Jump to content

Towboard

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by BrownHairedGirl (talk | contribs) at 10:02, 16 February 2022 ({{Dead link}} tag on bare URL refs which return HTTP 404 or 410). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Towboard
A towboard being used by a NOAA archaeologist to search for shipwrecks in the Papahanaumokuakea Marine National Monument
UsesTowed diver search or survey
Related itemsDiver propulsion vehicle

A towboard is a piece of aquatic survey equipment consisting of a board attached to a rope that is towed by a surface vessel. It is used to tow one or more divers underwater at a constant depth to survey bottom features such as coral reefs. The diver may use a scuba set, or if only a snorkel, may remain at the surface, or travel underwater for around two minutes.[1]

Towboard survey at Midway Atoll

The towing vessel travels at approximately 1 to 2 miles per hour and may tow two divers, one with a camera pointing down, and other with a camera facing forward. The boat follows a depth contour to keep the towboard over a specific depth. The divers can also maneuver the board to maintain a more precise depth and avoid obstacles. A survey may cover up to nearly 2 miles over a period of around 50 minutes.

This type of surveying method is called a towboard survey, towed-diver survey,[2] and the manta tow technique, the latter named after the Manta Board, an oval towboard marketed for recreational use.[3][1] A variant is the SAM or "Single-armed Manta-board". This consists of a small board with a strap to secure and tow the diver by the forearm. This frees the other arm, allowing the diver to take notes on a pad held by the towing arm.[4]

The use of a towboard is considered safe for NOAA reef surveys by trained divers at depths where no decompression stops are required (down to approximately 90 feet).[5]

Towboards may be equipped with sensors to record the temperature and depth every few seconds and the tow vessel may have a GPS to record position. Position of the diver is approximate and must be calculated from the boat position, heading and towline length.[5][6][7]

References

  1. ^ a b "Sampling methods - AIMS". Archived from the original on 2015-03-27.
  2. ^ https://data.noaa.gov/dataset/cred-towed-diver-benthic-characterization-survey-at-niihau-main-hawaiian-islands-in-2010 [dead link]
  3. ^ "Field survey methods". Archived from the original on 2001-04-30.
  4. ^ Zimmerman, Kenneth D.; Burton, Thomas E (1994). "A Single-armed Manta-board as a New Diver-controlled Planing Board and Its Use for Underwater Surveys" (PDF). Marine Fisheries Review. pp. 12–16. Retrieved 13 June 2016.
  5. ^ a b "NOAA PIFSC – Towboard Diver Surveys". noaa.gov. 20 September 2021.
  6. ^ "NOAA's Coral Reef Conservation Program: What is a Towed Diver Survey?". noaa.gov.
  7. ^ "NWHI: Video: Tow Boarding". hawaiianatolls.org.