Jump to content

Project Ara

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Monkbot (talk | contribs) at 18:30, 25 January 2021 (Task 18 (cosmetic): eval 30 templates: hyphenate params (28×);). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Project Ara
File:Project Ara scattered parts.png
Ara smartphones with individual modules separated.
Also known asAra
DeveloperGoogle (formerly with Motorola through the Advanced Technology and Projects group)[1]
ManufacturerGoogle (individual modules and smartphone)
Product familyYes
TypeModular smartphone
Release dateCancelled[2]
Introductory price~US$100[3]
Operating systemAndroid
WebsiteOfficial website

Project Ara was a modular smartphone project under development by Google. The project was originally headed by the Advanced Technology and Projects team within Motorola Mobility while it was a Google subsidiary. Google retained the ATAP group when selling Motorola to Lenovo, and it was placed under the stewardship of the Android development staff; Ara was later split off as an independent operation.[1][4] Google stated that Project Ara was being designed to be utilized by "6 billion people": 1 billion current smartphone users, and 5 billion feature phone users.[5][6]

Under its original design, Project Ara was intended to consist of hardware modules providing common smartphone parts, such as processors, displays, batteries, and cameras, as well as modules providing more specialized components, and "frames" that these modules were to be attached to. This design would allow a device to be upgraded over time with new capabilities and upgraded without requiring the purchase of an entire new device, providing a longer lifecycle for the device and potentially reducing electronic waste.[7][8] However, by 2016, the concept had been revised, resulting in a base phone with non-upgradable core components, and modules providing supplemental features.

Google planned to launch a new developer version of Ara in the fourth quarter of 2016, with a target bill of materials cost of $50 for a basic phone, leading into a planned consumer launch in 2017. However, on September 2, 2016, Reuters reported that two non-disclosed sources leaked that Alphabet's manufacture of frames had been cancelled, and may be licensed to third parties; and that a spokesman declined to comment on the rumors.[9][10]

Structure and features

Google intended Project Ara to lower the entry barrier for phone hardware manufacturers so there could be "hundreds of thousands of developers" instead of the existing oligarchy of phone manufacturers.[11]

Ara frames[12]
Frame Size Rear module slots
Mini 118 × 45 × 9.7 mm
(4.65 × 1.77 × 0.38  in)
2 × 5
Medium 141 × 68 × 9.7 mm
(5.55 × 2.68 × 0.38  in)
3 × 6
Large 164 × 91 × 9.7 mm
(6.46 × 3.58 × 0.38  in)
4 × 7

The Project Ara concept consisted of modules inserted into metal endoskeletal frames known as "endos". The frame would be the only component manufactured by Google.[11] The frame was the switch to the on-device network linking all the modules together. Google planned two sizes of frames on launch; a "mini" frame about the size of a Nokia 3310 and a "medium" frame about the size of a Nexus 5.[12] Google also planned a "large", phablet frame about the size of a Samsung Galaxy Note 3 to be released in the future.[12] Frames have slots on the front for the display and other modules. On the back are additional slots for modules. Each frame was expected to cost around US$15.[13][14][15] The data from the modules can be transferred at up to 10 Gbit/s per connection. The 2×2 modules have two connections and would allow up to 20 Gbit/s.

Modules would provide common smartphone features, such as cameras and speakers, but could also provide more specialized features, such as medical devices, receipt printers, laser pointers, pico projectors, night vision sensors, or game controller buttons. Each slot on the frame accepted any module of the correct size. The front slots are of various heights and took up the whole width of the frame.[12] The rear slots had standard sizes of 1×1, 1×2 and 2×2.[12] Modules were to be hot-swapped without turning the phone off.[11] The frame also included a small backup battery so the main battery can be hot-swapped.[11] Modules were originally to be secured with electropermanent magnets, but this was replaced by a different method. The enclosures of the modules were planned to be 3D-printed, but due to the lack of development in the technology Google opted instead for a customizable molded case.[3][11]

Google intended to sell a starter kit where the bill of materials is US$50 and includes a frame, display, battery, low-end CPU and WiFi.[3] Google planned to provide an open development process for modules, and would not have required manufacturers to pay a license fee.[5] Modules were to be available both at an official Google store and at third-party retailers. Similarly to Android apps, an Ara device would be configured by default to only accept modules officially certified by Google, but users would have been able to disable this.[13]

Project team

Project Ara was developed and was led by Paul Eremenko,[11][16] who in 2015 became CEO of the Airbus Group Silicon Valley technology and business innovation center. The project fell under Regina Dugan, who runs Google's Advanced Technology and Projects (ATAP) organization. Both Eremenko and Dugan worked previously at DARPA, where Eremenko originated the fractionated spacecraft concept and ran the Adaptive Vehicle Make program before heading the Tactical Technology office. The core Project Ara team at Google consisted of three people, with most of the work being done by outside contractors, such as NK Labs, a Massachusetts-based engineering firm.[11] NK Labs then subcontracted the firm Leaflabs to do firmware development, and they later became the primary firmware developers in a direct contract with Google. The concept design of the Frame and Modules was created by NewDealDesign of San Francisco. That concept was selected from 11 different configurations analyzed by the joint team.[17] The company 3D Systems was contracted to experiment with 3D printing of electrical components, which could further the goal of mass customization.[11]

Development

Prior to its acquisition of Motorola Mobility in 2011, Google had previously acquired some patents related to modular mobile phones from Modu.[18] Initial exploration of this concept began in 2012 and work started on April 1, 2013.[11] Dutch designer Dave Hakkens announced the Phonebloks modular phone concept independently in September 2013. Motorola publicly announced Project Ara on October 29, 2013 and said they will be working collaboratively with Phonebloks although the original team, consisting of internal and external resources, continued working together without any change to its original design and technology.[19] Motorola went on a 5-month road trip throughout the United States in 2013 called "MAKEwithMOTO" to gauge consumer interest in customized phones.[11] Interested developers, testers, or users could sign up to be Ara Scouts.[19]

The first version of the developers' kit relied on a prototype implementation of the Ara on-device network using the Mobile Industry Processor Interface (MIPI) UniPro protocol implemented on FPGA and running over a Low-voltage differential signaling (LVDS) physical layer with modules connecting via retractable pins.[11] Subsequent versions were to be built around a much more efficient and higher performance ASIC implementation of UniPro, running over a capacitive M-PHY physical layer.[20] A near-working prototype of an Ara smartphone was demonstrated at Google I/O 2014, but it froze on the boot screen.[21]

In January 2015, Google unveiled the "Spiral 2" prototype, and that it planned to test market a later revision of the system in the U.S. territory of Puerto Rico later in the year. Google chose the region due to it having a large mobile phone market, and because it is still subject to U.S. telecommunications laws—allowing for continued correspondence with the FCC.[22][23][24] However, in August 2015, Google announced that the Ara pilot in Puerto Rico had been delayed indefinitely, and that the company would instead hold pilots in "a few locations" in the U.S. some time in 2016.[25][26]

At Google I/O 2016, the company unveiled a new development model, the "Developer Edition". The new iteration featured notable changes to the original concept; the device now consisted of a base phone with core components that cannot be upgraded, including the antenna, battery, display, sensors, and system-on-chip, and extensible with modules for adding features such as a secondary display or replacement cameras and speakers. Google announced that it planned to ship the Developer Edition in late 2016,[27] and perform a consumer launch of Project Ara in 2017.[28]

On September 2, 2016, Google confirmed that Project Ara had been shelved.[27]

Reception

Initial reception to an earlier but similar modular phone concept—Phonebloks—was mixed, citing possible infeasibility, lack of a working prototype, as well as other production and development concerns. Project Ara's launch followed shortly after the launch of Phonebloks and better addressed some of the production and development issues since it had OEM backing, but other issues were raised about the Project Ara modular concept.[citation needed]

Potential issues with the modular concept include a tradeoff between volumetric efficiency and modularity, as the framework interface holding the device would increase overall size and weight. Eremenko says modularity would create a difference of less than 25% in size, power, and weight to components, and he believes that is an acceptable trade-off for the added flexibility.[29] The current prototype is 9.7mm thick, slightly thicker than conventional smartphones.[11] Additional issues include regulatory approval; the FCC tests single configurations for approval, not modular configurations.[30] Google said the FCC "[had] been encouraging so far".[11]

See also

References

  1. ^ a b Nilay Patel (29 January 2014). "Google to keep Motorola's Advanced Technology group, including Project Ara modular phone". The Verge. Vox Media. Retrieved 30 January 2014.
  2. ^ Sam Byford (1 September 2016). "Google reportedly cancels Project Ara modular smartphone plans". The Verge. Vox Media. Reuters. Retrieved 24 January 2017.
  3. ^ a b c Kennemer, Quentyn (3 March 2014). "Project Ara presented on video at LAUNCH conference; new details revealed". Phandroid. Retrieved 4 March 2014.
  4. ^ Pierce, David. "Project Ara Lives: Google's Modular Phone Is Ready for You Now". Wired. Retrieved 20 May 2016.
  5. ^ a b Russon, Mary-Ann (3 March 2014). "Could Google's $50 Project Ara 3D-Printed Device Change the Smartphone Market Forever?". International Business Times. Retrieved 4 March 2014.
  6. ^ Dieter Bohn. "Building blocks: how Project Ara is reinventing the smartphone". The Verge. Vox Media.
  7. ^ Byford, Sam (29 October 2013). "Motorola reveals ambitious plan to build modular smartphones". The Verge. Vox Media. Retrieved 29 October 2013.
  8. ^ Musil, Steven (29 October 2013). "Motorola unveils Project Ara for custom smartphones". CNET. CBS Interactive. Retrieved 29 October 2013.
  9. ^ "Google Reportedly Shelves Plans for Its Modular Smartphone". 2 September 2016.
  10. ^ "Exclusive: Google shelves plan for phone with interchangeable parts - sources". 2 September 2016.
  11. ^ a b c d e f g h i j k l m McCracken, Harry (26 February 2014). "Project Ara: Inside Google's Bold Gambit to Make Smartphones Modular". Time. Archived from the original on 2014-03-04. Retrieved 4 March 2014.
  12. ^ a b c d e "Google Project Ara Developer Conference". Project Ara. Retrieved 10 April 2014.
  13. ^ a b Summerson, Cameron. "Fascinating: Project Ara Team Member Gives Us The First Glimpse Of How The Product Will Work In Model Demo At LAUNCH". Android Police. Retrieved 4 March 2014.
  14. ^ Gannes, Liz (29 June 2014). "Meet Project Ara, the Modular Google Phone of the Future". Re/code. Retrieved 23 August 2014.
  15. ^ Chan, Norman (15 April 2014). "Tested Explains: How Google's Project Ara Smartphone Works". Tested. Retrieved 23 August 2014.
  16. ^ "Paul Eremenko talks about Project Ara in details". ModularPhonesForum. 2015-01-06. Retrieved 2015-01-06.
  17. ^ "Slashdot Interviews Marti Bolivar, Firmware Lead Working On Google's Ara Modular Smartphone". 2015-05-05. Retrieved 2016-09-09.
  18. ^ Reisinger, Don (2011-05-20). "Report: Google acquires Modu's mobile patents". CNET. Retrieved 2011-05-20.
  19. ^ a b Eremenko, Paul (29 October 2013). "Goodbye Sticky, Hello Ara". Motorola Mobility. Motorola Mobility. Retrieved 2013-10-29.
  20. ^ "Ara Developers' Conference". Project Ara website. Archived from the original on 2015-08-10. Retrieved 4 March 2014.
  21. ^ "Google "moonshot" group demos modular phone that (almost) actually works". Ars Technica. June 26, 2014. Retrieved June 26, 2014.
  22. ^ "Spiral 2 announced, first Project Ara model that will go on sale". PhoneArena. Retrieved 29 May 2016.
  23. ^ "Google's Project Ara Open Source Smartphone to Debut in the US in 2016". linux.com. 2015-01-28. Retrieved 2015-03-27.
  24. ^ "Google Unveils Spiral 2 Project Ara Prototype, Pilot Program in Puerto Rico". NDTV. Retrieved 29 May 2016.
  25. ^ "Google delays its Project Ara modular smartphone until 2016". The Verge. Retrieved 29 May 2016.
  26. ^ "Project Ara won't debut in Puerto Rico after all". The Verge. Retrieved 29 May 2016.
  27. ^ a b "Google confirms the end of its modular Project Ara smartphone". The Verge. Vox Media. Retrieved 2 September 2016.
  28. ^ "Google's Project Ara phone no longer upgradable, new dev units ship this fall". Ars Technica. Retrieved 29 May 2016.
  29. ^ Talbot, David (7 April 2014). "Why Google's Modular Smartphone Might Actually Succeed". MIT Technology Review. Retrieved 8 April 2014.
  30. ^ Ho, Joshua (29 October 2013). "Motorola's Project Ara: Phonebloks from an OEM". AnandTech. AnandTech. Retrieved 29 October 2013.