cognition is involved, quick and complex or otherwise. APL (talk) 19:30, 12 August 2009 (UTC)
Plants sleeping
Hello, I was wondering if someone could clear something up for me. It seems that most indoor plant growers have their lights on a timer. Is this to save electricity, or do plants do better if they have regular periods of darkness? Will plants that grow in perpetual light grow faster than ones with light and dark periods? Does this depend on the type of plant? TastyCakes (talk) 19:44, 11 August 2009 (UTC)
- It depends on the type of plant. Some plants undergo CAM photosynthesis, which means that certain chemical reactions prefer to take place at night (although a day cycle is needed to absorb the light for photosynthesis) - and the entire process is more efficient, even though only half of the reaction (day- or night- reaction) is happening at any given instant. Other plants can perform better if exposed to light for 24 hours/round-the-clock. Nimur (talk) 19:51, 11 August 2009 (UTC)
- Oh ok thanks a lot, do you know if there's anywhere I could get a list of plants that fall into each category? I'm mostly interested in things you can eat... TastyCakes (talk) 19:53, 11 August 2009 (UTC)
- Our article has a section and a list of common CAM plants; these include yucca, agave, many types of cacti (which may be edible), some Sagittaria tubers, and others. Nimur (talk) 20:00, 11 August 2009 (UTC)
- Hmm ok, so typical vegetables (lettuce, carrots, tomatoes etc) are more successful in constant light? TastyCakes (talk) 20:48, 11 August 2009 (UTC)
- Supposedly, in Alaska, despite the cool climate, the long summer daylight hours result in comically large vegetables like these. I don't know if this is true in general, but I have seen some very large pumpkins and cucumbers up there. Nimur (talk) 00:41, 12 August 2009 (UTC)
- Acutally plants do require set periods of day or night. See photoperiodism. Some plants are long day plants who require a set amount of sunlight (a minumum). Others are short day plants. One hormone that matters for plants is phytochrome. It is converted from one form to another in response to sunlight and the ratio is thought to effect photoperiodism. Not sure if this applies to all plants though. —Preceding unsigned comment added by 76.94.88.196 (talk) 08:55, 12 August 2009 (UTC)
- Note that photoperiodism is a a bit more complicated the hours of daylight. The older hypothesis is that it's the hours of darkness that really matter. If you give any plant long darkness but a burst of sufficiently bright light (particularly red light) for several minutes every 5 hours or so, you're likely to mimic long day conditions, so a short day plant will not flower. A phytochrome cycles between two forms, slowly converts back to one form (Pr) under darkness (or quickly under far red light) and quickly back to the other form (Pfr) under red light (or normal light). This is mentioned somewhat in photoperiodism and is sometimes called the hourglass model. However even that is a little too simplistic, [18] [19] gives an idea of some of the more recent research. BTW, some plants are day neutral Nil Einne (talk) 09:54, 12 August 2009 (UTC)
- Acutally plants do require set periods of day or night. See photoperiodism. Some plants are long day plants who require a set amount of sunlight (a minumum). Others are short day plants. One hormone that matters for plants is phytochrome. It is converted from one form to another in response to sunlight and the ratio is thought to effect photoperiodism. Not sure if this applies to all plants though. —Preceding unsigned comment added by 76.94.88.196 (talk) 08:55, 12 August 2009 (UTC)
- Supposedly, in Alaska, despite the cool climate, the long summer daylight hours result in comically large vegetables like these. I don't know if this is true in general, but I have seen some very large pumpkins and cucumbers up there. Nimur (talk) 00:41, 12 August 2009 (UTC)
- Hmm ok, so typical vegetables (lettuce, carrots, tomatoes etc) are more successful in constant light? TastyCakes (talk) 20:48, 11 August 2009 (UTC)
- Our article has a section and a list of common CAM plants; these include yucca, agave, many types of cacti (which may be edible), some Sagittaria tubers, and others. Nimur (talk) 20:00, 11 August 2009 (UTC)
- Oh ok thanks a lot, do you know if there's anywhere I could get a list of plants that fall into each category? I'm mostly interested in things you can eat... TastyCakes (talk) 19:53, 11 August 2009 (UTC)
Does this sound right to you?
"According to the USDADietary Guidelines, one serving of fruit is equal to one half cup. This measurement is based on fresh fruit cut in typical slices or chunks. Of course, by cutting the fruit into small bits like we do in Fruit2day, we can fit the equivalent of a full serving into a smaller space. That’s why even though a bottle of Fruit2day is only 6.75 fluid ounces, it still contains two complete servings of natural fruit goodness."[20] Imagine Reason (talk) 20:26, 11 August 2009 (UTC)
- It is certainly true that cutting something into smaller pieces usually allows you to fit it into a smaller space since you end up with less air around the pieces. Whether a bottle of Fruit2day really counts as two servings, I have no idea, but it is entirely possible. --Tango (talk) 20:40, 11 August 2009 (UTC)
- Could also be somewhat concentrated, having a higher nutrient to volume ratio then 1 cup of fresh fruit would. Googlemeister (talk) 20:46, 11 August 2009 (UTC)
- Or it may be older and some of the more volatile things might have decayed into less nutritious stuff. But the USDA guidelines are pretty fuzzy. It's never clear what they mean when they specify stuff like that by volume rather than weight. Also - which fruit? I'm pretty sure there are more nutrients in something dense like (say) a peach than in (say) a watermelon. The watermelon is almost all water - the peach has much less. Is a half-cup of watermelon enough? Is a half cup of peach more than you need? Given how fuzzy those terms are, I'd be very wary of company claims for being significantly more nutritionally dense than "real" fruit. SteveBaker (talk) 23:15, 11 August 2009 (UTC)
- Very true, the guidelines are kept intentionally simple, but that means they are of limited use. When you start trying to use them for something they weren't designed for, your results will be highly questionable. The guidelines are designed for fresh fruit, so using them for something like Fruit2day is problematic. --Tango (talk) 23:20, 11 August 2009 (UTC)
- Or it may be older and some of the more volatile things might have decayed into less nutritious stuff. But the USDA guidelines are pretty fuzzy. It's never clear what they mean when they specify stuff like that by volume rather than weight. Also - which fruit? I'm pretty sure there are more nutrients in something dense like (say) a peach than in (say) a watermelon. The watermelon is almost all water - the peach has much less. Is a half-cup of watermelon enough? Is a half cup of peach more than you need? Given how fuzzy those terms are, I'd be very wary of company claims for being significantly more nutritionally dense than "real" fruit. SteveBaker (talk) 23:15, 11 August 2009 (UTC)
- Could also be somewhat concentrated, having a higher nutrient to volume ratio then 1 cup of fresh fruit would. Googlemeister (talk) 20:46, 11 August 2009 (UTC)
- What's the question? "does this sound right?" No, your post sounds like spam to me. "Natural fruit goodness"? No one asking a question talks like this. Vespine (talk) 23:23, 11 August 2009 (UTC)
- That's a quote from the linked website, it's not the OP's own words. --Tango (talk) 23:42, 11 August 2009 (UTC)
- I'm not sure the servings can be manipulated as they say. I have had one such bottle and it looks like some bits of pineapple (I had the pineapple banana version). If a small apple is a serving, surely a half cup of it that is equivalent is not filled with air, but small bits of chopped apple? Imagine Reason (talk) 15:32, 12 August 2009 (UTC)
- There will be air inbetween all the pieces unless you mash the apples up really finely. --Tango (talk) 16:01, 12 August 2009 (UTC)
elemental isotopes
Is our current scientific understanding of isotopes of heavier atoms such that the % of each stable isotope of an element is even throughout the local part of the galaxy? What I mean is if we were to theoretically travel to a planet 100 ly away which had a surface of 100% water, could we expect to find 99.762% O16, the same as in the water on earth, or are those % dictated by the local star? Googlemeister (talk) 20:55, 11 August 2009 (UTC)
- The heavier elements are made inside stars - it seems likely that the isotope makeup could differ depending on the nature of the star that made those heavier atoms. In many cases, an odd-ball isotope of a stable atom will have come about through the decay of heavier, more unstable elements. Since the predominance of those must certainly depend on the history of the recent stellar neighbourhood - I'd guess it quite likely that there would be wide variation from place to place in the galaxy. SteveBaker (talk) 23:10, 11 August 2009 (UTC)
- 100ly away, maybe, it might be orbiting a star that formed from the same nebula as the Sun, so would have similar proportions. At greater distances, Steve's points mean I would expect significant variation. The stars that formed in the same area as the Sun will have spread out quite a bit by now, but their distance from the centre of the galaxy should be fairly similar. --Tango (talk) 23:18, 11 August 2009 (UTC)
The isotopic makeup of some gases is different between the atmospheres of Earth and Mars -- I assume the mechanism is that isotopes diffuse into space unequally and in a way that depends on the air pressure and gravity. This difference is one of the ways that it was confirmed that Mars meteorites on the Earth had in fact traveled from Mars. --Anonymous, 23:32 UTC, August 11, 2009.
- The isotopes behave very similarly, the only difference is mass and that difference is very small. It is more likely that the elements which decay into the different isotopes are behaving differently. For example, Uranium-238 is very heavy so given a chance it is likely to sink to the centre of a planet, but under some circumstances it will remain on the surface which will mean you end up with Lead-206. So, if those circumstances occur on one planet but not on another you'll end up with a higher proportion of Pb-206 compared to other isotopes on the first planet compared to the second. (I chose that example pretty much at random, it might be seriously flawed, but I think the general idea is sound.) --Tango (talk) 23:50, 11 August 2009 (UTC)
- Except we're talking about light elements found in atmospheric gases, which (except for helium) are formed only by fusion in stars, not by radioactive decay of heavy elements. --Anon, 04:36 UTC, August 12, 2009.
Broken stereo?
I have a stereo system hooked up to my TV, digital converter box, and DVD player. It is at least 15 years old. Yesterday, after we lost power during a thunderstorm (lightning struck pretty close and took out our cable too), the stereo stopped working. Whenever we turn it on, it looks like it works, but then after a second or two, it turns itself off suddenly. Is the thing history, or is this a pretty simple problem to solve? Thanks —Akrabbimtalk 21:49, 11 August 2009 (UTC)
- Probably history. Modern consumer electronics are pretty much disposable once the warranties have run out - the cost of repairing them is normally such that it's more cost effective to replace them with a brand new warrantied model. Also after fifteen years parts and service manuals may be difficult to come by. Before you look at repairing, check the price of replacing with an equivalent new unit - if a new one costs $200 and it will cost $100 to repair the fifteen year old one it's really not worth repairing. Exxolon (talk) 22:47, 11 August 2009 (UTC)
- It doesn't sound easy. Easy things are broken wires and blown fuses - but if it were either of those, it would probably be just completely dead. As a matter of course, I'd pull the lid off and see if there is anything obvious such as a blackened smudge around a particular component or a wire that looks singed. The odds are fairly remote that it'll be anything that obvious though. You might be able to trick it into working by playing with the controls during the second or two it does stay on...maybe if it has some kind of a setup menu, you could get to a "reset" entry or something and reset it before it craps out. All of these are very long shots though. In all likelyhood it has a fried memory chip or something. The computer inside powers up - checks the memory, finds that nothing makes sense and just shuts down again. SteveBaker (talk) 22:48, 11 August 2009 (UTC)
- I agree, it sounds dead. Turning on for a second or do and then turning itself off sounds like the firmware is fried. It is possible you can reset it somehow, but you will probably have to get a licensed repair firm to do it and they will charge more than a 15 year old stereo is worth. --Tango (talk) 23:04, 11 August 2009 (UTC)
- Well, if it were merely that the firmware was failing due to some garbage written into its non-volatile memory - then there is one (very bizarre) last-ditch method to try to fix it. Wrap the main unit (minus speakers, etc) in a plastic bag and leave it in your freezer overnight. (I told you it was bizarre!) The idea is that this takes the temperature of the electronics down to below their minimum operating temperature - which in some cases will erase the contents of their non-volatile storage. After a night in the freezer, bring the thing slowly back up to room temperature BEFORE you take it out of the plastic bag in order to prevent condensation onto the electronics. After it's been sitting out warming up for a couple of hours, plug it in and see if that did anything. I'd say that the odds of that working are much less than 1%...but if you're desperate - and the unit is going to become landfill anyway...then I suppose it's worth a try! (I've used this to erase a forgotten password from the BIOS ROM of an old laptop - and, amazingly, it worked perfectly. But in that case, I was able to freeze just the chip - not the entire laptop.) SteveBaker (talk) 11:44, 12 August 2009 (UTC)
- A possible but unlikely scenario is that the amp output has self resetting shjort circuit protection, like my old stereo. If one channel has a short in the speaker wire, the stereo will play for a second then shut off. Try with speaker wires disconnected (use headphones). That failing try Ebay for an equivalent 15 year old stereo. Or for a modern surround sound system. Edison (talk) 15:36, 12 August 2009 (UTC)
Herbicide
Is anyone aware of a weed killer that would prevent plant growth for a month or more? Someone vandalised my garden on the 4th July weekend, using some sort of spray, and even the weeds haven't started growing yet. The spray was applied quite locally: weeds have been growing between the lines of dead plants for a couple of weeks now. The only other thing that I know about it is that it kills what it contacts: some plants were only partially killed, such as a tomato that was mostly blackened but produced a ripe tomato just a week ago. 24.93.116.128 (talk) 21:50, 11 August 2009 (UTC)
- I don't know about herbicides, but when you mentioned the date, and then the blackened plant, I think of burning. Could there have been fireworks nearby, with someone's rocket coming down in your garden?? You don't say what evidence you used to know it was vandalized then, after all. Of course, I'm not sure if that would have an impact or not.Somebody or his brother (talk) 22:28, 11 August 2009 (UTC)
- You wouldn't get lines of dead plants from a rocket, would you? --Tango (talk) 23:06, 11 August 2009 (UTC)
- No, there was no evidence of a rocket (nothing found in the garden), and the plant is withered: it's black now because most of it died. There's an orangeish residue on the ground, as well. We think that the plants were sprayed perhaps on the 2nd July, but they appeared normal until suddenly withering on about the 6th. A rocket flying parallel to the ground isn't in question, because we have a fence that's higher than most of the plants in the garden, and its holes are fine enough that a rocket couldn't penetrate. Moreover, we had about a dozen lines of plants, so you'd need several rockets. BTW, the same thing happened to our rhubarb and part of a flowerbed perhaps 10m or more away. I should note that we talked to the local extension agent, who said that the effects sounded somewhat like Paraquat, but that was several weeks ago, before we knew that it would prevent weeds from growing for several weeks. That article says "It is rain-fast within minutes of application" and "It becomes biologically inactive upon contact with soil". Would something like this really be able to prevent weed growth weeks later? Soil tests, BTW, are out of the question due to cost. 24.93.116.128 (talk) 00:57, 12 August 2009 (UTC)
- If you think it is vandalism then the police might do the soil tests for you. --Tango (talk) 01:36, 12 August 2009 (UTC)
- A pity that your solution won't work; a day or two after the garden died, we (i.e. my family and I) notified the local police, and the opinion of the officer who came helped to solidify our idea that it was vandalism, but he said nothing about the police paying for it. They've been laying off policemen for budget reasons lately, so I'm sure that there's no money for soil tests. Thanks for the suggestion, though. 24.93.116.128 (talk) 02:34, 12 August 2009 (UTC)
- How about your insurance company? --Tango (talk) 03:44, 12 August 2009 (UTC)
- Seems... unlikely. The problem is the stakes are very low. It's hard to get anyone official interested if the crime is minor (though annoying) and the property loss is low (though very, very annoying). They aren't going to rate this higher than someone spray-painting the fence, even if, to a gardener, this sort of thing rates rather higher (and represents a lot of lost work). --98.217.14.211 (talk) 16:44, 12 August 2009 (UTC)
- How about your insurance company? --Tango (talk) 03:44, 12 August 2009 (UTC)
- A pity that your solution won't work; a day or two after the garden died, we (i.e. my family and I) notified the local police, and the opinion of the officer who came helped to solidify our idea that it was vandalism, but he said nothing about the police paying for it. They've been laying off policemen for budget reasons lately, so I'm sure that there's no money for soil tests. Thanks for the suggestion, though. 24.93.116.128 (talk) 02:34, 12 August 2009 (UTC)
- If you think it is vandalism then the police might do the soil tests for you. --Tango (talk) 01:36, 12 August 2009 (UTC)
- No, there was no evidence of a rocket (nothing found in the garden), and the plant is withered: it's black now because most of it died. There's an orangeish residue on the ground, as well. We think that the plants were sprayed perhaps on the 2nd July, but they appeared normal until suddenly withering on about the 6th. A rocket flying parallel to the ground isn't in question, because we have a fence that's higher than most of the plants in the garden, and its holes are fine enough that a rocket couldn't penetrate. Moreover, we had about a dozen lines of plants, so you'd need several rockets. BTW, the same thing happened to our rhubarb and part of a flowerbed perhaps 10m or more away. I should note that we talked to the local extension agent, who said that the effects sounded somewhat like Paraquat, but that was several weeks ago, before we knew that it would prevent weeds from growing for several weeks. That article says "It is rain-fast within minutes of application" and "It becomes biologically inactive upon contact with soil". Would something like this really be able to prevent weed growth weeks later? Soil tests, BTW, are out of the question due to cost. 24.93.116.128 (talk) 00:57, 12 August 2009 (UTC)
- You wouldn't get lines of dead plants from a rocket, would you? --Tango (talk) 23:06, 11 August 2009 (UTC)
- Responding to the original question - there is a product called Ortho Ground Clear that says it will prevent growth for up to a year. It is freely available at most US hardware and home improvement stores, and I'd imagine there are similar products from other manufacturers. The active ingredients seem to be glyphosate, which also becomes inactive upon contact with soil, and would cause the quick kill of any plants; and imazapyr, which I deduce would be the compound that adds the year long growth prevention. --LarryMac | Talk 12:04, 12 August 2009 (UTC)
- Glyphosate is a slow-acting weedkiller - it takes at least a week or two before treated plants show visible signs of wilting. For immediate results you need something like Paraquat. AndrewWTaylor (talk) 12:52, 12 August 2009 (UTC)
- I'm genuinely confused - what is in Roundup that makes plants wilt within a couple hours? --LarryMac | Talk 13:52, 12 August 2009 (UTC)
- Likely a good surfactant that delivers the glyphosate more quickly. I would have just answered this question with "Roundup" in the first place. Specially since I know how to get the Roundup that farmers use, approx 10x the concentration for consumers. Franamax (talk) 16:55, 12 August 2009 (UTC)
- I'm genuinely confused - what is in Roundup that makes plants wilt within a couple hours? --LarryMac | Talk 13:52, 12 August 2009 (UTC)
- Glyphosate is a slow-acting weedkiller - it takes at least a week or two before treated plants show visible signs of wilting. For immediate results you need something like Paraquat. AndrewWTaylor (talk) 12:52, 12 August 2009 (UTC)
- What a dick move that was! You have my sympathies. --Sean 14:32, 12 August 2009 (UTC)
- Poisoning the earth isn't vandalism, it's war. Vranak (talk) 15:09, 12 August 2009 (UTC)
- There are weedkillers that prevent regrowth for many months. Some examples are simazine and amitrole. These chemicals remain in the soil and are taken up by the roots of any new growth. Dbfirs 17:57, 12 August 2009 (UTC)
- Yes but when someone else is treating your garden with simazine? Vranak (talk) 19:41, 12 August 2009 (UTC)
Thermal cleaning of high carbon steel
In our research we need to reduce organic contaminants to a very low level. With aluminum implements, we routinely do this by baking them in air at a few hundred degrees C to force any organic compounds to boil away as CO2 and similar gases. (Note that this is not just about killing microbes, but actually removing their organic residues.)
Now I am trying to do something similar with a new tool that is high carbon steel. However, if I use the same settings as I do for aluminum, the iron in the steel will oxide (essentially causing the tool to rust). Obviously that's no good. Does anyone know how hot one can make steel before it begins to oxide significantly? Dragons flight (talk) 23:41, 11 August 2009 (UTC)
- Surely a few hundred degrees will be safe? Aren't oven wire racks made out of steel? Unless you are talking about some oven that goes over 400 deg c. I would think 200 - 300 deg would not cause any reaction from the steel.. I suppose you're after something a bit more assuring then someone's opinion. Vespine (talk) 00:06, 12 August 2009 (UTC)
- Could be oven racks are coated steel? Otherwise they would rust if you washed them. Googlemeister (talk) 16:39, 12 August 2009 (UTC)
- Well my oven actually goes to 1000 C, but experimentally, 350 C seems to be too hot for this particular tool. Regardless of people's opinion, I'll obviously be testing it, but it will save me some time if I have a decent idea of roughly where the limit is. Your comment about ovens is a good one. It would be rare to see an cooking oven much over 250 C, and I suspect you are right that they use some kind of steel. Dragons flight (talk) 00:27, 12 August 2009 (UTC)
- This book (US Bureau of MInes) says that steel gauze heated to 'below bright red heat' has 'no serious oxidation'.
Special atmospheres (dry, neutral gases I'd guess) are sometimes used for such purposes. Maybe you can call a sword-making expert? Twang (talk) 07:20, 12 August 2009 (UTC)
- I don't really know much about it but think you ought to try make a sacrificial anode (I know these are normally for wet lower temp rust). It is possible it is only rusting because you are using a less reactive metal to hold it? Anyway try clamping a bit of zinc to it and heating them together? Otherwise I think you would need more info on the type of steel to guess a temperature--BozMo talk 09:56, 12 August 2009 (UTC)
- We discussed a boiler explosion on the steamship Norway at this Ref Desk, above. See the "Conversions" thread. The steel of the boiler operated at 538F. Chemical were used to keep oxygen from corroding the steel. So look into techniques used with modern superheat boilers. Boilers with superheated steam can get quite hot. Boiler says the superheat tubes may get to 1600C. Chemical, some of the toxic, may be used to scavenge oxygen. Edison (talk) 15:30, 12 August 2009 (UTC)
- Just guessing here, but what about acid-pickling the steel instead? Then distilled water wash and mild drying. Franamax (talk) 16:59, 12 August 2009 (UTC)
August 12
Southern New Zealand
Do New Zealand usually get snow in the south? the south tip is 47 degrees away from equator, since it has marine climate I don't think it can get snow at land basin level. Can summer get up to like 70 F?--69.229.108.245 (talk) 00:45, 12 August 2009 (UTC)
- Do you mean south island or the south of the south island? A lot of the south island gets snow in winter, they have permantent glaciers and the whole works. You're right about avereage summer temps being around 70f. Vespine (talk) 00:55, 12 August 2009 (UTC)
- I mean south island. Land basin level like Irvine, CA ground level not moountain. I thought it is unlikely to get snow in valley-basin level, just mountain gets permanent glacier level.--69.229.108.245 (talk) 01:34, 12 August 2009 (UTC)
- Looks like it snows all the way down to sea level -just not often.[21] 75.41.110.200 (talk) 01:45, 12 August 2009 (UTC)
- The record high temperature for Christchurch is 42 C (108 F). —Preceding unsigned comment added by 75.41.110.200 (talk) 02:02, 12 August 2009 (UTC)
- Punta Arinas is 53 South, the tip of new Zealand is 47 South in latitude. They don't get much snow, just occassionally (not every year) but bone-chilly!--69.229.108.245 (talk) 02:07, 12 August 2009 (UTC)
- In Queenstown not much snow this year. Avg. is like 40s this winter, avg low of low 30s. Is just enough for oranges to freeze.--69.229.108.245 (talk) 02:11, 12 August 2009 (UTC)
- Take a look at [22] or older dates [23] e.g. [24] and reach your own conclusions. You may be also interested in the individual monthly summaries [25]. Sadly this does not provide stuff like the mean temperatures for places other then a few main centres but you can get older data at [26], e.g. [27]. Beyond the data in the summaries, there are is no per location data for snowfalls that I'm aware of probably because you're right, it happens infrequently enough that it isn't of great interest to many people Nil Einne (talk) 08:41, 12 August 2009 (UTC)
- In my 4 years in Dunedin (2004-2007), every year we had at least light snowfalls at sea level. In particularly cold years it can settle up to 5cm or so for a couple of days. It snows on the beaches too. Aaadddaaammm (talk) 13:26, 12 August 2009 (UTC)
For a long time I always wonder what is a hot ice in Uranus and neptune's liquid layers. Is it a semi-solid junks? Does slush mean tarlike substance or I don't know what. Some scientist beielve Uranus and Neptune's mantle is made of molten rock, water and ice thoguh--69.229.108.245 (talk) 03:30, 12 August 2009 (UTC)
- The sections Uranus#Internal_structure and Neptune#Internal_structure give pretty good descriptions. They say that each planet has a small core of molten rock and metal (since those are the densest) and then a liquid mantle above that of mostly water, methane and ammonia. These chemicals are referred to as "ices" but that doesn't mean they're in a solid or slush form. See Volatiles. Rckrone (talk) 04:12, 12 August 2009 (UTC)
Speed of sound in a fluid
According to my physics textbook, the speed of sound in a fluid is v=sqrt(B/ρ), where B is the Bulk modulus and ρ is density. How is this derived? Mo-Al (talk) 05:34, 12 August 2009 (UTC)
- For one way to derive it, see section 31.4 in this book. Red Act (talk) 06:24, 12 August 2009 (UTC)
- Conversely, one might say that the microscopic bulk modulus is defined by the macroscopic fluid speed. It depends which direction you consider more "basic" or "fundamental" - I think most fluid physicists would say that the bulk modulus, being essentially an implication of the molecular theory of gas (or liquid), is more fundamental than the sound speed. Nimur (talk) 20:58, 12 August 2009 (UTC)
IQ and Dunning-Kruger effect
Are people with a high IQ less prone to the Dunning-Kruger effect and Impostor syndrome? NeonMerlin 07:38, 12 August 2009 (UTC)
- AFAIK the complexe d'imposture is more likely to affect people with a high IQ than others since it tends to affect people who are over-achievers to the point where their own success seems surreal to them. However, I am just basing the response on what I was taught on a "being an executive mentor" course a decade ago so this may be wrong (plus these people read psychology which is pretty sloppy as a science from the point of view of establishing "facts")--BozMo talk 09:40, 12 August 2009 (UTC)
- Reading the article on the Dunning-Kruger effect however seems to indicate that it is exactly the opposite: specifically it is much more likely to affect low IQ individuals. Given that these two are obvious opposites I hope this isn't a homework question. --BozMo talk 09:45, 12 August 2009 (UTC)
- This paper seems to be relevant.--droptone (talk) 12:28, 12 August 2009 (UTC)
Viewing the Perseids meteor shower from Netherlands
I've read the article on Perseids meteor shower. It says that the meteors are more visible in the Northern Hemisphere. I'm in the Netherlands. What I'd like to know is where in the sky to look towards. I can look mainly north, toward the big dipper and northern star, or any other direction. I can look straight up, or more towards the horizon. Last night, I saw one meteor, in about 5 minutes watching, and it went directly across the face of the Big Dipper, more or less in the northeastern sky. Thanks if you have advice. —Preceding unsigned comment added by 80.101.134.43 (talk) 08:50, 12 August 2009 (UTC)
- As noted in the article on the Perseids, the meteors of this shower appear to come from the constellation Perseus - so you want to be looking in that direction. To find out where the constellation Perseus is, look on a star map (for instance, here) - in the evening, Perseus will be low in a NNE direction, below Cassiopeia. — QuantumEleven 09:40, 12 August 2009 (UTC)
- If you find somewhere with a clear sky and not too much clutter on the horizon (ie not in the middle of tall buildings) - then head out there during the peak of the shower, you won't need to know which direction to look - it'll be pretty obvious as the meteors streak past. If Perseus is low in the sky for you (as QuantumEleven says) then the meteors will be just grazing the atmosphere. That means that you may not see so many as when Perseus is high in the sky - but those that you do see should leave long, impressive trails across a large fraction of the sky. SteveBaker (talk) 11:27, 12 August 2009 (UTC)
- I usually lie on my back and look straight up. That way you catch lots of meteors with your peripheral vision. They can be a very long way from the radiant. Of course once the moon is up you need to look away from it, otherwise it will "blind" you.--Shantavira|feed me 11:50, 12 August 2009 (UTC)
- On the BBC yesterday it said if you find the Moon and look about 60 degrees away from it you should see the meteors quite clearly. I can't remember which direction to turn away from the moon, but you will of course be able to experiment for yourself! --TammyMoet (talk) 17:25, 12 August 2009 (UTC)
Time Dilation with Radioactive Elements.
I'm not too well educated in this stuff but from what I get time is dilated (slows down) for a observer moving with a speed v relative to an observer at rest (or otherwise). I know this has been confirmed with ultraprecise clocks on planes. I just was wondering if a guy gets on a plane with 100 grams on C-14 and goes at a speed so that each second for him is 2 seconds for an observer at rest (which I'm just estimating would be sqrt(.75c)). After 2 halflifes of C-14 for the observer at rest (11460 years) would there be 50 grams of C-14 (which means only one halflife worth of decay) left for the guy on the plane. I mean this just to be roughly 50 grams because I think that half-lifes aren't exact- that you can't exactly predict whether it decays or not (Schrodinger's cat?). Everything tells me it should be 50 grams but for some reason I was just curious. Has any test like this been done? 76.94.88.196 (talk) 09:10, 12 August 2009 (UTC)
Yes. The half-life is determined in the rest frame of the decaying element. The observer at rest will indeed have to wait two half-lifes to see 50 grams of C14 decay.
This is observed experimentally with muons in cosmic radiation : the muon is a very short-lived particle which is created in the upper atmosphere by cosmic radiation. Judging from the muon half-life, you would not expect the muon to reach the earth's surface, since it will have decayed long before that. However, the muons are very fast, and their time goes slower than ours. This is why muons do reach the earth's surface. —Preceding unsigned comment added by 81.11.170.162 (talk) 09:43, 12 August 2009 (UTC)
- I believe there have also been experiments run in particle accelerators with decaying particles that verify the predictions of special relativity very precisely. --Tango (talk) 16:00, 12 August 2009 (UTC)
- Ok thanks Tango that was what I was looking for. I knew about the muons but for some reason I kept thinking the radioactive elements would ignore special relativity (!?). 66.133.202.209 (talk) 16:34, 12 August 2009 (UTC)
Purpose of cylinder at back of Renault FT-17 tank
From the Humanities RD:
What is the purpose of the "tail" apparatus on this Renault FT-17 tank, including the cylinder and chains? (This tank is exhibited in the Compiègne Forest at the location where the armistice of the First World War was signed.)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/07/Renault_FT17_IMG_8417.jpg/220px-Renault_FT17_IMG_8417.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/73/Renault_FT17_IMG_8416.jpg/220px-Renault_FT17_IMG_8416.jpg)
David.Monniaux (talk) 10:27, 12 August 2009 (UTC) —Preceding unsigned comment added by Quest09 (talk • contribs)
- The tail bit was used to aid the tank in crossing trenches. Bear in mind that the motor was located at the rear of the vehicle. Thus the tank could have moved its unsupported front over the gap of the trench without "toppling" over. I could not find any information on the purpose of the barrel and the chains. --Cookatoo.ergo.ZooM (talk) 11:00, 12 August 2009 (UTC)
- The barrel and chains look kind of like a small, unassembled Mine flail. Very thin though. Fribbler (talk) 11:04, 12 August 2009 (UTC)
- Yes, but this tank is from Great War and mine flail, according to the article, were first used in the WWII.Quest09 (talk) 11:10, 12 August 2009 (UTC)
- Hmmm. No other pictures I found had these on it. Perhaps it was simply a spare fuel tank and tow-chains (the chains do have hooks) for salvaging damaged vehicles? Fribbler (talk) 11:16, 12 August 2009 (UTC)
- Yes, but this tank is from Great War and mine flail, according to the article, were first used in the WWII.Quest09 (talk) 11:10, 12 August 2009 (UTC)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/bb/FT-17-argonne-1918.gif/200px-FT-17-argonne-1918.gif)
- The barrel doesn't appear to be a part of the tank per-se. None of the other pictures of the tank in our article show a barrel there. In the picture to the left here, you can see that there is a bunch of other stuff tied on at the back of the vehicle. I suspect that the crew simply used it as a place to conveniently stow things that they didn't have room for inside. (They were pretty cramped in there!) The barrel has "OIP" and then "30" written on the top. I could believe that it's a 30 litre barrel...but I have no idea what "OIP" means. Similarly, the chain (there is only one - the thinner one in the background is just a part of the exhibition area) may just be a tow chain or something - it has hooks at either end, so that's pretty likely. Those early tanks got stuck and broke down a LOT - carrying a tow chain would have been a good idea! These photos from Compiegne are really nice - they should be in our article about the tank somewhere. SteveBaker (talk) 11:19, 12 August 2009 (UTC)
- OIP may be 'Omnium International des Pétroles', a french company formed in 1911, though I can't find much more about it. Mikenorton (talk) 12:06, 12 August 2009 (UTC)
- I would say spare fuel for the barrel. The tail can be unbolted and let down, then have a barrel rolled on. Then you could baulk the tail with a 4x4 and just back the tank up to close the tail. Once you get up close to the battle zone, you siphon out the fuel in the barrel. And if you have to store fuel outside the vehicle in battle conditions, well that's as far away as you can carry it from the people.
- It does seem that the tail is for climbing embankments/trenches. On the chain, I got nuthin'. It could be used to tow a weight with ground pressure closer to human values to set off anti-personnel mines, indeed if that barrel was filled with sand, it would do quite well as a mine-finder. Franamax (talk) 12:03, 12 August 2009 (UTC)
- How about shooting the fuel drum, and then shoot the crew when they bailed out of the tank? I doubt it would be tenable inside with all that petrol running down the back. But carrying spare fuel on the back would beat running out of fuel. Maybe they refueled when they arrived at the battlefield but left the tank behind when they assaulted the trenches. Edison (talk) 15:23, 12 August 2009 (UTC)
- External fuel drums are not uncommon in tanks. You use the external tank to get from the friendly area to the combat area. Then, you discard the tank. Now, once in the combat area, you have a full tank of fuel and all those tanks who didn't have an external tank used up half their fuel to get to the combat area. There is very little risk of someone attacking the external tank since it is only used in friendly areas. As a side benefit, those with external tanks are allowed to expend nearly all their internal fuel during combat. All they need to do is leave the combat area and then a new external tank can be attached to get all the way back to the tank's unit. -- kainaw™ 15:28, 12 August 2009 (UTC)
- If I recall, even some of the more modern Soviet tanks (T-72 perhaps?) used oil drums as external fuel tanks, with a switch to jettison the things if you found yourself in combat. Googlemeister (talk) 15:32, 12 August 2009 (UTC)
- External fuel drums are not uncommon in tanks. You use the external tank to get from the friendly area to the combat area. Then, you discard the tank. Now, once in the combat area, you have a full tank of fuel and all those tanks who didn't have an external tank used up half their fuel to get to the combat area. There is very little risk of someone attacking the external tank since it is only used in friendly areas. As a side benefit, those with external tanks are allowed to expend nearly all their internal fuel during combat. All they need to do is leave the combat area and then a new external tank can be attached to get all the way back to the tank's unit. -- kainaw™ 15:28, 12 August 2009 (UTC)
- Correct. There was a T-72 on display when I was at 29 Palms. It had an external tank. I do not know of any modern American tanks that have external fuel capability. -- kainaw™ 15:34, 12 August 2009 (UTC)
- It seems the M1 Abrams at least does (that article says "Another was put out of action in an incident when fuel stowed in an external rack was struck by heavy machine gun rounds") and this article gives the M1's range "with external tanks". -- Finlay McWalter • Talk 17:14, 12 August 2009 (UTC)
- Even in a combat situation, it still seems preferable to have the majority of the fuel stored outside of the tank. If the fuel is hit, the tank might be stranded with limited range (only what is inside its internal tank); but the majority of the damage would be dissipated without destroying the tank and injuring its crew. Nimur (talk) 20:32, 12 August 2009 (UTC)
stringing power strips
When there is a shortage of outlets, and you have a lot of things to plug in, is there any danger in stringing together several power strips to meet the needs? --Halcatalyst (talk) 12:25, 12 August 2009 (UTC)
- It depends on the circuitry you have in your house, and it's capabilities. At some point, for any circuitry, with enough things turned on and drawing current you are going to trip the circuit breaker, or fuse or whatever. When we first moved into our house a few years ago, we couldn't run the microwave and toaster at the same time without tripping the breaker for the kitchen, so we had someone re-do some of the electrical work. —Akrabbimtalk 12:35, 12 August 2009 (UTC)
- So long as you don't exceed the current capacity of either the circuit or each strip, and assuming all the ground pins work and there's no bare wires or other problems, you should be fine. If you are plugging in a lot of varying loads or things you use all at once, you need to do some math to be sure you aren't causing an overload. Check the number of watts for each device, add them up and divide by a hundred. Compare that to the number of amps of the fuse or circuit breaker and you should be OK. For instance, if you have a 1200-watt heater and a 40-watt light, (1200+40)/100 = 12.4, which would be fine on a 15-amp circuiot. However, plugging all of your rock band's equipment into one string of power strips could be a bad idea. Franamax (talk) 12:42, 12 August 2009 (UTC)
- Note that this calculation only works if you live in places with 115V mains voltage (eg the US). For 220V mains voltage, divide by 220. — QuantumEleven 14:22, 12 August 2009 (UTC)
- Fire. It is always a bad idea to plug a power strip into another power strip and, although I suppose it depends on where you are, I would imagine in most places it's against the fire code. At least, I know it is in New York. If you really need more than 2x6 outlets, you should consider extension cords to other outlets nearby or getting extra ones installed for safety and legal reasons. ~ Amory (user • talk • contribs) 13:04, 12 August 2009 (UTC)
- Out of curiosity, how does plugging several power strips into each other increase the risk of fire? — QuantumEleven 14:23, 12 August 2009 (UTC)
- more plugs = more 'opportunities' for failure? 194.221.133.226 (talk) 15:10, 12 August 2009 (UTC)
- It can cause Power quality problems due to the increased resistance in the ground path. I knew an audio/video recording studio which developed unacceptable hum (in the analog days) due to the high ground resistance from the connections of plugs when they octopussed the wiring via power strips. The problem went away when every piece of equipment was grounded to the same point and only hard wired outlets were used. Having many outlets fed from one outlet increases the risk of a fire, since the breaker might not work, the fuse might be oversized (30 amp fuse protecting a circuit rated at 15 amps), or there might be an oxidized high resistance connection in the wiring, or other problems.. Electrical safety codes were written in blood, so to speak. Edison (talk) 15:18, 12 August 2009 (UTC)
- When I was about 5, i found where my parents kept all the double adapters, so i thought it would be fun to plug then all into the wall. I think I got to about 4 or 5 until i got a big shock. Learned that lesson the hard way. Vespine (talk) 02:05, 13 August 2009 (UTC)
- The term de jour is Daisy chain (electrical engineering). --Tagishsimon (talk) 02:10, 13 August 2009 (UTC)
- When I was about 5, i found where my parents kept all the double adapters, so i thought it would be fun to plug then all into the wall. I think I got to about 4 or 5 until i got a big shock. Learned that lesson the hard way. Vespine (talk) 02:05, 13 August 2009 (UTC)
Transmission of swine flu
Is it that H1N1 flu may get transmitted into your body ONLY when you come in contact (about 6 feet close) with a suspected case of SWINE FLU ,or flying in the air it may enter inside?121.245.156.186 (talk) 14:57, 12 August 2009 (UTC)
I think, I may be wrong, that H1N1 cannot live on surfaces very long and that contact is the main way of spreading. Dogposter 15:14, 12 August 2009 (UTC)
- "This is thought to occur in the same way as seasonal flu occurs in people, which is mainly person-to-person transmission through coughing or sneezing of people infected with the influenza virus. People may become infected by touching something with flu viruses on it and then touching their mouth or nose."[28] --98.217.14.211 (talk) 15:15, 12 August 2009 (UTC)
- Our article on influenza says "The length of time the virus will persist on a surface varies, with the virus surviving for one to two days on hard, non-porous surfaces such as plastic or metal, for about fifteen minutes from dry paper tissues, and only five minutes on skin". Gandalf61 (talk) 15:17, 12 August 2009 (UTC)
- It should also be reemphasized that H1N1 or "Swine flu" is entirely "typical" in terms of being a flu; it is not more contageous, more virulent, and does not cause worse symptoms than any other standard strain of Influenza A that come around every year. The only problem is that, as a relatively rare and new strain, we don't have the vaccines for it yet. But otherwise, it is just the flu. --Jayron32 01:39, 13 August 2009 (UTC)
- Reliable source please? Stats at the 2009 flu pandemic article seem to indicate indicate higher mortality among the infected than typical seasonal flu. I suppose this could be the gap between the number actually infected and those going to a hospital or doctor and getting tested, but mild cases of seasonal flu also are likely to forgo doctor visits. As for transmissability, it continued to spread in the Northern Hemisphere countries through the summer when the seasonal flu drops off. It is not a matter of just not having the vaccines. Edison (talk) 03:20, 13 August 2009 (UTC)
- It's not just lack of vaccines, it is lack of natural immunity. I've seen estimates that about a third of people will get swine flu over the next couple of years, a given strain of seasonal flu won't infect anywhere near that many people and that isn't because of vaccines - in the UK, at least, only vulnerable groups are vaccinated against seasonal flu. If you have had one strain of flu you will generally have some degree of immunity to other similar strains. I don't think there are any strains similar to swine flu in circulation, so very few people have any significant immunity to it. Of course, that doesn't change the fact that it is just flu and a few days bedrest will cure it in the vast majority of people. --Tango (talk) 02:52, 13 August 2009 (UTC)
- And while right now it is "just the 'flu", the reason the World's epidemiologists are so worried is that studies of its genetic code reveal that it has far more potential than the average strain of 'flu to mutate into something (a) much more contagious and (b) much more deadly, as did the H1N1 Spanish 'flu of 1918, which it more closely resembles than most seasonal 'flues. 87.81.230.195 (talk) 03:44, 13 August 2009 (UTC)
Bluetooth Marketting
What is meant by bluetooth marketting???where is it used???Need some details on it please.thanks. —Preceding unsigned comment added by Gd iitm (talk • contribs) 16:26, 12 August 2009 (UTC)
Check out Bluetooth marketing. Aaadddaaammm (talk) 16:47, 12 August 2009 (UTC)
It doesnt give the exact details on what is meant by bluetooth marketing and the software used in it.Pls help —Preceding unsigned comment added by 203.199.213.130 (talk) 18:28, 12 August 2009 (UTC)
Grantt Chart
hey friends,
wiki dosent contains anyting about grantt charts.i m facing some problems in understanding a problem on grantt chart. please help me how to understand it. a grantt plan with a 80% gurantee is used on a job that is 30% process controlled.The plan uses a standard hourly rate of Rs20 and a bonus rate of Rs 25 per hour.the standard time for this job is 0.1 hourper piece.determine earnings per day(8 hour) of work,if 85 pieces were produced on a given day.comment on merit of plan.
SCI-hunter (talk) 12-8-2009 —Preceding unsigned comment added by SCI-hunter (talk • contribs) 17:18, 12 August 2009 (UTC)
- Do you mean Gantt charts? --TammyMoet (talk) 17:22, 12 August 2009 (UTC)
How to cause hypomania
Are there any known methods for causing hypomania in oneself or a willing subject? NeonMerlin 17:39, 12 August 2009 (UTC)
- This is not medical advice, but the symptoms sound a lot like someone who has done quite a bit of cocaine. --98.217.14.211 (talk) 18:13, 12 August 2009 (UTC)
- "Induced Hypomania" is usually caused by anti-depressants. One similar situation where we get a similar profile of signs and symptoms would be a person who has just achieved something, be that passed an exam, completed a marathon etc. Fribbler (talk) 18:22, 12 August 2009 (UTC)
pluto
When does NASA expect to start sending back photos of pluto? How large of a window do they have to get good high res photos? Googlemeister (talk) 19:39, 12 August 2009 (UTC)
- (ec) This should help with your answer - New Horizons#Planned. The probe will make a pass at 11:47 UTC, July 2015. It will be traveling at 13.78 km/s, or about 31,000 miles per hour, so the window is probably not very large, especially given it will be only 10,000 - 14,000 km away at that time and will flyby Charon, Hydra, and Nix within 15 minutes. They already have a picture, but it ain't exactly hi-res... File:112806_pluto_animation.gif. ~ Amory (user • talk • contribs) 20:25, 12 August 2009 (UTC)
- I assume you're talking about the New Horizons mission. It arrives at Pluto on July 14, 2015. Based on the length of its encounter with Jupiter, I'd guess there's a two- to four-week window of good observations for the Pluto encounter. — Lomn 20:26, 12 August 2009 (UTC)
- Ah, I see our article goes into much more detail at the Pluto flyby subsection. New Horizons will have greater resolution than Hubble for about three months. However, as for when NASA expects NH to start returning pictures of Pluto -- that first happened in 2006. — Lomn 20:28, 12 August 2009 (UTC)
Pain sensitive areas on human body
What are some surprisingly pain sensitive areas on the human body? My cuz told me if you took your finger and hook your perputrator in the mouth (outside the teeth) like a fish, it would be very painful for him. However I tried it on myself and its not that painful like a swift kick in the you-know-where for guys. --Reticuli88 (talk) 20:01, 12 August 2009 (UTC)
- Perhaps you could read Pressure point. There are a few mentioned in that article. Googlemeister (talk) 20:13, 12 August 2009 (UTC)
- Repeatedly twist a knuckle into the upper/mid sternum area (where the bone is near the surface) - or make a fist and rapidly rub your foreknuckles up and down the same area. Surprisingly painful. --Kurt Shaped Box (talk) 22:03, 12 August 2009 (UTC)
- I really like going for the inner wrist or inner elbow. If someone's infringing on your space it's often with their arms; these are the two soft, nerve-y points that are thereby exposed. You squeeze, they feel pain, you release, they are fine. No lasting damage. Vranak (talk) 04:23, 13 August 2009 (UTC)
Fat joe
Would it be possible to 'brew' coffee in a fat (for instance olive oil or clarified butter) rather than in water? Is this ever done for culinary purposes? If the boiling point of olive oil is so much higher than that of water, it seems to me that it would be a better substrate for coffee, because the grounds would rech a higher temperature without burning. I would prepare it in a pan, as if I were making a roux, and keeping the temperature a bit below 100 C. Then I would strain the oil to remove the grounds. Having produced coffee oil (or coffee butter), I can't think of what use it might be put to. I guess you could use it as a flavoring, or allow the butter to cool and use it as a spread. Would it be fully caffeinated? LANTZYTALK 20:07, 12 August 2009 (UTC)
- It will probably wreck the plumbing of your coffee machine if it is a drip or percolator design. Also, these machines need to heat the liquid up to steam; I don't know if oil will vaporize in a way that will flow through the plumbing. Maybe an all-passive device such as a Moka pot (not a mocha pot!) would be a better maker for your purposes. I'd still worry about gumming up the fluid paths with oily residue; it will be tough to clean and your future coffee will taste weird until you get rid of the residue. The coffee flavors, including the caffeine, are present in the fat/oil of the coffee bean, so they should dissolve nicely if you can get hot oil to flow over them. However, most culinary uses will just grind the coffee very very finely (finer than espresso) and mix it directly into a cake-batter or other food item. Nimur (talk) 20:37, 12 August 2009 (UTC)
- I wouldn't be using a coffee maker or any such device. To quote myself, "I would prepare it in a pan, as if I were making a roux." LANTZYTALK 22:39, 12 August 2009 (UTC)
- My apologies for asking a question within a question, but it seemed relevant so I thought I'd go ahead: would the nature of the solvent used to do the brewing (i.e. polar/non-polar) be important? Basically, would 'brewing' coffee in oil cause the caffeine (and other chemicals) in a standard cup of coffee to be extracted from the bean in the same way (or even at all) that using water would? If so, how does the extraction proceed chemically? Korokke (talk) 21:59, 12 August 2009 (UTC)
- Indeed, this is the kernel of my question. I am curious about the chemistry here. LANTZYTALK 22:39, 12 August 2009 (UTC)
- Water, being a semi-polar, semi-nonpolar solvent, works well at extracting coffee oils, and caffeine. Water laced with carbon dioxide is even better at pulling the caffeine out; this is called "decaffeination" and it works by a combination of physical and chemical solution (you probably cannot get a supercritical fluid in a frying pan - not even a pressure cooker). This 1972 patent suggests several edible esters which are "more effective". Oil will probably also dissolve the caffeine and other oils in the grounds. This report suggests some solvents will override the flavor of the coffee. This report suggests a water + oil + emulsifier mixture as even better than oil. Nimur (talk) 22:45, 12 August 2009 (UTC)
- Indeed, this is the kernel of my question. I am curious about the chemistry here. LANTZYTALK 22:39, 12 August 2009 (UTC)
polar day animals
During the polar day, how do animals know when to sleep? —Preceding unsigned comment added by 213.46.83.5 (talk) 21:54, 12 August 2009 (UTC)
- When they are tired? There's no reason for conventional circadian rhythm. "Hours" are a human invention; they have no real basis in nature, except that in some regions, they map well to an astronomical cycle; in polar regions, animals are adapted to the day-night cycle that they experience. Nimur (talk) 22:40, 12 August 2009 (UTC)
- Other than right exactly at the poles, there are always daily fluctuations in light levels, even if there is some light through the entire day -- the fluctuations grow larger the farther you move from the poles. I don't remember seeing any research specifically about polar animals, but it seems likely that they have heightened sensitivity to small fluctuations. ("Hours" may be a human invention, but 24-hour-ish circadian rhythms are built deeply into animal biology -- the genes that drive them in fruit flies have a strong resemblance to the genes that drive them in mammals.) Looie496 (talk) 22:57, 12 August 2009 (UTC)
- Even at the poles, there is variation - the earth's rotational axis is tilted remember. SteveBaker (talk) 02:48, 13 August 2009 (UTC)
X-rays
I just watched a programme on TV with airport border officials placing metal tubes through an X-ray scanning machine to check the internal contents. To me, these tubes appeared shiny, and thus light must have been reflected off the smooth surface of the tube (a property which makes metals appear shiny, right?) If X-rays are merely photons of a different wavelength to that of visible light, wouldn't they be reflected too, and thus the internal contents of the tube would not be visible since the photons would be reflected away from the surface? Even so, they did manage to view the contents, so how is this possible?
Regards, --—Cyclonenim | Chat 22:50, 12 August 2009 (UTC)
- Different wavelength of photons are absorbed by different materials. In order for a photon to be absorbed (and, in the case of a mirror, re-remitted), there has to be an electron that can use the photons energy to change to a different energy state. In individual atoms and non-conducting crystals, there are only discrete levels of energy an electron can have, and only photons that correspond to the change in energy between two such states can be absorbed or emitted. Metals are very good conductors and very shiny because their electrons are not in discrete orbitals, but merge into energy bands. Thus, for a photon with an energy that is much smaller than the widths of those bands, there will normally be an electron ready to absorb it. As the energy goes up, the chance to find a photon that can absorb the energy while staying in a given band goes down. X-ray photons are energetic enough that absorption is a relatively rare event, hence they can pass through many substances quite well. --Stephan Schulz (talk) 23:36, 12 August 2009 (UTC)
- For more information, see the transmittance, absorbance and reflectivity articles, which mention how all those optical properties depend on the incident photon’s wavelength (or frequency), and electronic band structure and band gap for more detailed information about the quantum mechanical properties of a solid that result in those optic properties. Red Act (talk) 23:58, 12 August 2009 (UTC)
- It's not hard to visualise: Imagine a piece of red tinted glass. You hold it up to the light - white light heads into the glass - only red light comes out. All of the other colors are absorbed or reflected. It's the same deal with your container - it lets "x-ray light" through and absorbs or reflects all of the "visible colors". SteveBaker (talk) 02:46, 13 August 2009 (UTC)
Goumi (Elaeagnus multiflora)
What is the highest daytime temperature that Elaeagnus multiflora can tolerate? Thanks in advance, --Dr Dima (talk) 23:45, 12 August 2009 (UTC)
Global warming
News always say global warming but we don't notice this much greenhouse gas. In Los Angeles-orange county climate changes hasn't been affect too much. Antartica, Greenland, and Artic Circle places haven't been affect too much. The winter is getting colder. In Miami, last winter got as cold as 30 F enough to freeze an orange solid rock. How is global warming affecting the climate changes? The place my 10th grade english teacher grew up in New Jersey start snow in late October then melt in April.--69.229.108.245 (talk) 23:55, 12 August 2009 (UTC)
- Of course we "notice" the increase in greenhouse gases - see Keeling curve. Greenland and the Arctic have been warming up very significantly, as has most of the rest of the globe. See this graphic. Climate trends are long-term - typically measured over 30 years or more, looking at one year or the other is insignificant. Have you read global warming and instrumental temperature record? --Stephan Schulz (talk) 00:31, 13 August 2009 (UTC)
- The Arctic circle not affected too much? The Arctic ice has been repeatedly setting records in recent years for how little ice it gets down to in the summer, and it’s expected to be completely ice-free during the summer within a matter of years, something that hasn’t happened in the last 700,000 years. It’s a very rare thing going on in the Arctic. See Arctic shrinkage. Red Act (talk) 01:09, 13 August 2009 (UTC)
- Your teacher, just like many, many people, is using their personal experience to make a judgment about whether global warming is real. Personal experience, unfortunately, is anecdotal evidence and is worth, basically, nothing, because they are using very few data points and reliance on human memory (as in, "Feels cold today. Hm."). Confirmation bias unfortunately results. Reading the scientific reports would be more valuable. Tempshill (talk) 01:53, 13 August 2009 (UTC)
- It's "global" warming - and "climate" change. It's not necessarily "local" warming or "weather" change. The distinction is crucial. On the average, the entire planet is getting warmer. That doesn't mean that some places won't get cooler - that's perfectly possible. The climate is changing - that's a long-term thing...the short term weather may change - or it may not. Some places in the world may get much warmer than the average - other places, not so much.
- For example, here in Texas, summer days vary from about 90 degrees (F) to about 110 degrees F. The "weather" can vary by about 20 degrees from day to day through the summer. But the average temperature of the planet has only increased by a few degrees. Let's say it's 3 degrees of average global increase: So, sitting here in Texas, watching the thermometer, we might start seeing extreme 113 degree days - breaking the occasional record - and we might find that there are no more 90 degree days - with the temperature only ever getting down to 93. But most of the time, the temperature goes up and down - if it's 105 today, does that prove there is global warming? Not really...105 degree days have always been here.
- You have to look at the big picture. That glaciers are retreating all around the world. That the ice at the north pole is vanishing at an alarming rate - that the south polar ice is breaking up - that plants and animals that are normally seen close to the equator are becoming more common further from the equator. That cold-loving plants are becoming harder to find in low lying areas and you can increasingly only find them higher up on mountain slopes. Trust me, this is very real - but that doesn't mean that all of a sudden you're going to get really, really hot weather every day...that's just not how it works. SteveBaker (talk) 02:40, 13 August 2009 (UTC)
Insane Plants
I am researching plants. Specifically plants with some exciting or dreadful, indeed, insane aspects to them. I have covered the corpse flower and things like henbane and datura and am looking to see if anyone can point me to some more. 216.6.159.83 (talk) 00:05, 13 August 2009 (UTC)
- Well I am very fond of all carnivorous plants. Plants that eat animals... insane! --98.217.14.211 (talk) 00:14, 13 August 2009 (UTC)
- "Mad cucumber" Ecballium elaterium is fun :) --Dr Dima (talk) 00:16, 13 August 2009 (UTC)
- Those are much more interesting than their stub article would suggest. There are a lot of videos of them if you look on YouTube for "exploding cucumber" and things like that. They don't just release their seeds in a way that can be "seen by the naked eye," they apparently shoot them out quite violently... [29] In general, the Rapid plant movement plants are pretty neat. --98.217.14.211 (talk) 00:36, 13 August 2009 (UTC)
- How about the mandrake, 'sprouted from the death-ejected sperm of a hanged man'? Adambrowne666 (talk) 00:44, 13 August 2009 (UTC)
- Mandrake (plant) aka Jihn's eggs = fun indeed. --Dr Dima (talk) 00:47, 13 August 2009 (UTC)
- In the "not so fun" category you can try Castor oil plant, curare vines (Abuta, Chondrodendron, also Strychnos) - all very poisonous. Try also cholla cactus, it's just nasty :) --Dr Dima (talk) 00:51, 13 August 2009 (UTC)
- There is also sensitive plant, which closes its leaflets when disturbed.CalamusFortis 03:18, 13 August 2009 (UTC)
- You might consider the plants depicted and described by Leo Lionni in his book Parallel Botany, the contemplation of which might well cause the contemplatee some mental distress. 87.81.230.195 (talk) 03:29, 13 August 2009 (UTC)
Why are some dishes so greasy?
Most oily dishes can be washed easily with soap, but some require dishwashing fluids. What's the diff? 67.243.6.13 (talk) 00:20, 13 August 2009 (UTC)
- Probably the composition of fat. Some fats solidify at room temperature, some don't. See Fat and saturated fatty acids. --Dr Dima (talk) 00:27, 13 August 2009 (UTC)
- You wash dishes with soap? Unless you guys use the word soap to mean some sort of dish soap, but I only use soap for my hands and in the shower. Everyone I know uses some sort of dishwashing liquid in the kitchen sink. Vespine (talk) 02:03, 13 August 2009 (UTC)
- In the USA, where the IP is from, we call dish soap "soap." A different kind of soap, but as you say, soap nonetheless. There are even kinds sold that claim to function as both dish and hand soap. ~ Amory (user • talk • contribs) 04:48, 13 August 2009 (UTC)
Hideous mermaid image
Ages ago, I found on the internet a black and white illustration, possibly an engraving, of a skrinkled up little corpse of a purported mermaid - not the Feejee Mermaid, but one less human, more ghastly. I wanted to use it on the cover page of something I'm writing, but foolishly I seem to have deleted it from my files. Can anyone find it for me? (I'm thinking now it may not have been a mermaid after all, but just some random scientific curiosity from a wunderkammer somewhere).
Thanks in advance.
Adambrowne666 (talk) 00:41, 13 August 2009 (UTC)
- A shrinkled up little corpse that’s more ghastly than the Fiji mermaid? That looks like a pretty ghastly shrinkled up little corpse to me. Red Act (talk) 00:56, 13 August 2009 (UTC)
- It's plenty skrinkled up, let me tell you. Adambrowne666 (talk) 01:01, 13 August 2009 (UTC)
- There is [this http://www.thegatherer.co.uk/html/The_Mermaid_The_Mirror_Saturday_November_9_1822.html], but it's probably not what you're looking for. I'm pretty sure that this is the FeeJee Mermaid before it became known by that name. It's uglier than the usual drawing, though. APL (talk) 01:39, 13 August 2009 (UTC)
- Thanks, APL, but yeah, not what I'm looking for - my uncertain memory tells me there wasn't much of a face at all, and if it was engraved, it was finer work, darker in hue. I think it predates the Feejee Mermaid by at least a century. Sorry, I realise how unlikely it is for this question to be answered. Adambrowne666 (talk) 02:25, 13 August 2009 (UTC)
- What about this little lady? LANTZYTALK 06:52, 13 August 2009 (UTC)
Ice Age
Does ice Age happen once every certain amount of time or ice age is non-stoppable matter like Greenhouse effect. Does Ice Age go away after certain time, or it is accumulative like global warming?--69.229.108.245 (talk) 02:55, 13 August 2009 (UTC)
- Have you read Ice age? You may also find Timeline of glaciation interesting. Global warming will go away after a certain time if we stop pumping extra greenhouse gases into the atmosphere, it might just take a long time and do a lot of damage along the way (especially if we trigger a runaway greenhouse effect as some people fear we are going to). --Tango (talk) 03:01, 13 August 2009 (UTC)